KLEC-01 - Wardrobe Vevor - Free user manual and instructions

USER MANUAL KLEC-01 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

RECORD PLAYER CABINET USER MANUAL

MODEL NO.: KLEC-01

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to co all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually Saving Half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

Record Player Cabinet

MODEL NO.: KLEC-01

Line drawing of a simple modular furniture cabinet with four legs and one lid (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of o user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you ag there are any technology or software updates on our product.

WARNING:

Please read this manual carefully before using the product. Failure do so may result in serious injury.

ASSEMBLY PRECAUTIONS

1. Assemble only according to these instructions. Improper assembly c create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
3. Keep the assembly area clean and well-lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or when under the influence of alcohol drugs or medication.
6. The product capabilities apply to properly and completely assembled products only.
7. Assemble on a flat, level, hard and smooth surface capable of sa supporting the Record Player Cabinet.
8. For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unwrap separate all parts in a clean work area.

SAVE THESE INSTRUCTIONS

USE PRECAUTIONS

TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:

1. This product is not a toy Do not allow children to play with or r item.
2. Do not exceed weight capacities, before moving.
3. Use only on a flat, hard and smooth surface capable of safely supporting a fully loaded Record Player Cabinet.
4. Use as intended only.

Inspect before every use; do not use if parts are loose or damaged.

TECHNICAL SPECIFICATIONS

Model	KLEC-01
Product Dimensions (LxWxH)(mm)	660*352*685
Net Weight(kg)	About 11.6

*Products such as specifications, appearance, and design are subject to modification without prior notice.

Exploded view diagram of a tablet device with numbered compartments for identification

A	X4	B	X4	C	X10	D	X20
∅6×40mm		∅15×9.5		∅8×40		∅3.5×14mm
E	X4	F	X4	G	X8	H	X4
305mm				∅5×40mm		∅5
I	X2	J	X4	K	X6	L	X1
		[BYD]M8×30mm		M3×14mm
M	X12	N	X4
∅20		∅15

ASSEMBLY STEPS

1

A ① A

A	X2

2

A A ②

A	X2

3

Technical diagram showing two labeled panels (② and ⑤) with screwdrivers and a central component marked 'C'.

Diagram showing four steps of a tool or device operation: first, second, third, and final with a tool and mechanical component.

B	X2
∅15×9.5
∅8×40

∅15×9.5
∅8×40

4

1 2 3 4

J J J J ② I I

J	X4

10×38mm

5

Technical diagram of a door frame assembly with labeled components and four close-up insets showing tool tips and tools.

B	X2
15 × 9.5
C	X1
8 × 40

∅15×9.5
C X1
∅8×40

6

Technical diagram of a mechanical device with numbered components and directional arrows indicating flow or movement.

7 G C G G G ④ C C G G ⑦ ① C X8 Ø8×40 G X8 Ø5×40mm

8

D D D F D ②

D	X20
[BK82]∅3.5×14mm
F	X4

∅3.5×14mm

9

E E E ②

E	X4
[ST64]
(127)	X4
∅15

∅15

10

Technical line drawing of a small cabinet with numbered components and an inset showing a door labeled 'K'

K	X6

MORI

11

① ④ ⑤ H H

H	X4

12

Line drawing of a simple modular furniture cabinet with legs and a side table, no text or symbols present

13 M X12 Ø20 14 WALL L L ① L X1 M6×30 Ø4+35nm Ø3.5+14mm

COMPLETION

Line drawing of a modern open bookshelf with four legs and one front panel (no text or symbols)

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Record Player Cabinet

N° DE MODÈLE : KLEC-01

Line drawing of a simple modular furniture cabinet with four legs and one lid (no text or symbols)

BESOIN D'AIDE ? CONTACTEZ-NOUS!

Technical diagram showing eight labeled components of a device or panel assembly, with numbered annotations for each part.

A	X4	B	X4	C	X10	D	X20
∅6×40mm		∅15×9.5		∅8×40		∅3.5×14mm
E	X4	F	X4	G	X8	H	X4
305mm				∅5×40mm		∅5
I	X2	J	X4	K	X6	L	X1
		M6×30mm		M3×14mm
M	X12	N	X4
∅20		∅15

ASSEMBLY STEPS

1

A ① A

A	X2

2

A A ②

A	X2

3

Technical diagram showing two labeled panels (② and ⑤) with screwdrivers and a central component marked 'C'.

Diagram showing four steps of a tool or device operation: first, second, third, and final with a tool and mechanical component.

B	X2
15 × 9.5
C	X1
8 × 40

∅15×9.5
C X1
∅8×40

4

Diagram showing four steps of a tool or device operation: first, second, third, and final with labeled parts.

J J J J ② I I

J	X4
[X2A0]WY*381(N)
I	X2

10×38mm
I X2

5

Technical diagram of a door frame assembly with labeled components and four close-up insets showing tool tips.

B	X2
15 × 9.5
C	X1
8 × 40

∅15×9.5
C X1
∅8×40

6

Technical diagram of a mechanical device with numbered components and directional arrows indicating flow or movement.

7 G C G G G ④ C C G G ⑦ ① C X8 Ø8×40 G X8 Ø5×40mm

8

D D D F D ②

D	X20
F	X4

9

E E E ②

E	X4
(ZNH5)
###	X4
###∅15

∅15

10

Technical line drawing of a small cabinet with numbered components and an inset showing a door labeled 'K'

K	X6

MORI

11

① ④ ⑤ H H

H	X4

12

Line drawing of a simple modular furniture cabinet with legs and a side table, no text or symbols present

13 M X12 Ø20 14 WALL L L ① L X1 M6×30 Ø4+35nm Ø3.5+14mm

COMPLETION

Line drawing of a modern open bookshelf with four legs and one front panel (no text or symbols)

Fabricant : Shanghaimuxinmuyeyouxiangongsi

Adresse : Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai 200 000 CN.

Importé en Australie : SIHAO PTY LTD. 1 RUE ROKEVAASTWOOD NSW 2122 Australie

Lieu, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

Record Player Cabinet

MODELL NR.: KLEC-01

Line drawing of a modern side table with four legs and one front shelf (no text or symbols)

Technical diagram showing eight labeled components of a device or panel assembly, with numbered annotations for each part.

A	X4	B	X4	C	X10	D	X20
∅6×40mm		∅15×9.5		[0628]∅8×40		[cW4Y]∅3.5×14mm
E	X4	F	X4	G	X8	H	X4
305mm				∅5×40mm		∅5
I	X2	J	X4	K	X6	L	X1
		[6cXD]M6×30mm		M3×14mm
M	X12	N	X4
∅20		∅15

ASSEMBLY STEPS

1

A ① A

A	X2

2

A A ②

A	X2

3

Technical diagram showing two labeled panels (② and ⑤) with screwdrivers and a central component marked 'C'.

Diagram showing four steps of a tool or device operation: first, second, third, and final with a tool and mechanical component.

B	X2
15 × 9.5
C	X1
8 × 40

∅15×9.5
C X1
∅8×40

4

Diagram showing four steps of a tool or device operation: first, second, third, and final with labeled parts.

J J J J ② I I

J	X4
I	X2

10×38mm
I X2

5

Technical diagram of a door frame assembly with labeled components and four close-up insets showing tool tips.

B	X2
15 × 9.5
C	X1
8 × 40

∅15×9.5
C X1
∅8×40

6

Technical diagram of a mechanical device with numbered components and directional arrows indicating flow or movement.

7 G C G G G ④ C C G G ⑦ ① C X8 Ø8×40 G X8 Ø5×40mm

8

D D D F D ②

D	X20
∅3.5×14mm
F	X4
[KHT]

∅3.5×14mm

9

E E E ②

E	X4
###	X4
∅15

∅15

10

Technical line drawing of a small cabinet with numbered components and an inset showing a door labeled 'K'

K	X6

MORI

11

① ④ ⑤ H H

H	X4

12

Line drawing of a simple modular furniture cabinet with legs and a side table, no text or symbols present

13 M X12 Ø20 14 WALL L L ① L X1 M6×30 Ø4+35nm Ø3.5+14mm

COMPLETION

Line drawing of a modern open bookshelf with four legs and one front panel (no text or symbols)

Hersteller: Shanghaimuxinmuyeyouxiangongsi

Adresse: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai, 200.000 CN.

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Record Player Cabinet

MODELLO N.: KLEC-01

Line drawing of a modern side table with four legs and one front shelf (no text or symbols)

Exploded view diagram of a multi-layered electronic device with numbered components for assembly or manufacturing purposes.

A	X4	B	X4	C	X10	D	X20
∅6×40mm		∅15×9.5		∅8×40		∅3.5×14mm
E	X4	F	X4	G	X8	H	X4
305mm				∅5×40mm		∅5
I	X2	J	X4	K	X6	L	X1
		[xWYQ]M6×30mm		M3×14mm
M	X12	N	X4
∅20		∅15

ASSEMBLY STEPS

1

A ① A

A	X2

2

A A ②

A	X2

3

Technical diagram showing two labeled panels (② and ⑤) with screwdrivers and a central component marked 'C'.

Diagram showing four steps of a tool or device operation: first, second, third, and final with a tool and mechanical component.

B	X2
15 × 9.5
8 × 40

∅15×9.5
∅8×40

4

1 2 3 4

J J J J ② I I

J	X4
(Z2KK)
(80*381H)

10×38mm

5

Technical diagram of a door frame assembly with labeled components and four close-up insets showing tool tips and tools.

Technical diagram of a mechanical device with numbered components and directional arrows indicating flow or movement.

7 G C G G G ④ C C G G ⑦ ① C X8 Ø8×40 G X8 Ø5×40mm

8

D D D F D ②

D	X20
∅3.5×14mm
F	X4
[4032]

∅3.5×14mm

9

E E E ②

E	X4
[GCK7]
TAL20	X4
∅15

∅15

10

Technical line drawing of a small cabinet with numbered components and an inset showing a door labeled 'K'

K	X6

MORI

11

① ④ ⑤ H H

H	X4

12

Line drawing of a simple modular furniture box with legs and a side panel, no text or symbols present

13 M X12 Ø20 14 WALL L L ① L X1 M6×30 Ø4+35nm Ø3.5+14mm

COMPLETION

Line drawing of a modern open bookshelf with four legs and one front panel (no text or symbols)

Importato in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122Australia

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Record Player Cabinet

NÚMERO DE MODELO: KLEC-01

Line drawing of a modern office chair with four legs and one front shelf (no text or symbols)

Exploded view diagram of a multi-layered electronic device with numbered components for assembly or manufacturing purposes.

A	X4	B	X4	C	X10	D	X20
∅6×40mm		∅15×9.5		∅8×40		∅3.5×14mm
E	X4	F	X4	G	X8	H	X4
305mm				∅5×40mm		∅5
I	X2	J	X4	K	X6	L	X1
		M6×30mm		M3×14mm
M	X12	N	X4
∅20		∅15

ASSEMBLY STEPS

1

A ① A

A	X2

2

A A ②

A	X2

3

Technical diagram showing two labeled panels (② and ⑤) with screwdrivers and a central component marked 'C'.

Diagram showing four steps of a tool or device operation: first, second, third, and final with a tool and mechanical component.

B	X2
15 × 9.5
8 × 40

∅15×9.5
∅8×40

4

1 2 3 4

J J J J ② I I

J	X4
[ICWA]

10×38mm

5

Technical diagram of a door frame assembly with labeled components and four close-up insets showing tool tips and tools.

B	X2
15 × 9.5
C	X1
8 × 40

∅15×9.5
C X1
∅8×40

6

Technical diagram of a mechanical device with numbered components and directional arrows indicating flow or movement.

7 G C G G G ④ C C G G ⑦ ① C X8 Ø8×40 G X8 Ø5×40mm

8

D D D F D ②

D	X20
∅3.5×14mm
F	X4

∅3.5×14mm

9

E E E ②

E	X4
###	X4
∅15

∅15

10

Technical line drawing of a small cabinet with numbered components and an inset showing a door labeled 'K'

K	X6

MORI

11

① ④ ⑤ H H

H	X4

12

Line drawing of a simple modular furniture cabinet with legs and a side table, no text or symbols present

13 M X12 Ø20 14 WALL L L ① L X1 M6×30 Ø4+35nm Ø3.5+14mm

COMPLETION

Line drawing of a modern open bookshelf with four legs and one front panel (no text or symbols)

Fabricante: Shanghaimuxinmuyeyouxiangongsi

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

SZAFKA NA GRAMOFON PODREÇZNIK UŻYTKOWNIKA

NR MODELU: KLEC-01

Record Player Cabinet

NR MODELU: KLEC-01

Line drawing of a modern office chair with four legs and one front shelf (no text or symbols)

POTRZEBUJESZ POMOCY? SKONTAKTUJ SIE Z NAMI!

Exploded view diagram of a multi-layered electronic device with numbered components for assembly or manufacturing purposes.

A	X4	B	X4	C	X10	D	X20
∅6×40mm		∅15×9.5		∅8×40		∅3.5×14mm
E	X4	F	X4	G	X8	H	X4
305mm				∅5×40mm		∅5
I	X2	J	X4	K	X6	L	X1
		M6×30mm		M3×14mm
M	X12	N	X4
∅20		∅15

ASSEMBLY STEPS

1

A ① A

A	X2

2

A A ②

A	X2

3

Technical diagram showing two labeled panels (② and ⑤) with screwdrivers and a central component marked 'C'.

Diagram showing four steps of a tool or device operation: first, second, third, and final with a tool and mechanical component.

B	X2
∅15×9.5
∅8×40

∅15×9.5
∅8×40

4

1 2 3 4

J J J J ② I I

J	X4

10×38mm

5

Technical diagram of a door frame assembly with labeled components and four close-up insets showing tool tips and tools.

B	X2
15 × 9.5
C	X1
8 × 40

∅15×9.5
C X1
∅8×40

6

Technical diagram of a mechanical device with numbered components and directional arrows indicating flow or movement.

7 G C G G G ④ C C G G ⑦ ① C X8 Ø8×40 G X8 Ø5×40mm

8

D D D F D ②

D	X20
[05K4]∅3.5×14mm
F	X4
[C30H]

∅3.5×14mm

9

E E E ②

E	X4
[3Y×2]
mm	X4
∅15

∅15

10

Technical line drawing of a cabinet with numbered components and an inset showing a door labeled 'K'

K	X6

MORI

11

① ④ ⑤ H H

H	X4

12

Line drawing of a simple modular furniture cabinet with legs and a side table, no text or symbols present

13 M X12 Ø20 14 WALL L L ① L X1 M6×30 Ø4+35nm Ø3.5+14mm

COMPLETION

Line drawing of a modern open bookshelf with four legs and one front panel (no text or symbols)

Producent: Shanghaimuxinmuyeyouxiangongsi

Adres: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Szanghaj 200000 CN.

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

PLATENSPELER KAST

US E R HANDLEIDING

MODELNR.: KLEC-01

Record Player Cabinet

MODEL NR.: KLEC-01

Line drawing of a simple modular furniture cabinet with four legs and one lid (no text or symbols)

HULP NODIG? NEEM CONTACT MET ONS OP!

Exploded view diagram of a multi-layered electronic device with numbered components for assembly or manufacturing purposes.

A	X4	B	X4	C	X10	D	X20
∅6×40mm		∅15×9.5		∅8×40		∅3.5×14mm
E	X4	F	X4	G	X8	H	X4
305mm				∅5×40mm		∅5
I	X2	J	X4	K	X6	L	X1
		M6×30mm		M3×14mm
M	X12	N	X4
∅20		∅15

ASSEMBLY STEPS

1

A ① A

A	X2

2

A A ②

A	X2

3

Technical diagram showing two labeled panels (② and ⑤) with screwdrivers and a central component marked 'C'.

Diagram showing four steps of a tool or device operation: first, second, third, and final with a tool and mechanical component.

B	X2
∅15×9.5
∅8×40

∅15×9.5
∅8×40

4

1 2 3 4

J J J J ② I I

J	X4
[2732]

10×38mm

5

Technical diagram of a door frame assembly with labeled components and four close-up insets showing tool tips and tools.

Technical diagram of a mechanical device with numbered components and directional arrows indicating flow or movement.

7 G C G G G ④ C C G G ⑦ ① C X8 Ø8×40 G X8 Ø5×40mm

8

D D D F D ②

D	X20
3.5 × 14mm
F	X4

∅3.5×14mm

9

E E E ②

E	X4
[40AX]
∅15

∅15

10

Technical line drawing of a cabinet with numbered components and an inset showing a door labeled 'K'

K	X6

B2×14000

11

① ④ ⑤ H H

H	X4

12

Line drawing of a simple modular furniture cabinet with legs and a side panel, no text or symbols present

13 M X12 Ø20 14 WALL L L ① L X1 M6×30 Ø4+35nm Ø3.5+14mm

COMPLETION

Line drawing of a modern open bookshelf with four legs and one front panel (no text or symbols)

Fabrikant: Shanghaimuxinmuyeyouxiangongsi

Adres: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai 200.000 CN.

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Record Player Cabinet

MODELLNR: KLEC-01

Line drawing of a modern side table with four legs and one front shelf (no text or symbols)

BEHÖVER HJÄLP? KONTAKTA OSS!

Exploded view diagram of a multi-layered electronic device with numbered components for assembly or manufacturing purposes.

A	X4	B	X4	C	X10	D	X20
∅6×40mm		∅15×9.5		∅8×40		∅3.5×14mm
E	X4	F	X4	G	X8	H	X4
305mm				∅5×40mm		∅5
I	X2	J	X4	K	X6	L	X1
		[888V]M8×30mm		M3×14mm
M	X12	N	X4
∅20		∅15

ASSEMBLY STEPS

1

A ① A

A	X2

2

A A ②

A	X2

3

Technical diagram showing two labeled panels (② and ⑤) with screwdrivers and a central component marked 'C'.

Diagram showing four steps of a tool or device operation: first, second, third, and final with a tool and mechanical component.

B	X2
15 × 9.5
8 × 40

∅15×9.5
∅8×40

4

1 2 3 4

J J J J ② I I

J	X4
[IMAGE]

10×38mm

5

Technical diagram of a door frame assembly with labeled components and four close-up insets showing tool tips and tools.

Technical diagram of a mechanical device with numbered components and directional arrows indicating flow or movement.

7 G C G G G ④ C C G G ⑦ ① C X8 Ø8×40 G X8 Ø5×40mm

8

D D D F D ②

D	X20
∅3.5×14mm
F	X4
[688C]

∅3.5×14mm

9

E E E ②

E	X4
[OWXX]
###	X4
∅15

∅15

10

Technical line drawing of a small cabinet with numbered components and an inset showing a door labeled 'K'

K	X6

MORI

11

① ④ ⑤ H H

H	X4

12

Line drawing of a simple modular furniture box with legs and a side panel, no text or symbols present

13 M X12 Ø20 14 WALL L L ① L X1 M6×30 Ø4+35nm Ø3.5+14mm

COMPLETION

Line drawing of a modern open bookshelf with four legs and one front panel (no text or symbols)

Tillverkare: Shanghaimuxinmuyeyouxiangongsi

Adress: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200 000 CN.

Importerad till AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOC NSW 2122 Australien

Importerad till USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support