LPK1289-4 - Kitchen accessory Vevor - Free user manual and instructions

Product Type	Gas Stove Cover
Brand	Vevor
Model	LPK1289-4
Material	100% Natural Wood
Main Use	Cover gas stove; can serve as light chopping board
Installation	Screw 2 handles onto the board using a hex key; stick non-slip pads under the board
Care and Cleaning	Clean by hand with a solution of water and soap or vinegar and water; do not use dishwasher; apply solvent-free food oil if surface becomes dull
Safety	Do not expose to high temperatures or open flame; do not use as cutting board for forceful chopping (risk of cracking)
Repairability	Light sanding possible to smooth cuts; reapply oil finish after sanding
Package Contents	Wooden board, 2 handles, screws, non-slip pads, hex key
Compatible Models	LPK1289-3, LPK1289-4, LPK1289-5
Warranty	Technical support and electronic warranty certificate at www.vevor.com/support
Manufacturer	Shanghaimuxinmuyeyouxiangongsi, Shanghai, China
Importer (Australia)	SIHAO PTY LTD, 1 ROKEVA STREET ESTWOOD NSW 2122
Importer (USA)	Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

Frequently Asked Questions - LPK1289-4 Vevor

How to install the gas stove cover?

Screw the 2 handles onto the wooden board by inserting the screws into the pre-drilled holes using the provided hex key. Then stick the non-slip pads under the board to ensure balance. Tighten the screws firmly for sturdy handles.

Can I use this cover as a cutting board?

Yes, but only for slicing or gently cutting food. Avoid forceful chopping as it could crack or damage the board. Always use a light touch to preserve its integrity.

How to maintain the wood surface?

Clean by hand with a solution of water and soap or vinegar and water. Do not put in dishwasher. If the surface becomes dull, apply solvent-free food oil to revive the finish. In case of cuts, sand lightly then reapply oil.

Is the cover heat resistant?

No, it is made of 100% natural wood and is not designed to withstand heat. Do not expose it to high temperatures or open flame, as this could cause a fire.

What are the dimensions of the product?

Exact dimensions are not specified in the manual. The LPK1289-4 model is part of a range of covers of different sizes. Check the product sheet on the seller's website for precise dimensions.

Is the cover delivered with accessories?

Yes, the package contains the wooden board, 2 handles, fixing screws, non-slip pads, and a hex key for installation.

Can I use this cover on an electric or induction stove?

The manual specifically mentions use on a gas stove. For other types of stoves, check compatibility with the manufacturer. In general, wood should not be exposed to direct heat.

How to get technical support or make a claim?

Visit www.vevor.com/support for technical support and the electronic warranty certificate. You will find contact details and procedures there.

Is the wood treated?

The manual indicates that the wood is 100% natural. It receives a natural oil finish that protects it. No chemical treatment is mentioned.

Can I paint or varnish the cover?

It is not recommended to apply non-recommended products. If the surface dulls, use only solvent-free food oil. For any other modifications, contact the manufacturer.

USER MANUAL LPK1289-4 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

GAS STOVE COVER

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to co all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually Saving Half in comparison with the top major brands.

3D rendering of a rectangular electronic device with two side supports and a flat top surface (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of o user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you ag there are any technology or software updates on our product.

Warning-To reduce the risk of injury, user must read instructions manual carefully.

INSTALLATION STEPS

Please read all of the instructions before using it. The information will you achieve the best possible results.

Install 2 handles to Wooden board by inserting screws into the drilled (use hex key) as picture.

3D rendering of a flat rectangular tray with two side supports and a central horizontal bar (no text or symbols)

Stick anti-slips under wooden board to ensure balance.

NOTE: Tighten the screws for sturdy handles

Technical diagram of a structural support frame with mounting holes and vertical supports (no text or symbols)

CARE & MAINTENANCE GUIDE

USING YOUR GAS STOVE COVER SAFELY

Do not expose your gas stove cover to high temperatures or place if an open flame. Crafted from 100% natural wood, our boards are not designed to withstand heat, which could lead to a fire hazard if not h properly.

CARING FOR YOUR GAS STOVE COVER

When utilized as decor, your gas stove cover demands very little maintenance, its inherent resistance to water and sunlight means that occasional cleaning with a cloth is sufficient.

Should the board's surface start to look dull, revitalize it with a food solvent free oil to refresh the finish.

If you're using the board for food prep, treat it with the same care wooden cutting board, Avoid the dishwasher; clean it by hand using a solution of soap and water, or vinegar and water.

The board's natural oil finish will protect it over time, but be aware of frequent chopping can diminish the integrity of the surface.

The board can serve as a cutting board; however, it should only be gently slicing or dicing food, Chopping forcefully can risk cracking or damaging the board. Always use a light touch to maintain both the i and appearance of your board. if the surface becomes marred by cut gently sanding can smooth out these imperfections, After sanding.reapp the finish as recommended to restore its shine.

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consultin Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4A>

EC

REP

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

3D rendering of a rectangular tray with two side supports and a metal clip attached (no text or symbols)

BESOIN D'AIDE ? CONTACTEZ-NOUS !

3D rendering of a rectangular tray with two side supports and a central horizontal bar (no text or symbols)

Technical diagram of a structural support frame with mounting holes and supporting beams (no text or symbols)

GUIDE D'ENTRETIEN ET DE MAINTENANCE

UTILISER VOTRE COUVERTURE DE POÊLE À GAZ EN TOUTE SÉCURITÉ

YH CONSULTING LIMITED. C/O YH Consulting Limited Bureau 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX.

REPRÉSENTANT CE

E-CrossStu GmbH

Mainzer Landstr.69,

3D rendering of a rectangular tray with two side supports and a metal clip attached (no text or symbols)

BRAUCHEN SIE HILFE? KONTAKTIEREN SIE UNS!

3D rendering of a rectangular tray with two side supports and a central horizontal bar (no text or symbols)

Technical diagram of a structural support frame with mounting holes and supporting beams (no text or symbols)

YH CONSULTING LIMITED. C/O YH Consulting Limited Büro 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

elettronica www.vevor.com/support

3D rendering of a rectangular tray with two side supports and a metal clip attached (no text or symbols)

3D rendering of a rectangular tray with two side supports and a central horizontal bar (no text or symbols)

Technical diagram of a structural support frame with mounting holes and supporting beams (no text or symbols)

Importato in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

YH CONSULTING LIMITED C/O YH Consulting Limited Ufficio 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX.

REP.CE

E-CrossStu GmbH

Mainzer Landstr.69,

3D rendering of a rectangular tray with two side supports and a metal clip attached (no text or symbols)

¿NECESITAS AYUDA?

3D rendering of a rectangular tray with two side supports and a central horizontal bar (no text or symbols)

Technical diagram of a structural support frame with mounting holes and supporting beams (no text or symbols)

YH CONSULTING LIMITED C/O YH Consulting Limited Oficina 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX.

E-CrossStu GmbH

Mainzer Landstr.69,

3D rendering of a rectangular tray with two side supports and a metal clip attached (no text or symbols)

3D rendering of a rectangular tray with two side supports and a central rod (no text or symbols)

Technical diagram of a structural support frame with mounting holes and supporting beams (no text or symbols)

PRZEWODNIK PIELEGNACJI I KONSERWACJI

BEZPIECZNE KORZYSTANIE Z POKRYWY PIECA GAZOWEGO

YH CONSULTING LIMITED. C/O YH Consulting Limited Biuro 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

REPREZENT KE

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt nad Menem.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technische ondersteuning en e-garantiecertificaat www.vevor.com/support

GASKACHEL DEKSEL

MODEL:LPK1289-3, LPK1289-4, LPK1289-5

3D rendering of a rectangular tray with two side supports and a metal clip attached (no text or symbols)

HULP NODIG?

3D rendering of a rectangular tray with two side supports and a central horizontal bar (no text or symbols)

Technical diagram of a structural support frame with mounting holes and supporting beams (no text or symbols)

VERZORGINGS- EN ONDERHOUDSHANDLEIDING

YH CONSULTING LIMITED C/O YH Consulting Limited Kantoor 147, Centurion House, London Road, Staines- upon-Thames, Surrey, TW18 4AX.

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

garantiecertificaat www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

GASSPISLOCK

MODELL:LPK1289-3, LPK1289-4, LPK1289-5

3D rendering of a rectangular tray with two side supports and a metal clip attached (no text or symbols)

BEHÖVER HJÄLP?

3D rendering of a rectangular tray with two side supports and a central horizontal bar (no text or symbols)

Technical diagram of a structural support frame with mounting holes and vertical supports (no text or symbols)

SKÖTSEL & UNDERHÅLLSGUIDE

YH CONSULTING LIMITED C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX.

EC

REP

www.vevor.com/support