HZS007 - Storage furniture Vevor - Free user manual and instructions

USER MANUAL HZS007 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

RATTAN SHOE CABINET USER MANUAL

MODEL NO.: HZS007

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to co all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually Saving Half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

Rattan Shoe Cabinet

MODEL NO.: HZS007

Isometric line drawing of a dual-chamber cabinet with mesh panels and metal railings (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate

www.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of o user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you ag there are any technology or software updates on our product.

WARNING:

Please read this manual carefully before using the product. Failure do so may result in serious injury.

ASSEMBLY PRECAUTIONS

1. Assemble only according to these instructions. Improper assembly c create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
3. Keep the assembly area clean and well-lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or when under the influence of alcohol drugs or medication.
6. The product capabilities apply to properly and completely assembled products only.
7. Assemble on a flat, level, hard and smooth surface capable of sa supporting the Rattan Shoe Cabinet.
8. For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unwrap separate all parts in a clean work area.

SAVE THESE INSTRUCTIONS

USE PRECAUTIONS

TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:

1. This product is not a toy Do not allow children to play with or r item.
2. Do not exceed weight capacities, before moving.
3. Use only on a flat, hard and smooth surface capable of safely supporting a fully loaded Rattan Shoe Cabinet.
4. Use as intended only.

Inspect before every use; do not use if parts are loose or damaged.

TECHNICAL SPECIFICATIONS

Model	HZS007
Product Dimensions (LxWxH)(mm)	1040*240*880
Net Weight(kg)	About 25.45

*Products such as specifications, appearance, and design are subject to modification without prior notice.

Technical diagram of a multi-panel installation with numbered components, including panel 1, panel 2, and grid-patterned panel.

A		B		C		D		E
M6x35mm	8+1PCS	∅15x9mm	8+1PCS	M4x40mm	22+2PCS	∅6x30mm	14+1PCS	M3.5x12mm	8+1PCS
F		G		H		I I1 I2 I3
96mm	4PCS	M6mm	4PC	M6x30mm	8+1PCS				8+1PCS
J		K				M		N
M3.5x14mm	48+2PCS	M4x10mm	8+1PCS			∅6x30mm	4PCS	∅12mm	8+1PCS
O		P		Q		R		S
M4mm	1PC	M3x14mm	2PCS

STEP 1 I2 I1 I2 I1 3 I2 I1 I2 I1 4 I1 I2 I1 I2 I1 I2 I1 I2 I1 I2 I1 I2 I1 I2 180° I1 I2 I1 I2 I1 I2 I1 x 8PCS I2 x 8PCS

STEP 2

C M M 5 C M M 6 2 C

STEP 3

C N C N C C 3 6 5 2 4 90°

	C×8PCS
	N×8PCS

STEP 4

D D D ② ③ ④

D x 6PCS

STEP 5

C

C C 7 C 2 3 4

STEP 6

H H 9 H 7 H 3 2 4 O

H O

	H×4PCS
	○×1PC

STEP 7 8 H H H 3 2 4 H O H x 4PCS O x 1PC

STEP 8

G

G G G 7 3 2 4 180°

G × 4PCS

STEP 9

D D D D ② ③ ④ ⑦

D x 8PCS

STEP 10 A A A A 1 A A x 8PCS STEP 11 B x 8PCS 1 B B B B 4 2 3 7 1 2 3 >90°

STEP 12

Q P 1 Q Q 4 7

	P×2PCS
[YKDS]	Q×2PCS

STEP 13

WALL

	C×2PCS
	M×4PCS
	Q×2PCS

STEP 14

WALL

Simple line drawing of a hammer and sickle with a magnified view, enclosed in a circle (no text or symbols)

Abstract line drawing of a human head with a curved arrow and a letter 'S' inside, enclosed in a circle (no text or symbols beyond the graphic elements)

Simple line drawing of a mechanical lever or tool inside a circle, with no text or symbols present.

S C S C ② ④ ③

C

	C×2PCS
	S×2PCS

STEP 15

Diagram showing a screw with a hook and a labeled 'J' symbol, likely illustrating a mechanical or electrical concept.

L J R J J J 10 x4

	J×24PCS
	L×4PCS
	R×4PCS

STEP 16

12 10 x4

STEP 17

J

12 10 x4

J × 8PCS

STEP 18

11 10 x4

STEP 19

J

Technical line drawing of a mechanical housing or enclosure with labeled components (J, 10, x4), no readable text or symbols beyond labels.

J x 8PCS

STEP 20

E

10 E F x4

	E x 8PCS
	F x 4PCS

STEP 21

1 2 3 4 I3 K I3 K K 10 I3 K

	13 x 2PCS
	K x 2PCS

STEP 22

Technical diagram of a multi-level industrial storage unit with numbered components and a directional arrow indicating movement or force.

STEP 23

Technical diagram of a cabinet with numbered components and a magnified view showing assembly details.

J × 2PCS

STEP 24

1 2 3 4 I3 K I3 K 10 I3 K K

	13 x 2PCS
	K x 2PCS

STEP 25

Technical diagram of a modular heating unit with numbered components and a directional arrow indicating movement or force.

STEP 26

Technical diagram of a modular device with numbered components and a magnified view showing assembly details.

J × 2PCS

STEP 27

1 2 3 4 I3 K I3 K I3 K 10 K I3 K

	13×2PCS
	K×2PCS

STEP 28

1 11 3

STEP 29

1 J 3 10 J

J × 2PCS

STEP 30

1 I3 K I3 10 K I3 K 3

	13×2PCS
	K×2PCS

STEP 31

Technical diagram of a modular air duct system with labeled components and numbered parts

STEP 32

Technical diagram of a mechanical device with labeled components and a magnified inset showing a threaded fastener assembly.

J × 2PCS

COMPLETION

Line drawing of a multi-level cabinet or enclosure with mesh panels and drawers, no text or symbols present

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Isometric line drawing of a four-tiered cabinet or rack unit with mesh panels and metal railings (no text or symbols)

BESOIN D'AIDE ? CONTACTEZ-NOUS!

Technical diagram of a multi-panel installation with numbered components, likely for architectural or engineering purposes.

A		B		C		D		E
M6x35mm	8+1PCS	∅15x9mm	8+1PCS	M4x40mm	22+2PCS	∅6x30mm	14+1PCS	M3.5x12mm	8+1PCS
F		G		H		I
96mm	4PCS	M6mm	4PC	M6x30mm	8+1PCS	I1	I2	I3
								8+1PCS
J		K		I		M		N
M3.5x14mm	48+2PCS	M4x10mm	8+1PCS			∅6x30mm	4PCS	∅12mm	8+1PCS
O		P		Q		R		S
M4mm	1PC	M3x14mm	2PCS

STEP 1 I2 I1 I2 I1 3 I2 I1 I2 I1 4 I1 I2 I1 I2 I1 I2 I1 I2 I1 I2 I1 I2 I1 I2 180° I1 I2 I1 I2 I1 I2 I1 x 8PCS I2 x 8PCS

STEP 2

C M M 5 C M M 6 2 C

STEP 3

C N C N C C 3 6 5 2 4 90°

	C×8PCS
	N×8PCS

D x 6PCS

STEP 6

H H 9 H 7 H 3 2 4 O

H O

	H×4PCS
	○×1PC

STEP 7 8 H H H 3 2 4 H O H x 4PCS O x 1PC

STEP 8

G

G G G 7 3 2 4 180°

G × 4PCS

STEP 9

D D D D ② ④ ③ ⑦

D x 8PCS

STEP 10 A A A A 1 A A x 8PCS STEP 11 B x 8PCS 1 B B B B 4 2 3 7 1 2 3 >90°

STEP 12

Q P 1 Q Q 4 7

	P×2PCS
	Q×2PCS

STEP 13

WALL

	C×2PCS
	M×4PCS
	Q×2PCS

STEP 14

WALL

Simple line drawing of a hammer and sickle with a magnifying glass, enclosed in a circle (no text or symbols)

Abstract line drawing of a human head with a curved arrow and a letter 'S' inside, enclosed in a circle (no text or symbols beyond the graphic elements)

Simple line drawing of a mechanical lever or tool inside a circle, with no text or symbols present.

S C S C ② ④ ③

C

	C×2PCS
	S×2PCS

STEP 15

Diagram showing a screw with a hook and a labeled 'J' symbol, likely illustrating a mechanical or electrical concept.

L J R J J J 10 x4

	J×24PCS
	L×4PCS
	R×4PCS

STEP 16

12 10 x4

STEP 17

J

12 10 x4

J × 8PCS

STEP 18

11 10 x4

STEP 19

J

Technical line drawing of a mechanical housing or enclosure with labeled components (J, 10, x4) and no readable text or symbols beyond labels.

J x 8PCS

STEP 20

E

10 E F x4

	E x 8PCS
	F x 4PCS

STEP 21

1 2 3 4 I3 K I3 K K 10 I3 K

	13 x 2PCS
	K x 2PCS

STEP 22

Technical diagram of a multi-level cabinet with numbered components and a directional arrow indicating movement or force.

STEP 23

Technical diagram of a mechanical assembly with numbered components and a magnified view showing a threaded fastener labeled 'J'.

J × 2PCS

STEP 24

1 2 3 4 I3 K I3 K 10 I3 K K

	13×2PCS
	K×2PCS

STEP 25

Technical diagram of a modular heating unit with numbered components and a directional arrow indicating movement or force.

STEP 26

Technical diagram of a modular device with numbered components and a magnified view showing assembly details.

J × 2PCS

STEP 27

1 2 3 4 I3 K I3 K I3 K 10 K I3 K

	13×2PCS
	K×2PCS

STEP 28

1 11 3

STEP 29

1 J 3 10 J

J × 2PCS

STEP 30

1 I3 K I3 10 K I3 K 3

	13×2PCS
	K×2PCS

STEP 31

Technical diagram of a modular air duct system with labeled components and numbered parts

STEP 32

Technical diagram of a mechanical device with labeled components and a magnified inset showing a threaded fastener assembly.

J × 2PCS

COMPLETION

Line drawing of a multi-level cabinet with mesh panels and drawers (no text or symbols)

Fabricant : Shanghaimuxinmuyeyouxiangongsi

Adresse : Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai 200 000 CN.

Importé en Australie : SIHAO PTY LTD. 1 RUE ROKEVAASTWOOD NSW 2122 Australie

Lieu, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

RATTAN-SCHUHSCHRANK

BENUTZERHANDBUCH

MODELL NR.: HZS007

Isometric line drawing of a four-tiered cabinet or rack unit with mesh panels and metal railings (no text or symbols)

www.vevor.com/support

Technical diagram of a multi-panel installation with numbered components, likely for architectural or engineering purposes.

A		B		C		D		E
M6x35mm	8+1PCS	∅15x9mm	8+1PCS	M4x40mm	22+2PCS	∅6x30mm	14+1PCS	M3.5x12mm	8+1PCS
F		G		H		I
96mm	4PCS	M6mm	4PC	M6x30mm	8+1PCS	I1	I2	I3
								8+1PCS
J		K				M		N
M3.5x14mm	48+2PCS	M4x10mm	8+1PCS			∅6x30mm	4PCS	∅12mm	8+1PCS
O		P		Q		R		S
M4mm	1PC	M3x14mm	2PCS

STEP 1 I2 I1 I2 I1 3 I2 I1 I2 I1 4 I1 I2 I1 I2 I1 I2 I1 I2 I1 I2 I1 I2 I1 I2 180° I1 I2 I1 I2 2 I1 x 8PCS I2 x 8PCS

STEP 3

C N C N C C 3 6 5 2 4 90°

	C×8PCS
	N×8PCS

D x 6PCS

STEP 6

H H 9 H 7 H 3 2 4 O

H O

	H×4PCS
	○×1PC

STEP 7 8 H H H 3 2 4 H O H x 4PCS O x 1PC

STEP 8

G

G G G 7 3 2 4 180°

G × 4PCS

STEP 9

D D D D ② ④ ③ ⑦

D x 8PCS

STEP 12

Q P 1 Q Q 4 7

	P×2PCS
(3652)	Q×2PCS

STEP 13

WALL

	C×2PCS
	M×4PCS
	Q×2PCS

STEP 14

WALL

Simple line drawing of a hammer and sickle with a magnified view, enclosed in a circle (no text or symbols)

Abstract line drawing of a human head with a curved arrow and a letter 'S' inside, enclosed in a circle (no text or symbols beyond the graphic elements)

Simple line drawing of a mechanical lever or tool inside a circle, with no text or symbols present.

S C S C ② ④ ③

C

	C×2PCS
	S×2PCS

STEP 15

Diagram showing a screw with a hook and a labeled 'J' symbol, likely illustrating a mechanical or electrical concept.

L J R J J 10 x4

	J×24PCS
	L×4PCS
	R×4PCS

STEP 16

12 10 x4

STEP 17

J

12 10 x4

J × 8PCS

STEP 18

11 10 x4

STEP 19

J

Technical line drawing of a mechanical housing or enclosure with labeled components (J, 10, x4), no readable text or symbols beyond labels.

J x 8PCS

STEP 20

E

10 E F x4

	E x 8PCS
	F x 4PCS

STEP 21

1 2 3 4 I3 K I3 K K 10 I3 K

	13 x 2PCS
	K x 2PCS

STEP 22

Technical diagram of a multi-level cabinet with numbered components and a directional arrow indicating movement or force.

STEP 23

Technical diagram of a cabinet with numbered components and a magnified view showing assembly details.

J × 2PCS

STEP 24

1 2 3 4 I3 K I3 K 10 I3 K K

	13 x 2PCS
	K x 2PCS

STEP 25

Technical diagram of a modular heating unit with numbered components and a directional arrow indicating movement or force.

STEP 26

Technical diagram of a modular device with numbered components and a magnified view showing assembly details.

J × 2PCS

STEP 27

1 2 3 4 I3 K I3 K I3 K 10 K I3 K

	13×2PCS
	K×2PCS

STEP 28

1 11 3

STEP 29

1 J 3 10 J

J × 2PCS

STEP 30

1 3 I3 K I3 10 K I3 K

	13×2PCS
	K×2PCS

STEP 31

Technical diagram of a modular air duct system with labeled components and numbered parts

STEP 32

Technical diagram of a multi-compartment electrical cabinet with labeled components and a magnified view showing a wire being inserted into a terminal.

J × 2PCS

COMPLETION

Line drawing of a multi-level cabinet with mesh panels and drawers (no text or symbols)

Hersteller: Shanghaimuxinmuyeyouxiangongsi

Adresse: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai, 200.000 CN.

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

SCARPIERA IN RATTAN

MANUALE D' USO

MODELLO N.: HZS007

Isometric line drawing of a dual-chamber cabinet with mesh panels and metal railings (no text or symbols)

Technical diagram of a multi-panel installation with numbered components, likely for architectural or engineering purposes.

A		B		C		D		E
M6x35mm	8+1PCS	∅15x9mm	8+1PCS	M4x40mm	22+2PCS	∅6x30mm	14+1PCS	M3.5x12mm	8+1PCS
F		G		H		I
96mm	4PCS	M6mm	4PC	M6x30mm	8+1PCS	I1	I2	I3
								8+1PCS
J		K				M		N
M3.5x14mm	48+2PCS	M4x10mm	8+1PCS			∅6x30mm	4PCS	∅12mm	8+1PCS
O		P		Q		R		S
M4mm	1PC	M3x14mm	2PCS

STEP 1 I2 I1 I2 I1 3 I2 I1 I2 I1 4 I1 I2 I1 I2 I1 I2 I1 I2 I1 I2 I1 I2 I1 I2 180° I1 I2 I1 I2 2 I1 x 8PCS I2 x 8PCS

STEP 2

C M M 5 C M M 6 2 C

STEP 3

C N C N C C 3 6 5 2 4 90°

	C×8PCS
	N×8PCS

D x 6PCS

STEP 6

H H 9 H 7 H 3 2 4 O

H O

	H×4PCS
	○×1PC

STEP 7 8 H H H 3 2 4 H O H x 4PCS O x 1PC

STEP 8

G

G G G 7 3 2 4 180°

G × 4PCS

STEP 9

D D D D ② ④ ③ ⑦

D x 8PCS

STEP 12

Q P 1 Q 4 7

	P×2PCS
(T32D)	Q×2PCS

STEP 13

WALL

	C×2PCS
	M×4PCS
	Q×2PCS

STEP 14

WALL

Simple line drawing of a hammer and sickle with a magnified view, enclosed in a circle (no text or symbols)

Abstract line drawing of a human head with a curved arrow and a letter 'S' inside, enclosed in a circle (no text or symbols beyond the graphic elements)

Simple line drawing of a mechanical lever or tool inside a circle, with no text or symbols present.

S C S C ② ④ ③

C

	C×2PCS
	S×2PCS

STEP 15

Diagram showing a screw with a hook and a labeled 'J' symbol, likely illustrating a mechanical or electrical concept.

L J R J J 10 x4

	J×24PCS
	L×4PCS
	R×4PCS

STEP 16

12 10 x4

STEP 17

J

12 10 x4

J × 8PCS

STEP 18

11 10 x4

STEP 19

J

Technical line drawing of a mechanical housing or enclosure with labeled components (J, 10, x4), no readable text or symbols beyond labels.

J x 8PCS

STEP 20

E

10 E F x4

	E x 8PCS
	F x 4PCS

STEP 21

1 2 3 4 I3 K I3 K K 10 I3 K

	13 x 2PCS
	K x 2PCS

STEP 22

Technical diagram of a multi-level cabinet with numbered components and a directional arrow indicating movement or force.

STEP 23

Technical diagram of a cabinet with numbered components and a magnified view showing assembly details.

J × 2PCS

STEP 24

1 2 3 4 I3 K I3 K 10 I3 K K

	13 x 2PCS
	K x 2PCS

STEP 25

Technical diagram of a modular heating unit with numbered components and a directional arrow indicating movement or force.

STEP 26

Technical diagram of a modular device with numbered components and a magnified view showing assembly details.

J × 2PCS

STEP 27

1 2 3 4 I3 K I3 K I3 K 10 K I3 K

	13×2PCS
	K×2PCS

STEP 28

1 11 3

STEP 29

1 J 3 10 J

J × 2PCS

STEP 30

1 I3 K I3 10 K I3 K 3

	13×2PCS
	K×2PCS

STEP 31

Technical diagram of a modular air duct system with labeled components and numbered parts

STEP 32

Technical diagram of a mechanical device with labeled components and a magnified inset showing a threaded fastener assembly.

J × 2PCS

COMPLETION

Line drawing of a multi-level cabinet with mesh panels and drawers (no text or symbols)

Importato in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122Australia

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

ZAPATERO DE RATÁN

MANUAL DE USUARIO

N.° DE MODELO: HZS007

Isometric line drawing of a four-tiered cabinet or rack unit with mesh panels and metal railings (no text or symbols)

Technical diagram of a multi-panel installation with numbered components, likely for architectural or engineering purposes.

A		B		C		D		E
M6x35mm	8+1PCS	∅15x9mm	8+1PCS	M4x40mm	22+2PCS	∅6x30mm	14+1PCS	M3.5x12mm	8+1PCS
F		G		H		I I1 I2 I3
96mm	4PCS	M6mm	4PC	M6x30mm	8+1PCS				8+1PCS
J		K				M		N
M3.5x14mm	48+2PCS	M4x10mm	8+1PCS		4PCS	∅6x30mm	4PCS	∅12mm	8+1PCS
O		P		Q		R		S
M4mm	1PC	M3x14mm	2PCS		4PCS		4PCS		2PCS

STEP 1 I2 I1 I2 I1 3 I2 I1 I2 I1 4 I1 I2 I1 I2 I2 I1 I2 I2 I1 I2 I1 I2 I1 ② I1 ② I1 180° I1 ② I1 I1 x 8PCS I2 x 8PCS

STEP 2

C M M 5 C M M 6 2 C

STEP 3

C N C N C C 3 6 5 2 4 90°

	C×8PCS
	N×8PCS

D x 6PCS

STEP 6

H H 9 H 7 H 3 2 4 O

H O

	H×4PCS
	○×1PC

STEP 7 8 H H H 3 2 4 H O H x 4PCS O x 1PC

STEP 8

G

G G G 7 3 2 4 180°

G × 4PCS

STEP 9

D D D D ② ③ ④ ⑦

D x 8PCS

STEP 12

Q P 1 Q Q 4 7

	P×2PCS
	Q×2PCS

STEP 13

WALL

	C×2PCS
	M×4PCS
	Q×2PCS

STEP 14

WALL

Simple line drawing of a hammer and sickle with a magnifying glass, enclosed in a circle (no text or symbols)

Abstract line drawing of a human head with a curved arrow and a letter 'S' inside, enclosed in a circle (no text or symbols beyond the graphic elements)

Simple line drawing of a mechanical lever or tool inside a circle, no text or symbols present

S C S C ② ④ ③

C

	C×2PCS
	S×2PCS

STEP 15

Diagram showing a screw with a hook and a labeled 'J' symbol, likely illustrating a mechanical or electrical concept.

L J R J J 10 x4

	J×24PCS
	L×4PCS
	R×4PCS

STEP 16

12 10 x4

STEP 17

J

12 10 x4

J × 8PCS

STEP 18

11 10 x4

STEP 19

J

Technical line drawing of a mechanical housing or enclosure with labeled components (J, 10, x4) and no readable text or symbols beyond labels.

J x 8PCS

STEP 20

E

10 E F x4

	E x 8PCS
	F x 4PCS

STEP 21

1 2 3 4 I3 K I3 K K 10 I3 K

	13 x 2PCS
	K x 2PCS

STEP 22

Technical diagram of a multi-level industrial machine with numbered components and a directional arrow indicating movement or force.

STEP 23

Technical diagram of a cabinet with numbered components and a magnified view showing assembly details.

J × 2PCS

STEP 24

1 2 3 4 I3 K I3 K 10 I3 K K

	13 x 2PCS
	K x 2PCS

STEP 25

Technical diagram of a modular heating unit with numbered components and a directional arrow indicating movement or force.

STEP 26

Technical diagram of a modular device with numbered components and a magnified view showing assembly details.

J × 2PCS

STEP 27

1 2 3 4 I3 K I3 K I3 K 10 K I3 K

	13×2PCS
	K×2PCS

STEP 28

1 11 3

STEP 29

1 J 3 10 J

J × 2PCS

STEP 30

1 3 I3 K I3 10 K I3 K

	13×2PCS
	K×2PCS

STEP 31

Technical diagram of a modular air duct system with labeled components and numbered parts

STEP 32

Technical diagram of a mechanical device with labeled components and a magnified inset showing a threaded fastener assembly.

J × 2PCS

COMPLETION

Line drawing of a multi-level cabinet with mesh panels and drawers (no text or symbols)

Fabricante: Shanghaimuxinmuyeyouxiangongsi

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

RATTANOWA SZAFKA NA BUTY PODREÇZNIK UŻYTKOWNIKA

NR MODELU: HZS007

Isometric line drawing of a four-tiered cabinet or rack unit with mesh panels and metal railings (no text or symbols)

POTRZEBUJESZ POMOCY? SKONTAKTUJ SIE Z NAMI!

www.vevor.com/support

Technical diagram of a multi-panel installation with numbered components, likely for architectural or engineering purposes.

A		B		C		D		E
M6x35mm	8+1PCS	∅15x9mm	8+1PCS	M4x40mm	22+2PCS	∅6x30mm	14+1PCS	M3.5x12mm	8+1PCS
F		G		H		I [DG GT]I1 I2 I3
96mm	4PCS	M6mm	4PC	M6x30mm	8+1PCS
J		K				M		N
M3.5x14mm	48+2PCS	M4x10mm	8+1PCS			∅6x30mm	4PCS	∅12mm	8+1PCS
O		P		Q		R		S
M4mm	1PC	M3x14mm	2PCS

STEP 1 I2 I1 I2 I1 3 I2 I1 I2 I1 4 I1 I2 I1 I2 I1 I2 I1 I2 I1 I2 I1 I2 I1 I2 180° I1 2 I1 x 8PCS I2 x 8PCS

STEP 2

C M M 5 C M M 6 2 C

STEP 3

C N C N C C 3 6 5 2 4 90°

	C×8PCS
	N×8PCS

D x 6PCS

STEP 6

H H 9 H 7 H 3 2 4 O

H O

	H×4PCS
	○×1PC

STEP 7 8 H H 3 2 4 H O H x 4PCS O x 1PC

STEP 8

G

G G G 7 3 2 4 180°

G × 4PCS

STEP 9

D D D D ② ④ ③ ⑦

D x 8PCS

©

STEP 12

Q P 1 Q 4 7

	P×2PCS
(772T)	Q×2PCS

STEP 13

WALL

	C×2PCS
	M×4PCS
	Q×2PCS

STEP 14

WALL

Simple line drawing of a hammer and sickle with a magnifying glass, enclosed in a circle (no text or symbols)

Abstract line drawing of a human head with a curved arrow and a letter 'S' inside, enclosed in a circle (no text or symbols beyond the graphic elements)

Simple line drawing of a mechanical lever or tool inside a circle, with no text or symbols present.

S C S C ② ④ ③

C

	C×2PCS
	S×2PCS

STEP 15

Diagram showing a screw with a hook and a labeled 'J' symbol, likely illustrating a mechanical or electrical concept.

L J R J J J 10 x4

	J×24PCS
	L×4PCS
	R×4PCS

STEP 16

12 10 x4

STEP 17

J

12 10 x4

J × 8PCS

STEP 18

11 10 x4

STEP 19

J

Technical line drawing of a mechanical housing or enclosure with labeled components (J, 10, x4), no readable text or symbols beyond labels.

J x 8PCS

STEP 20

E

10 E F x4

	E×8PCS
	F×4PCS

STEP 21

1 2 3 4 I3 K I3 K K 10 I3 K

	13 x 2PCS
	K x 2PCS

STEP 22

Technical diagram of a multi-level cabinet with numbered components and a directional arrow indicating movement or force.

STEP 23

Technical diagram of a cabinet with numbered components and a magnified view showing assembly details.

J × 2PCS

STEP 24

1 2 3 4 I3 K I3 K 10 I3 K K

	13 x 2PCS
	K x 2PCS

STEP 25

Technical diagram of a modular heating unit with numbered components and a directional arrow indicating movement or force.

STEP 26

Technical diagram of a modular device with numbered components and a magnified view showing assembly details.

J × 2PCS

STEP 27

1 2 3 4 I3 K I3 K I3 K 10 K I3 K

	13×2PCS
	K×2PCS

STEP 28

1 11 3

STEP 29

1 J 3 10 J

J × 2PCS

STEP 30

1 3 I3 K I3 10 K I3 K

	13×2PCS
	K×2PCS

STEP 31

Technical diagram of a multi-level industrial cabinet with labeled components and structural details

STEP 32

Technical diagram of a modular device with labeled components and a magnified inset showing a threaded fastener or spring mechanism.

J × 2PCS

COMPLETION

Line drawing of a multi-level cabinet with mesh panels and drawers (no text or symbols)

Producent: Shanghaimuxinmuyeyouxiangongsi

Adres: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Szanghaj 200000 CN.

Import do AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

ROTAN SCHOENENKAST

US E R HANDLEIDING

MODELNR.: HZS007

Isometric line drawing of a four-tiered cabinet or rack unit with mesh panels and metal railings (no text or symbols)

HULP NODIG? NEEM CONTACT MET ONS OP!

www.vevor.com/support

Technical diagram of a multi-panel installation with numbered components, likely for architectural or engineering purposes.

A		B		C		D		E
M6x35mm	8+1PCS	∅15x9mm	8+1PCS	M4x40mm	22+2PCS	∅6x30mm	14+1PCS	M3.5x12mm	8+1PCS
F		G		H		I
96mm	4PCS	M6mm	4PC	M6x30mm	8+1PCS	I1	I2	I3
								8+1PCS
J		K				M		N
M3.5x14mm	48+2PCS	M4x10mm	8+1PCS			∅6x30mm	4PCS	∅12mm	8+1PCS
O		P		Q		R		S
M4mm	1PC	M3x14mm	2PCS

STEP 1 I2 I1 I2 I1 3 I2 I1 I2 I1 4 I1 I2 I1 I2 I1 I2 I1 I2 I1 I2 I1 I2 I1 I2 180° I1 2 I1 x 8PCS I2 x 8PCS

STEP 2

C 5 C 6 2 C

STEP 3

C N C N C C 3 6 5 2 4 90°

	C×8PCS
	N×8PCS

D x 6PCS

STEP 6

H H 9 H 7 H 3 2 4 O

H O

	H×4PCS
	○×1PC

STEP 7 8 H H H 3 2 4 H O H x 4PCS O x 1PC

STEP 8

G

G G G 7 3 2 4 180°

G × 4PCS

STEP 9

D D D D ② ③ ④ ⑦

D x 8PCS

STEP 10 A A A A 1 A A x 8PCS STEP 11 B x 8PCS 1 B B B B 4 2 3 7 1 2 3 >90°

STEP 12

Q P 1 Q Q 4 7

	P×2PCS
	Q×2PCS

STEP 13

WALL

	C×2PCS
	M×4PCS
	Q×2PCS

STEP 14

WALL

Simple line drawing of a hammer and sickle with a magnifying glass, enclosed in a circle (no text or symbols)

Abstract line drawing of a human head with a curved arrow and a letter 'S' inside, enclosed in a circle (no text or symbols beyond the graphic elements)

Simple line drawing of a mechanical lever or tool inside a circle, with no text or symbols present.

S C S C ② ④ ③

C

	C×2PCS
	S×2PCS

STEP 15

Diagram showing a screw with a hook and a labeled 'J' symbol, likely illustrating a mechanical or electrical concept.

L J R J J 10 x4

	J×24PCS
	L×4PCS
	R×4PCS

STEP 16

12 10 x4

STEP 17

J

12 10 x4

J × 8PCS

STEP 18

11 10 x4

STEP 19

J

Technical line drawing of a mechanical housing or enclosure with labeled components (J, 10, x4) and no readable text or symbols beyond labels.

J x 8PCS

STEP 20

E

10 E F x4

	E x 8PCS
	F x 4PCS

STEP 21

1 2 3 4 I3 K I3 K K 10 I3 K

	13 x 2PCS
	K x 2PCS

STEP 22

Technical diagram of a multi-level cabinet with numbered components and a directional arrow indicating movement or force.

STEP 23

Technical diagram of a cabinet with numbered components and a magnified view showing assembly details.

J × 2PCS

STEP 24

1 2 3 4 I3 K I3 K 10 I3 K K

	13 x 2PCS
	K x 2PCS

STEP 25

Technical diagram of a modular heating unit with numbered components and a directional arrow indicating movement or force.

STEP 26

Technical diagram of a modular device with numbered components and a magnified view showing assembly details.

J × 2PCS

STEP 27

1 2 3 4 I3 K I3 K I3 K 10 K I3 K

	13×2PCS
	K×2PCS

STEP 28

1 11 3

©

STEP 30

1 I3 K I3 10 K I3 K 3

	13×2PCS
	K×2PCS

STEP 31

Technical diagram of a multi-level industrial cabinet with labeled components and structural details

STEP 32

Technical diagram of a modular device with labeled components and a magnified inset showing a threaded fastener or spring mechanism.

J × 2PCS

Fabrikant: Shanghaimuxinmuyeyouxiangongsi

Adres: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai 200.000 CN.

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

SKOSKÅP I ROTTING

A R MANUAL

MODELLNR: HZS007

Isometric line drawing of a dual-chamber HVAC unit cabinet with mesh panels (no text or symbols)

BEHÖVER HJÄLP? KONTAKTA OSS!

www.vevor.com/support

Technical diagram of a multi-panel installation with numbered components, likely for architectural or engineering purposes.

A		B		C		D		E
M6x35mm	8+1PCS	∅15x9mm	8+1PCS	M4x40mm	22+2PCS	∅6x30mm	14+1PCS	M3.5x12mm	8+1PCS
F		G		H		I I1 I2 I3
96mm	4PCS	M6mm	4PC	M6x30mm	8+1PCS				8+1PCS
J		K				M		N
M3.5x14mm	48+2PCS	M4x10mm	8+1PCS			∅6x30mm	4PCS	∅12mm	8+1PCS
O		P		Q		R		S
M4mm	1PC	M3x14mm	2PCS

STEP 1 I2 I1 I2 I1 3 I2 I1 I2 I1 4 I1 I2 I1 I2 I1 I2 I1 I2 I1 I2 I1 I2 I1 I2 180° I1 2 I1 x 8PCS I2 x 8PCS

STEP 2

C M M 5 C M M 6 2 C

STEP 3

C N C N C C 3 6 5 2 4 90°

	C×8PCS
	N×8PCS

D x 6PCS

STEP 6

H H 9 H 7 H 3 2 4 O

H O

	H×4PCS
	○×1PC

STEP 7 8 H H 3 2 4 H O H x 4PCS O x 1PC

STEP 8

G

G G G 7 3 2 4 180°

G × 4PCS

STEP 9

D D D D ② ④ ③ ⑦

D x 8PCS

STEP 10 A A A A 1 A A x 8PCS STEP 11 B x 8PCS 1 B B B B 4 2 3 7 1 2 3 >90°

STEP 12

Q P 1 Q 4 7

	P×2PCS
	Q×2PCS

STEP 13

WALL

	C×2PCS
	M×4PCS
	Q×2PCS

STEP 14

WALL

Simple line drawing of a hammer and sickle with a magnified view, enclosed in a circle (no text or symbols)

Abstract line drawing of a human head with a curved arrow and a letter 'S' inside, enclosed in a circle (no text or symbols beyond the graphic elements)

Simple line drawing of a mechanical lever or tool inside a circle, with no text or symbols present.

S C S C ② ④ ③

C

	C×2PCS
	S×2PCS

STEP 15

Diagram showing a screw with a hook and a labeled 'J' symbol, likely illustrating a mechanical or electrical concept.

L J R J J 10 x4

	J×24PCS
	L×4PCS
	R×4PCS

STEP 16

12 10 x4

STEP 17

J

12 10 x4

J × 8PCS

STEP 18

11 10 x4

STEP 19

J

Technical line drawing of a mechanical housing or enclosure with labeled components (J, 10, x4) and no readable text or symbols beyond labels.

J x 8PCS

STEP 20

E

10 E F x4

	E x 8PCS
	F x 4PCS

STEP 21

1 2 3 4 I3 K I3 K K 10 I3 K

	13×2PCS
	K×2PCS

STEP 22

Technical diagram of a multi-level cabinet with numbered components and a directional arrow indicating movement or force.

STEP 23

1 2 3 4 J J 10 J

J × 2PCS

STEP 24

1 2 3 4 I3 K I3 K 10 I3 K K

	13 x 2PCS
	K x 2PCS

STEP 25

Technical diagram of a modular heating unit with numbered components and a directional arrow indicating movement or force.

STEP 26

Technical diagram of a modular device with numbered components and a magnified view showing assembly details.

J × 2PCS

STEP 27

1 2 3 4 I3 K I3 K I3 K 10 K I3 K

	13×2PCS
	K×2PCS

STEP 28

1 11 3

STEP 29

1 J 3 10 J

J × 2PCS

STEP 30

1 3 I3 K I3 10 K I3 K

	13×2PCS
	K×2PCS

STEP 31

Technical diagram of a modular air duct system with labeled components and numbered parts

STEP 32

Technical diagram of a modular device with labeled components and a magnified inset showing a threaded fastener or spring mechanism.

J × 2PCS

COMPLETION

Line drawing of a multi-level cabinet or rack unit with mesh panels and drawers (no text or symbols)

Tillverkare: Shanghaimuxinmuyeyouxiangongsi

Adress: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200 000 CN.

Importerad till AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOC NSW 2122 Australien

Importerad till USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support