HZR001 - Storage furniture Vevor - Free user manual and instructions

Product Type	Shoe Cabinet
Brand	Vevor
Model	HZR001
Package Dimensions	885 x 465 x 143 mm
Assembled Product Dimensions	600 x 168 x 877 mm
Color	Natural Wood
Number of Shelves	2 tiers
Material	Particle Board
Base Type	4 Individual Legs
Maximum Load Capacity	≥ 80 lbs (approximately 36 kg)
Assembly Required	Yes, with instructions included
Intended Use	Shoe storage indoors
Safety Precautions	Do not sit or stand; use on a flat, stable surface
Cleaning	Wipe with a damp cloth; avoid abrasive products
Spare Parts	Available upon request via customer service
Repairability	Legs and shelves can be replaced
Contact Information	[e-mail]

Frequently Asked Questions - HZR001 Vevor

How many shoes can this cabinet hold?

The Vevor HZR001 shoe cabinet has 2 shelves and can hold approximately 4 to 6 pairs of shoes depending on size.

What is the maximum weight per shelf?

The total capacity is at least 80 lbs (36 kg), distributed across the two shelves. It is recommended not to exceed 40 lbs (18 kg) per shelf.

Is the cabinet easy to assemble?

Yes, assembly is simple thanks to the illustrated instructions. Allow about 30 minutes and basic tools (screwdriver).

Can I use this cabinet for something other than shoes?

This cabinet is designed for shoes, but can also serve as storage for small light items. Do not exceed the load capacity.

How do I clean the cabinet?

Wipe with a damp cloth and mild soap. Dry immediately. Avoid abrasive cleaners or standing water.

Is the cabinet stable on an uneven floor?

It is recommended to place the cabinet on a flat, hard surface. The individual legs can be slightly adjusted if needed.

What if a part is missing or damaged?

Contact customer service at [e-mail] for replacement parts under warranty.

Is this cabinet under warranty?

Yes, Vevor offers an electronic warranty certificate. Register your product at www.vevor.com/support.

Can I attach the cabinet to the wall?

The manual does not mention a wall mounting kit. For safety reasons, especially around children, it is advisable to secure it to the wall.

Does the cabinet have a glue or paint smell?

Like any new furniture, it may have a slight odor. Air out the room for a few days after assembly.

USER MANUAL HZR001 Vevor

TechnicalSupportandE-WarrantyCertificatewww.vevor.com/support

SHOECABINET

USERMANUAL

MODEL:HZR001

Wecontinuetobecommittedtoprovideyoutoolswithcompetitiveprice. "SaveHalf", "HalfPrice"oranyothersimilarexpressionsusedbyusonlyrepresentsan estimateofsavingsyoumightbenefitfrombuyingcertaintoolswithuscomparedtothemajor topbrandsanddoesnotnecessarilymeantocoverallcategoriesoftoolsofferedbyus.You arekindlyremindedtoverifycarefullywhenyouareplacinganorderwithusifyouare actuallysavinghalfincomparisonwiththeto pmajorbrands.

VEVOR®

TOUGH TOOLS, HALF PRICE

SHOECABINET

MODEL:HZR001

Line drawing of a modern cabinet with two doors and a patterned lid (no text or symbols)

NEEDHELP?CONTACTUS!

Haveproductquestions?Needtechnicalsupport?Pleasefeelfreeto contactus:

[e-mail]

Thisistheoriginalinstruction,pleasereadallmanualinstructions carefullybeforeoperating.VEVORreservesaclearinterpretationofour usermanual.Theappearanceoftheproductshallbesubjecttothe productyoureceived.Pleaseforgiveusthatwewon'tinformyouagainif thereareanytechnologyorsoftwareupdatesonourproduct.

SAFETYINSTRUCTIONS

WARNING:

Readthisinstructionscarefullybeforeusingthisproduct.Failuretodoso canresultinserious injury.

Assembly precautions

1. Assembleonlyshouldbeaccordingtotheseinstructions.Improper assemblycanresultinhazards.
2. WearANSI-approved safety goggles and heavy-duty work gloves during assembly.
3. Keep the assembly are aclean and well-lit.
4. Keep bystanders out of the areaduring assembly.
5. Donotassemblewhentiredorun dertheinfluenceofalcohol, drugsor medication.
6. The product capabilities apply to properly and completely assembled product only.
7. Assembleonaflat, level, hardandsmoothsurfacecapable of safely supporting the shoecabinet.
8. For additional information regarding the parts listed in the following pages, pleaserefertotheAssemblyDiagramofthismanual.Unwrap and separate all parts in a clean work area.

Use precautions

1. DONOTSITORSTANDONTHISITEM.
2. Thisproductisnotatoy.Donotallowchildrentoplaywithornearthis item.
3. Donotexceedweightcapacities.
4. Useonlyonaflat, level, hardandsmoothsurfacecapable of safely supporting a fully loaded shoecabinet.
5. Useasintendedonly.
6. Inspectbeforeeveryuse; donotuseifpartsarelooseordamaged.

SAVETHESEINSTRUCTIONS

PARTS LIST

ASSEMBLYSTEP

1

	C x 4PCS
	D x 4PCS
	E x 4PCS

2

Isometric technical drawing of a mechanical assembly with two labeled components (G) and numbered circle (9), no text or symbols present.

G x 2PCS

3

Isometric technical drawing of a mechanical assembly with labeled components (no text or symbols beyond numbers)

4

F x 2PCS
5

6

F x 4PCS

7
		G x 2PCS
8
9
		F x 2PCS

10

11

F x 4PCS

12

graph LR
    A["Cell with A injection"] --> B["Morphological change"]
    B --> C["Product with A and M"]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#cfc,stroke:#333

	A x 12PCS
	M x 12PCS

13

16

17

20

P x 6PCS

21

	H x 4PCS
	I x 2PCS

22

	K×2PCS
	Q×2PCS

23

24

R x 2PCS

PRODUCT PARAMETER

Packagesize (mm) 885*465*143
Size (mm) 600*168*877
ColourNaturalwood
Type2layers
TextureChipboard
Base4Individuallegs
Load-bearing≥80lbs

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH.

Mainzer Landstr.69, 60329 Frankfurt am Main.

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

TechnicalSupportandE-WarrantyCertificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Line drawing of a modern cabinet with two doors and a patterned lid (no text or symbols)

BESOIN D'AIDE? CONTACTEZ-NOUS!

ÉTAPE D'ASSEMBLAGE

1

	C x 4PCS
	D x 4PCS
	E x 4PCS

2

Isometric technical drawing of a mechanical assembly with two labeled components (G) and numbered circle (9), no text or symbols present.

G x 2PCS

3

Isometric technical drawing of a mechanical assembly with labeled components (no text or symbols beyond numbers)

4

F x 2 pièces
5

6

F x 4 pièces

7

Isometric technical drawing of a mechanical assembly with two labeled components (G) and numbered circle (8), no text or symbols present.

G x 2 pièces

8

Isometric technical drawing of a mechanical assembly with labeled components (8 and 11), no readable text or symbols beyond labels

9

F x 2 pièces

12

P x 6 pièces

21

C/O YH Consulting Limited Bureau 147, Centurion House, Route de Londres, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Line drawing of a two-tier cabinet with open doors and a patterned front panel (no text or symbols)

[e-mail]

MONTAGESTRITT

1

	C x 4PCS
	D x 4PCS
	E x 4PCS

2

Isometric technical drawing of two triangular structural components labeled G, mounted on a flat base plate (no text or symbols present)

G x 2PCS

3

Isometric technical drawing of a mechanical assembly with labeled components (no text or symbols beyond numbers)

4

F x 2 STK
5

6

F x 4 STK

7

Isometric technical drawing of a mechanical assembly with two labeled components (G) and numbered circle (8), no text or symbols present.

G x 2 STK

8

Isometric technical drawing of a mechanical assembly with labeled components (8 and 11), no readable text or symbols beyond labels

9

F x 2 STK

12

	Eine x 12 STK
	M x 12 STK

13

P x 6 STK

21

24

R x 2 STK

PRODUKTPARAMETER

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Line drawing of a modern cabinet with two doors and a patterned lid (no text or symbols)

	C x 4PCS
	D x 4PCS
	E x 4PCS

2

Isometric technical drawing of two triangular structural components labeled G, mounted on a flat base plate (no text or symbols present)

G x 2PCS

3

Isometric technical drawing of a mechanical assembly with labeled components (no text or symbols beyond numbers)

4

F x 2 PZ

5

6

F x 4 PZ

7

Isometric technical drawing of a mechanical assembly with two labeled components (G) and numbered circle (8), no text or symbols present.

G x 2 PZ

8

Isometric technical drawing of a mechanical assembly with labeled components (8 and 11), no readable text or symbols beyond labels

9

F x 2 PZ

F x 4 PZ

12

graph LR
    A["Cell Fusion"] --> B["Cell Fusion"]
    B --> C["Final State"]

    subgraph Stage1
        A1["Cell Fusion: A, x12"]
    end

    subgraph Stage2
        M1["M, x12"]
        M2["M, x12"]
    end

    subgraph FinalStage
        M3["M, x12"]
        M4["M, x12"]
        M5["A, x12"]
    end

	Un x 12 PZ
	M x 12 PZ

13

P x 6 PZ

21

	H×4 PZ
	1×2 PZ

22

	K×2 PZ
	Q×2 PZ

23

24

R x 2 PZ

PARAMETRO PRODOTTO

Importato in AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD

Nuovo Galles del Sud 2122 Australia

elettronica www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Line drawing of a two-tiered cabinet with open doors and a patterned front panel (no text or symbols)

PASO DE MONTAJE

1

	C x 4PCS
	D x 4PCS
	E x 4PCS

2

Isometric technical drawing of a mechanical assembly with two labeled components (G) and numbered circle (9), no text or symbols present.

G x 2PCS

3

Isometric technical drawing of a mechanical assembly with labeled components (no text or symbols beyond numbers)

4

Fx2 piezas
5

6

Fx4 piezas

7

Isometric technical drawing of a mechanical assembly with two labeled components (G) and numbered circle (8), no text or symbols present.

G x 2 piezas

8

Isometric technical drawing of a mechanical assembly with labeled components (8 and 11), no readable text or symbols beyond labels

9

Fx2 piezas

12

Paquete de 6 piezas

21

C/O YH Consulting Limited Oficina 147, Centurion House,

Carretera de Londres, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Line drawing of a modern cabinet with two doors and a patterned lid (no text or symbols)

POTRZEBUJESZ POMOCY? SKONTAKTUJ SIĘ Z NAMI!

	C x 4PCS
	D x 4PCS
	E x 4PCS

2

Isometric technical drawing of two triangular structural components labeled G, mounted on a flat base plate (no text or symbols present)

G x 2PCS

3

Isometric technical drawing of a mechanical assembly with labeled components (no text or symbols beyond numbers)

4

F x 2 SZT.

5

6

F x 4 SZT.

7

Isometric technical drawing of a mechanical assembly with two labeled components (G) and numbered circle (8), no text or symbols present.

G x 2 SZT.

8

Isometric technical drawing of a mechanical assembly with labeled components (8 and 11), no readable text or symbols beyond labels

9

F x 2 SZT.

12

	A x 12 SZT.
	M x 12 SZT.

13

P x 6 SZT.

21

24

R x 2 SZT.

PARAMETR PRODUKTU

Importowane do AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

C/O YH Consulting Limited Biuro 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Line drawing of a modern cabinet with two doors and a patterned lid (no text or symbols)

HULP NODIG? NEEM CONTACT MET ONS OP!

[e-mail]

				5x35mm	4x30mm	12x19mm	3,5x14mm			4x18mm 96 mm6x30mm4x40mm
		B	12+1STUKS C	4STUKS D	4STUKS E	4STUKS F	12+1STUK$ G	4STUKS H	4STUKS I	2STUKSEen 20+2PCS
4x12mm		3x14mm			12mm	20mm	6x35mm	15x9mm		[CKZ]
J	6+2STUKS	K	2STUKS L	4STUKS M	12+1STUKS N	4STUKS O	6STUKS P	6STUKS Q			R 2STUKS4 STUKS
6x30mm		4x62mm
S	2PCS	T	1 STUK

MONTAGESTAP

1

	C x 4PCS
	D x 4PCS
	E x 4PCS

2

Isometric technical drawing of a mechanical assembly with two labeled components (G) and numbered circle (9), no text or symbols present.

G x 2PCS

3

Isometric technical drawing of a mechanical assembly with labeled components (no text or symbols beyond numbers)

4

F x 2 STUKS
5

6

Technical line drawing of a mechanical bracket assembly with force indicators (F), no text or symbols present

F x 4 STUKS

7

Isometric technical drawing of a mechanical assembly with two labeled components (G) and numbered circle (8), no text or symbols present.

G x 2STUKS

8

Isometric technical drawing of a mechanical assembly with labeled components (8 and 11), no readable text or symbols beyond labels

9

F x 2 STUKS

12

P x 6STUKS

21

C/O YH Consulting Limited Kantoor 147, Centurion House, Londen Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

garantiecertificaat www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Line drawing of a two-tier cabinet with open doors and a patterned front panel (no text or symbols)

BEHÖVER HJÄLP? KONTAKTA OSS!

MONTERINGSTEG

1

	C x 4PCS
	D x 4PCS
[48x4]	E x 4PCS

2

Isometric technical drawing of two triangular structural components labeled G, mounted on a flat base plate (no text or symbols present)

G x 2PCS

3

Isometric technical drawing of a mechanical assembly with labeled components (no text or symbols beyond numbers)

4

F x 2 st
5

6

F x 4 st

7

Isometric technical drawing of a mechanical assembly with two labeled components (G) and numbered circle (8), no text or symbols present.

G x 2 st

8

Isometric technical drawing of a mechanical assembly with labeled components (8 and 11), no readable text or symbols beyond labels

9

F x 2 st

12

	A x 12 st
	M x 12 st

13

P x 6 st

21

	H x 4 st
	I x 2st

22

	K x 2 st
	Q x 2st

23

24

R x 2 st

PRODUKTPARAMETER

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support