XYFG-03 - Storage furniture Vevor - Free user manual and instructions

USER MANUAL XYFG-03 Vevor

Affordable. Reliable. Home Improvement.

LAUNDRY ROOM CABINETS

MODEL:XYFG-03

Technical Support and E-Warranty Certificate

www.vevor.com/support

MODEL:XYFG-03

Line drawing of a rectangular cabinet with two doors and a handle (no text or symbols)

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of o user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you ag there are any technology or software updates on our product.

WARNING:

Read this material before using this product. Failure to do so may result in serious injury.

Assembly precautions

1. Assemble only according to these instructions. Improper assembly may create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
3. Keep the assembly area clean and well-lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble if tired or when under the influence of alcohol, or medication.
6. The product capabilities apply to properly and completely assembled products only.
7. Assemble on a flat, level, hard and smooth surface capable of sa supporting the Laundry Room Cabinets.
8. If possible, you can use power tools to make assembly easier.
9. For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unw and separate all parts in a clean work area.
10. It is recommended that the Laundry Room Cabinets be installed on load-bearing wall.

Use precautions

1. Do not exceed specified weight capacities.
2. Use only on a flat, level, hard, and smooth surface that can safe support a fully loaded Laundry Room Cabinets.
3. Use as intended only.
4. Inspect before every use; do not use if parts are loose or damage
5. If there is a gap in the cabinet door, it can be eliminated by ad the hinge, refer to step 12 of the assembly instructions.

SAVE THIS MANUAL

PARTS LIST

A×12	B×8	C×4	E×4	F×2
Φ3.5*12	Φ3.5*30	[1]
G×16	H×4	I×2	J×4	K×1
L×12
Spare Parts
A×2	B×2

Diagram showing eight numbered components arranged in a 3D layout, likely illustrating a mechanical or architectural assembly.

1890x390x12 1 PC	2890x390x12 1 PC	3610x391x12 1 PC
4610x391x12 1 PC	5888x344x12 1 PC	6890x80x12 1 PC
7897x592x3 2 PCS	8605x452.5x15 2 PCS

1

A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 ④ ③ A1

A1

2

H H I1 H H ④ ③

I1

H

3

G C G 8 C G G

G G G C 8 G G C

C

4pcs

G

8pcs

5 A2 2pcs L 2pcs 6 A2 2pcs L 2pcs 1 2 3 1 2 3

7

Note that part ⑦ is cut up.

Diagram of a 3D rectangular box with numbered sections and an arrow indicating direction, likely illustrating a structural or mechanical assembly.

8

② ⑥ A2 A2 L L

A22pcs

L2pcs

9 A2 6pcs L 6pcs 10 E 4pcs

11

Technical diagram of a 3D box with numbered components and an arrow indicating direction or movement.

12

G G. G G F1 F2 F2 F2 ⑧ ⑧ F1 F2

graph TD
    A["Step 1: Internal components"] --> B["Step 2: Internal components"]
    B --> C["Step 3: Internal components with directional arrows indicating motion"]

F1 2pcs F2 Φ4*18 2pcs G Φ3.5*12 8pcs

Model	XYFG-03
Main Color	White
Safe Loading Weight	60 lbs
Product Size(D× W× H)	406*914*610mm
Net Weight	20.95kg

* Products such as specifications, appearance, and design are subject to modification without prior notice.

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR

Affordable. Reliable. Home Improvement.

SZAFKI DO PRALNI

MODELE: XYFG-0 3

www.vevor.com/support

MODELE: XYFG-0 3

Line drawing of a rectangular cabinet with two doors and a handle (no text or symbols)

Diagram showing eight numbered components arranged in a 3D layout, likely illustrating a mechanical or architectural assembly.

1890x390x12 1 PC	2890x390x12 1 PC	3610x391x12 1 PC
4610x391x12 1 PC	5888x344x12 1 PC	6890x80x12 1 PC
7897x592x3 2 PCS	8605x452.5x15 2 PCS

1

A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 ④ ③ A1

A1

2

H H I1 H H ④ ③

I1

H

3

G C G 8 C G G

G G G C 8 G G C

C

4pcs

G

8pcs

5 A2 2pcs L 2pcs 6 A2 2pcs L 2pcs 1 2 3 1 2 3

7

Note that part ⑦ is cut up.

Diagram of a 3D rectangular box with numbered sections and an arrow indicating direction, likely illustrating a structural or mechanical assembly.

8

② ⑥ A2 A2 L L

A22pcs

L2pcs

9 A2 6pcs L 6pcs 10 E 4pcs

11

Technical diagram of a 3D box with numbered components and an arrow indicating direction or movement.

12

G G. G G F1 F2 F2 F2 ⑧ ⑧ F1 F2

graph TD
    A["Step 1: Internal components"] --> B["Step 2: Internal components"]
    B --> C["Step 3: Internal components with bidirectional arrows indicating motion"]

F1 2pcs F2 Φ4*18 2pcs G Φ3.5*12 8pcs

STREETEASTWOOD NSW 2122 Australia

Importowane do USA: Sanven Technology Ltd. Suite 250, 9166 Anar Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

www.vevor.com/support

VEVOR

Affordable. Reliable. Home Improvement.

ARMOIRES DE BUANDERIE

MODÈLE : XYFG-0 3

www.vevor.com/support

MODÈLE : XYFG-0 3

Line drawing of a rectangular cabinet with two doors and a handle (no text or symbols)

Diagram showing eight numbered components arranged in a 3D layout, likely illustrating a mechanical or architectural assembly.

1890x390x12 1 PC	2890x390x12 1 PC	3610x391x12 1 PC
4610x391x12 1 PC	5888x344x12 1 PC	6890x80x12 1 PC
7897x592x3 2 PCS	8605x452.5x15 2 PCS

1

A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 ④ ③ A1

A1

2

H H I1 H H ④ ③

I1

H

3

G C G 8 C G G

G G G C 8 G G C

C

4pcs

G

8pcs

5 A2 2pcs L 2pcs 6 A2 2pcs L 2pcs 1 2 3 1 2 3

7

Note that part ⑦ is cut up.

Diagram of a 3D rectangular box with numbered sections and an arrow indicating direction, likely illustrating a structural or mechanical assembly.

8

② ⑥ A2 A2 L L

A2 [WSTY] 2pcs

L 2pcs

9 A2 6pcs L 6pcs 10 E 4pcs

11

Technical diagram of a 3D box with numbered components and an arrow indicating direction or movement.

12

G G. G G F1 F2 F2 F2 ⑧ ⑧ F1 F2

graph TD
    A["Top Section"] --> B["Left Component"]
    B --> C["Right Component"]
    C --> D["Bottom Section"]
    D --> E["Left Component with Arrow indicating direction"]
    E --> F["Right Component with Arrow indicating direction"]

F1 2pcs F2 Φ4*18 2pcs G Φ3.5*12 8pcs

Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

Affordable. Reliable. Home Improvement.

WASCHKÜCHENSCHRÄNKE

MODELL: XYFG-0 3

www.vevor.com/support

MODELL: XYFG-0 3

Line drawing of a rectangular cabinet with two doors and a handle (no text or symbols)

Diagram showing eight numbered components arranged in a 3D layout, likely illustrating a mechanical or architectural assembly.

1890x390x12 1 PC	2890x390x12 1 PC	3610x391x12 1 PC
4610x391x12 1 PC	5888x344x12 1 PC	6890x80x12 1 PC
7897x592x3 2 PCS	8605x452.5x15 2 PCS

1

A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 ④ ③ A1 A1

A1

2

H H I1 H H ④ ③

I1

H

3

G C G 8 C G G

G G G C 8 G G C

5 A2 2pcs L 2pcs 6 A2 2pcs L 2pcs 1 2 3 1 2 3

7

Note that part ⑦ is cut up.

Diagram of a 3D rectangular box with numbered sections and an arrow indicating direction, likely illustrating a structural or mechanical assembly.

8

② ⑥ A2 A2 L L

A22pcs

L2pcs

9 A2 6pcs L 6pcs 10 E 4pcs

11

Technical diagram of a 3D box with numbered components and an arrow indicating direction or movement.

12

G G. G G F1 F2 F2 F2 ⑧ ⑧ F1 F2

graph TD
    A["Top Section"] --> B["Left Component"]
    B --> C["Right Component"]
    C --> D["Bottom Section"]
    D --> E["Left Component with Arrow indicating direction"]
    E --> F["Right Component with Arrow indicating direction"]

F1 2pcs F2 Φ4*18 2pcs G Φ3.5*12 8pcs

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

Affordable. Reliable. Home Improvement.

WASRUIMTE KASTEN

MODEL: XYFG-0 3

www.vevor.com/support

MODEL: XYFG-0 3

Line drawing of a rectangular cabinet with two doors and a handle (no text or symbols)

Diagram showing eight numbered components arranged in a 3D layout, likely illustrating a mechanical or architectural assembly.

1890x390x12 1 PC	2890x390x12 1 PC	3610x391x12 1 PC
4610x391x12 1 PC	5888x344x12 1 PC	6890x80x12 1 PC
7897x592x3 2 PCS	8605x452.5x15 2 PCS

1

A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 ④ ③ A1

A1

2

H H I1 H H ④ ③

I1

H

3

G C G 8 C G G

G G G C 8 G G C

C

4pcs

G

8pcs

5 A2 2pcs L 2pcs 6 A2 2pcs L 2pcs 1 2 3 1 2 3

7

Note that part ⑦ is cut up.

Diagram of a 3D rectangular box with numbered sections and an arrow indicating direction, likely illustrating a structural or mechanical assembly.

8

② ⑥ A2 A2 L L

A22pcs

L2pcs

9 A2 6pcs L 6pcs 10 E 4pcs

11

Technical diagram of a 3D box with numbered components and an arrow indicating direction or movement.

12

G G. G G F1 F2 F2 F2 ⑧ ⑧ F1 F2

graph TD
    A["Step 1: Internal components"] --> B["Step 2: Internal components"]
    B --> C["Step 3: Internal components with bidirectional arrows indicating motion"]

F1 2pcs F2 Φ4*18 2pcs G Φ3.5*12 8pcs

Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion

House, London Road, Staines-upon-Thames, Surrey

TW18 4AX

Technische ondersteuning en e-garantiecertificaat www.vevor.com/support

VEVOR

Affordable. Reliable. Home Improvement.

TVÄTTSTUGA SKÅP

MODELL: XYFG-0 3

www.vevor.com/support

MODELL: XYFG-0 3

Line drawing of a rectangular cabinet with two doors and a handle (no text or symbols)

Diagram showing eight numbered components arranged in a 3D layout, likely illustrating a mechanical or architectural assembly.

1890x390x12 1 PC	2890x390x12 1 PC	3610x391x12 1 PC
4610x391x12 1 PC	5888x344x12 1 PC	6890x80x12 1 PC
7897x592x3 2 PCS	8605x452.5x15 2 PCS

1

A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 ④ ③ A1

A1

2

H H I1 H H ④ ③

I1

H

3

G C G 8 C G G

G G G C 8 G G C

5 A2 2pcs L 2pcs 6 A2 2pcs L 2pcs 1 2 3 1 2 3

7

Note that part ⑦ is cut up.

Diagram of a 3D rectangular box with numbered sections and an arrow indicating direction, likely illustrating a structural or mechanical assembly.

8

② ⑥ A2 A2 L L

A22pcs

L2pcs

9 A2 6pcs L 6pcs 10 E 4pcs

11

Technical diagram of a 3D box with numbered components and an arrow indicating direction or movement.

12

G G. G G F1 F2 F2 F2 ⑧ ⑧ F1 F2

graph TD
    A["Step 1: Internal components"] --> B["Step 2: Internal components"]
    B --> C["Step 3: Internal components with bidirectional arrows indicating motion"]

F1 2pcs F2 Φ4*18 2pcs G Φ3.5*12 8pcs

Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion

House, London Road, Staines-upon-Thames, Surrey

TW18 4AX

www.vevor.com/support

VEVOR

Affordable. Reliable. Home Improvement.

GABINETES PARA LAVANDERÍA

MODELO: XYFG-0 3

www.vevor.com/support

MODELO: XYFG-0 3

Line drawing of a rectangular cabinet with two doors and a handle (no text or symbols)

Diagram showing eight numbered components arranged in a 3D layout, likely illustrating a mechanical or architectural assembly.

1890x390x12 1 PC	2890x390x12 1 PC	3610x391x12 1 PC
4610x391x12 1 PC	5888x344x12 1 PC	6890x80x12 1 PC
7897x592x3 2 PCS	8605x452.5x15 2 PCS

1

A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 ④ ③ A1 A1

A1

2

H H I1 H I1 ④ ③

II

H

3

G C G 8 C G G

G G G C 8 G G C

5 A2 2pcs L 2pcs 6 A2 2pcs L 2pcs 1 2 3 1 2 3

7

Note that part ⑦ is cut up.

Diagram of a 3D rectangular box with numbered sections and an arrow indicating direction, likely illustrating a structural or mechanical assembly.

8

② ⑥ A2 A2 L L

A22pcs

L2pcs

9 A2 6pcs L 6pcs 10 E 4pcs

11

Technical diagram of a 3D box with numbered components and an arrow indicating direction or movement.

12

G G. G G F1 F2 F2 F2 ⑧ ⑧ F1 F2

graph TD
    A["Step 1: Internal components"] --> B["Step 2: Internal components"]
    B --> C["Step 3: Internal components with directional arrows indicating motion"]

F1 2pcs F2 Φ4*18 2pcs G Φ3.5*12 8pcs

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

Affordable. Reliable. Home Improvement.

ARMADI PER LAVANDERIA

MODELLO: XYFG-0 3

www.vevor.com/support

MODELLO: XYFG-0 3

Line drawing of a rectangular cabinet with two doors and a handle (no text or symbols)

Diagram showing eight numbered components arranged in a 3D layout, likely illustrating a mechanical or architectural assembly.

1890x390x12 1 PC	2890x390x12 1 PC	3610x391x12 1 PC
4610x391x12 1 PC	5888x344x12 1 PC	6890x80x12 1 PC
7897x592x3 2 PCS	8605x452.5x15 2 PCS

1

A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 A1 ④ ③ A1

A1

2

H H I1 H H ④ ③

I1

H

3

G C G 8 C G G

G G G C 8 G G C

C

4pcs

G

8pcs

5 A2 2pcs L 2pcs 6 A2 2pcs L 2pcs 1 2 3 1 2 3

7

Note that part ⑦ is cut up.

Diagram of a 3D rectangular box with numbered sections and an arrow indicating direction, likely illustrating a structural or mechanical assembly.

8

② ⑥ A2 A2 L L

A22pcs

L2pcs

9 A2 6pcs L 6pcs 10 E 4pcs

11

Technical diagram of a 3D box with numbered components and an arrow indicating direction or movement.

12

G G. G G F1 F2 F2 F2 ⑧ ⑧ F1 F2

graph TD
    A["Top Section"] --> B["Left Component"]
    B --> C["Right Component"]
    C --> D["Bottom Section"]
    D --> E["Left Component with Arrow indicating direction"]
    E --> F["Right Component with Arrow indicating direction"]

F1 2pcs F2 Φ4*18 2pcs G Φ3.5*12 8pcs

Importato in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Importato negli USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX