HYCT-MZBT-008 - Table Vevor - Free user manual and instructions

USER MANUAL HYCT-MZBT-008 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

RATTAN COFFEE TABLE USER MANUAL

MODEL NO.: HYCT-MZBT-008

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to co all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually Saving Half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

Rattan Coffee Table

MODEL NO.: HYCT-MZBT-008

Line drawing of a traditional Chinese wooden cabinet with lattice patterns and decorative panels (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of o user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you ag there are any technology or software updates on our product.

WARNING:

Please read this manual carefully before using the product. Failure do so may result in serious injury.

Please read and observe carefully all the assembly instructions before beginning assembly.

Unit should be assembled by two or more people.

DO NOT CLIMB

Please do not let your child climb on the product. If y kids or animals who like to climb, we highly recommend using the wall anchors and brackets/straps that come the package.

ASSEMBLY PRECAUTIONS

1. Assemble only according to these instructions. Improper assembly c create hazards.

2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.

3. Keep the assembly area clean and well-lit.

4. Keep bystanders out of the area during assembly.

5. Do not assemble when tired or when under the influence of alcohol drugs or medication.

6. The product capabilities apply to properly and completely assembled products only.

7. Assemble on a flat, level, hard and smooth surface capable of sa supporting the Rattan Coffee Table.

8. For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unwrap separate all parts in a clean work area.

SAVE THESE INSTRUCTIONS

USE PRECAUTIONS

TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:

1. This product is not a toy Do not allow children to play with or r item.
2. Do not exceed weight capacities, before moving.
3. Use only on a flat, hard and smooth surface capable of safely supporting a fully loaded Rattan Coffee Table.
4. Use as intended only.

Inspect before every use; do not use if parts are loose or damaged.

TECHNICAL SPECIFICATIONS

Model	HYCT-MZBT-008
Product Dimensions (LxWxH)(mm)	800*800*460
Net Weight(kg)	About 24.5

*Products such as specifications, appearance, and design are subject to modification without prior notice.

PACKAGE CONTENTS

Technical diagram showing seven labeled assembly steps of a metal panel or frame structure, with numbered components and internal patterns.

A X30 Ø5x35mm

B X30 Ø15x9mm

C X4 Ø12mm

D X6

E X27 Ø6x30mm

F X14 M5x40mm

G X2

H X8

I X70 M4x12mm

J X1 4mm

ASSEMBLY STEPS

Step1

A A A ④ X2

Step2

Technical diagram showing labeled components of a mechanical assembly with tool and component details

Step3

Technical diagram of a structural frame with labeled components and assembly steps, including tool insertion and component assembly instructions.

Step4

A A A A A E ③ A E A E ③ A A E X3 Ø6x30mm Ø5x35mm A X14

Step5

③ ③ ④ ⑤ ④

Step6

step6 A C X2 ⑦ A C ⑦ B ⑥ B ⑥ B ⑦ Tighten

Step7 Step8 H X8 I X32 M4x12mm

Step9

Technical diagram of a mechanical assembly with labeled components and a corresponding table showing dimensions and parts.

Step11

Technical diagram of a mechanical assembly with labeled components and exploded views

COMPLETION

Line drawing of a traditional Chinese wooden cabinet with geometric lattice patterns and decorative panels (no text or symbols)

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Line drawing of a traditional Chinese wooden cabinet with lattice patterns and decorative panels (no text or symbols)

BESOIN D'AIDE? CONTACTEZ-NOUS!

Please read and observe carefully all the assembly instructions before beginning assembly.

Unit should be assembled by two or more people.

DO NOT CLIMB

Please do not let your child climb on the product. If y kids or animals who like to climb, we highly recomme using the wall anchors and brackets/straps that come the package.

Technical diagram showing seven labeled assembly steps of a mechanical or architectural component, with numbered annotations.

A X30 Ø5x35mm

B X30 Ø15x9mm

C X4 Ø12mm

D X6

E X27 Ø6x30mm

F X14 M5x40mm

G X2

H X8

I X70 M4x12mm

J X1 4mm

ASSEMBLY STEPS

Step1

A A A ④ X2

Step2

Technical diagram showing assembly steps of a mechanical component with labeled parts and exploded views

Step3

Technical diagram of a structural frame with labeled components and assembly steps, including tool insertion and component assembly instructions.

Step4

A A A A A E ③ A E A E ③ A A E X3 Ø6x30mm Ø5x35mm A X14

Step5

F F F F F F ③ ③ ④ ⑤ ⑤ ④

Step6

step6 A C X2 ⑦ A C B ⑦ B ⑥ B ⑥ B ⑦ Tighten

Step7 Step8 H X8 I X32 M4x12mm

Step9

Technical diagram of a mechanical assembly with labeled components and a corresponding table showing dimensions and parts.

Step11

Technical diagram of a mechanical assembly with labeled components and exploded views

COMPLETION

Line drawing of a traditional Chinese wooden cabinet with geometric lattice patterns and decorative panels (no text or symbols)

Fabricant : Shanghaimuxinmuyeyouxiangongsi

Adresse : Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai 200000 CN.

Importé en Australie : SIHAO PTY LTD. 1 ROKEVA

STREETEASTWOOD NSW 2122 Australie

Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

UK

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Line drawing of a traditional Chinese wooden cabinet with lattice patterns and decorative panels (no text or symbols)

www.vevor.com/support

Please read and observe carefully all the assembly instructions before beginning assembly.

Unit should be assembled by two or more people.

DO NOT CLIMB

Please do not let your child climb on the product. If y kids or animals who like to climb, we highly recomme using the wall anchors and brackets/straps that come the package.

Technical diagram showing seven labeled assembly steps of a mechanical or architectural component, with numbered annotations.

A X30 Ø5x35mm

B X30 Ø15x9mm

C X4 Ø12mm

D X6

E X27 Ø6x30mm

F X14 M5x40mm

G X2

H X8

I X70 M4x12mm

J X1 4mm

ASSEMBLY STEPS

Step1

A A A ④ X2

Step2

Technical diagram showing assembly steps of a mechanical component with labeled parts and exploded views

Step3

Technical diagram of a structural frame with labeled components and assembly steps, including tool insertion and component assembly instructions.

Step4

A A A A A E ③ A E A E ③ A A E X3 Ø6x30mm Ø5x35mm A X14

Step5

F F F F F F ③ ③ ④ ⑤ ⑤ ④

Step6

step6 A C X2 ⑦ A C B ⑦ B ⑥ B ⑥ B ⑦ Tighten

Step9

Technical diagram of a mechanical assembly with labeled components and a corresponding table showing dimensions and parts.

Step11

Technical diagram of a mechanical assembly with labeled components and exploded views

COMPLETION

Line drawing of a traditional Chinese wooden cabinet with geometric lattice patterns and decorative panels (no text or symbols)

Hersteller: Shanghaimuxinmuyeyouxiangongsi

Adresse: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai 200000 CN.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Line drawing of a traditional Chinese wooden cabinet with lattice patterns and decorative panels (no text or symbols)

Please read and observe carefully all the assembly instructions before beginning assembly.

Unit should be assembled by two or more people.

DO NOT CLIMB

Please do not let your child climb on the product. If y kids or animals who like to climb, we highly recomme using the wall anchors and brackets/straps that come the package.

Technical diagram showing seven labeled assembly steps of a mechanical or architectural component, with numbered annotations.

A X30 Ø5x35mm

B X30 Ø15x9mm

C X4 Ø12mm

D X6

E X27 Ø6x30mm

F X14 M5x40mm

G X2

H X8

I X70 M4x12mm

J X1 4mm

ASSEMBLY STEPS

Step 1

A A A ④ X2

Step2

Technical diagram showing assembly steps of a mechanical component with labeled parts and exploded views

Step3

Technical diagram of a structural frame with labeled components and assembly steps, including tool insertion and component assembly instructions.

Step4

A A A A A E ③ A E A E ③ A A E X3 Ø6x30mm Ø5x35mm A X14

Step5

③ ③ ④ ⑤ ④

Step6 A C X2 7 A C B 6 B 6 B 7 Tights

Step7 Step8 H X8 I X32 M4x12mm

Step9

Technical diagram of a mechanical assembly with labeled components and a corresponding table showing dimensions and parts.

Step11

Technical diagram of a mechanical assembly with labeled components and exploded view, including parts G and numbered parts 1 and 2.

COMPLETION

Architectural elevation drawing of a traditional Chinese-style building with lattice facade and window grout (no text or symbols)

Importato in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Importato negli USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Line drawing of a traditional Chinese wooden cabinet with lattice patterns and decorative panels (no text or symbols)

Please read and observe carefully all the assembly instructions before beginning assembly.

Unit should be assembled by two or more people.

DO NOT CLIMB

Please do not let your child climb on the product. If y kids or animals who like to climb, we highly recomme using the wall anchors and brackets/straps that come the package.

PRECAUCIONES DE MONTAJE

Technical diagram showing seven labeled assembly steps of a mechanical or architectural component, with numbered annotations.

A X30 Ø5x35mm

B X30 Ø15x9mm

C X4 Ø12mm

D X6

E X27 Ø6x30mm

F X14 M5x40mm

G X2

H X8

I X70 M4x12mm

J X1 4mm

ASSEMBLY STEPS

©

Step3

Technical diagram of a structural frame with labeled components and assembly steps, including tool insertion and component assembly instructions.

Step4

A A A A A E ③ A E A E ③ A A E X3 Ø6x30mm Ø5x35mm A X14

Step5

F F F F F F ③ ③ ④ ⑤ ⑤ ④

Step6 A C X2 ⑦ A C B ⑥ B ⑥ B ⑦ Tightsøn

Step7 Step8 H X8 I X32 M4x12mm

Step9

Technical diagram of a mechanical assembly with labeled components and a corresponding table showing dimensions and parts.

Step11

Technical diagram of a mechanical assembly with labeled components and exploded views

COMPLETION

Line drawing of a traditional Chinese wooden cabinet with geometric lattice patterns and decorative panels (no text or symbols)

Fabricante: Shanghaimuxinmuyeyouxiangongsi

Dirección: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Importado a AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Importado a EE. UU.: Sanven Technology Ltd. Suite 250, 9166 Anah Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Line drawing of a traditional Chinese wooden cabinet with lattice patterns and decorative panels (no text or symbols)

POTRZEBUJESZ POMOCY? SKONTAKTUJ SIE Z NAMI!

Please read and observe carefully all the assembly instructions before beginning assembly.

Unit should be assembled by two or more people.

DO NOT CLIMB

Please do not let your child climb on the product. If y kids or animals who like to climb, we highly recomme using the wall anchors and brackets/straps that come the package.

ŚRODKI OSTROŻNOŚCI PODCZAS MONTAŻU

Technical diagram showing seven labeled assembly steps of a mechanical or architectural component, with numbered annotations.

A X30 Ø5x35mm

B X30 Ø15x9mm

C X4 Ø12mm

D X6

E X27 Ø6x30mm

F X14 M5x40mm

G X2

H X8

I X70 M4x12mm

J X1 4mm

ASSEMBLY STEPS

Step 1

A A A ④ X2

Step2

Technical diagram showing assembly steps of a mechanical component with labeled parts and exploded views

Step3

Technical diagram of a structural frame with labeled components and assembly steps, including tool insertion and component assembly instructions.

Step4

A A A A A E ③ A E A E ③ A A E X3 Ø6x30mm Ø5x35mm A X14

Step5

③ ③ ④ ⑤ ④

Step6

step6 A C X2 ⑦ A C B ⑦ B ⑥ B ⑥ B ⑦ Tighten

Step9

Technical diagram of a mechanical assembly with labeled components and a corresponding table showing dimensions and parts.

Step11

Technical diagram of a mechanical assembly with labeled components and exploded views

COMPLETION

Line drawing of a traditional Chinese wooden cabinet with geometric lattice patterns and decorative panels (no text or symbols)

Producent: Shanghaimuxinmuyeyouxiangongsi

Adres: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, szanghaj 200000 CN.

Importowane do AUS: SIHAO PTY LTD. 1 ROKEVA

STREETEASTWOOD NSW 2122 Australia

Importowane do USA: Sanven Technology Ltd. Suite 250, 9166 Anar Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technisch Ondersteuning en E-garantiecertificaat www.vevor.com/support

ROTAN SALONTAFEL

GEBRUIKSAANWIJZING

MODELNUMMER: HYCT-MZBT-008

Line drawing of a traditional Chinese wooden cabinet with lattice patterns and decorative panels (no text or symbols)

HULP NODIG? NEEM CONTACT MET ONS OP!

Please read and observe carefully all the assembly instructions before beginning assembly.

Unit should be assembled by two or more people.

DO NOT CLIMB

Please do not let your child climb on the product. If y kids or animals who like to climb, we highly recomme using the wall anchors and brackets/straps that come the package.

MONTAGEVOORZORGSMAATREGELEN

Technical diagram showing seven labeled assembly steps of a mechanical or architectural component, with numbered annotations.

A X30 Ø5x35mm

B X30 Ø15x9mm

C X4 Ø12mm

D X6

E X27 Ø6x30mm

F X14 M5x40mm

G X2

H X8

I X70 M4x12mm

J X1 4mm

ASSEMBLY STEPS

Step1

A A A ④ X2

Step2

Technical diagram showing assembly steps of a mechanical component with labeled parts and exploded views

Step3

Technical diagram of a structural frame with labeled components and assembly steps, including tool insertion and component assembly instructions.

Step4

A A A A A E ③ A E A E ③ A A E X3 Ø6x30mm Ø5x35mm A X14

Step5

F F F F F F ③ ③ ④ ⑤ ⑤ ④

Step6 A C X2 ⑦ A C B ⑥ B ⑥ B ⑦ Tightsøn

Step9

Technical diagram of a mechanical assembly with labeled components and a corresponding table showing dimensions and parts.

Step11

Technical diagram of a mechanical assembly with labeled components and exploded views

COMPLETION

Line drawing of a traditional Chinese wooden cabinet with geometric lattice patterns and decorative panels (no text or symbols)

Fabrikant: Shanghaimuxinmuyeyouxiangongsi

Adres: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Line drawing of a traditional Chinese wooden cabinet with lattice patterns and decorative panels (no text or symbols)

BEHÖVER HJÄLP? KONTAKTA OSS!

Please read and observe carefully all the assembly instructions before beginning assembly.

Unit should be assembled by two or more people.

DO NOT CLIMB

Please do not let your child climb on the product. If y kids or animals who like to climb, we highly recommend using the wall anchors and brackets/straps that come the package.

FÖRSIKTIGHETSÅTGÄRDER FÖR MONTERING

Technical diagram showing seven labeled assembly steps of a mechanical or architectural component, with numbered annotations.

A X30 Ø5x35mm

B X30 Ø15x9mm

C X4 Ø12mm

D X6

E X27 Ø6x30mm

F X14 M5x40mm

G X2

H X8

I X70 M4x12mm

J X1 4mm

ASSEMBLY STEPS

Step 1

A A A ④ X2

Step2

Technical diagram showing assembly steps of a mechanical component with labeled parts and exploded views

Step3

Technical diagram of a structural frame with labeled components and assembly steps, including tool insertion and component assembly instructions.

Step4

A A A A A E ③ A E A E ③ A A E X3 Ø6x30mm Ø5x35mm A X14

Step5

③ ③ ④ ⑤ ④

Step6 A C X2 ⑦ A C B ⑥ B ⑥ B ⑦ Tighten

Step7 Step8 H X8 I X32 M4x12mm

Step9

Technical diagram of a mechanical assembly with labeled components and a corresponding table showing dimensions and parts.

Step11

Technical diagram of a mechanical assembly with labeled components and exploded views

COMPLETION

Line drawing of a traditional Chinese wooden cabinet with geometric lattice patterns and decorative panels (no text or symbols)

Tillverkare: Shanghaimuxinmuyeyouxiangongsi

Adress: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Importerad till AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOC NSW 2122 Australien

Importerad till USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX