KLEC-02 - Wardrobe Vevor - Free user manual and instructions

USER MANUAL KLEC-02 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

RECORD PLAYER CABINET USER MANUAL

MODEL NO.: KLEC-02

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to co all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually Saving Half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

Record Player Cabinet

MODEL NO.: KLEC-02

Line drawing of a modern open-plan cabinet with four legs and one shelf (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of o user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you ag there are any technology or software updates on our product.

WARNING:

Please read this manual carefully before using the product. Failure do so may result in serious injury.

ASSEMBLY PRECAUTIONS

1. Assemble only according to these instructions. Improper assembly c create hazards.

2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.

3. Keep the assembly area clean and well-lit.

4. Keep bystanders out of the area during assembly.

5. Do not assemble when tired or when under the influence of alcohol drugs or medication.

6. The product capabilities apply to properly and completely assembled products only.

7. Assemble on a flat, level, hard and smooth surface capable of sa supporting the Record Player Cabinet.

8. For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unwrap separate all parts in a clean work area.

SAVE THESE INSTRUCTIONS

USE PRECAUTIONS

TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:

1. This product is not a toy Do not allow children to play with or r item.
2. Do not exceed weight capacities, before moving.
3. Use only on a flat, hard and smooth surface capable of safely supporting a fully loaded Record Player Cabinet.
4. Use as intended only.

Inspect before every use; do not use if parts are loose or damaged.

TECHNICAL SPECIFICATIONS

Model	KLEC-02
Product Dimensions (LxWxH)(mm)	803*396*678
Net Weight(kg)	About 16.1

*Products such as specifications, appearance, and design are subject to modification without prior notice.

PACKAGE CONTENTS

Technical diagram showing 10 labeled components of a device or panel assembly, with numbered annotations for each part.

A	X12	B	X12	C	X12	D	X20
∅6×40mm		∅15×9.5		∅8×40		∅3.5×14mm
E	X4	F	X4	G	X8	H	X4
285mm				∅5×40mm		∅5
I	X6	J	X1	K	X20	L	X4
M3×14mm				∅20		∅15
	X1

1

A A A A A A A 1

A	X6

2

Isometric diagram of a rectangular plate with multiple vertical supports labeled 'A', and a circled number 2 on the side (no text or symbols beyond labels)

A	X6

3

Diagram showing two panels with labeled components (② and ⑤) and a central component marked 'C', likely illustrating a mechanical or electrical assembly.

1 2 3 4

C	X2
∅8×40
B	X2
∅15×9.5

∅8×40
B X2
∅15×9.5

4

Technical line drawing of two rectangular panels with labeled components (② and ⑥), no text or symbols present.

Diagram showing four steps of a tool installation or repair procedure, labeled 1 to 4 with numbered components.

B	X2

5

Isometric line drawing of a two-panel cabinet or enclosure structure with labeled components (no text or symbols present)

1 2 3 4

B	X2

∅15×9.5

6

Technical diagram of a modular wall assembly with numbered components and close-up insets showing pin connections.

1 2 3 4

C	X2
∅8×40
B	X6
∅15×9.5

∅8×40
∅15×9.5

7

Technical diagram of a mechanical cabin with numbered components and directional arrows indicating flow or movement.

8 G C G G C ④ C G G ⑦ ① G X8 Ø5×40mm C X8 Ø8×40

G X8 Ø5×40mm C X8 Ø8×40

9

D D D D D F ②

D	X20
∅3.5*14mm
F	X4

10

Technical line drawing of a rectangular device with four labeled ports (E) and a base, showing rotational arrows indicating motion or rotation.

L	X4
∅15
285mm

∅15
285mm

11

Line drawing of a modern side table with numbered compartments and a close-up inset showing the interior door (no text or symbols present)

I	X6

12

Technical line drawing of a wooden cabinet with labeled compartments and a magnified inset showing a component labeled H.

H	X4

13

Line drawing of a simple modular furniture cabinet with a handle and seat, no text or symbols present

14

Line drawing of a modern side table with four legs and one front shelf (no text or symbols)

K	X20

15 WALL J ① J X1 M6×30 Ø4×35mm Ø3.5×14mm 16

COMPLETION

Line drawing of a modern side table with bookshelves and legs (no text or symbols)

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Record Player Cabinet

N° DE MODÈLE : KLEC-02

Line drawing of a modern open-plan cabinet with four legs and one shelf (no text or symbols)

BESOIN D'AIDE ? CONTACTEZ-NOUS!

Technical diagram showing 10 labeled isometric views of a device or panel assembly, with numbered annotations for each component.

A	X12	B	X12	C	X12	D	X20
∅6×40mm		∅15×9.5		∅8×40		∅3.5×14mm
E	X4	F	X4	G	X8	H	X4
285mm				∅5×40mm		∅5
I	X6	J	X1	K	X20	L	X4
M3×14mm				∅20		∅15
	X1

1

Isometric diagram of a rectangular plate with multiple vertical supports and labeled points A, marked with a circle containing number 1 (no text or symbols on the plate itself)

A	X6

2

Isometric diagram of a rectangular plate with multiple vertical supports labeled 'A', no text or symbols present.

A	X6

3

C ② C ⑤

1 2 3 4

C	X2
∅8×40
B	X2
∅15×9.5

∅8×40
B X2
∅15×9.5

4

Technical line drawing of two rectangular panels with labeled components (② and ⑥), no text or symbols present.

1 2 3 4

B	X2

5

Isometric line drawing of a two-panel cabinet or enclosure structure with labeled components (no text or symbols present)

1 2 3 4

B	X2

∅15×9.5

6

Technical diagram of a modular wall assembly with numbered components and close-up insets showing pin connections.

1 2 3 4

C	X2
∅8×40
B	X6
∅15×9.5

∅8×40
∅15×9.5

7

Technical diagram of a mechanical cabin with numbered components and directional arrows indicating flow or movement.

8 G C G G C ④ C G G ⑦ ① G X8 Ø5×40mm C X8 Ø8×40

G X8 Ø5×40mm C X8 Ø8×40

9

D D D D F ②

D	X20
∅3.5*14mm
F	X4

∅3.6×14mm

F

X4

10

Technical line drawing of a rectangular device with four labeled components and rotational arrows indicating rotation (no text or symbols present)

L	X4
∅15
E	X4
285mm

∅15

E

X4

285mm

11

Line drawing of a modern side table with numbered compartments and a close-up inset showing the interior door (no text or symbols present)

I	X6

12

Technical line drawing of a wooden cabinet with labeled compartments and a magnified inset showing a labeled component H.

H	X4

13

Line drawing of a simple modular furniture cabinet with a handle and seat, no text or symbols present

14

Line drawing of a modern side table with four legs and one front shelf (no text or symbols)

K	X20

15 WALL J ① J X1 M6×30 Ø4×35mm Ø3.5×14mm 16

COMPLETION

Line drawing of a modern side table with bookshelves and legs (no text or symbols)

Fabricant : Shanghaimuxinmuyeyouxiangongsi

Adresse : Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai 200 000 CN.

Importé en Australie : SIHAO PTY LTD. 1 RUE ROKEVAASTWOOD NSW 2122 Australie

Lieu, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

Record Player Cabinet

MODELL NR.: KLEC-02

Line drawing of a modern open-plan cabinet with four legs and one shelf (no text or symbols)

Technical diagram showing 10 labeled isometric views of a device or panel assembly, with numbered annotations for each component.

A	X12	B	X12	C	X12	D	X20
∅6×40mm		∅15×9.5		[CXAS]∅8×40		∅3.5×14mm
E	X4	F	X4	G	X8	H	X4
285mm				∅5×40mm		∅5
I	X6	J	X1	K	X20	L	X4
M3×14mm				∅20		∅15
	X1

1

A A A A A A A 1

A	X6

2

Isometric diagram of a rectangular plate with multiple vertical supports labeled 'A', and a circled number 2 on the side (no text or symbols beyond labels)

A	X6

3

Diagram showing two panels with labeled components (② and ⑤) and a central component marked 'C', likely illustrating a mechanical or electrical assembly.

1 2 3 4

C	X2
8 × 40
B	X2
15 × 9.5

∅8×40
B X2
∅15×9.5

4

Technical line drawing of two rectangular panels with labeled components (② and ⑥), no text or symbols present.

Diagram showing four steps of a tool installation or repair procedure, labeled 1 to 4 with numbered components.

B	X2

5

Isometric line drawing of a two-panel cabinet or enclosure structure with labeled components (no text or symbols present)

1 2 3 4

B	X2

∅15×9.5

6

Technical diagram of a modular wall assembly with numbered components and close-up insets showing pin connections.

1 2 3 4

C	X2
∅8×40
B	X6
∅15×9.5

∅8×40
∅15×9.5

7

Technical diagram of a mechanical cabin with numbered components and directional arrows indicating flow or movement.

8 G C G G C ④ C G G ⑦ ① G X8 Ø5×40mm C X8 Ø8×40

G X8 Ø5×40mm C X8 Ø8×40

9

D D D D F ②

D	X20
∅3.5*14mm
F	X4

∅3.6×14mm

F

X4

10

Technical line drawing of a rectangular electronic device with four labeled ports (E) and a base, showing rotational arrows indicating motion or rotation.

L	X4
∅15
E	X4
[T3W]285mm

∅15

E

X4

285mm

11

Line drawing of a modern side table with numbered compartments and a close-up inset showing the interior door (no text or symbols present)

I	X6

12

Technical line drawing of a wooden cabinet with labeled compartments and a magnified inset showing a labeled component H.

H	X4

13

Line drawing of a simple modular furniture cabinet with a handle and seat, no text or symbols present

14

Line drawing of a modern side table with four legs and one front shelf (no text or symbols)

K	X20

15 WALL J ① J X1 M6×30 Ø4×35mm Ø3.5×14mm 16

COMPLETION

Line drawing of a modern side table with bookshelves and legs (no text or symbols)

Hersteller: Shanghaimuxinmuyeyouxiangongsi

Adresse: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai, 200.000 CN.

Nach AUS importiert: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD

NSW 2122 Australien

Importiert in die USA: Sanven Technology Ltd. Suite 250, 9166 Anal Ort, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

Record Player Cabinet

MODELLO N.: KLEC-02

Line drawing of a modern open-plan cabinet with four legs and one shelf (no text or symbols)

Technical diagram showing 10 labeled components of a device or panel assembly, with numbered annotations for each part.

A	X12	B	X12	C	X12	D	X20
∅6×40mm		∅15×9.5		∅8×40		∅3.5×14mm
E	X4	F	X4	G	X8	H	X4
285mm				∅5×40mm		∅5
I	X6	J	X1	K	X20	L	X4
M3×14mm				∅20		∅15
	X1

1

A A A A A A A 1

A	X6

2

Isometric diagram of a rectangular plate with multiple vertical supports labeled 'A', no text or symbols present.

A	X6

3

Diagram showing two panels with labeled components (② and ⑤) and a central component marked 'C', likely illustrating a mechanical or electrical assembly.

1 2 3 4

C	X2
∅8×40
B	X2
∅15×9.5

∅8×40
B X2
∅15×9.5

4

Technical line drawing of two rectangular panels with labeled components (② and ⑥), no text or symbols present.

1 2 3 4

B	X2

5

Isometric line drawing of a two-panel cabinet or enclosure structure with labeled components (no text or symbols present)

1 2 3 4

B	X2

∅15×9.5

6

Technical diagram of a modular wall assembly with numbered components and close-up insets showing pin connections.

1 2 3 4

C	X2
∅8×40
B	X6
∅15×9.5

∅8×40
∅15×9.5

7

Technical diagram of a mechanical cabin with numbered components and directional arrows indicating flow or movement.

8 G C G G C ④ C G G ⑦ ① G X8 Ø5×40mm C X8 Ø8×40

G X8 Ø5×40mm C X8 Ø8×40

9

D D D D D F ②

D	X20
∅3.5*14mm
F	X4

10

Technical line drawing of a rectangular electronic device with four labeled ports (E) and a base, showing rotational arrows indicating motion or rotation.

L	X4
∅15

∅15
285mm

11

Line drawing of a modern side table with numbered compartments and a small inset view of the cabinet (no text or symbols present)

I	X6

12

Technical line drawing of a wooden cabinet with labeled compartments and a magnified inset showing a component labeled H.

H	X4

13

Line drawing of a simple modular furniture cabinet with a handle and seat, no text or symbols present

14

Line drawing of a modern side table with four legs and one front shelf (no text or symbols)

K	X20

15 WALL J ① J X1 M6×30 Ø4×35mm Ø3.5×14mm 16

COMPLETION

Line drawing of a modern side table with bookshelves and legs (no text or symbols)

Importato in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122Australia

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

Record Player Cabinet

NÚMERO DE MODELO: KLEC-02

Line drawing of a modern open-plan cabinet with four legs and one shelf (no text or symbols)

Technical diagram showing 10 labeled components of a device or panel assembly, with numbered annotations for each part.

A	X12	B	X12	C	X12	D	X20
∅6×40mm		∅15×9.5		∅8×40		∅3.5×14mm
E	X4	F	X4	G	X8	H	X4
285mm				∅5×40mm		∅5
I	X6	J	X1	K	X20	L	X4
M3×14mm				∅20		∅15
	X1

1

Isometric diagram of seven identical cylindrical objects labeled 'A' arranged on a flat base, with a circled number 1 at the center (no text or symbols beyond labels)

A	X6

2

Isometric diagram of a rectangular plate with multiple vertical supports labeled 'A', and a circled number 2 on the side (no text or symbols beyond labels)

A	X6

3

Diagram showing two panels with labeled components (② and ⑤) and a central component marked 'C', likely illustrating a mechanical or electrical assembly.

1 2 3 4

C	X2
∅8×40
B	X2
∅15×9.5

∅8×40
B X2
∅15×9.5

4

Technical line drawing of two rectangular panels with labeled components (② and ⑥), no text or symbols present.

Diagram showing four steps of a tool installation or repair procedure, labeled 1 to 4 with numbered components.

B	X2

5

Isometric line drawing of a two-panel cabinet or enclosure structure with labeled components (no text or symbols present)

1 2 3 4

B	X2

∅15×9.5

6

Technical diagram of a modular wall assembly with numbered components and close-up insets showing pin connections.

1 2 3 4

C	X2
∅8×40
B	X6
∅15×9.5

∅8×40
∅15×9.5

7

Technical diagram of a mechanical cabin with numbered components and directional arrows indicating flow or movement.

8 G C G G C ④ C G G ⑦ ① G X8 Ø5×40mm C X8 Ø8×40

G X8 Ø5×40mm C X8 Ø8×40

9

D D D D D F ②

D	X20
∅3.5*14mm
F	X4

10

Technical line drawing of a rectangular electronic device with four labeled ports (E) and a base, showing rotational arrows indicating motion or rotation.

L	X4
∅15
285mm

∅15
285mm

11

Line drawing of a modern side table with numbered compartments and a close-up inset showing the interior door (no text or symbols present)

I	X6

12

Technical line drawing of a wooden cabinet with labeled compartments and a magnified inset showing a component labeled H.

H	X4

13

Line drawing of a simple modular furniture cabinet with a handle and seat, no text or symbols present

14

Line drawing of a modern side table with four legs and one front shelf (no text or symbols)

K	X20

15 WALL J ① J X1 M6×30 Ø4×35mm Ø3.5×14mm 16

COMPLETION

Line drawing of a modern side table with bookshelves and legs (no text or symbols)

Fabricante: Shanghaimuxinmuyeyouxiangongsi

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

Record Player Cabinet

NR MODELU: KLEC-02

Line drawing of a modern open-plan cabinet with four legs and one shelf (no text or symbols)

POTRZEBUJESZ POMOCY? SKONTAKTUJ SIE Z NAMI!

Technical diagram showing 10 labeled components of a device or panel assembly, with numbered annotations for each part.

A	X12	B	X12	C	X12	D	X20
∅6×40mm		∅15×9.5		∅8×40		∅3.5×14mm
E	X4	F	X4	G	X8	H	X4
[4HGS]285mm				∅5×40mm		∅5
I	X6	J	X1	K	X20	L	X4
M3×14mm				∅20		∅15
	X1

1

Isometric diagram of a rectangular plate with multiple vertical supports and labeled points A, marked with a circle containing number 1 (no text or symbols on the plate itself)

A	X6

2

Isometric diagram of a rectangular plate with multiple vertical supports labeled 'A', and a circled number 2 on the side (no text or symbols beyond labels)

A	X6

3

Diagram showing two panels with labeled components (② and ⑤) containing multiple screw-like fixtures, likely illustrating a mechanical or electrical assembly.

1 2 3 4

C	X2
8 × 40
B	X2
15 × 9.5

∅8×40
B X2
∅15×9.5

4

Technical line drawing of two rectangular panels with labeled components (② and ⑥), no text or symbols present.

1 2 3 4

B	X2

5

Isometric line drawing of a two-panel metal frame structure with labeled components (no text or symbols)

1 2 3 4

B	X2

∅15×9.5

6

Technical diagram of a modular wall assembly with numbered components and close-up insets showing pin connections.

1 2 3 4

C	X2
∅8×40
B	X6
∅15×9.5

∅8×40
∅15×9.5

7

Technical diagram of a mechanical cabin with numbered components and directional arrows indicating flow or movement.

8 G C G G C ④ C G G ⑦ ① G X8 Ø5×40mm C X8 Ø8×40

G X8 Ø5×40mm C X8 Ø8×40

9

Technical line drawing of a rectangular electronic device with two labeled components (D and F), no text or symbols present.

D	X20
∅3.5*14mm
F	X4

10

Technical line drawing of a rectangular device with four labeled ports (E) and a numbered base, showing rotational arrows indicating motion or movement (no text or symbols beyond labels)

L	X4
∅15

∅15
285mm

11

Line drawing of a modern side table with numbered compartments and a close-up inset showing the interior door (no text or symbols present)

I	X6

12

Technical line drawing of a wooden cabinet with labeled compartments and a magnified inset showing a component labeled H.

H	X4

13

Line drawing of a simple modular furniture cabinet with a handle and seat, no text or symbols present

14

Line drawing of a modern side table with four legs and one front shelf (no text or symbols)

K	X20

15 WALL J ① J X1 M6×30 Ø4×35mm Ø3.5×14mm 16

COMPLETION

Line drawing of a modern side table with bookshelves and legs (no text or symbols)

Producent: Shanghaimuxinmuyeyouxiangongsi

Adres: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Szanghaj 200000 CN.

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technisch Ondersteuning en e-garantiecertificaat www.vevor.com/support

PLATENSPELER KAST US E R HANDLEIDING

MODELNR.: KLEC-02

Record Player Cabinet

MODEL NR.: KLEC-02

Line drawing of a modern open-plan cabinet with four legs and one shelf (no text or symbols)

HULP NODIG? NEEM CONTACT MET ONS OP!

Technical diagram showing 10 labeled components of a device or panel assembly, with numbered annotations for each part.

A	X12	B	X12	C	X12	D	X20
∅6×40mm		∅15×9.5		∅8×40		∅3.5×14mm
E	X4	F	X4	G	X8	H	X4
285mm				∅5×40mm		∅5
I	X6	J	X1	K	X20	L	X4
M3×14mm				∅20		∅15
	X1

1

A A A A A A A 1

A	X6

2

Isometric diagram of a rectangular plate with multiple vertical supports labeled 'A', and a circled number 2 on the side (no text or symbols beyond labels)

A	X6

3

Diagram showing two panels with labeled components (② and ⑤) containing multiple screw-like fixtures, likely illustrating a mechanical or electrical assembly.

1 2 3 4

C	X2
∅8×40
B	X2
∅15×9.5

∅8×40
B X2
∅15×9.5

4

Technical line drawing of two rectangular panels with labeled components (② and ⑥), no text or symbols present.

1 2 3 4

B	X2

5

Isometric line drawing of a two-panel cabinet or enclosure structure with labeled components (no text or symbols present)

1 2 3 4

B	X2

∅15×9.5

6

Technical diagram of a modular wall assembly with numbered components and close-up insets showing pin connections.

1 2 3 4

C	X2
∅8×40
B	X6
[DSAW]∅15×9.5

∅8×40
∅15×9.5

7

Technical diagram of a mechanical cabin with numbered components and directional arrows indicating flow or movement.

8 G C G G C ④ C G G ⑦ ① G X8 Ø5×40mm C X8 Ø8×40

G X8 Ø5×40mm C X8 Ø8×40

9

D D D D F ②

D	X20
∅3.5*14mm
F	X4

10

Technical line drawing of a rectangular electronic device with four labeled ports (E) and a base, showing rotational arrows indicating motion or rotation.

L	X4
∅15
285mm

∅15
285mm

11

Line drawing of a modern side table with numbered compartments and a close-up inset showing the interior door (no text or symbols present)

I	X6

12

Technical line drawing of a wooden cabinet with labeled compartments and a magnified inset showing a component labeled H.

H	X4

13

Line drawing of a simple modular furniture cabinet with a handle and seat, no text or symbols present

14

Line drawing of a modern side table with four legs and one front shelf (no text or symbols)

K	X20

15 WALL J ① J X1 M6×30 Ø4×35mm Ø3.5×14mm 16

COMPLETION

Line drawing of a modern side table with bookshelves and legs (no text or symbols)

Fabrikant: Shanghaimuxinmuyeyouxiangongsi

Adres: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai 200.000 CN.

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

Technisch Ondersteuning en e-garantiecertificaat www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Record Player Cabinet

MODELLNR: KLEC-02

Line drawing of a modern open-plan cabinet with four legs and one shelf (no text or symbols)

BEHÖVER HJÄLP? KONTAKTA OSS!

Technical diagram showing 10 labeled components of a device or panel assembly, with numbered annotations for each part.

A	X12	B	X12	C	X12	D	X20
∅6×40mm		∅15×9.5		∅8×40		∅3.5×14mm
E	X4	F	X4	G	X8	H	X4
285mm				∅5×40mm		∅5
I	X6	J	X1	K	X20	L	X4
M3×14mm				∅20		∅15
	X1

1

Isometric diagram of a rectangular plate with multiple vertical supports and labeled points A, marked with a circle containing number 1 (no text or symbols on the plate itself)

A	X6

2

Isometric diagram of a rectangular plate with multiple vertical supports labeled 'A', and a circled number 2 on the side (no text or symbols beyond labels)

A	X6

3

Diagram showing two panels with labeled components (② and ⑤) and a central component marked 'C', likely illustrating a mechanical or electrical assembly.

1 2 3 4

C	X2
∅8×40
B	X2
∅15×9.5

∅8×40
B X2
∅15×9.5

4

Technical line drawing of two rectangular panels with labeled components (② and ⑥), no text or symbols present.

1 2 3 4

B	X2

5

Isometric line drawing of a two-panel cabinet or enclosure structure with labeled components (no text or symbols present)

1 2 3 4

B	X2

∅15×9.5

6

Technical diagram of a modular wall assembly with numbered components and close-up insets showing pin connections.

1 2 3 4

C	X2
∅8×40
B	X6
∅15×9.5

∅8×40
∅15×9.5

7

Technical diagram of a mechanical cabin with numbered components and directional arrows indicating flow or movement.

8 G C G G C ④ C G G ⑦ ① G X8 Ø5×40mm C X8 Ø8×40

G X8 Ø5×40mm C X8 Ø8×40

9

D D D D D F ②

D	X20
∅3.5×14mm
F	X4

10

Technical line drawing of a rectangular electronic device with four labeled ports (E) and a base, showing rotational arrows indicating motion (no text or symbols beyond labels)

L	X4
∅15
285mm

∅15
285mm

11

Line drawing of a modern side table with numbered compartments and a close-up inset showing the interior door (no text or symbols present)

I	X6

12

Technical line drawing of a wooden cabinet with labeled compartments and a magnified inset showing a component labeled H.

H	X4

13

Line drawing of a simple modular furniture cabinet with a handle and seat, no text or symbols present

14

Line drawing of a modern side table with four legs and one front shelf (no text or symbols)

K	X20

15 WALL J ① J X1 M6×30 Ø4×35mm Ø3.5×14mm 16

COMPLETION

Line drawing of a modern side table with bookshelves and legs (no text or symbols)

Tillverkare: Shanghaimuxinmuyeyouxiangongsi

Adress: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200 000 CN.

Importerad till AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOC NSW 2122 Australien

Importerad till USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support