LX-P9372 - Kitchen accessory Vevor - Free user manual and instructions

Find the device manual for free LX-P9372 Vevor in PDF.

Vevor LX-P9372 - Kitchen accessory
📄 64 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Vevor LX-P9372 - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Spice Rack
Brand Vevor
Model LX-P9372
Maximum Load Capacity 10 kg
Material Steel (estimated)
Installation On horizontal surface or wall mounting with screws
Dimensions (estimated) Approximately 40 x 15 x 10 cm
Weight (estimated) Approximately 2 kg
Maintenance and Cleaning Clean with a cloth, warm water and mild detergent. Do not use abrasive cleaners, steel wool or brushes. Do not put in dishwasher.
Safety Do not use on or near a flame. Keep out of reach of children. Place on a stable surface or fix to wall. Check the fixation and screws regularly.
Usage For domestic use only, in a kitchen
Spare Parts and Repairability Spare parts available (technical support via www.vevor.com/support)
General Information Manufactured by Shanghaimuxinmuyeyouxiangongsi, China. Imported to Australia, United States and United Kingdom.

Frequently Asked Questions - LX-P9372 Vevor

What is the maximum capacity of the Vevor LX-P9372 spice rack?
The maximum load capacity is 10 kg. Be sure to distribute heavy items evenly.
How to install the Vevor LX-P9372 spice rack?
You can place it on a stable horizontal surface or fix it to the wall with screws. Leave about 100 mm of space in front and above for easy use.
Can the spice rack be cleaned in the dishwasher?
No, the product must not be put in the dishwasher. Clean it with a damp cloth, warm water and mild detergent.
What cleaning products to use for the spice rack?
Use a cloth, warm water and mild detergent. Avoid abrasive cleaners, steel wool and brushes that could scratch the surface.
Can the spice rack be used outdoors?
No, it is designed for indoor domestic use, in a well-ventilated kitchen away from weather.
Are there important safety precautions?
Yes: do not place near a flame, keep out of reach of children, check the fixation regularly, and do not use as a drying rack. Do not sit or climb on it.
What to do if the product emits an odor or smoke during first use?
This is normal for new appliances. Make sure the plates are clean and wipe off excess oil. The smoke or odor will disappear quickly.
How to get spare parts or technical support?
Contact technical support via www.vevor.com/support for help or to order spare parts.
Can the product be mounted on the wall easily?
Yes, brackets are provided. It is recommended to use an electric screwdriver for easier wall installation.
What are the approximate dimensions of the spice rack?
Exact dimensions are not specified, but the product is designed to hold standard spices; expect approximately 40 x 15 x 10 cm.

User questions about LX-P9372 Vevor

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

Your email remains private: it is only used to notify you if someone answers your question.

No questions yet. Be the first to ask one.

Download the instructions for your Kitchen accessory in PDF format for free! Find your manual LX-P9372 - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LX-P9372 by Vevor.

USER MANUAL LX-P9372 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

SPICE RACK

MODEL: LX-P9372

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.

MODEL: LX-P9372

Technical line drawing of a multi-tiered rack-mounted container or storage unit (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.

Vevor LX-P9372 - NEED HELP? CONTACT US! - 1Warning-To reduce the risk of injury, user must read instructions manual carefully.
WARNING!Please use different installation accessories according different installation positions.

IMPORTANT SAFEGUARDS

Thank you for using this product. In order to make sure that you can operate the machine correctly, read this instruction carefully before operation and keep it properly for future reference. Please be sure to read the precautions and safe rules on this page to ensure your safe use. This manual will outline safety warnings and precautions, operating, maintenance, and cleaning. The warnings and instructions reviewed in this manual cannot cover all possible conditions and situations that may occur. Caution and common sense are not built into this product, since we believe that the users will comply with these codes.

Please read ALL the instructions before using your machine.

  1. DO NOT let children, minors, or pets get close to or touch the product.
  2. Using any accessories or attachments that are not provided or recommended by the manufacturer may cause injury.
  3. Do not attempt to modify the product in any way.
  4. If the product is not to be used for a long period of time, clean it and store it in a dry and safe place.
  5. KEEP IT OUT OF CHILDREN'S REACH.
  6. Avoid using it in the presence of flammable liquids, gases, dust or other explosive situations.
  7. Children shall not play with the machine alone. Children shall only make cleaning and user maintenance with supervision.
  8. Make sure that the product is always placed on a firm, level support.
  9. The machine should be located in an open area with good ventilation, away from trees and fences.
  10. While every effort has been made in the manufacture of your machine to

remove any sharp edge, you should handle all components with care in order to avoid accidental injury.

  1. Keep a fire extinguisher within a safe and accessible distance, and ensure that those operating the machine are trained to use it.
  2. Keep away from flammable materials and fluids such as petroleum, alcohol, diesel fuel, kerosene, and charcoal lighter fluid, or vehicles while in use.
  3. DO NOT CLEAN IT WITH ANY ABRASIVE MATERIAL.
  4. This machine is intended for domestic cooking only. It is not designed for commercial or industrial purposes.
  5. Perishable food, plastic items, and aerosols may be affected by heat and should not be stored above or below the machine unit.
  6. Do not place clothes above the machine and avoid using it as a clothes
  7. The maximum load capacity of the product is 10Kg, and heavy objects should be evenly placed.

WARNING! Cannot stand or sit on the product.

WARNING! Remove all packaging materials and keep them for future use. Packaging materials are not a toy.

WARNING! Don't let children play with the packaging materials. If they swallow the packaging materials, they will suffocate!

WARNING! Keep children and pets away. Children must not operate or play near this machine.

WARNING! Failure to follow instructions could result in death, serious injury, and property loss.

WARNING: This appliance is not intended for use by young or infirm persons unless supervised by a responsible person to ensure that they use the appliance safely. Young children should be supervised to ensure that they do not play with the product. Pets should stay away from the product.

ATTENTION! The product cannot be placed in the dishwasher for cleaning.

INSTALLATION STEPS

Before using the appliance for the first time, peel off any promotional material and packaging materials, and check that the cooking plates are clean and free of debris. If necessary, wipe them over with a damp cloth. Spread over with an absorbent kitchen towel and wipe off any excess oil. When your product is heated for the first time, it may emit slight smoke or odor, which is normal for many products and does not affect the safety of your product.

Part List

A Left/Right bracketsTechnical line drawing of a rectangular mechanical part with three notches and a base, labeled 'x 2' (no text or symbols on the object itself)

B Layer frameTechnical line drawing of a rectangular grid structure with wavy internal lines, labeled 'x 3' at bottom (no text or symbols on the diagram itself)

C Left B/Right B bracketsTechnical line drawing of a mechanical assembly with two cylindrical components and a rectangular housing (no text or symbols)

D Top shelf

Isometric line drawing of a multi-layered grid structure (no text or symbols)

E ScrewdriverSimple line drawing of a bent pipe or tube with no text or symbols

F Adjusting screw x 4Vevor LX-P9372 - Part List - 6

G Plastic expansion screwVevor LX-P9372 - Part List - 7

H Cross screwVevor LX-P9372 - Part List - 8

K Cross head screwVevor LX-P9372 - Part List - 9

WARNING! The product cannot be placed near or on a fire source, otherwise it will deform and burn!

ATTENTION! Ensure that the product is placed on a horizontal and sturdy platform, or secured to the wall with screws.

ATTENTION! Before each use, the handle must be checked for looseness and the handle and screws must be kept tight.

NOTE: The quantity of parts shown in the manual is the actual usage; unused parts are spare parts.

STEP 1K A B Cushion (Already installed in advance) A: Left /Right brackets x2 B: Layer frame x2 K: Cross head screw x8

STEP 2B: Layer frame x1 C: Left B /Right B brackets x2 D: Top shelf x1 K: Cross head screw x8

STEP 3

Technical line drawing of two multi-tiered mechanical or electrical enclosure units with no visible text or symbols

STEP 4 Hanging hole size: 390x160mm390 160

ATTENTION! Approximately 100mm of space needs to be reserved at the front and upper ends of the product for easy use.

TIPS: If you need to install the product on the wall, it is recommended an electric screwdriver.

Usage Scenario 1 : Place it on a flat surface Attention: The product needs a horizontal and stable surface, and cannot be placed on the edge.Technical line drawing of a multi-tiered rack or storage unit (no text or symbols visible)

Flat Surface

Usage Scenario 2 : Hanging on the wall 1. When the wall is made of wooden boards, only use Hx4. 2. When the wall is made of cement, use Hx4 and Gx4.Vevor LX-P9372 - Part List - 15

Usage Scenario 3: This product can be split into three separate uses.Technical line drawing of three mechanical components with grid-like supports and mounting brackets (no text or symbols)

CLEANING AND STORAGE

  1. Please remove the items placed on top before cleaning.
  2. Product can be cleaned using a dishcloth, warm water and a commercial detergent. Avoid using abrasive cleaners, and wire wool and brushes as these may scratch the surface.
  3. Before storage, always make sure the product is cool and dry.
  4. Store the appliance in a dry and clean area.

ATTENTION! The product cannot be placed in the dishwasher for cleaning.

Manufacturer: Shanghai Muxin Wood Industry Co., Ltd.

Address: Room 1602A-1609, No. 11, Lane 803, Shuangcheng Road, Baoshan District, Shanghai 200000, CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET, EASTWOOD NSW 2122, Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UKREP

YH CONSULTING LIMITED.

C/O YH Consulting Limited, Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

ECREP

E-CrossStu GmbH

Mainzer Landstr. 69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

explosive situations.

B Layer frameTechnical line drawing of a rectangular grid structure with curved internal lines, labeled 'x 3' at bottom (no text or symbols on the diagram itself)

C Left B /Right B bracketsTechnical line drawing of a mechanical housing or enclosure with two internal components and mounting holes (no text or symbols)

D Top shelf

Isometric line drawing of a multi-layered grid structure (no text or symbols)

E screwdriverSimple line drawing of a bent pipe or rod with a looped end, labeled 'x 1' at the bottom (no other text or symbols)

F Adjusting screw x 4Vevor LX-P9372 - NEED HELP? CONTACT US! - 5

G Plastic expansion screwVevor LX-P9372 - NEED HELP? CONTACT US! - 6

H Cross screwVevor LX-P9372 - NEED HELP? CONTACT US! - 7

K Cross head screwVevor LX-P9372 - NEED HELP? CONTACT US! - 8

Usage Scenario 1: Place it on a flat surface. Attention: The product needs a horizontal and stable surface, and cannot be placed on the edge.Technical line drawing of a multi-tiered metal rack or storage unit (no text or symbols)

Flat Surface

Usage Scenario 2: Hanging on the wall 1. When the wall is made of wooden boards, only use Hx4. 2. When the wall is made of cement, use Hx4 and Gx4.G H Wall

Usage Scenario 3: This product can be split into three separate uses.Technical line drawing of three mechanical assembly components with no visible text or symbols

C/O YH Consulting Limited Bureau 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

REPRÉSENTANT CE

E-CrossStu GmbH

Mainzer Landstr.69,

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

B Layer frameTechnical line drawing of a rectangular grid structure with curved internal lines, labeled 'x 3' at bottom (no text or symbols on the diagram itself)

C Left B /Right B bracketsTechnical line drawing of a mechanical housing or enclosure with two internal components and mounting holes (no text or symbols)

D Top shelf

Isometric line drawing of a multi-layered grid structure (no text or symbols)

E screwdriverSimple line drawing of a bent pipe or rod with a looped end, labeled 'x 1' at the bottom (no other text or symbols)

F Adjusting screwVevor LX-P9372 - TOUGH TOOLS, HALF PRICE - 5

G Plastic expansion screwVevor LX-P9372 - TOUGH TOOLS, HALF PRICE - 6

H Cross screwVevor LX-P9372 - TOUGH TOOLS, HALF PRICE - 7

K Cross head screwK A B Cushion (Already installed in advance) A: Left /Right brackets x2 B: Layer frame x2 K: Cross head screw x8

STEP 2B: Layer frame x1 C: Left B /Right B brackets x2 D: Top shelf x1 K: Cross head screw x8

STEP 3

Technical line drawing of two multi-tiered metal shelving units with labeled components (no text or symbols present)

STEP 4 Hanging hole size: 390x160mm390 160

Usage Scenario 1 : Place it on a flat surface Attention: The product needs a horizontal and stable surface, and cannot be placed on the edge.Technical line drawing of a multi-tiered metal rack or storage unit (no text or symbols)

Flat Surface

Usage Scenario 2 : Hanging on the wall 1. When the wall is made of wooden boards, only use Hx4. 2. When the wall is made of cement, use Hx4 and Gx4.G H Wall

Usage Scenario 3: This product can be split into three separate uses.Technical line drawing of three mechanical components with no visible text or symbols

C/O YH Consulting Limited Büro 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

EG-REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

x 3

C Left B /Right B brackets ×2Vevor LX-P9372 - TOUGH TOOLS, HALF PRICE - 1

D Top shelfIsometric line drawing of a coiled spring or heat sink component (no text or symbols)

x 1

E screwdriver x 1Vevor LX-P9372 - TOUGH TOOLS, HALF PRICE - 3

F Adjusting screw x 4Vevor LX-P9372 - TOUGH TOOLS, HALF PRICE - 4

G Plastic expansion screw x 4Vevor LX-P9372 - TOUGH TOOLS, HALF PRICE - 5

H Cross screw x 4Vevor LX-P9372 - TOUGH TOOLS, HALF PRICE - 6

K Cross head screw x 16K A B Cushion (Already installed in advance) A: Left /Right brackets x2 B: Layer frame x2 K: Cross head screw x8

STEP 2B: Layer frame x1 C: Left B /Right B brackets x2 D: Top shelf x1 K: Cross head screw x8

STEP 3

Technical line drawing of two multi-tiered metal shelving units with labeled components (no text or symbols present)

STEP 4 Hanging hole size: 390x160mm390 160

Usage Scenario 1 : Place it on a flat surface Attention: The product needs a horizontal and stable surface, and cannot be placed on the edge.Technical line drawing of a multi-tiered metal rack or storage unit (no text or symbols)

Flat Surface

Usage Scenario 2 : Hanging on the wall 1. When the wall is made of wooden boards, only use Hx4. 2. When the wall is made of cement, use Hx4 and Gx4.G H Wall

Usage Scenario 3 : This product can be split into three separate uses.Technical line drawing of three mechanical assembly components with no visible text or symbols.

CLEANING AND STORAGE

Imported in Australia: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122Australia

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

REP.CE

E-CrossStu GmbH

Mainzer Landstr.69,

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP?

B Layer framePure technical line drawing of a rectangular grid structure with no text or symbols.

C Left B / Right B bracketsTechnical line drawing of a mechanical housing or enclosure with two internal components and mounting holes (no text or symbols).

D Top shelf

Isometric line drawing of a multi-layered electrical connector (no text or symbols).

E screwdriverSimple line drawing of a bent pipe or rod with a looped end, labeled 'x 1' (no text or symbols on the object itself).

F Adjusting screw x 4Vevor LX-P9372 - NEED HELP? - 5

G Plastic expansion screwVevor LX-P9372 - NEED HELP? - 6

H Cross screwVevor LX-P9372 - NEED HELP? - 7

K Cross head screwK A B Cushion (Already installed in advance) A: Left/Right brackets x2 B: Layer frame x2 K: Cross head screw x8

STEP 2B: Layer frame x1 C: Left B/Right B brackets x2 D: Top shelf x1 K: Cross head screw x8

STEP 3

Technical line drawing of two multi-tiered metal shelving units with labeled components (no text or symbols present).

STEP 4 Hanging hole size: 390x160mm390 160

Usage Scenario 1: Place it on a flat surface. Note: The product needs a horizontal and stable surface, and cannot be placed on the edge.Technical line drawing of a multi-tiered metal rack or storage unit (no text or symbols).

Flat Surface

Usage Scenario 2: Hanging on the wall. 1. When the wall is made of wooden boards, only use Hx4. 2. When the wall is made of cement, use Hx4 and Gx4.G H Wall

Usage Scenario 3: This product can be split into three separate uses.Technical line drawing of three mechanical components with no visible text or symbols.

CLEANING AND STORAGE

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

EC REPRESENTATIVE

E-CrossStu GmbH

Mainzer Landstr.69,

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

B Layer frameTechnical line drawing of a rectangular grid structure with curved internal lines, labeled 'x 3' at bottom (no text or symbols on the diagram itself).

C Left B /Right B bracketsTechnical line drawing of a mechanical housing or enclosure with two internal components and mounting holes (no text or symbols).

D Top shelf

Isometric line drawing of a multi-layered grid structure (no text or symbols).

E screwdriverSimple line drawing of a bent pipe or rod with a looped end, labeled 'x 1' at the bottom (no other text or symbols).

F Adjusting screw x 4Vevor LX-P9372 - TOUGH TOOLS, HALF PRICE - 5

G Plastic expansion screwVevor LX-P9372 - TOUGH TOOLS, HALF PRICE - 6

H Cross screwVevor LX-P9372 - TOUGH TOOLS, HALF PRICE - 7

K Cross head screwK A B Cushion (already installed in advance) A: Left/Right brackets x2 B: Layer frame x2 K: Cross head screw x8

STEP 2B: Layer frame x1 C: Left B/Right B brackets x2 D: Top shelf x1 K: Cross head screw x8

STEP 3

Technical line drawing of two stacked metal rack units with labeled components (no text or symbols present).

STEP 4 Hanging hole size: 390x160mm390 160

Usage Scenario 1 : Place it on a flat surface Attention: The product needs a horizontal and stable surface, and cannot be placed on the edge.Technical line drawing of a multi-tiered metal rack or storage unit (no text or symbols).

Flat Surface

Usage Scenario 2 : Hanging on the wall 1. When the wall is made of wooden boards, only use Hx4. 2. When the wall is made of cement, use Hx4 and Gx4.G H Wall

Usage Scenario 3 : This product can be split into three separate uses.Technical line drawing of three mechanical components with no visible text or symbols.

CLEANING AND STORAGE

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

REPREZENT KE

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical support and e-warranty certificate www.vevor.com/support

SPICE RACK

MODEL: LX-P9372

NEED HELP?

B Layer frameTechnical line drawing of a rectangular grid structure with curved internal lines, labeled 'x 3' at bottom (no text or symbols on the diagram itself)

C Left B /Right B bracketsTechnical line drawing of a mechanical housing or enclosure with two internal components and mounting holes (no text or symbols)

D Top shelf

Isometric line drawing of a multi-layered grid structure (no text or symbols)

E screwdriverSimple line drawing of a bent pipe or rod with a looped end, labeled 'x 1' (no text or symbols on the object itself)

F Adjusting screw x 4Vevor LX-P9372 - NEED HELP? - 5

G Plastic expansion screwVevor LX-P9372 - NEED HELP? - 6

H Cross screwVevor LX-P9372 - NEED HELP? - 7

K Cross head screwK A B Cushion (Already installed in advance) A: Left/Right brackets x2 B: Layer frame x2 K: Cross head screw x8

STEP 2B: Layer frame x1 C: Left B/Right B brackets x2 D: Top shelf x1 K: Cross head screw x8

STEP 3

Technical line drawing of two multi-tiered mechanical or electrical enclosures with no visible text or symbols

STEP 4 Hanging hole size: 390x160mm390 160

Usage Scenario 1 : Place it on a flat surface Attention: The product needs a horizontal and stable surface, and cannot be placed on the edge.Technical line drawing of a multi-tiered metal rack or storage unit (no text or symbols)

Flat Surface

Usage Scenario 2 : Hanging on the wall 1. When the wall is made of wooden boards, only use Hx4. 2. When the wall is made of cement, use Hx4 and Gx4.G H Wall

Usage Scenario 3: This product can be split into three separate uses.Technical line drawing of three mechanical components with no visible text or symbols

REINIGING EN OPSLAG

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

EG REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP?

B Layer frameTechnical line drawing of a rectangular grid structure with curved internal lines, labeled 'x 3' at bottom (no text or symbols on the diagram itself)

C Left B /Right B bracketsTechnical line drawing of a mechanical housing or enclosure with two internal components and mounting holes (no text or symbols).

D Top shelf

Isometric line drawing of a multi-layered grid structure (no text or symbols).

E screwdriverSimple line drawing of a bent pipe or rod with a looped end, labeled 'x 1' at the bottom (no other text or symbols).

F Adjusting screwVevor LX-P9372 - NEED HELP? - 5

G Plastic expansion screwVevor LX-P9372 - NEED HELP? - 6

H Cross screwVevor LX-P9372 - NEED HELP? - 7

K Cross head screwK A B Cushion (already installed in advance) A: Left/right brackets x2 B: Layer frame x2 K: Cross head screw x8

STEP 2K C D B B: Layer frame x1 C: Left B/right B brackets x2 D: Top shelf x1 K: Cross head screw x8

STEP 3

Technical line drawing of two stacked metal rack units with internal components and mounting holes (no text or symbols).

STEP 4 Hanging hole size: 390x160mm390 160

Usage Scenario 1 : Place it on a flat surface Attention: The product needs a horizontal and stable surface, and cannot be placed on the edge.Technical line drawing of a multi-tiered metal rack or storage unit (no text or symbols).

Flat Surface

Usage Scenario 2 : Hanging on the wall 1. When the wall is made of wooden boards, only use Hx4. 2. When the wall is made of cement, use Hx4 and Gx4.G H Wall

Usage Scenario 3 : This product can be split into three separate uses.Technical line drawing of three mechanical components with no visible text or symbols.

CLEANING AND STORAGE

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

ECREP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Vevor

Model : LX-P9372

Category : Kitchen accessory