KLEC-04 - Wardrobe Vevor - Free user manual and instructions

USER MANUAL KLEC-04 Vevor

Technical Support and E-Warranty Certificate

www.vevor.com/support

RECORD PLAYER CABINET USER MANUAL

MODEL NO.: KLEC-03, KLEC-04, KLEC-05

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to co all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually Saving Half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

Record Player Cabinet

MODEL NO.: KLEC-03, KLEC-04, KLEC-05

Line drawing of a modular electronic cabinet with two compartments and four legs (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of o user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you ag there are any technology or software updates on our product.

WARNING:

Please read this manual carefully before using the product. Failure do so may result in serious injury.

ASSEMBLY PRECAUTIONS

1. Assemble only according to these instructions. Improper assembly c create hazards.

2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.

3. Keep the assembly area clean and well-lit.

4. Keep bystanders out of the area during assembly.

5. Do not assemble when tired or when under the influence of alcohol drugs or medication.

6. The product capabilities apply to properly and completely assembled products only.

7. Assemble on a flat, level, hard and smooth surface capable of sa supporting the Record Player Cabinet.

8. For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unwrap separate all parts in a clean work area.

SAVE THESE INSTRUCTIONS

USE PRECAUTIONS

TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:

1. This product is not a toy Do not allow children to play with or r item.
2. Do not exceed weight capacities, before moving.
3. Use only on a flat, hard and smooth surface capable of safely supporting a fully loaded Record Player Cabinet.
4. Use as intended only.

Inspect before every use; do not use if parts are loose or damaged.

TECHNICAL SPECIFICATIONS

Model	KLEC-03	KLEC-04	KLEC-05
Rating(s)	AC 110~120V,60Hz, 1500 W	AC220-240V,50/60Hz, 16A Ma	AC220-240V,50/60Hz, 10A Ma
ProductDimensions(LxWxH)(mm)	870*365*775
Net Weight(kg)	About 19.3

*Products such as specifications, appearance, and design are subject to modification without prior notice.

Exploded view diagram of a smartphone showing 10 labeled components for assembly or manufacturing purposes.

A	X10	B	X10	C	X16	D	X20
		15 × 9.5		8 × 30		3.5 × 14mm
E	X4	F	X4	G	X14	H	X2
170mm				5 × 40mm		H1	H2
I	X3	J	X6	K	X8	L	X2
		[M6×30mm]		M3×14mm
M	X24	N	X4	O	X8+1	P	X2
∅20		15		3 × 14mm		3.5 × 14mm
Q	X1
KLEC-03		KLEC-04		KLEC-05

1

A A ①

A X2 Ø6×40mm

2

Isometric line drawing of a rectangular plate with two labeled points A and a numbered circle (no text or symbols beyond labels)

A X2 Ø6×40mm

3

1 2 3 4

A A ⑥

Technical diagram showing two labeled components (⑤ and ⑥) mounted on a base plate, with an arrow indicating direction.

B	X2
∅15×9.5
A	X2
∅6×40mm

4

A A ④

A	X2

5

⑤ ⑥ ④ 1 2 3 4 B X2 Ø15×9.5

6

1 2 3 4 ⑤ A C ④ A C ⑧ C X2 Ø8×30 B X2 Ø15×9.5 A X2 Ø6×40mm

C	X2
B	X2
A	X2

7

⑧ Q P P ④

P X2 Ø3.5×14mm Q X1

8

1 2 3 4 5 6 ① ④ ⑥ ⑤ ① B X2 C X2 Ø15×9.5 Ø8×30

9

J J J J J J I I ⑨

J X6 M0×120mm I X3

10

Technical diagram of a door frame assembly with numbered components and tool icons for assembly steps

B X2 Ø15×9.5

11

G C G G G G G G G G G ③ ⑨ ④ ① G X8 Ø5×40m C X6 Ø8×30

G X8 Ø5×40mm C X6 Ø8×30

12

Technical diagram of a modular device with numbered components and directional arrow indicating flow or movement.

13 G C ⑨ C C ④ C C ① G ② G G G G G G Ø5×40mm G X6 C X6 Ø8×30

14

Technical line drawing of a rectangular metal enclosure with mounting holes and internal components (no text or symbols)

D | X20 Ø3.5×14mm F | X4

15

E N 9 E E E E X4 N

E	X4	N	X4

16

Line drawing of a wooden cabinet with a square vent and side legs, showing internal compartments and mounting points (no text or symbols)

K X8 Min1000

COMPLETION

Line drawing of a modular electronic device with two compartments and four legs (no text or symbols)

Correct Disposal

This product is subject to the provision of european Directive 2012/19. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products marked as such may not be discarded with normal domestic waste, but must be taken to a collection point for recycling electrical and electronic devices.

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Record Player Cabinet

N° DE MODÈLE : KLEC-03, KLEC-04, KLEC-05

Line drawing of a modular electronic cabinet with two internal compartments and four legs (no text or symbols)

BESOIN D'AIDE ? CONTACTEZ-NOUS!

Exploded view diagram of a smartphone showing 10 labeled components for assembly or manufacturing purposes.

A	X10	B	X10	C	X16	D	X20
		∅15×9.5		[kG3Z]∅8×30		[yg8c]∅3.5×14mm
E	X4	F	X4	G	X14	H	X2
170mm				∅5×40mm		H1	H2
I	X3	J	X6	K	X8	L	X2
		[HZW]M6×30mm		M3×14mm
M	X24	N	X4	O	X8+1	P	X2
∅20		∅15		∅3×14mm		∅3.5×14mm
Q	X1
KLEC-03		KLEC-04		KLEC-05

1

A A ①

A X2 Ø6×40mm

2

Isometric line drawing of a rectangular plate with two labeled points A and a numbered circle (no text or symbols beyond labels)

A X2 Ø6×40mm

3

1 2 3 4

A A ⑥

Technical diagram showing two labeled components (⑤ and ⑥) mounted on a base plate, with an arrow indicating direction.

B	X2
∅15×9.5
A	X2
∅6×40mm

4

A A ④

A	X2

5

⑤ ⑥ ④ 1 2 3 4 B X2 Ø15×9.5

6

1 2 3 4 ⑤ A C ④ A C ⑧ C X2 Ø8×30 B X2 Ø15×9.5 A X2 Ø6×40mm

C	X2
B	X2
A	X2

7

⑧ Q P P ④

P X2 Ø3.5×14mm Q X1

8

1 2 3 4 5 6 ① ④ ⑥ ⑤ ① B X2 C X2 Ø15×9.5 Ø8×30

9

J J J J J J I I ⑨

J X6 M0×120mm I X3

10

Technical diagram of a door frame assembly with numbered components and tool icons for assembly steps

B X2 Ø15×9.5

11

G C G G G G G G G G G ③ ⑨ ④ ① G X8 Ø5×40m C X6 Ø8×30

G X8 Ø5×40mm C X6 Ø8×30

12

Technical diagram of a modular device with numbered components and directional arrow indicating flow or movement.

13 G C ⑨ C C ④ C C ① G ② G G G G G G Ø5×40mm G X6 C X6 Ø8×30

14

Technical line drawing of a rectangular metal enclosure with mounting holes and internal components (no text or symbols)

D | X20 Ø3.5×14mm F | X4

15

Technical diagram of a mechanical housing with labeled components and a small inset showing a cylindrical component with 'E' and 'N' indicators.

E	X4	N	X4

16

Line drawing of a wooden cabinet with a square vent and side legs, showing internal compartments and mounting points (no text or symbols)

K X8 Min1000

COMPLETION

Line drawing of a modular electronic device with two compartments and four legs (no text or symbols)

Lieu, Rancho Cucamonga, CA 91730

YH CONSULTING LIMITED. C/O YH Consulting

UK REP Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

EC REP Mainzer Landstr.69, 60329 Frankfurt am Main.

©

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

Record Player Cabinet

MODELL NR.: KLEC-03, KLEC-04, KLEC-05

Line drawing of a modular electronic cabinet with two compartments and four legs (no text or symbols)

Exploded view diagram of a smartphone showing 10 labeled components for assembly or manufacturing purposes.

A	X10	B	X10	C	X16	D	X20
		∅15×9.5		∅8×30		∅3.5×14mm
E	X4	F	X4	G	X14	H	X2
170mm				∅5×40mm		H1	H2
I	X3	J	X6	K	X8	L	X2
		[M6×30mm]		M3×14mm
M	X24	N	X4	O	X8+1	P	X2
∅20		∅15		∅3×14mm		∅3.5×14mm
Q	X1
KLEC-03		KLEC-04		KLEC-05

1

A A ①

A X2 Ø6×40mm

2

Isometric technical drawing of a rectangular plate with two labeled points A and a numbered circle (no text or symbols beyond labels)

A X2 Ø6×40mm

3

1 2 3 4

A A ⑥

Technical diagram showing two labeled components (⑤ and ⑥) mounted on a base plate, with an arrow indicating direction.

B	X2
15 × 9.5
A	X2
6 × 40mm

4

A A ④

A	X2

5

⑤ ⑥ ④ 1 2 3 4 B X2 Ø15×9.5

6

1 2 3 4 ⑤ A C ④ A C ⑧ C X2 Ø8×30 B X2 Ø15×9.5 A X2 Ø6×40mm

C	X2
B	X2
A	X2

7

8 Q P P 4

P X2 Ø3.5×14mm Q X1

8

1 2 3 4 5 6 ① ④ ⑥ ⑤ ① B X2 C X2 Ø15×9.5 Ø8×30

9

J J J J J J I I ⑨

J X6 M0×120mm I X3

10

Technical diagram of a door frame assembly with numbered components and tool icons for assembly steps

B X2 Ø15×9.5

11

G C G G G G G G G G G ③ ⑨ ④ ① G X8 Ø5×40m C X6 Ø8×30

G X8 Ø5×40mm C X6 Ø8×30

12

Technical diagram of a modular device with numbered components and directional arrow indicating movement or flow.

13 G C ⑨ C C ④ C C ① G ② G G G G G G Ø5×40mm G X6 C X6 Ø8×30

14

Technical line drawing of a rectangular metal enclosure with mounting holes and internal components (no text or symbols)

D | X20 Ø3.5×14mm F | X4

15

E N 9 E E E E X4 N

E	X4	N	X4

16

Line drawing of a wooden cabinet with a square vent and side legs, showing internal compartments and mounting points (no text or symbols)

K X8 Min1000

COMPLETION

Line drawing of a modular electronic device with two compartments and four legs (no text or symbols)

Richtige Entsorgung

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Record Player Cabinet

MODELLO N.: KLEC-03, KLEC-04, KLEC-05

Line drawing of a modular electronic cabinet with two internal compartments and four legs (no text or symbols)

Exploded view diagram of a smartphone showing 10 labeled components for assembly or manufacturing purposes.

A	X10	B	X10	C	X16	D	X20
		∅15×9.5		∅8×30		∅3.5×14mm
E	X4	F	X4	G	X14	H	X2
170mm				∅5×40mm		H1	H2
I	X3	J	X6	K	X8	L	X2
		M6×30mm		M3×14mm
M	X24	N	X4	O	X8+1	P	X2
∅20		∅15		∅3×14mm		∅3.5×14mm
Q	X1
KLEC-03		KLEC-04		KLEC-05

1

A A ①

A X2 Ø6×40mm

2

Isometric technical drawing of a rectangular plate with two labeled points A and a numbered circle (no text or symbols beyond labels)

A X2 Ø6×40mm

3

1 2 3 4

A A ⑥

Technical diagram showing two labeled metal plates (⑤ and ⑥) with mounting holes and a directional arrow indicating movement or force.

B	X2
15 × 9.5
A	X2
6 × 40mm

4

A A ④

A	X2

5

⑤ ⑥ ④ 1 2 3 4 B X2 Ø15×9.5

6

1 2 3 4 ⑤ A C ④ A C ⑧ C X2 Ø8×30 B X2 Ø15×9.5 A X2 Ø6×40mm

C	X2
B	X2
A	X2

7

⑧ Q P P ④

P X2 Ø3.5×14mm Q X1

8

1 2 3 4 5 ① ⑥ ④ C B X2 C Ø15×9.5

B	X2	C	X2

9

J J J J J J I I ⑨

J X6 M0×120mm I X3

10

Technical diagram of a door frame assembly with numbered components and tool icons for assembly steps

B X2 Ø15×9.5

11

G C G G G G G G G G G G ③ ⑨ ④ ① G X8 Ø5×40m C X6 Ø8×30

G X8 Ø5×40mm C X6 Ø8×30

12

Technical diagram of a modular device with numbered components and directional arrow indicating flow or movement.

13 G C ⑨ C C ④ C C ① G ② G G G G G G Ø5×40mm G X6 C X6 Ø8×30

14

Technical line drawing of a rectangular metal enclosure with mounting holes and internal components (no text or symbols)

D | X20 Ø3.5×14mm F | X4

15

Technical diagram of a mechanical housing with labeled components and a small inset showing a cylindrical component with 'E' and 'N' indicators.

E	X4	N	X4

16

Line drawing of a wooden cabinet with a square vent and side legs, showing internal compartments and mounting points (no text or symbols)

K X8 Min1000

COMPLETION

Line drawing of a modular electronic device with two compartments and four legs (no text or symbols)

Importato in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122Australia

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Record Player Cabinet

NÚMERO DE MODELO: KLEC-03, KLEC-04, KLEC-05

Line drawing of a simple electronic device cabinet with four legs and one top shelf (no text or symbols)

Exploded view diagram of a smartphone showing 10 labeled components for assembly or manufacturing purposes.

A	X10	B	X10	C	X16	D	X20
		∅15×9.5		∅8×30		∅3.5×14mm
E	X4	F	X4	G	X14	H	X2
170mm				∅5×40mm		H1	H2
I	X3	J	X6	K	X8	L	X2
		[M6×30mm]		M3×14mm
M	X24	N	X4	O	X8+1	P	X2
∅20		∅15		∅3×14mm		∅3.5×14mm
Q	X1
KLEC-03		KLEC-04		KLEC-05

1

A A ①

A X2 Ø6×40mm

2

Isometric technical drawing of a rectangular plate with two labeled points A and a numbered circle (no text or symbols beyond labels)

A X2 Ø6×40mm

3

1 2 3 4

A A ⑥

Technical diagram showing two labeled components (⑤ and ⑥) mounted on a base plate, with an arrow indicating direction.

B	X2
∅15×9.5
A	X2
∅6×40mm

4

A A ④

A	X2

5

⑤ ⑥ ④ 1 2 3 4 B X2 Ø15×9.5

6

1 2 3 4 ⑤ A C ④ A C ⑧ C X2 Ø8×30 B X2 Ø15×9.5 A X2 Ø6×40mm

C	X2
B	X2
A	X2

7

8 Q P P 4

P X2 Ø3.5×14mm Q X1

8

1 2 3 4 5 6 ① ④ ⑥ ⑤ ① B X2 C X2 Ø15×9.5 Ø8×30

9

J J J J J J I I ⑨

J X6 M0×120mm I X3

10

Technical diagram of a door frame assembly with numbered components and tool icons for assembly steps

B X2 Ø15×9.5

11

G C G G G G G G G G G G ③ ⑨ ④ ① G X8 Ø5×40m C X6 Ø8×30

G X8 Ø5×40mm C X6 Ø8×30

12

Technical diagram of a modular device with numbered components and directional arrow indicating flow or movement.

13 G C ⑨ C C ④ C C ① G ② G G G G G G Ø5×40mm G X6 C X6 Ø8×30

14

Technical line drawing of a rectangular metal enclosure with mounting holes and internal components (no text or symbols)

D | X20 Ø3.5×14mm F | X4

15

Technical diagram of a mechanical housing with labeled components and a small inset showing a cylindrical component with 'E' and 'N' indicators.

E	X4	N	X4

16

Line drawing of a wooden cabinet with a square vent and side legs, showing internal compartments and mounting points (no text or symbols)

K X8 Min1000

COMPLETION

Line drawing of a modular electronic device with two compartments and four legs (no text or symbols)

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

SZAFKA NA GRAMOFON PODREÇZNIK UŻYTKOWNIKA

NR MODELU: KLEC-03, KLEC-04, KLEC-05

Record Player Cabinet

NR MODELU: KLEC-03, KLEC-04, KLEC-05

Line drawing of a simple electronic device cabinet with four legs and one top shelf (no text or symbols)

POTRZEBUJESZ POMOCY? SKONTAKTUJ SIE Z NAMI!

Exploded view diagram of a smartphone showing 10 labeled components for assembly or manufacturing purposes.

A	X10	B	X10	C	X16	D	X20
		∅15×9.5		∅8×30		∅3.5×14mm
E	X4	F	X4	G	X14	H	X2
170mm				∅5×40mm		H1	H2
I	X3	J	X6	K	X8	L	X2
		[CZKW]M6×30mm		M3×14mm
M	X24	N	X4	O	X8+1	P	X2
∅20		∅15		∅3×14mm		[HSTD]∅3.5×14mm
Q	X1
KLEC-03		KLEC-04		KLEC-05

1

A A ①

A X2 Ø6×40mm

2

Isometric technical drawing of a rectangular plate with two labeled points A and a numbered circle (9), showing no text or symbols beyond labels.

A X2 Ø6×40mm

3

1 2 3 4

A A ⑥

Technical diagram showing two labeled components (⑤ and ⑥) mounted on a base plate, with an arrow indicating direction.

B	X2
15 × 9.5
A	X2
6 × 40mm

4

A A ④

A	X2

5

⑤ ⑥ ④ 1 2 3 4 B X2 Ø15×9.5

6

1 2 3 4 ⑤ A C ④ A C ⑧ C X2 Ø8×30 B X2 Ø15×9.5 A X2 Ø6×40mm

C	X2
B	X2
A	X2

7

⑧ Q P P ④

P X2 Ø3.5×14mm Q X1

8

1 2 3 4 5 ① ⑥ ④ C B X2 C Ø15×9.5

B	X2	C	X2

9

J J J J J J I I ⑨

J X6 M0×120mm I X3

10

Technical diagram of a door frame assembly with numbered components and tool icons for assembly steps

B X2 Ø15×9.5

11

G C G G G G G G G G G ③ ⑨ ④ ① G X8 Ø5×40m C X6 Ø8×30

G X8 Ø5×40mm C X6 Ø8×30

12

Technical diagram of a modular device with numbered components and directional arrow indicating flow or movement.

13 G C ⑨ C C ④ C C ① G ② G G G G G G Ø5×40mm G X6 C X6 Ø8×30

14

Technical line drawing of a rectangular metal enclosure with mounting holes and internal components (no text or symbols)

D | X20 Ø3.5×14mm F | X4

15

E N 9 E E E E X4 N

E	X4	N	X4

16

Line drawing of a wooden cabinet with a square vent and side legs, showing internal compartments and mounting points (no text or symbols)

K X8 Min1000

COMPLETION

Line drawing of a modular electronic device with two compartments and four legs (no text or symbols)

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technisch Ondersteuning en e-garantiecertificaat www.vevor.com/support

PLATENSPELER KAST US E R HANDLEIDING

MODELNR.: KLEC-03, KLEC-04, KLEC-05

Exploded view diagram of a smartphone showing 10 labeled components for assembly or manufacturing purposes.

A	X10	B	X10	C	X16	D	X20
		15 × 9.5		8 × 30		3.5 × 14mm
E	X4	F	X4	G	X14	H	X2
170mm				5 × 40mm		H1	H2
I	X3	J	X6	K	X8	L	X2
		M6×30mm		M3×14mm
M	X24	N	X4	O	X8+1	P	X2
20		15		3 × 14mm		3.5 × 14mm
Q	X1
KLEC-03		KLEC-04		KLEC-05

1

A A ①

A X2 Ø6×40mm

2

Isometric line drawing of a rectangular plate with two labeled points A and a numbered circle (no text or symbols beyond labels)

A X2 Ø6×40mm

3

1 2 3 4

A A ⑥

Technical diagram showing two labeled components (⑤ and ⑥) mounted on a base plate, with an arrow indicating direction.

B	X2
15 × 9.5
A	X2
6 × 40mm

4

A A ④

A	X2

5

⑤ ⑥ ④ 1 2 3 4 B X2 Ø15×9.5

6

1 2 3 4 ⑤ A C ④ A C ⑧ C X2 Ø8×30 B X2 Ø15×9.5 A X2 Ø6×40mm

C	X2
B	X2
A	X2

7

8 Q P P 4

P X2 Ø3.5×14mm Q X1

8

1 2 3 4 5 ① ⑥ ④ C B X2 C Ø15×9.5

B	X2	C	X2

9

J J J J J J I I ⑨

J X6 M0×120mm I X3

10

Technical diagram of a door frame assembly with numbered components and tool icons for assembly steps

B X2 Ø15×9.5

11

G C G G G G G G G G G G ③ ⑨ ④ ① G X8 Ø5×40m C X6 Ø8×30

G X8 Ø5×40mm C X6 Ø8×30

12

Technical diagram of a modular device with numbered components and directional arrow indicating flow or movement.

13 G C ⑨ C C ④ C C ① G ② G G G G G G Ø5×40mm G X6 C X6 Ø8×30

14

Technical line drawing of a rectangular metal enclosure with mounting holes and internal components (no text or symbols)

D | X20 Ø3.5×14mm F | X4

15

Technical diagram of a mechanical housing with labeled components and a small inset showing a cylindrical component with 'E' and 'N' indicators.

E	X4	N	X4

16

Line drawing of a wooden cabinet with a square vent and side legs, showing internal compartments and mounting points (no text or symbols)

K X8 Min1000

COMPLETION

Line drawing of a modular electronic device with two compartments and four legs (no text or symbols)

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

Technisch Ondersteuning en e-garantiecertificaat www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

SKIVSPELARESKÅP

A R MANUAL

MODELLNR: KLEC-03, KLEC-04, KLEC-05

Record Player Cabinet

MODELLNR: KLEC-03, KLEC-04, KLEC-05

Line drawing of a modular electronic cabinet with two compartments and four legs (no text or symbols)

BEHÖVER HJÄLP? KONTAKTA OSS!

Exploded view diagram of a smartphone showing 10 labeled components for assembly or manufacturing purposes.

A	X10	B	X10	C	X16	D	X20
		∅15×9.5		∅8×30		∅3.5×14mm
E	X4	F	X4	G	X14	H	X2
170mm				∅5×40mm		H1	H2
I	X3	J	X6	K	X8	L	X2
		[DAV6]M6×30mm		M3×14mm
M	X24	N	X4	O	X8+1	P	X2
∅20		∅15		∅3×14mm		[OTH7]∅3.5×14mm
Q	X1
KLEC-03		KLEC-04		KLEC-05

1

A A ①

A X2 Ø6×40mm

2

Isometric technical drawing of a rectangular plate with two labeled points A and a numbered circle (9), showing no text or symbols beyond labels.

A X2 Ø6×40mm

3

1 2 3 4

A A ⑥

Technical diagram showing two labeled components (⑤ and ⑥) mounted on a base plate, with an arrow indicating direction.

B	X2
∅15×9.5
A	X2
∅6×40mm

4

A A ④

A	X2

5

⑤ ⑥ ④ 1 2 3 4 B X2 Ø15×9.5

6

1 2 3 4 ⑤ A C ④ A C ⑧ C X2 Ø8×30 B X2 Ø15×9.5 A X2 Ø6×40mm

C	X2
B	X2
A	X2

7

8 Q P P 4

P X2 Ø3.5×14mm Q X1

8

1 2 3 4 5 6 ① ④ ⑥ ⑤ ① B X2 C X2 Ø15×9.5 Ø8×30

9

J J J J J J I I ⑨

J X6 M0×120mm I X3

10

Technical diagram of a door frame assembly with numbered parts and tool icons for assembly steps

B X2 Ø15×9.5

11

G C G G G G G G G G G ③ ⑨ ④ ① G X8 Ø5×40m C X6 Ø8×30

G X8 Ø5×40mm C X6 Ø8×30

12

Technical diagram of a modular device with numbered components and directional arrow indicating movement or flow.

13 G C ⑨ C C ④ C C ① G ② G G G G G G Ø5×40mm G X6 C X6 Ø8×30

14

Technical line drawing of a rectangular metal enclosure with mounting holes and internal components (no text or symbols)

D | X20 Ø3.5×14mm F | X4

15

E N 9 E E E E X4 N

E	X4	N	X4

16

Line drawing of a wooden cabinet with a square vent and side legs, showing internal compartments and mounting points (no text or symbols)

K X8 Min1000

COMPLETION

Line drawing of a modular electronic device with two compartments and four legs (no text or symbols)

Korrekt avfallshantering

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.