KLLT-06 - Table Vevor - Free user manual and instructions

USER MANUAL KLLT-06 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

FARMHOUSE COFFEE TABLE USER MANUAL

MODEL:KLLT-06

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to co all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually Saving Half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

Isometric line drawing of a structural frame with diagonal bracing and central support (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of o user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you ag there are any technology or software updates on our product.

WARNING:

Read this material before using this product. Failure to do so ca result in serious injury.

Assembly precautions

1. Assemble only according to these instructions. Improper assembly c create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
3. Keep the assembly area clean and well-lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble if tired or when under the influence of alcohol, or medication.
6. The product capabilities apply to properly and completely assembled products only.
7. Assemble on a flat, level, hard and smooth surface capable of sa supporting the Farmhouse Coffee Table.
8. For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unw and separate all parts in a clean work area.

Use precautions

1. DO NOT SIT OR STAND ON THIS ITEM.
2. This product is not a toy. Do not allow children to play with or item.
3. Do not exceed specified weight capacities.
4. Use only on a flat, level, hard, and smooth surface that can safe support a fully loaded Farmhouse Coffee Table.
5. Use as intended only.
6. Inspect before every use; do not use if parts are loose or damage

SAVE THIS MANUAL

Technical diagram of a structural frame assembly with numbered components and corresponding engineering drawings below.

1

⑤ x2pcs ③ x2pcs A*8

A*8+C*24

2

2 ⑤ x2pcs ③ ③

Technical diagram illustrating three-step machining process: step 1 with tool, step 2 with airplane component, and step 3 with drilling rig.

B*8

3

3 ④ x2pcs

A*16

4

Technical diagram of a structural frame assembly with numbered components for engineering reference.

B*16

5

Technical line drawing of a rectangular industrial or mechanical housing with internal components and mounting holes (no text or symbols)

E^2+J^4
6

Isometric line drawing of a rectangular metal beam with two small protrusions and a central circular feature labeled '②' (no text or symbols beyond the number)

A*4

7

Technical diagram of a structural frame with numbered components, likely for engineering or architectural drawing.

B*4

8

① ② ① F*24+1*4

F^24+1^4

9

Technical diagram of a structural frame with numbered components and an inset showing a mechanical assembly detail.

D*8+K*1

10

0 ① ③ ③ D*8+K*1+G*28

11 F*32+H*8

Isometric line drawing of a structural frame with triangular supports and beams (no text or symbols)

Model	KLLT-06
Safe Loading Weight	75 LBS
Colour	Grey Brown
Product Size	914*914*463mm

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

TABLE BASSE DE FERME

Isometric line drawing of a structural frame with diagonal bracing and support beams (no text or symbols)

BESOIN D'AIDE? CONTACTEZ-NOUS!

Technical diagram of a structural frame assembly with numbered components and corresponding engineering drawings below.

1

⑤ x2pcs ③ x2pcs A*8

A*8+C*24

2

2 ⑤ x2pcs ③ ③

Technical diagram illustrating three-step machining process: step 1 with tool, step 2 with airplane component, and step 3 with drilling rig.

B*8

3

3 ④ x2pcs

A*16

4

Technical diagram of a structural frame assembly with numbered components for engineering reference.

B*16

5

Technical line drawing of a rectangular industrial or mechanical housing with internal components and mounting holes (no text or symbols)

E^2+J^4
6

Isometric line drawing of a long rectangular metal beam with two small protrusions and a central circular feature labeled '②' (no text or symbols beyond the number)

A*4

7

Technical diagram of a structural frame with numbered components, likely for engineering or architectural drawing.

B*4

8

① ② ① F*24+1*4

F*24+I*4

9

Technical diagram of a structural frame with numbered components and an inset magnified view showing a mechanical assembly.

D*8+K*1

10

0 ① ③ ③ D*8+K*1+G*28

11 F*32+H*8

Isometric line drawing of a structural frame with triangular supports and diagonal braces (no text or symbols)

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Isometric line drawing of a structural frame with diagonal bracing and support beams (no text or symbols)

www.vevor.com/support

Technical diagram of a structural frame assembly with numbered components and corresponding engineering drawings below.

1

⑤ x2pcs ③ x2pcs A*8

A*8+C*24

2

2 ⑤ x2pcs ③ ③

Technical diagram illustrating three-step machining process: step 1 with tool, step 2 with airplane component, and step 3 with drilling rig.

B*8

3

3 ④ x2pcs

A*16

4

Technical diagram of a structural frame assembly with numbered components for engineering reference.

B*16

5

Technical line drawing of a rectangular industrial or mechanical housing with internal components and mounting holes (no text or symbols)

E^2+J^4
6

Isometric line drawing of a rectangular metal beam with two small protrusions and a central circular feature labeled '②' (no text or symbols beyond the number)

A*4

7

Technical diagram of a structural frame with numbered components, likely for engineering or architectural drawing.

B*4

8

① ② ① F*24+1*4

F*24+I*4

9

Technical diagram of a structural frame with numbered components and an inset magnified view showing a mechanical assembly.

D*8+K*1

10

0 ① ③ ③ D*8+K*1+G*28

11 F*32+H*8

Isometric line drawing of a structural frame with triangular supports and diagonal braces (no text or symbols)

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Isometric line drawing of a structural frame with diagonal bracing and support beams (no text or symbols)

Technical diagram of a structural frame assembly with numbered components and corresponding engineering drawings below.

1

⑤ x2pcs ③ x2pcs A*8

A*8+C*24

2

2 ⑤ x2pcs ③ ③

Technical diagram illustrating three-step machining process: step 1 with tool, step 2 with airplane component, and step 3 with drilling rig.

B*8

3

3 ④ x2pcs

A*16

4

Technical diagram of a structural frame assembly with numbered components for engineering reference.

B*16

5

Technical line drawing of a rectangular industrial or mechanical housing with internal components and mounting holes (no text or symbols)

E^2 + J^4
6

Isometric line drawing of a long rectangular metal beam with two small protrusions and a central circular feature labeled '②' (no text or symbols beyond the number)

A*4

7

Technical diagram of a structural frame with numbered components, likely for engineering or construction purposes.

B*4

8

① ② ① F*24+1*4

F*24+I*4

9

Technical diagram of a structural frame with numbered components and an inset showing a mechanical assembly detail.

D*8+K*1

10

0 ① ③ ③ D*8+K*1+G*28

11 F*32+H*8

Isometric line drawing of a structural frame with triangular supports and diagonal braces (no text or symbols)

Importato in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Importato negli USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Isometric line drawing of a structural frame with diagonal bracing and support beams (no text or symbols)

Technical diagram of a structural frame assembly with numbered components and corresponding engineering drawings below.

1

⑤ x2pcs ③ x2pcs A*8

A*8+C*24

2

2 ⑤ x2pcs ③ ③

Technical diagram illustrating three-step machining process: step 1 with a block, step 2 with a cylindrical component, and step 3 with a tool inserted into a base.

B*8

3

3 ④ x2pcs

A*16

4

Technical diagram of a structural frame assembly with numbered components for engineering reference.

B*16

5

Technical line drawing of a rectangular industrial or mechanical housing with internal components and mounting holes (no text or symbols)

E^2+J^4
6

Isometric line drawing of a long rectangular metal beam with two small protrusions and a central circular feature labeled '②' (no text or symbols beyond the number)

A*4

7

Technical diagram of a structural frame with numbered components, likely for engineering or construction purposes.

B*4

8

① ② ① F*24+1*4

F*24+I*4

9

Technical diagram of a structural frame with numbered components and an inset showing a mechanical assembly detail.

D*8+K*1

10

0 ① ③ ③ D*8+K*1+G*28

11 F*32+H*8

Isometric line drawing of a structural frame with triangular supports and diagonal braces (no text or symbols)

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Isometric line drawing of a structural frame with diagonal bracing and support beams (no text or symbols)

POTRZEBUJESZ POMOCY? SKONTAKTUJ SIE Z NAMI!

Technical diagram of a structural frame assembly with numbered components and corresponding engineering drawings below.

1

⑤ x2pcs ③ x2pcs A*8

A*8+C*24

2

2 ⑤ x2pcs ③ ③

graph TD
    A["Initial Component"] --> B["Assembly Step 1"]
    B --> C["Add to a cylindrical part with a screw head"]
    C --> D["Final Drill Bit"]
    D --> E["End"]

B*8

3

3 ④ x2pcs

A*16

4

Technical diagram of a structural frame assembly with numbered components for engineering reference.

B*16

5

Technical line drawing of a rectangular industrial or mechanical housing with internal components and mounting holes (no text or symbols)

E^2+J^4
6

Isometric line drawing of a long rectangular metal beam with two small protrusions and a central circular feature labeled '②' (no text or symbols beyond the number)

A*4

7

Technical diagram of a structural frame with labeled components, showing internal beams and supports.

B*4

8

① ② ① F*24+1*4

F^24+1^4

9

Technical diagram of a structural frame with numbered components and an inset magnified view showing a mechanical assembly.

D*8+K*1

10

0 ① ③ ③ D*8+K*1+G*28

11 F*32+H*8

Isometric line drawing of a structural frame with triangular supports and beams (no text or symbols)

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technisch Ondersteuning en E-garantiecertificaat www.vevor.com/support

BOERDERIJ SALONTAFEL

Isometric line drawing of a structural frame with diagonal bracing and support beams (no text or symbols)

HULP NODIG? NEEM CONTACT MET ONS OP!

Technical diagram of a structural frame assembly with numbered components and corresponding engineering drawings below.

1

⑤ x2pcs ③ x2pcs A*8

A*8+C*24

2

2 ⑤ x2pcs ③ ③

Technical diagram illustrating three-step machining process: step 1 with tool, step 2 with airplane component, and step 3 with drilling rig.

B*8

3

3 ④ x2pcs

A*16

4

Technical diagram of a structural frame assembly with numbered components for engineering reference.

B*16

5

Technical line drawing of a rectangular industrial or mechanical housing with internal components and mounting holes (no text or symbols)

E^2 + J^4
6

Isometric line drawing of a long rectangular metal beam with two small protrusions and a central circular feature labeled '②' (no text or symbols beyond the number)

A*4

7

Technical diagram of a structural frame with numbered components, likely for engineering or construction purposes.

B*4

8

① ② ① F*24+1*4

F*24+I*4

9

Technical diagram of a structural frame with numbered components and an inset magnified view showing a mechanical assembly.

D*8+K*1

10

0 ① ③ ③ D*8+K*1+G*28

11 F*32+H*8

Isometric line drawing of a structural frame with triangular supports and beams (no text or symbols)

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Isometric line drawing of a structural frame with diagonal bracing and vertical supports (no text or symbols)

BEHÖVER HJÄLP? KONTAKTA OSS!

Technical diagram of a structural frame assembly with numbered components and corresponding engineering drawings below.

1

⑤ x2pcs ③ x2pcs A*8

A*8+C*24

2

2 ⑤ x2pcs ③ ③

Technical diagram illustrating three-step machining process: step 1 with tool, step 2 with airplane component, and step 3 with drilling rig.

B*8

3

3 ④ x2pcs

A*16

4

Technical diagram of a structural frame assembly with numbered components for engineering reference.

B*16

5

Technical line drawing of a rectangular industrial or mechanical housing with internal components and mounting holes (no text or symbols)

E^2+J^4
6

Isometric line drawing of a long rectangular metal beam with two small protrusions and a central circular feature labeled '②' (no text or symbols beyond the number)

A*4

7

Technical diagram of a structural frame with numbered components, likely for engineering or construction purposes.

B*4

8

① ② ① F*24+1*4

F*24+I*4

9

Technical diagram of a structural frame with numbered components and an inset magnified view showing a mechanical assembly.

D*8+K*1

10

0 ① ③ ③ D*8+K*1+G*28

11 F*32+H*8

Isometric line drawing of a structural frame with triangular supports and beams (no text or symbols)

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support