KLBS-04 - Wardrobe Vevor - Free user manual and instructions

USER MANUAL KLBS-04 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

DESK SHELF

MODEL:KLBS-04/KLBS-05/KLBS-06

Desk Shelf installation guide: https://youtube.com/shorts/d327aOGBGJY

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to co all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually Saving Half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

DESK SHELF

MODEL:KLBS-04 / KLBS-05/KLBS-06

Isometric line drawing of a multi-level cabinet or shelf unit (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of o user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you ag there are any technology or software updates on our product.

WARNING:

Read this material before using this product. Failure to do so may result in serious injury.

Assembly precautions

1. Assemble only according to these instructions. Improper assembly may create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
3. Keep the assembly area clean and well-lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble if tired or when under the influence of alcohol, or medication.
6. The product capabilities apply to properly and completely assembled products only.
7. Assemble on a flat, level, hard and smooth surface capable of sa supporting the Desk Shelf.
8. If possible, you can use power tools to make assembly easier.
9. For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unw and separate all parts in a clean work area.

Use precautions

1. Do not exceed specified weight capacities.
2. Use only on a flat, level, hard, and smooth surface that can safe support a fully loaded Desk Shelf.
3. Use as intended only.
4. Inspect before every use; do not use if parts are loose or damage

SAVE THIS MANUAL

F X8 G X6 X1 15*30 Ø5×40mm A X24+1 B X24+1 C X7+1 D X2 E X24 Ø6×40mm Ø15×11 Ø8×40 M6×30 Ø4×35mm Ø3×14mm Ø20

ASSEMBLY STEP

1

Isometric diagram of a rectangular plate with three vertical supports labeled A and a numbered circle (no text or symbols on the plate itself)

A X4 Ø6×40mm

2

Isometric diagram of a rectangular plate with multiple vertical cylindrical sensors labeled 'A', no text or symbols present.

Λ X9 Ø6×40mm

3 A X6 Ø6×40mm ① A A A A 180° 4 A X5 Ø6×40mm ⑥ A X5

5 B X2 Ø15×11 6 C X2 Ø8-40 B X3 Ø15×11

7 ⑦ ⑥ C ① 1 2 3 4 C X1 B X2 Ø8×40 Ø15×11 8 ① ② ③ ④ C X3 Ø8×40 B X7 Ø15×11 ⑤ C ⑦ ⑧

9

Technical diagram of a structural assembly with labeled components 1, 2, and 3

B	X4

∅15×11

10

Technical diagram of a metal bracket assembly with numbered components and close-up insets showing tool positioning.

B	X2

∅15×11

11

1 2 3 4

Technical diagram of a structural assembly with numbered components and connection point labeled 'c'

C | X1 Ø8-40 B | X4 Ø 15×11

12

2 G G G ⑦ G G G G ② G

G X6 Ø5×40mm

13

④ ⑥ ⑤ F F F F F F F F F F F F F X8 15*30

F X8 15*30

14

Isometric line drawing of a multi-level storage cabinet or rack unit with no text or symbols

E	X24

15 WALL ④ ⑤ D

D	X2

PRODUCT PARAMETER

Model	KLBS-04	KLBS-05	KLBS-06
Colour	Black	White	Wood
Safe Loading Weight	132 lbs
Product Size(L×D×H)	945*241*734mm
Net Weight	11.45kg

* Products such as specifications, appearance, and design are subject to modification without prior notice.

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

MODÈLE : KLBS-04/KLBS-05/KLBS-06

Isometric line drawing of a multi-level office cabinet or shelf with curved compartments (no text or symbols)

BESOIN D'AIDE? CONTACTEZ-NOUS!

Isometric view of a rectangular plate with three vertical supports labeled A and a circled number 4, no text or symbols present.

A	X4

2

Isometric diagram of a rectangular plate with multiple vertical cylindrical sensors labeled 'A', no text or symbols present.

A	X9

3 A X6 Ø6×40mm ① A A A A 180° 4 A X5 Ø6×40mm ⑥ A X5

5 B X2 Ø15×11 6 C X2 Ø8×40 B X3 Ø15×11

7 ⑦ ⑥ C ① 1 2 3 4 C X1 B X2 Ø8=40 Ø15×11 8 ① ② ③ ④ C X3 Ø8×40 B X7 Ø15×11 ⑤ C ⑦ ⑧

11

1 2 3 4 C B

Technical diagram of a structural assembly with numbered components and dimension annotation

C	X1
B	X4

14

Isometric line drawing of a multi-level cabinet or shelf structure with no text or symbols

E	X24

15 WALL ④ ⑤ D

D	X2

PARAMÈTRE DU PRODUIT

A/S YH Consulting Limited Bureau 147, Centurion

Maison, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

MODELL: KLBS-04/KLBS-05/KLBS-06

Isometric line drawing of a multi-level office cabinet or shelf with curved compartments (no text or symbols)

Isometric line drawing of a rectangular plate with three vertical sensors labeled A and a circle containing number 4 (no text or symbols on the plate itself)

A	X4
	∅6×40mm

2

Isometric line drawing of a rectangular plate with multiple vertical cylindrical sensors labeled 'A', no text or symbols present.

A	X9
	∅6×40mm

3 A X6 Ø6×40mm ① A A A A 180° 4 A X5 Ø6×40mm ⑥ A X5

5 B X2 Ø15×11 6 C X2 Ø8×40 B X3 Ø15×11

7 ⑦ ⑥ C ① 1 2 3 4 C X1 B X2 Ø8=40 Ø15×11 8 ① ② ③ ④ C X3 Ø8×40 B X7 Ø15×11 ⑤ C ⑦ ⑧

11

1 2 3 4 C B

Technical diagram of a structural assembly with numbered components and dimension annotation

C	X1
B	X4

PRODUKTPARAMETER

C/O YH Consulting Limited Office 147, Centurion

Haus, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

MODELLO:KLBS-04/KLBS-05/KLBS-06

MODELLO:KLBS-04 / KLBS-05/KLBS-06

Isometric line drawing of a multi-level office cabinet or shelf unit (no text or symbols)

Isometric line drawing of a rectangular plate with three vertical sensors labeled A and a circle containing number 4 (no text or symbols on the plate itself)

A	X4
	∅6×40mm

2

Isometric line drawing of a rectangular plate with multiple vertical cylindrical sensors labeled 'A', no text or symbols present.

A	X9
	∅6×40mm

3 A X6 Ø6×40mm ① A A A A 180° 4 A X5 Ø6×40mm ⑥ A X5

5 B X2 Ø15×11 6 C X2 Ø8×40 B X3 Ø15×11

7 ⑦ ⑥ C ① 1 2 3 4 C X1 B X2 Ø8=40 Ø15×11 8 ① ② ③ ④ C X3 Ø8×40 B X7 Ø15×11 ⑤ C ⑦ ⑧

11

1 2 3 4 C B

Technical diagram of a structural assembly with numbered components and dimension annotation

C	X1
B	X4

12 G X6 Ø5×40mm 13 F X8 15*30

14

Isometric line drawing of a multi-level cabinet or shelf structure with no text or symbols

E	X24

15 WALL ④ ⑤ D

D	X2

PARAMETRO PRODOTTO

Importato in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD

Nuovo Galles del Sud 2122 Australia

C/O YH Consulting Limited Ufficio 147, Centurion

Casa, London Road, Staines-upon-Thames, Surrey,

Modello TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

MODELO:KLBS-04/KLBS-05/KLBS-06

Isometric line drawing of a multi-level office cabinet or shelf with curved compartments (no text or symbols)

Isometric line drawing of a rectangular plate with three vertical sensors labeled A and a circle containing number 4 (no text or symbols on the plate itself)

A	X4
	∅6×40mm

2

Isometric line drawing of a rectangular plate with multiple vertical cylindrical sensors labeled 'A', no text or symbols present.

A	X9

3 A X6 Ø6×40mm ① A A A A 180° 4 A X5 Ø6×40mm ⑥ A X5

5 B X2 Ø15×11 6 C X2 Ø8×40 B X3 Ø15×11

7 ⑦ ⑥ C ① 1 2 3 4 C X1 B X2 Ø8=40 Ø15×11 8 ① ② ③ ④ C X3 Ø8×40 B X7 Ø15×11 ⑤ C ⑦ ⑧

11

1 2 3 4 C B

Technical diagram of a structural assembly with numbered components and dimension annotation

C	X1
B	X4

14

Isometric line drawing of a multi-level cabinet or shelf structure with no text or symbols

E	X24

15 WALL ④ ⑤ D

D	X2

PARÁMETRO DEL PRODUCTO

Casa, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

MODEL:KLBS-04/KLBS-05/KLBS-06

MODEL:KLBS-04 / KLBS-05/KLBS-06

Isometric line drawing of a multi-level office cabinet or shelf with curved compartments (no text or symbols)

POTRZEBUJESZ POMOCY? SKONTAKTUJ SIE Z NAMI!

Isometric line drawing of a rectangular plate with three vertical sensors labeled A and a circle containing number 4 (no text or symbols on the plate itself)

A	X4
	∅6×40mm

2

Isometric line drawing of a rectangular plate with multiple vertical cylindrical sensors labeled 'A', no text or symbols present.

A	X9

3 A X6 Ø6×40mm ① A A A A 180° 4 A X5 Ø6×40mm ⑥ A X5

5 B X2 Ø15×11 6 C X2 Ø8×40 B X3 Ø15×11

7 ⑦ ⑥ C ① 1 2 3 4 C X1 B X2 Ø8=40 Ø15×11 8 ① ② ③ ④ C X3 Ø8×40 B X7 Ø15×11 ⑤ C ⑦ ⑧

11

1 2 3 4

Technical diagram of a structural assembly with numbered components and dimension annotation

C	X1
B	X4

14

Isometric line drawing of a multi-level cabinet or shelf structure with no text or symbols

E	X24

15 WALL ④ ⑤ D

D	X2

PARAMETR PRODUKTU

C/O YH Consulting Limited Biuro 147, Centurion

Dom, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

MODEL: KLBS-04/KLBS-05/KLBS-06

MODEL: KLBS-04 / KLBS-05/KLBS-06

Isometric line drawing of a multi-level office cabinet or shelf with curved compartments (no text or symbols)

HULP NODIG? NEEM CONTACT MET ONS OP!

Isometric line drawing of a rectangular plate with three vertical sensors labeled A and a circle containing number 4 (no text or symbols on the plate itself)

A	X4
	∅6×40mm

2

Isometric line drawing of a rectangular plate with multiple vertical cylindrical sensors labeled 'A', no text or symbols present.

A	X9

3 A X6 Ø6×40mm ① A A A A 180° 4 A X5 Ø6×40mm ⑥ A X5

5 B X2 Ø15×11 6 C X2 Ø8×40 B X3 Ø15×11

7 ⑦ ⑥ C ① 1 2 3 4 C X1 B X2 Ø8=40 Ø15×11 8 ① ② ③ ④ C X3 Ø8×40 B X7 Ø15×11 ⑤ C ⑦ ⑧

11

1 2 3 4 C B

Technical diagram of a structural assembly with numbered components and dimension annotation

C	X1
B	X4

12 G X6 Ø5×40mm 13 F X8 15*30

14

Isometric line drawing of a multi-level cabinet or shelf structure with no text or symbols

E	X24

15 WALL ④ ⑤ D

D	X2

PRODUCTPARAMETER

Model	KLBS-04 KLBS-05		KLBS-06
Kleur	Zwart	Wit	Hout
Veilig laadgewicht	132 pond
Productafmetingen (L×B×H)	945*241*734mm
Netto gewicht	11,45 kg

C/O YH Consulting Limited Kantoor 147, Centurion Huis, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Technische ondersteuning en e- garantiecertificaat www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

MODELL:KLBS-04/KLBS-05/KLBS-06

MODELL:KLBS-04 / KLBS-05/KLBS-06

Isometric line drawing of a multi-level office cabinet or shelf with curved compartments (no text or symbols)

BEHÖVER HJÄLP? KONTAKTA OSS!

Isometric line drawing of a rectangular plate with three vertical sensors labeled A and a circle containing number 4 (no text or symbols on the plate itself)

A	X4
	∅6×40mm

2

Isometric line drawing of a rectangular plate with multiple vertical cylindrical sensors labeled 'A', no text or symbols present.

A	X9
	∅6×40mm

3 A X6 Ø6×40mm ① A A A A 180° 4 A X5 Ø6×40mm ⑥ A X5

5 B X2 Ø15×11 6 C X2 Ø8×40 B X3 Ø15×11

7 ⑦ ⑥ C ① 1 2 3 4 C X1 B X2 Ø8=40 Ø15×11 8 ① ② ③ ④ C X3 Ø8×40 B X7 Ø15×11 ⑤ C ⑦ ⑧

11

1 2 3 4 C B

Technical diagram of a structural assembly with numbered components and dimension annotation

C	X1
B	X4

12 G X6 Ø5×40mm 13 F X8 15*30

14

Isometric line drawing of a multi-level cabinet or shelf structure with no text or symbols

E	X24

15 WALL ④ ⑤ D

D	X2

PRODUKTPARAMETER

Modell KLBS-05 KLBS-06	KLBS-04
Färg	Svart		TräVit
Säker lastvikt	132 lbs
Produktstorlek (L×D×H)	945*241*734 mm
Nettovikt	11,45 kg

C/O YH Consulting Limited Office 147, Centurion

House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE