IVY-VVR-005 - Wardrobe Vevor - Free user manual and instructions

USER MANUAL IVY-VVR-005 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

KIDS STORAGE COMPARTMENTS

MODEL: IVY-VVR-005

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represent estimate of savings you might benefit from buying certain tools with us compared top brands and does not necessarily mean to cover all categories of tools offered are kindly reminded to verify carefully when you are placing an order with us actually saving half in comparison with the top major brands.

MODEL: IVY-VVR-005

Isometric line drawing of a multi-tiered storage cabinet or shelf unit (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel from contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instruction carefully before operating. VEVOR reserves a clear interpretation user manual. The appearance of the product shall be subject to product you received. Please forgive us that we won't inform you there are any technology or software updates on our product.

Warning-To reduce the risk of injury, user must read instructi manual carefully.

SAFETY WARNINGS AND PRECAUTIONS

Thank you for using this product. In order to make sure that you can operate the machine correctly, read this instruction carefully before operation and keep it properly for future reference. Please be sure to the precautions and safety rules on this page to ensure your safe use manual will outline safety warnings and precautions, operating, maintenance and cleaning. The warnings and instructions reviewed in manual cannot cover all possible conditions and situations that may of Caution and common sense are not built into this product, since we that the uses will comply with these codes.

Please read ALL the instructions before using your machine.

1. Assemble needs to follow these instructions. Incorrect assembly can a hazard.

2. Wear safety goggles and heavy-duty work gloves during assembly.

3. Do not assemble when tired or when under the influence of alcohol drugs or medication.

4. Weight and other product properties only apply to correctly and completely assembled products.

5. Keep the assembly area clean and well-lit.

6. Keep bystanders out of the area during assembly.

7. This product is not a toy.

8. Use as intended only. Do not sit or stand on the product.

9. Inspect before every use. Do not use it if parts are loose or dan

10. For indoor use only.

11. Do not exceed the listed weight capacity. Tighten all knobs secure before applying load. Be aware of dynamic loading! The sudden load movement may briefly create an excess load, causing product failure.

12. Do not apply this unit to any other purposes than the indicated

13. Do not use it outdoors or for commercial purposes. INDOOR USI ONLY.

14. DO NOT CLEAN IT WITH ANY ABRASIVE MATERIAL.
15. Never leave it unattended while in use.
16. Pay attention to hand injuries caused by drawer pinching!
17. Do not place the product on or near hot air, electric burners or
18. Do not place it in a damp environment.
19. The product should be placed on a flat surface.

⚠ WARNING: TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:

1. Attention: An anti-tipping device must be installed to securely secure the product to the wall (Ensure the reliability of the wall
2. This appliance is not intended for use by young or infirm people unless supervised by a responsible person to ensure that they can use the appliance safely. Young children should be supervised to ensure that they do not play with the product.

PRODUCT PARAMETERS

Model	IVY-VVR-005
Storage grid number	5 grids2 grids : 426*367*360mm3 grids : 280*242*260mm
Product Dimensions (L*W*H)	890*400*760mm (35*16*30in)
Packing Size (L*W*H)	990*470*130mm
Net Weight (kg)	15.5
Gross Weight (kg)	17.1

ASSEMBLY ATTENTION

1. Please dispose of all plastic bags carefully and keep them away 1 children and pets.
2. Check all components provided according to the list in this manual. Make sure you have all of the parts listed.
3. Although paying particular attention when manufacturing this product, you must be careful during the assembly process to avoid being scra by sharp edges.
4. Wear eye-protective goggles and protective gloves during assembly use.
5. The product should be placed on a flat surface.
6. The product requires two people to assemble.
7. The product requires the use of a Phillips screwdriver (cross screw needs to be purchased by oneself).
8. If uneven product gaps are found, they can be disassembled and adjusted.

Attention: An anti-tipping device must be installed to securely sec the product to the wall (Ensure the reliability of the wall itself).

PACKAGE CONTENTS

A ×28 Ø6×35mm B ×28 6×30mm C ×26 5×40mm D x9 E x12 F x12 3×14mm

Before starting assembly, please check if you have all the component listed. If you really find something missing, don't continue. Please con us

Note: the quantity of parts shown in the manual is the usage and the unused parts are spare parts.

STEP 1

A A A ①

A A ④

A A A A ⑧

A A A A A A ⑨

A ⑦

STEP 2

Technical diagram showing two labeled components (① and ②) with internal labels C, D, and dashed lines indicating alignment or assembly.

Technical line drawing of a structural frame with labeled points C and B, showing internal components and alignment (no text or symbols beyond labels)

C ⑥ D

STEP 5

STEP 6

Isometric line drawing of a 3D rectangular container with internal compartments and labeled points B (no text or symbols beyond labels)

B B E F X12

B ×8	E x12	F x12

In the interest of our environment please dispose of all packaging thoughtfully.

INSTRUCTIONS FOR USE

1. Please place it on a flat and spacious ground for use, do not place water or permeable surfaces, uneven or rough surfaces, slopes, etc.
2. Before use, please check whether all components are secure, when the product is shaking, and make adjustments.
3. During use, please regularly or irregularly check whether all compo are loose. If any, please tighten them in

FAULT ANALYSIS AND TROUBLESHOOTING

Fault phenomenon	Cause analysis	Exclusion method
Folding armchair shaking instability	1. The nuts were tightened during installation, and the components did not fit properly.2. The ground is uneven	1. Tighten the nuts and adjust the position of the components to ensure that they are securely installed.2. Use in a flat indoor environment.

Warning

1. Only adults are allowed to install and children are not allowed to approach.
2. Before use, please check whether the product is damaged.
3. If there is any damage, please do not use it. Please assemble and use it correctly according to the assembly sequence.
4. Please place the installation on a flat and spacious ground.
5. Please keep the packaging bag away in a timely manner to avoid indoor breathing caused by children playing with it.
6. Before use, please check whether all parts are installed in place and connected tightly.
7. Note: Use only under direct adult supervision. When cleaning, please use a soft cloth to wipe and keep this product away from fire.

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represent of savings you might benefit from buying certain tools with us compared top brands and does not necessarily mean to cover all categories of tools offered are kindly reminded to verify carefully when you are placing an order with us actually saving half in comparison with the top major brands.

Isometric line drawing of a multi-level storage cabinet or shelf unit (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel fr contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instruction carefully before operating. VEVOR reserves a clear interpretation user manual. The appearance of the product shall be subject to product you received. Please forgive us that we won't inform you there are any technology or software updates on our product.

SAFETY WARNINGS AND PRECAUTIONS

A ×28 Ø6×35mm B ×28 6x30mm C ×26 5x40mm D x9 E x12 F x12 3x14mm

Note: the quantity of parts shown in the manual is the usage and the unused parts are spare parts.

STEP 1

A A A ①

A A ④

A A A A ⑧

A A A A A A ⑨

A ⑦

STEP 2

Technical diagram showing two labeled components (① and ②) with internal labels C, D, and dashed lines indicating alignment or assembly.

Technical line drawing of a structural frame with mounting holes and a numbered component (no text or symbols)

C ×4 D ×4

STEP 4

Technical line drawing of a structural frame with labeled points C and B, showing internal components and alignment (no text or symbols beyond labels)

C ⑥ D

STEP 5

STEP 6

Isometric line drawing of a 3D rectangular container with internal compartments and labeled points B (no text or symbols beyond labels)

B B E F X12

B ×8	E x12	F x12

FAULT ANALYSIS AND TROUBLESHOOTING

STREETEASTWOOD NSW 2122 Australia

Importowane do USA: Sanven Technology Ltd., Suite 250, 9166 Anal

Place, Rancho Cucamonga, CA 91730

EC

REP

SHUNSHUN GmbH

Römeräcker 9 Z2021,76351

Unit 5 Albert Edward House, The

Pavilions Preston, United Kingdom

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only rep estimate of savings you might benefit from buying certain tools with us compared top brands and does not necessarily mean to cover all categories of tools offered are kindly reminded to verify carefully when you are placing an order with us actually saving half in comparison with the top major brands.

MODELL: IVY-VVR-005

Isometric line drawing of a multi-tiered storage cabinet or shelf unit (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel fr contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instruction carefully before operating. VEVOR reserves a clear interpretation user manual. The appearance of the product shall be subject to product you received. Please forgive us that we won't inform you there are any technology or software updates on our product.

SAFETY WARNINGS AND PRECAUTIONS

A ×28 Ø6×35mm B ×28 6x30mm C ×26 5x40mm D x9 E x12 F x12 3x14mm

Note: the quantity of parts shown in the manual is the usage and the unused parts are spare parts.

STEP 1

A A A ①

A A ④

A A A A ⑧

A A A A A A ⑨

A ⑦

STEP 2

Technical diagram showing two labeled components (① and ②) with internal labels C, D, and dashed lines indicating alignment or assembly.

Technical line drawing of a structural frame with mounting holes and a numbered component (no text or symbols)

C ×4 D ×4

STEP 4

Technical line drawing of a structural frame with labeled points C and B, showing internal components and alignment (no text or symbols beyond labels)

C ⑥ D

STEP 5

STEP 6

Isometric line drawing of a 3D rectangular container with internal compartments and labeled points B (no text or symbols beyond labels)

B B E F X12

B ×8	E x12	F x12

FAULT ANALYSIS AND TROUBLESHOOTING

Unit 5 Albert Edward House, The

Pavilions Preston, United Kingdom

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represent estimate of savings you might benefit from buying certain tools with us compared top brands and does not necessarily mean to cover all categories of tools offered are kindly reminded to verify carefully when you are placing an order with us actually saving half in comparison with the top major brands.

MODÈLE: IVY-VVR-005

Isometric line drawing of a multi-level storage cabinet or shelf unit (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel fr contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instruction carefully before operating. VEVOR reserves a clear interpretation user manual. The appearance of the product shall be subject to product you received. Please forgive us that we won't inform you there are any technology or software updates on our product.

SAFETY WARNINGS AND PRECAUTIONS

A ×28 Ø6×35mm B ×28 6x30mm C ×26 5x40mm D x9 E x12 F x12 3x14mm

Note: the quantity of parts shown in the manual is the usage and the unused parts are spare parts.

STEP 1

A A A ①

A A ④

A A A A ⑧

A A A A A A ⑨

A ⑦

STEP 2

Technical diagram showing two labeled components (① and ②) with internal labels C, D, and dashed lines indicating alignment or assembly.

Technical line drawing of a structural frame with mounting holes and a numbered component (no text or symbols)

C ×4 D ×4

STEP 4

Technical line drawing of a structural frame with labeled points C and B, showing internal components and alignment (no text or symbols beyond labels)

C ⑥ D

STEP 5

STEP 6

Isometric line drawing of a 3D rectangular container with internal compartments and labeled points B (no text or symbols beyond labels)

B B E F X12

B ×8 E x12 F x12

FAULT ANALYSIS AND TROUBLESHOOTING

Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

SHUNSHUN GmbH

Römeräcker 9 Z2021,76351

Unit 5 Albert Edward House, The

Pavilions Preston, United Kingdom

Fabriqué en Chine

VEVOR®

TOUGH TOOLS, HALF PRICE

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represent of savings you might benefit from buying certain tools with us compared top brands and does not necessarily mean to cover all categories of tools offered are kindly reminded to verify carefully when you are placing an order with us actually saving half in comparison with the top major brands.

MODEL: KLIMOP-VVR-005

Isometric line drawing of a multi-tiered storage cabinet or shelf unit (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel from contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instruction carefully before operating. VEVOR reserves a clear interpretation user manual. The appearance of the product shall be subject to product you received. Please forgive us that we won't inform you there are any technology or software updates on our product.

SAFETY WARNINGS AND PRECAUTIONS

A ×28 Ø6×35mm B ×28 6x30mm C ×26 5x40mm D x9 E x12 F x12 3x14mm

Note: the quantity of parts shown in the manual is the usage and the unused parts are spare parts.

INSTALLATION STEPS

STEP 1

A A A ①

A A ④

A A A A A ⑧

A A A A A A ⑨

A ⑦

STEP 2

① ② C D D D

Isometric line drawing of a structural frame with two panels and a numbered label (10), no text or symbols present.

C ×4 D ×4

STEP 4

Technical line drawing of a structural frame with labeled points C and B, showing internal components and alignment (no text or symbols beyond labels)

C ⑥ D

STEP 5

STEP 6

Isometric line drawing of a 3D rectangular container with internal compartments and labeled points B (no text or symbols beyond labels)

B B E F X12

B ×8	E x12	F x12

FAULT ANALYSIS AND TROUBLESHOOTING

Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

SHUNSHUN GmbH

Römeräcker 9 Z2021,76351

Unit 5 Albert Edward House, The

Pavilions Preston, United Kingdom

Gemaakt in China

VEVOR®

TOUGH TOOLS, HALF PRICE

Technisch Ondersteuning en E-garantiecertificaat www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

FÖRVARINGSFACK FÖR BARN

MODELL: IVY-VVR-005

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represent estimate of savings you might benefit from buying certain tools with us compared top brands and does not necessarily mean to cover all categories of tools offered are kindly reminded to verify carefully when you are placing an order with us actually saving half in comparison with the top major brands.

MODELL: IVY-VVR-005

Isometric line drawing of a multi-level storage cabinet or shelf unit (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel fr contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of user manual. The appearance of the product shall be subject to product you received. Please forgive us that we won't inform your use, there are any technology or software updates on our product.

SAFETY WARNINGS AND PRECAUTIONS

A ×28 Ø6×35mm B ×28 6x30mm C ×26 5x40mm D x9 E x12 F x12 3x14mm

Note: the quantity of parts shown in the manual is the usage and the unused parts are spare parts.

INSTALLATION STEPS

STEP 1

A A A ①

A A ④

A A A A A ⑧

A A A A A A ⑨

A ⑦

STEP 2

① ② C D C D D

Isometric line drawing of a structural frame with two panels and a numbered label (10), no text or symbols present.

C ×4 D ×4

STEP 4

Technical line drawing of a structural frame with labeled points C and B, showing internal components and alignment (no text or symbols beyond labels)

C ⑥ D

STEP 5

STEP 6

Isometric line drawing of a 3D rectangular container with internal compartments and labeled points B (no text or symbols beyond labels)

B B E F X12

B ×8	E x12	F x12

FAULT ANALYSIS AND TROUBLESHOOTING

Unit 5 Albert Edward House, The

Pavilions Preston, United Kingdom

Tillverkad i Kina

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represent of savings you might benefit from buying certain tools with us compared top brands and does not necessarily mean to cover all categories of tools offered are kindly reminded to verify carefully when you are placing an order with us actually saving half in comparison with the top major brands.

MODELO: IVY-VVR-005

Isometric line drawing of a multi-level storage cabinet or shelf unit (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel fr contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instruction carefully before operating. VEVOR reserves a clear interpretation user manual. The appearance of the product shall be subject to product you received. Please forgive us that we won't inform you there are any technology or software updates on our product.

SAFETY WARNINGS AND PRECAUTIONS

A ×28 Ø6×35mm B ×28 6x30mm C ×26 5x40mm D x9 E x12 F x12 3x14mm

Note: the quantity of parts shown in the manual is the usage and the unused parts are spare parts.

INSTALLATION STEPS

STEP 1

A A A ①

A A ④

A A A A A ⑧

A A A A A A ⑨

A ⑦

STEP 2

① ② C D D D

Isometric line drawing of a structural frame with two panels and a numbered label (10), no text or symbols present.

C ×4 D ×4

STEP 4

Technical line drawing of a structural frame with labeled points C and B, showing internal components and alignment (no text or symbols beyond labels)

C ⑥ D

STEP 5

STEP 6

Isometric line drawing of a 3D rectangular container with internal compartments and labeled points B (no text or symbols beyond labels)

B B E F X12

B ×8	E x12	F x12

FAULT ANALYSIS AND TROUBLESHOOTING

Importado a AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Importado a EE. UU.: Sanven Technology Ltd., Suite 250, 9166 Anal Place, Rancho Cucamonga, CA 91730

EC

REP

SHUNSHUN GmbH

Römeräcker 9 Z2021,76351

Unit 5 Albert Edward House, The

Pavilions Preston, United Kingdom

Hecho en china

VEVOR®

TOUGH TOOLS, HALF PRICE

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represent of savings you might benefit from buying certain tools with us compared top brands and does not necessarily mean to cover all categories of tools offered are kindly reminded to verify carefully when you are placing an order with us actually saving half in comparison with the top major brands.

MODELLO: EDERA-VVR-005

Isometric line drawing of a multi-tiered storage cabinet or shelf unit (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel from contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instruction carefully before operating. VEVOR reserves a clear interpretation user manual. The appearance of the product shall be subject to product you received. Please forgive us that we won't inform you there are any technology or software updates on our product.

SAFETY WARNINGS AND PRECAUTIONS

A ×28 Ø6×35mm B ×28 6x30mm C ×26 5x40mm D x9 E x12 F x12 3x14mm

Note: the quantity of parts shown in the manual is the usage and the unused parts are spare parts.

INSTALLATION STEPS

STEP 1

A A A ①

A A ④

A A A A A ⑧

A A A A A A ⑨

A ⑦

STEP 2

① ② C D C D D

Isometric line drawing of a structural frame with two panels and a numbered label (10), no text or symbols present.

C ×4 D ×4

STEP 4

Technical line drawing of a structural frame with labeled points C and B, showing internal components and alignment (no text or symbols beyond labels)

C ⑥ D

STEP 5

STEP 6

Isometric line drawing of a 3D rectangular container with internal compartments and labeled points B (no text or symbols beyond labels)

B B E F X12

B ×8 E x12 F x12

FAULT ANALYSIS AND TROUBLESHOOTING

Importato in AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Importato negli USA: Sanven Technology Ltd., Suite 250, 9166 Anah Place, Rancho Cucamonga, CA 91730

EC

REP

SHUNSHUN GmbH

Römeräcker 9 Z2021,76351

Unit 5 Albert Edward House, The

Pavilions Preston, United Kingdom

Made in China

VEVOR®

TOUGH TOOLS, HALF PRICE