HZS005 - Storage furniture Vevor - Free user manual and instructions

USER MANUAL HZS005 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

RATTAN SHOE CABINET

USER MANUAL

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to co all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually Saving Half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

Rattan Shoe Cabinet

Line drawing of a multi-level server rack cabinet with mesh panels and mounting feet (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate

www.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of o user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you ag there are any technology or software updates on our product.

WARNING:

Please read this manual carefully before using the product. Failure do so may result in serious injury.

ASSEMBLY PRECAUTIONS

1. Assemble only according to these instructions. Improper assembly c create hazards.

2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.

3. Keep the assembly area clean and well-lit.

4. Keep bystanders out of the area during assembly.

5. Do not assemble when tired or when under the influence of alcohol drugs or medication.

6. The product capabilities apply to properly and completely assembled products only.

7. Assemble on a flat, level, hard and smooth surface capable of sa supporting the Rattan Shoe Cabinet.

8. For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unwrap separate all parts in a clean work area.

SAVE THESE INSTRUCTIONS

USE PRECAUTIONS

TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:

1. This product is not a toy Do not allow children to play with or r item.
2. Do not exceed weight capacities, before moving.
3. Use only on a flat, hard and smooth surface capable of safely supporting a fully loaded Rattan Shoe Cabinet.
4. Use as intended only.

Inspect before every use; do not use if parts are loose or damaged.

TECHNICAL SPECIFICATIONS

Model	HZS005	HZS006
Product Dimensions (LxWxH)(mm)	647*263*1028
Net Weight(kg)	About 19.95
Color	Wood	Black

*Products such as specifications, appearance, and design are subject to modification without prior notice.

Exploded view diagram of a modular device with numbered components, likely for assembly or installation purposes.

A		B		C		D		E
M6x35mm	8+1PCS	∅15x9mm	8+1PCS	M4x40mm	32+2PCS	∅6x30mm	16+2PCS	M3x12mm	2PCS
F		G		H		I		J
	2PCS	M3.5x12mm	6PC	96mm	3PCS	M6mm	4PCS	M6x30mm	8+1PCS
K[IMAGE]M3.5x14mm	24+2PCS	L[IMAGE]2PCS		MM1	M2	M34PCS		NM4x10mm	4PCS
O∅6x30mm	4PCS	P∅12mm	16+2PCS	QM4mm	1PC	R2PCS		SM3x14mm	2PCS
T4PCS		U2PCS

STEP 1

M1 M1 M2 M1 M2 M1 6 M1 M2 7 M1 M2 M1 M2 M1 x 4PCS

M1 × 4PCS

M2 × 4PCS

STEP 2 D ② D D ③ D x 6PCS STEP 3 C C ② ③ C x 2PCS

STEP 4

graph LR
    A["Cell Injection"] --> B["Cell Fusion"]
    B --> C["Tissue Formation"]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#cfc,stroke:#333

② ③ ④ ⑤ ⑥ ⑦ C C C C 90°

	C×8PCS
	P×8PCS

STEP 5

graph LR
    A["Screw with screw"] --> B["Cell with cross"]
    B --> C["Tissue with labeled components P"]
    C --> D["Final structure with labeled parts P, C"]

C C C ⑦ C ② ④ ⑤ ⑥ 90° mm × 8PCS

	C×8PCS
	P×8PCS

STEP 6

D x 6PCS D D 5 D 4 6 2 7 D x 6PCS

STEP 7 C C C C 8 C 6 7 C x 6PCS

STEP 8

J x 4PCS J x 120 J J J J 8 6 7 10 10

	J×4PCS
	Q×1PC

STEP 9

9 J J 8 6 7 J

J Q

	J×4PCS
	Q×1PC

STEP 10

Technical diagram of a mechanical assembly with a bolt and spiral component, enclosed in a circle (no text or symbols)

1 1 8 1 6 7

I x 4PCS

STEP 11

D 2 7 6 8

D x 4PCS

STEP 12 A E F 180° A x 4PCS E x 2PCS F x 2PCS STEP 13 ① B ② B ③ ④ ⑤ ⑥ ⑦ ⑧ B x 4PCS 1 2 3 >90°

STEP 14

T S ① T ⑦ S x 2PCS 7 x 2PCS

	S×2PCS
	T×2PCS

STEP 15

WALL

	C×2PCS
	O×4PCS
	T×2PCS

STEP 16

WALL

Simple line drawing of a sword and shield inside a circle, no text or symbols present

Abstract line drawing of a human head with a curved arrow and 'U' label, enclosed in a circle (no text or symbols beyond the label)

Diagram of a mechanical linkage or tool with labeled component 'U' (no text or symbols beyond the label)

U C C ⑦ ⑥ ⑧

C

	C×2PCS
	U×2PCS

STEP 17 C C C x 4PCS STEP 18 15 13 STEP 19 A x 4PCS G x 2PCS H x 1PC

STEP 20

STEP 21 K L x 2PCS R x 2PCS STEP 22 18 16 x2 STEP 23 K 18 16 x2 K x 4PCS

STEP 24

17 16 x2

STEP 25

K

17 K 16 x2

K × 4PCS

STEP 26

G

16 G x2 H

			G x 4PCS
			H x 2PCS

STEP 27

1 2 3 4 5 6 7 8 9 10 11

STEP 28

6 7 M3 M3 N 16 N M3

	M3 x 2PCS
	N x 2PCS

STEP 29

6 7 17

STEP 30

6 7 16 K K x 2PCS

K x 2PCS

STEP 31

M3 M3 N 16 N 6 N M3

	M3 x 2PCS
	N x 2PCS

STEP 32

6 17

STEP 33

K 6 16 K x 2PCS

K x 2PCS

COMPLETION

Isometric line drawing of a multi-level server cabinet with mesh panels and mounting feet (no text or symbols)

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Line drawing of a multi-level server cabinet with mesh panels and mounting feet (no text or symbols)

BESOIN D'AIDE ? CONTACTEZ-NOUS!

Exploded view diagram of a multi-panel storage unit with numbered components and a grid-patterned panel labeled 'x2'

A		B		C		D		E
M6x35mm	8+1PCS	∅15x9mm	8+1PCS	M4x40mm	32+2PCS	∅6x30mm	16+2PCS	M3x12mm	2PCS
F		G		H		I		J
	2PCS	M3.5x12mm	6PC	96mm	3PCS	M6mm	4PCS	M6x30mm	8+1PCS
K[IMAGE]M3.5x14mm	24+2PCS	L[IMAGE]2PCS		M M1 M2 M34PCS				NM4x10mm	4PCS
O		P		Q		R		S
∅6x30mm	4PCS	∅12mm	16+2PCS	M4mm	1PC		2PCS	M3x14mm	2PCS
T		U
	4PCS		2PCS

STEP 1

M1 M1 M2 M1 M2 M1 6 M1 M2 7 M1 M2 M1 M2 M1 x 4PCS

M1 × 4PCS

M2 × 4PCS

STEP 2 D ② D D ③ D x 6PCS STEP 3 C C ② ③ C x 2PCS

STEP 4

graph LR
    A["Cell injection with arrow, labeled 'C'"] --> B["Two circular structures: one with a spiral and dashed line, another with a cross, and a shaded oval labeled 'P'"]
    B --> C["Three circular structures: one with a cross, one with a cross, and one with a shaded oval labeled 'C'"]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#cfc,stroke:#333

② ③ ④ ⑤ ⑥ ⑦ C C C C 90°

	C×8PCS
	P×8PCS

STEP 5

graph LR
    A["Screw with screw"] --> B["Cell with cross"]
    B --> C["Tissue with labeled components P"]
    C --> D["Final structure with labeled parts P, C"]

C C C ⑦ C ② ④ ⑤ ⑥ 90° mm × 8PCS

	C×8PCS
	P×8PCS

STEP 6

D x 6PCS D D 5 D 4 6 2 7 D x 6PCS

STEP 7 C C C C 8 C 6 7 C x 6PCS

STEP 8

J x 4PCS J x 120 J J J J 8 6 7 10 10

	J×4PCS
	Q×1PC

STEP 9

9 J J 8 6 7 J

J Q

	J×4PCS
	Q×1PC

©

STEP 12 A E F 180° A x 4PCS E x 2PCS F x 2PCS STEP 13 ① B B B ② B ③ ④ ⑤ ⑥ ⑦ ⑧ B x 4PCS 1 2 3 >90°

STEP 14

T S ① T ⑦ S x 2PCS 7 x 2PCS

	S×2PCS
	T×2PCS

STEP 15

WALL

	C×2PCS
	O×4PCS
	T×2PCS

STEP 16

WALL

U U U

U C C ⑦ ⑥ ⑧

C

	C×2PCS
	U×2PCS

STEP 17 C C C x 4PCS STEP 18 15 13 STEP 19 A x 4PCS G x 2PCS H x 1PC

STEP 20

STEP 21 K L x 2PCS R x 2PCS x2 STEP 22 18 16 x2 STEP 23 K 18 16 x2 K x 4PCS

STEP 24

17 16 x2

STEP 25

K

17 K 16 x2

K × 4PCS

STEP 26

G

16 G x2 H

	G×4PCS
	H×2PCS

STEP 27

1 2 3 4 5 6 7 8 9 10 11

STEP 28

6 7 M3 M3 N 16 N M3

	M3 x 2PCS
	N x 2PCS

STEP 29

6 7 17

STEP 30

6 7 16 K K K x 2PCS

K x 2PCS

STEP 31

M3 M3 N 16 N 6 N M3

	M3 x 2PCS
	N x 2PCS

STEP 32

6 17

STEP 33

K 6 16 K x 2PCS

K x 2PCS

COMPLETION

Isometric line drawing of a multi-level server cabinet with mesh panels and mounting feet (no text or symbols)

Fabricant : Shanghaimuxinmuyeyouxiangongsi

Adresse : Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai 200 000 CN.

Importé en Australie : SIHAO PTY LTD. 1 RUE ROKEVAASTWOOD NSW 2122 Australie

Lieu, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

RATTAN-SCHUHSCHRANK

BENUTZERHANDBUCH

Line drawing of a multi-level server rack cabinet with mesh panels and mounting feet (no text or symbols)

www.vevor.com/support

Exploded view diagram of a multi-panel storage unit with numbered components and a grid-patterned panel labeled 'x2'

A		B		C		D		E
M6x35mm	8+1PCS	∅15x9mm	8+1PCS	M4x40mm	32+2PCS	∅6x30mm	16+2PCS	M3x12mm	2PCS
F		G		H		I		J
	2PCS	M3.5x12mm	6PC	96mm	3PCS	M6mm	4PCS	M6x30mm	8+1PCS
K				M				N
M3.5x14mm	24+2PCS		2PCS	M1 M2 M3
								4PCS	4PCS
O		P		Q		R		S
∅6x30mm	4PCS	∅12mm	16+2PCS	M4mm	1PC		2PCS	M3x14mm	2PCS
T		U
	4PCS		2PCS

STEP 1

M1 M1 M2 M1 M2 M1 6 M1 M2 7 M1 M2 M1 M2 M1 x 4PCS

M1 × 4PCS

M2 × 4PCS

STEP 2 D ② D D ③ D x 6PCS STEP 3 C C ② ③ C x 2PCS

STEP 4

graph LR
    A["Cell Injection"] --> B["Cell Death"]
    B --> C["Cell Death"]

② ③ ④ ⑤ ⑥ ⑦ C C C C 90°

	C×8PCS
	P×8PCS

STEP 5

graph LR
    A["Screw with screw"] --> B["Cell with cross"]
    B --> C["Tissue with labeled components P"]
    C --> D["Final structure with labeled parts P, C"]

C C C ⑦ C ② ④ ⑤ ⑥ 90° mm × 8PCS

	C×8PCS
	P×8PCS

STEP 6

D x 6PCS D D 5 D 4 6 2 7 D x 6PCS

STEP 7 C C C C 8 C 6 7 C x 6PCS

STEP 8

J x 4PCS Q x 1PG 8 10 J J J 10 6 7 J Q

	J×4PCS
	Q×1PC

STEP 9

9 J J 8 6 7 J

J Q

	J×4PCS
	Q×1PC

STEP 10

Technical diagram of a mechanical assembly with a bolt and spiral component, enclosed in a circle (no text or symbols)

1 1 8 1 6 7

I x 4PCS

STEP 11

D 2 7 6 8

D x 4PCS

STEP 12 A E F 180° A x 4PCS E x 2PCS F x 2PCS STEP 13 ① B B B ② B ③ ④ ⑤ ⑥ ⑦ ⑧ B x 4PCS 1 2 3 >90°

STEP 14

T S ① T ⑦ S x 2PCS 7 x 2PCS

	S×2PCS
	T×2PCS

STEP 15

WALL

	C×2PCS
	O×4PCS
	T×2PCS

STEP 16

WALL

U U U

U C C 7 6 8

C

	C×2PCS
	U×2PCS

STEP 17 C C C x 4PCS STEP 18 15 13 STEP 19 A x 4PCS G x 2PCS H x 1PC

STEP 20

STEP 21 K L x 2PCS R x 2PCS STEP 22 18 16 x2 STEP 23 K 18 16 x2 K x 4PCS

STEP 24

17 16 x2

STEP 25

K

17 K 16 x2

K × 4PCS

STEP 26

G

16 G x2 H

	G x 4PCS
	H x 2PCS

STEP 27

1 2 3 4 5 6 7 8 9 10 11

STEP 28

6 7 M3 M3 N 16 N M3

	M3 x 2PCS
	N x 2PCS

STEP 29

6 7 17

STEP 30

6 7 16 K K x 2PCS

K x 2PCS

STEP 31

M3 M3 N 16 N 6 N M3

	M3 x 2PCS
	N x 2PCS

STEP 32

6 17

STEP 33

K 6 16 K x 2PCS

K x 2PCS

COMPLETION

Isometric line drawing of a multi-level server cabinet with mesh panels and mounting feet (no text or symbols)

Hersteller: Shanghaimuxinmuyeyouxiangongsi

Adresse: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai, 200.000 CN.

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Line drawing of a multi-level server cabinet with mesh panels and mounting feet (no text or symbols)

Exploded view diagram of a multi-panel storage unit with numbered components and a grid-patterned panel labeled 'x2'

A		B		C		D		E
M6x35mm	8+1PCS	∅15x9mm	8+1PCS	M4x40mm	32+2PCS	∅6x30mm	16+2PCS	M3x12mm	2PCS
F		G		H		I		J
	2PCS	M3.5x12mm	6PC	96mm	3PCS	M6mm	4PCS	M6x30mm	8+1PCS
K[M3.5x14mm]	24+2PCS	L[IMAGE]		M M1 M2 M3				N
								M4x10mm	4PCS
O		P		Q		R		S
∅6x30mm	4PCS	∅12mm	16+2PCS	M4mm	1PC		2PCS	M3x14mm	2PCS
T		U
	4PCS		2PCS

STEP 1

M1 M1 M2 M1 M2 M1 6 M1 M2 7 M1 M2 M1 M2 M1 x 4PCS

M1 × 4PCS

M2 × 4PCS

STEP 2 D ② D D ③ D x 6PCS STEP 3 C C ② ③ C x 2PCS

STEP 4

graph LR
    A["Cell injection with arrow, labeled 'C'"] --> B["Two circular structures: one with a spiral and dashed line, another with a cross, and a shaded oval labeled 'P'"]
    B --> C["Three circular structures: one with a cross, one with a cross, and one with a shaded oval labeled 'C'"]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#cfc,stroke:#333

② ③ ④ ⑤ ⑥ ⑦ C C C C 90°

	C×8PCS
	P×8PCS

STEP 5

graph LR
    A["Screw with screw"] --> B["Cell with cross"]
    B --> C["Tissue with labeled components P"]
    C --> D["Final structure with labeled parts P, C"]

C C C ⑦ C ② ④ ⑤ ⑥ 90° mm × 8PCS

	C×8PCS
	P×8PCS

STEP 6

D x 6PCS D D 5 D 4 6 2 7 D x 6PCS

STEP 7 C C C C 8 C 6 7 C x 6PCS

STEP 8

J x 4PCS Q x 1PC 8 10 J J J 10 6 7 J Q

	J×4PCS
	Q×1PC

STEP 9

9 J J 8 6 7 J

J Q

	J×4PCS
	Q×1PC

STEP 10

Technical diagram of a mechanical assembly with a bolt and spiral component, enclosed in a circle (no text or symbols)

1 1 8 1 6 7

I x 4PCS

STEP 11

D 2 7 6 8

D x 4PCS

STEP 12 A E F 180° A x 4PCS E x 2PCS F x 2PCS STEP 13 ① B ② B ③ ④ ⑤ ⑥ ⑦ ⑧ B x 4PCS 1 2 3 >90°

STEP 14

T S ① T ⑦ S x 2PCS 7 x 2PCS

	S×2PCS
	T×2PCS

STEP 15

WALL

	C×2PCS
	O×4PCS
	T×2PCS

STEP 16

WALL

Simple line drawing of a sword and shield inside a circle, no text or symbols present

Abstract line drawing of a human head with a curved arrow and 'U' label, enclosed in a circle (no text or symbols beyond the label)

Simple line drawing of a mechanical lever or pivot with a U-shaped component, enclosed in a circle (no text or symbols)

U C C ⑦ ⑥ ⑧

C

	C×2PCS
	U×2PCS

STEP 17 C C C x 4PCS STEP 18 15 13 STEP 19 A x 4PCS G x 2PCS H x 1PC

STEP 20

STEP 21 K L x 2PCS R x 2PCS STEP 22 18 16 x2 STEP 23 K 18 16 x2 K x 4PCS

STEP 24

17 16 x2

STEP 25

K

17 K 16 x2

K × 4PCS

STEP 26

G

16 G x2 H

	G×4PCS
	H×2PCS

STEP 27

1 2 3 4 5 6 7 8 9 10 11

STEP 28

6 7 M3 M3 N 16 N M3

	M3 x 2PCS
	N x 2PCS

STEP 29

6 7 17

STEP 30

6 7 16 K K x 2PCS

K x 2PCS

STEP 31

M3 M3 N 16 N 6 N M3

	M3 x 2PCS
	N x 2PCS

STEP 32

6 17

STEP 33

K 6 16 K x 2PCS

K x 2PCS

COMPLETION

Isometric line drawing of a multi-level server cabinet with mesh panels and mounting feet (no text or symbols)

Importato in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122Australia

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Line drawing of a multi-level server cabinet with mesh panels and mounting feet (no text or symbols)

Exploded view diagram of a multi-panel storage unit with numbered components and a grid-patterned panel labeled 'x2'

A		B		C		D		E
M6x35mm	8+1PCS	∅15x9mm	8+1PCS	M4x40mm	32+2PCS	∅6x30mm	16+2PCS	M3x12mm	2PCS
F		G		H		I		J
	2PCS	M3.5x12mm	6PC	96mm	3PCS	M6mm	4PCS	M6x30mm	8+1PCS
K[IMAGE]M3.5x14mm	24+2PCS	L[IMAGE]2PCS		M M1 M2 M34PCS				NM4x10mm	4PCS
O∅6x30mm	4PCS	P∅12mm	16+2PCS	QM4mm	1PC	R2PCS		SM3x14mm	2PCS
T4PCS		U2PCS

STEP 1

M1 M1 M2 M1 M2 M1 6 M1 M2 7 M1 M2 M1 M2 M1 x 4PCS

M1 × 4PCS

M2 × 4PCS

STEP 2 D ② D D ③ D x 6PCS STEP 3 C C ② ③ C x 2PCS

STEP 4

graph LR
    A["Cell Injection"] --> B["Cell Death"]
    B --> C["Cell Death with Cell P"]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#cfc,stroke:#333

② ③ ④ ⑤ ⑥ ⑦ C C C C 90°

	C×8PCS
	P×8PCS

STEP 5

graph LR
    A["Screw with screw"] --> B["Cell with cross"]
    B --> C["Tissue with labeled components P"]
    C --> D["Final structure with labeled parts P, C"]

C C C ⑦ C ② ④ ⑤ ⑥ 90° mm × 8PCS

	C×8PCS
	P×8PCS

STEP 6 D x 6PCS

STEP 7 C C C C 8 C 6 7 C x 6PCS

STEP 8

J x 4PCS Q x 1PG 8 10 J J J 10 6 7 J Q

	J×4PCS
	Q×1PC

STEP 9

9 J J 8 6 7 J

J Q

	J×4PCS
	Q×1PC

STEP 10

Technical diagram of a mechanical assembly with a bolt and spiral component, enclosed in a circle (no text or symbols)

1 1 8 1 6 7

I x 4PCS

STEP 11

D 2 7 6 8

D x 4PCS

STEP 12 A E F 180° A x 4PCS E x 2PCS F x 2PCS STEP 13 ① B ② B ③ ④ ⑤ ⑥ ⑦ ⑧ B x 4PCS 1 2 3 >90°

STEP 14

T S ① T ⑦ S x 2PCS 7 x 2PCS

	S×2PCS
	T×2PCS

STEP 15

WALL

	C×2PCS
	O×4PCS
	T×2PCS

STEP 16

WALL

Simple line drawing of a sword and shield inside a circle, no text or symbols present

Abstract line drawing of a human head with a curved arrow and 'U' label, enclosed in a circle (no text or symbols beyond the label)

Diagram of a mechanical assembly with labeled component 'U' (no text or symbols beyond the label)

U C C 7 6 8

C

	C×2PCS
	U×2PCS

STEP 17 C C C x 4PCS STEP 18 15 13 STEP 19 A x 4PCS G x 2PCS H x 1PC

STEP 20

STEP 21 K L x 2PCS R x 2PCS STEP 22 18 16 x2 STEP 23 K 18 16 x2 K x 4PCS

STEP 24

17 16 x2

STEP 25

K

17 K 16 x2

K × 4PCS

STEP 26

G

16 G x2 H

	G×4PCS
	H×2PCS

STEP 27

1 2 3 4 5 6 7 8 9 10 11

STEP 28

6 7 M3 M3 N 16 N M3

	M3 x 2PCS
	N x 2PCS

STEP 29

6 7 17

STEP 30

6 7 16 K K x 2PCS

K x 2PCS

STEP 31

M3 M3 N 16 N 6 N M3

	M3 x 2PCS
	N x 2PCS

STEP 32

6 17

STEP 33

K 6 16 K x 2PCS

K x 2PCS

COMPLETION

Isometric line drawing of a multi-level server cabinet with mesh panels and mounting feet (no text or symbols)

Fabricante: Shanghaimuxinmuyeyouxiangongsi

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

RATTANOWA SZAFKA NA BUTY PODREÇZNIK UŻYTKOWNIKA

NR MODELU: HZS005, HZS006

Line drawing of a multi-tiered server cabinet with mesh panels and mounting feet (no text or symbols)

POTRZEBUJESZ POMOCY? SKONTAKTUJ SIE Z NAMI!

www.vevor.com/support

Exploded view diagram of a multi-panel storage unit with numbered components and a grid-patterned panel labeled 'x2'

A		B		C		D		E
M6x35mm	8+1PCS	∅15x9mm	8+1PCS	M4x40mm	32+2PCS	∅6x30mm	16+2PCS	M3x12mm	2PCS
F		G		H		I		J
	2PCS	M3.5x12mm	6PC	96mm	3PCS	M6mm	4PCS	M6x30mm	8+1PCS
K[IMAGE]M3.5x14mm	24+2PCS	L[IMAGE]2PCS		M M1 M2 M34PCS				NM4x10mm	4PCS
O∅6x30mm	4PCS	P∅12mm	16+2PCS	QM4mm	1PC	R2PCS		SM3x14mm	2PCS
T4PCS		U2PCS

STEP 1

M1 M1 M2 M1 M2 M1 6 M1 M2 7 M1 M2 M1 M2 M1 x 4PCS

M1 × 4PCS

M2 × 4PCS

STEP 2 D ② D D ③ D x 6PCS STEP 3 C C ② ③ C x 2PCS

STEP 4

graph LR
    A["Cell Injection"] --> B["Cell Death"]
    B --> C["Cell Death with Cell P"]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#cfc,stroke:#333

② ③ ④ ⑤ ⑥ ⑦ C C C C 90°

	C×8PCS
	P×8PCS

STEP 5

graph LR
    A["Screw with screw"] --> B["Cell with cross"]
    B --> C["Tissue with labeled components P"]
    C --> D["Final structure with labeled parts P, C"]

C C C ⑦ C ② ④ ⑤ ⑥ 90° mm × 8PCS

	C×8PCS
	P×8PCS

STEP 6

D x 6PCS D D 5 D 4 6 2 7 D x 6PCS

STEP 7 C C C C 8 C 6 7 C x 6PCS

STEP 8

J x 4PCS Q x 1PG 8 10 J J J 10 6 7 J Q

	J×4PCS
	Q×1PC

STEP 9

9 J J 8 6 7 J

J Q

	J×4PCS
	Q×1PC

STEP 10

Technical diagram of a mechanical assembly with a bolt and spiral component, enclosed in a circle (no text or symbols)

1 1 8 1 6 7

I x 4PCS

STEP 11

D 2 7 6 8

D x 4PCS

STEP 12 A E F 180° A x 4PCS E x 2PCS F x 2PCS STEP 13 ① B B B ② B ③ ④ ⑤ ⑥ ⑦ ⑧ B x 4PCS 1 2 3 >90°

STEP 14

T S ① T ⑦ S x 2PCS 7 x 2PCS

	S×2PCS
	T×2PCS

STEP 15

WALL

	C×2PCS
	O×4PCS
	T×2PCS

STEP 16

WALL

Simple line drawing of a sword and shield inside a circle, no text or symbols present

Abstract line drawing of a human head with a curved arrow and 'U' label, enclosed in a circle (no text or symbols beyond the label)

Diagram of a mechanical assembly with labeled component 'U' (no text or symbols beyond the label)

U C C 7 6 8

C

	C×2PCS
	U×2PCS

STEP 17 C C C x 4PCS STEP 18 15 13 STEP 19 A x 4PCS G x 2PCS H x 1PC

STEP 20

STEP 21 K L x 2PCS R x 2PCS STEP 22 18 16 x2 STEP 23 K 18 16 x2 K x 4PCS

STEP 24

17 16 x2

STEP 25

K

17 K 16 x2

K × 4PCS

STEP 26

G

16 G x2 H

	G×4PCS
	H×2PCS

STEP 27

1 2 3 4 5 6 7 8 9 10 11

STEP 28

6 7 M3 M3 N 16 N M3

	M3 x 2PCS
	N x 2PCS

STEP 29

6 7 17

STEP 30

6 7 16 K K x 2PCS

K x 2PCS

STEP 31

M3 M3 N 16 N 6 N M3

	M3 x 2PCS
	N x 2PCS

STEP 32

6 17

STEP 33

K 6 16 K x 2PCS

K x 2PCS

COMPLETION

Isometric line drawing of a multi-level server cabinet with mesh panels and mounting feet (no text or symbols)

Producent: Shanghaimuxinmuyeyouxiangongsi

Adres: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Szanghaj 200000 CN.

Import do AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD Nowa Południowa Walia 2122 Australia

Import do USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, Kalifornia 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

ROTAN SCHOENENKAST

US E R HANDLEIDING

Line drawing of a multi-level server cabinet with mesh panels and mounting feet (no text or symbols)

HULP NODIG? NEEM CONTACT MET ONS OP!

www.vevor.com/support

Exploded view diagram of a multi-panel storage unit with numbered components and a grid-patterned panel labeled 'x2'

A		B		C		D		E
M6x35mm	8+1PCS	∅15x9mm	8+1PCS	M4x40mm	32+2PCS	∅6x30mm	16+2PCS	M3x12mm	2PCS
F		G		H		I		J
	2PCS	M3.5x12mm	6PC	96mm	3PCS	M6mm	4PCS	M6x30mm	8+1PCS
KM3.5x14mm	24+2PCS		2PCS					N
								M4x10mm	4PCS
O		P		Q		R		S
∅6x30mm	4PCS	∅12mm	16+2PCS	M4mm	1PC		2PCS	M3x14mm	2PCS
T		U
	4PCS		2PCS

STEP 1

M1 M1 M2 M1 M2 M1 6 M1 M2 7 M1 M2 M1 M2 M1 x 4PCS

M1 × 4PCS

M2 × 4PCS

STEP 2 D ② D D ③ D x 6PCS STEP 3 C C ② ③ C x 2PCS

STEP 4

graph LR
    A["Cell Injection"] --> B["Cell Death"]
    B --> C["Cell Death"]

② ③ ④ ⑤ ⑥ ⑦ C C C C 90°

	C×8PCS
	P×8PCS

STEP 5

graph LR
    A["Screw with screw"] --> B["Cell with cross"]
    B --> C["Tissue with labeled components P"]
    C --> D["Final structure with labeled parts P, C"]

C C C ⑦ C ② ④ ⑤ ⑥ 90° mm × 8PCS

	C×8PCS
	P×8PCS

STEP 6

D x 6PCS D D 5 D 4 6 2 7 D x 6PCS

STEP 7 C C C C 8 C 6 7 C x 6PCS

STEP 8

J x 4PCS Q x 1PG 8 10 J J J 10 6 7 J Q

	J×4PCS
	Q×1PC

STEP 9

9 J J 8 6 7 J

J Q

	J×4PCS
	Q×1PC

STEP 10

Technical diagram of a mechanical assembly with a bolt and spiral component, enclosed in a circle (no text or symbols)

1 1 8 1 6 7

I x 4PCS

STEP 11

D 2 7 6 8

D x 4PCS

STEP 12 A E F 180° A x 4PCS E x 2PCS F x 2PCS STEP 13 ① B B B ② B ③ ④ ⑤ ⑥ ⑦ ⑧ B x 4PCS 1 2 3 >90°

STEP 14

T S ① T ⑦ S x 2PCS 7 x 2PCS

	S×2PCS
	T×2PCS

STEP 15

WALL

	C×2PCS
	O×4PCS
	T×2PCS

STEP 16

WALL

Simple line drawing of a sword and shield inside a circle, no text or symbols present

Abstract line drawing of a human head with a curved arrow and 'U' label, enclosed in a circle (no text or symbols beyond the label)

Diagram of a mechanical linkage or tool with labeled component 'U' (no text or symbols beyond the label)

U C C 7 6 8

C

	C×2PCS
	U×2PCS

STEP 17 C C C x 4PCS STEP 18 15 13 STEP 19 A x 4PCS G x 2PCS H x 1PC

STEP 20

STEP 21 K L x 2PCS R x 2PCS STEP 22 18 16 x2 STEP 23 K 18 16 x2 K x 4PCS

STEP 24

17 16 x2

STEP 25

K

17 K 16 x2

K × 4PCS

STEP 26

G

16 G x2 H

	G x 4PCS
	H x 2PCS

STEP 27

1 2 3 4 5 6 7 8 9 10 11

STEP 28

6 7 M3 M3 N 16 N M3

	M3 x 2PCS
	N x 2PCS

STEP 29

6 7 17

STEP 30

6 7 16 K K x 2PCS

K x 2PCS

STEP 31

M3 M3 N 16 N 6 N M3

	M3 x 2PCS
	N x 2PCS

STEP 32

6 17

STEP 33

K 6 16 K x 2PCS

K x 2PCS

COMPLETION

Isometric line drawing of a multi-level cabinet or rack unit with mesh panels and metal railings (no text or symbols)

Fabrikant: Shanghaimuxinmuyeyouxiangongsi

Adres: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai 200.000 CN.

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

SKOSKÅP I ROTTING

A R MANUAL

MODELLNR: HZS005, HZS006

Line drawing of a multi-tiered server cabinet with mesh panels and mounting feet (no text or symbols)

BEHÖVER HJÄLP? KONTAKTA OSS!

www.vevor.com/support

Exploded view diagram of a multi-panel storage unit with numbered components and a grid-patterned panel labeled 'x2'

A		B		C		D		E
M6x35mm	8+1PCS	∅15x9mm	8+1PCS	M4x40mm	32+2PCS	∅6x30mm	16+2PCS	M3x12mm	2PCS
F		G		H				J
	2PCS	M3.5x12mm	6PC	96mm	3PCS	M6mm	4PCS	M6x30mm	8+1PCS
K				M M1 M2 M34PCS				NM4x10mm	4PCS
M3.5x14mm	24+2PCS
O		P		Q		R		S
∅6x30mm	4PCS	∅12mm	16+2PCS	M4mm	1PC		2PCS	M3x14mm	2PCS
T		U
	4PCS		2PCS

STEP 1

M1 M1 M2 M1 M2 M1 6 M1 M2 7 M1 M2 M1 M2 M1 x 4PCS

M1 × 4PCS

M2 × 4PCS

STEP 2 D ② D D ③ D x 6PCS STEP 3 C C ② ③ C x 2PCS

STEP 4

graph LR
    A["Cell Injection"] --> B["Cell Death"]
    B --> C["Cell Death"]

② ③ ④ ⑤ ⑥ ⑦ C C C C 90°

	C×8PCS
	P×8PCS

STEP 5

graph LR
    A["Screw with spiral"] --> B["Cell with cross"]
    B --> C["Tissue with labeled components P"]
    C --> D["Final structure with labeled parts P, C"]

C C C ⑦ C ② ④ ⑤ ⑥ 90° mm × 8PCS

	C×8PCS
	P×8PCS

STEP 6

D x 6PCS D D 5 D 4 6 2 7 D x 6PCS

STEP 7 C C C C 8 C 6 7 C x 6PCS

STEP 8

J x 4PCS Q x 1PG 8 10 J J J 10 6 7 J Q

	J×4PCS
	Q×1PC

STEP 9

9 J J 8 6 7 J

J Q

	J×4PCS
	Q×1PC

STEP 10

Technical diagram of a mechanical assembly with a bolt and spiral component, enclosed in a circle (no text or labels)

1 1 8 1 6 7

I x 4PCS

STEP 11

D 2 7 6 8

D x 4PCS

STEP 12 A E F 180° A x 4PCS E x 2PCS F x 2PCS STEP 13 ① B B B ② B ③ ④ ⑤ ⑥ ⑦ ⑧ B x 4PCS 1 2 3 >90°

STEP 14

T S ① T ⑦ S x 2PCS 7 x 2PCS

	S×2PCS
	T×2PCS

STEP 15

WALL

	C×2PCS
	O×4PCS
	T×2PCS

STEP 16

WALL

Simple line drawing of a sword and shield inside a circle, no text or symbols present

Abstract line drawing of a human head with a curved arrow and 'U' label, enclosed in a circle (no text or symbols beyond the label)

Diagram of a mechanical linkage or tool with labeled component 'U' (no text or symbols beyond the label)

U C C 7 6 8

C

	C×2PCS
	U×2PCS

STEP 17 C C C x 4PCS STEP 18 15 13 STEP 19 A x 4PCS G x 2PCS H x 1PC

STEP 20

STEP 21 K L x 2PCS R x 2PCS STEP 22 18 16 x2 STEP 23 K 18 16 x2 K x 4PCS

STEP 24

17 16 x2

STEP 25

K

17 K 16 x2

K × 4PCS

STEP 26

G

16 G x2 H

			G x 4PCS
			H x 2PCS

STEP 27

1 2 3 4 5 6 7 8 9 10 11

STEP 28

6 7 M3 M3 N 16 N M3

	M3 x 2PCS
	N x 2PCS

STEP 29

6 7 17

STEP 30

6 7 16 K K x 2PCS

K x 2PCS

STEP 31

M3 M3 N 16 N 6 N M3

	M3 x 2PCS
	N x 2PCS

STEP 32

6 17

STEP 33

K 6 16 K x 2PCS

K x 2PCS

COMPLETION

Isometric line drawing of a multi-level server cabinet with mesh panels and mounting feet (no text or symbols)

Tillverkare: Shanghaimuxinmuyeyouxiangongsi

Adress: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200 000 CN.

Importerad till AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOC NSW 2122 Australien

Importerad till USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support