J10032-33-FB - Wardrobe Vevor - Free user manual and instructions

USER MANUAL J10032-33-FB Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

TRIANGLE CORNER CABINET USER MANUAL

MODEL NO.: J10032-33-FB

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to co all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually Saving Half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

Triangle Corner Cabinet

MODEL NO.: J10032-33-FB

Line drawing of a double door cabinet with a triangular roof and two doors (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of o user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you ag there are any technology or software updates on our product.

WARNING:

Please read this manual carefully before using the product. Failure do so may result in serious injury.

Please read and observe carefully all the assembly instructions before beginning assembly.

Unit should be assembled by two or more people.

DO NOT CLIMB

Please do not let your child climb on the product. If y kids or animals who like to climb, we highly recomme using the wall anchors and brackets/straps that come the package.

ASSEMBLY PRECAUTIONS

1. Assemble only according to these instructions. Improper assembly c create hazards.

2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.

3. Keep the assembly area clean and well-lit.

4. Keep bystanders out of the area during assembly.

5. Do not assemble when tired or when under the influence of alcohol drugs or medication.

6. The product capabilities apply to properly and completely assembled products only.

7. Assemble on a flat, level, hard and smooth surface capable of sa supporting the Triangle Corner Cabinet.

8. For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unwrap separate all parts in a clean work area.

SAVE THESE INSTRUCTIONS

USE PRECAUTIONS

TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:

1. This product is not a toy Do not allow children to play with or r item.
2. Do not exceed weight capacities, before moving.
3. Use only on a flat, hard and smooth surface capable of safely supporting a fully loaded Triangle Corner Cabinet.
4. Use as intended only.
   Inspect before every use; do not use if parts are loose or damaged.

TECHNICAL SPECIFICATIONS

Model	J10032-33-FB
Product Dimensions (LxWxH)(mm)	645*325*845
Net Weight(kg)	About 15.3

*Products such as specifications, appearance, and design are subject to modification without prior notice.

PACKAGE CONTENTS

Technical diagram showing 13 numbered mechanical or structural components with numbered labels, likely for assembly or assembly instructions.

A[nw63]27X+2X	B∅1527X+2X	C∅8x30mm17X+1X	D∅5/32"×20mm2X
EST2.9×14mm8X	FST3.5*15mm14X +1X	G∅3.5×30mm[TDKS]2X	H2X
I2X	J4X	K2X	L27X+2X
M8X	N2X	O1X	P2X
QST3.5*16mm2X	R2X+4X	S2X+2X

ASSEMBLY STEPS

Step 1

A		2
G		2

A G G 4 A 5

Step 2

B		2
C		1
O		1
F		2

F F O F F O ⑤ C B B ③

Three-step diagram showing a door mechanism with labeled parts and directional arrows, likely illustrating a mechanical or electrical assembly.

Step 3

A A FF P 7 P A F F F F

A		2
F		4
P		2

Step 4

B		2
C		1

7 C B B ③

1 2 3

Step 5

A

6

A 10 A A 11 A A

Step 6

B		6
C		4

A A A' A ⑨

Step 8

B		4
C		2

Technical diagram of a mechanical assembly with numbered components and labeled parts (B, C)

1 2 3

Step 9

A A A A A C A C A C A ⑧ C

A		7
C		4

Step 10

Technical diagram of a mechanical assembly with labeled components and dimensions

B

4

1 2 3

Step 11

Diagram of a physics experiment setup with labeled components and motion indicators

Step 14

B		2
C		1

B 2 B C 1

1 2 3

Step 15

B		4
C		4

Simple line drawing of a door with a handle and circular arrow indicating direction (no text or symbols)

2 B

3

Step 16

M		8
L		29

graph TD
    A["Circle Node"] --> B["Node B"]
    C["L"] --> B

① ⑨ M ⑩ M ⑪ M ⑬ M ③ ⑥ ⑥

Step 17

D		2
E		4
F		4
H		1
I		1
K		2
N		2

F F N E E H D F F N ⑬ K F F N E E I ⑫ K

Step 18

1 9 3 J

① ⑧ ③

Step 19

Technical diagram of a cabinet or wardrobe assembly with numbered components and directional arrows indicating movement.

J		1
I		1

Step 20

E

2

① ③ ③ ⑪ ⑬ ⑬

Step 21

Diagram illustrating door assembly steps with numbered components and a magnified view of the interior panel.

J		1
H		1

Step 22

E

2

Technical diagram of a cabinet with numbered components and an inset view showing labeled parts H and E.

Step 23

Q		2
R		2
R		2

Technical diagram of a cabinet or enclosure with labeled components and connection points marked as R and Q.

Step 24

R 2 S 2 ||

Wall

Wall

① ③ ⑫ ⑬ ⑬

COMPLETION

Line drawing of a double door cabinet with a triangular roof and two doors (no text or symbols)

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Please read and observe carefully all the assembly instructions before beginning assembly.

Unit should be assembled by two or more people.

DO NOT CLIMB

Please do not let your child climb on the product. If y kids or animals who like to climb, we highly recomme using the wall anchors and brackets/straps that come the package.

Technical diagram showing 13 numbered mechanical or structural components with numbered labels, likely for assembly or assembly instructions.

A[65AC]27X+2X	B∅1527X+2X	C∅8x30mm17X+1X	D∅5/32"×20mm2X
EST2.9×14mm8X	FST3.5*15mm14X +1X	G∅3.5×30mm2X	H2X
I[DIHYG]2X	J4X	K2X	L27X+2X
M8X	N2X	O1X	P2X
QST3.5*16mm2X	R2X+4X	S2X+2X

ASSEMBLY STEPS

Step 1

A		2
G		2

A G G 4 A 5

Step 2

B		2
C		1
O		1
F		2

F F O F F O ⑤ C B B ③

1 2 3

Step 3

A A FF P 7 P A F F F F

A		2
F		4
P		2

Step 4

B		2
C		1

7 C B B ③

Diagram showing three steps of a door opening process with labeled parts and directional arrows

Step 5

A

6

A 10 A A 11 A A

Step 6

B		6
C		4

A A A A' ⑨

Step 8

B		4
C		2

A C A A A A A A C 8 C

A		7
C		4

Step 10

Technical diagram of a mechanical assembly with labeled components and dimension lines

B

4

1 2 3

Step 11

Diagram of a physics experiment setup with labeled components and motion indicators

Step 14

B		2
C		1

B 2 B C 1

1 2 3

Step 15

B		4
C		4

Simple line drawing of a door with a handle and circular arrow indicating direction (no text or symbols)

2 B

3

Step 16

M		8
L		29

graph TD
    A["Circle Node"] --> B["Node B"]
    C["L"] --> B

① ⑨ ③ ⑥ ⑥

Step 17

D		2
E		4
F		4
H		1
I		1
K		2
N		2

F F N E E H D F F N ⑬ K F F N E E I ⑫ K

Step 18

1 9 3 J

① ⑧ ③

Step 19

Technical diagram of a cabinet or wardrobe assembly with numbered components and directional arrows indicating movement.

J		1
I		1

Step 20

E

2

① ③ ③ ⑪ ⑬ ⑬

Step 21

Diagram illustrating door assembly steps with numbered components and a magnified view of the interior panel.

J		1
H		1

Step 22

E

2

Technical diagram of a cabinet with numbered components and an inset view showing labeled parts H and E.

Step 23

Q		2
R		2
R		2

1 R Q R 9 8 R Q

Step 24

R 2 S 2 ||

Wall

Wall

① ③ ⑫ ⑬ ⑬

COMPLETION

Line drawing of a double door cabinet with a triangular roof and two doors (no text or symbols)

Fabricant : Shanghaimuxinmuyeyouxiangongsi

Adresse : Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai 200000 CN.

Importé en Australie : SIHAO PTY LTD. 1 ROKEVA

STREETEASTWOOD NSW 2122 Australie

Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

UK

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Triangle Corner Cabinet

MODELL NR.: J10032-33-FB

Line drawing of a double door cabinet with a triangular roof and two doors (no text or symbols)

www.vevor.com/support

Please read and observe carefully all the assembly instructions before beginning assembly.

Unit should be assembled by two or more people.

DO NOT CLIMB

Please do not let your child climb on the product. If y kids or animals who like to climb, we highly recomme using the wall anchors and brackets/straps that come the package.

Technical diagram showing 13 numbered mechanical or structural components with numbered labels, likely for assembly or assembly instructions.

A27X+2X	B∅1527X+2X	C∅8x30mm17X+1X	D∅5/32"×20mm2X
EST2.9×14mm8X	FST3.5*15mm14X +1X	G∅3.5×30mm[DBTH]2X	H2X
I2X	J4X	K2X	L27X+2X
M8X	N2X	O1X	P2X
QST3.5*16mm[CHYS]2X	R2X+4X	S2X+2X

ASSEMBLY STEPS

Step 1

A		2
G		2

A G G 4 A 5

Step 2

B		2
C		1
O		1
F		2

F F O F F O ⑤ C B B ③

1 2 3

Step 3

A A FF P 7 P A F F F F

A		2
F		4
P		2

Step 4

B		2
C		1

7 C B B ③

Diagram showing three steps of a door opening process with labeled parts and directional arrows

Step 5

A

6

A 10 A A 11 A A

Step 6

B		6
C		4

A A A A 9

Step 8

B		4
C		2

A C A A A A A A C 8 C

A		7
C		4

Step 10

Technical diagram of a mechanical assembly with labeled components and dimension lines

B

4

1 2 3

Step 11

Diagram of a physics experiment setup with labeled components and a magnified view showing rotational motion around a vertical rod.

Step 14

B		2
C		1

B 2 B C ①

1 2 3

Step 15

B		4
C		4

Simple line drawing of a door with a handle and circular arrow indicating direction (no text or symbols)

2 B

3

Step 16

M		8
L		29

graph TD
    L[" "] --> B[" "]
    B --> C[" "]
    style L fill:#fff,stroke:#000
    style B fill:#fff,stroke:#000
    style C fill:#fff,stroke:#000

① ⑨ M ⑩ M ⑪ M ⑬ M ③ ⑥ ⑥

Step 17

D		2
E		4
F		4
H		1
I		1
K		2
N		2

F F N E E H D F F N ⑬ K F F N E E I ⑫ K

Step 18

1 9 3 J

① ⑧ ③

Step 19

Technical diagram showing a cabinet with numbered components and a close-up of the interior panel, labeled with parts 1, 3, 11, 13 and directional arrow J.

J		1
I		1

Step 20

E

2

① ③ ③ ⑪ ⑬ ⑬

Step 21

Diagram illustrating door assembly steps with numbered components and a magnified view of the interior panel.

J		1
H		1

Step 22

E

2

Technical diagram of a cabinet with numbered components and an inset view showing labeled parts H and E.

Step 23

Q		2
R		2
R		2

Technical diagram of a cabinet or enclosure with labeled components and connection points marked as R and Q.

Step 24

R 2 S 2 ||

Wall

Wall

① ③ ⑫ ⑬ ⑬

COMPLETION

Line drawing of a double door cabinet with a triangular roof and two doors (no text or symbols)

Hersteller: Shanghaimuxinmuyeyouxiangongsi

Adresse: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai 200000 CN.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Triangle Corner Cabinet

MODELLO NUMERO: J10032-33-FB

Line drawing of a double door cabinet with a triangular roof and two doors (no text or symbols)

Please read and observe carefully all the assembly instructions before beginning assembly.

Unit should be assembled by two or more people.

DO NOT CLIMB

Please do not let your child climb on the product. If y kids or animals who like to climb, we highly recomme using the wall anchors and brackets/straps that come the package.

Technical diagram showing 13 numbered mechanical or structural components with numbered labels, likely for assembly or assembly instructions.

A27X+2X	B∅1527X+2X	C∅8x30mm17X+1X	D∅5/32"×20mm2X
EST2.9×14mm8X	FST3.5*15mm14X +1X	G∅3.5×30mm2X	H2X
I2X	J4X	K2X	L27X+2X
M8X	N2X	O1X	P2X
QST3.5*16mm2X	R2X+4X	S2X+2X

ASSEMBLY STEPS

Step 1

A		2
G		2

A G G 4 A 5

Step 2

B		2
C		1
O		1
F		2

F F O F F O ⑤ C B B ③

Diagram showing three steps of a door opening process with labeled parts and directional arrows

Step 3

A A FF P 7 P A F F F F

A		2
F		4
P		2

Step 4

B		2
C		1

7 C B B ③

Diagram showing three steps of a door opening process with labeled parts and directional arrows

Step 5

A

6

A 10 A A 11 A A

Step 6

B		6
C		4

A A A A' ⑨

Step 8

B		4
C		2

Technical diagram of a mechanical assembly with numbered components and labeled parts (B, C)

1 2 3

Step 9

A A A A A C A C A C A ⑧ C

A		7
C		4

Step 10

Technical diagram of a mechanical assembly with labeled components and dimension lines

B

4

1 2 3

Step 11

Diagram of a physics experiment setup with labeled components and motion indicators

Step 14

B		2
C		1

B 2 B C 1

1 2 3

Step 15

B		4
C		4

Simple line drawing of a door with a handle and circular arrow indicating direction (no text or symbols)

2 B

3

Step 16

M		8
L		29

graph TD
    A["Circle Node"] --> B["Node B"]
    C["L"] --> B

① ⑨ M ⑩ M ⑪ M ⑬ M ③ ⑥ ⑥

Step 17

D		2
E		4
F		4
H		1
I		1
K		2
N		2

F F N E E H D F F N ⑬ K F F N E E I ⑫ K

Step 18

1 9 3 J

① ⑧ ③

Step 19

Technical diagram showing a cabinet with numbered components and a close-up of the interior panel, labeled with parts 1, 3, 11, 13 and directional arrow J.

J		1
I		1

Step 20

E

2

① ③ ③ ⑪ ⑬ ⑬

Step 21

Diagram illustrating door assembly steps with numbered components and a magnified view of the interior panel.

J		1
H		1

Step 22

E

2

Technical diagram of a cabinet with numbered components and an inset view showing labeled parts H and E.

Step 23

Q		2
R		2
R		2

Technical diagram of a cabinet or enclosure with labeled components and connection points marked as R and Q.

Step 24

R 2 S 2 ||

Wall

Wall

① ③ ⑫ ⑬ ⑬

COMPLETION

Line drawing of a double door cabinet with a triangular roof and two doors (no text or symbols)

Importato in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Importato negli USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Triangle Corner Cabinet

NÚMERO DE MODELO: J10032-33-FB

Line drawing of a double door cabinet with a triangular roof and two panes (no text or symbols)

Please read and observe carefully all the assembly instructions before beginning assembly.

Unit should be assembled by two or more people.

DO NOT CLIMB

Please do not let your child climb on the product. If y kids or animals who like to climb, we highly recomme using the wall anchors and brackets/straps that come the package.

PRECAUCIONES DE MONTAJE

Technical diagram showing 13 numbered components of a structural assembly, including triangular panels and doorways.

A27X+2X	B∅1527X+2X	C∅8x30mm17X+1X	D∅5/32"×20mm2X
EST2.9×14mm8X	FST3.5*15mm14X +1X	G∅3.5×30mm2X	H2X
I2X	J4X	K2X	L27X+2X
M8X	N2X	O1X	P2X
QST3.5*16mm2X	R2X+4X	S2X+2X

ASSEMBLY STEPS

Step 1

A		2
G		2

A G G 4 A 5

Step 2

B		2
C		1
O		1
F		2

F F O F F O ⑤ C B B ③

1 2 3

Step 3

A A FF P 7 P A F F F F

A		2
F		4
P		2

Step 4

B		2
C		1

7 C B B ③

1 2 3

Step 5

A

6

A 10 A A 11 A A

Step 6

B		6
C		4

A A A A' 9

Step 8

B		4
C		2

Technical diagram of a mechanical assembly with numbered components and labeled parts (B, C)

1 2 3

Step 9

A A A A A C A C A C A ⑧ C

A		7
C		4

Step 10

Technical diagram of a mechanical assembly with labeled components and dimension lines

B

4

1 2 3

Step 11

Diagram of a physics experiment setup with labeled components and motion indicators

Step 14

B		2
C		1

B 2 B C 1

1 2 3

Step 15

B		4
C		4

Simple line drawing of a door with a handle and circular arrow indicating direction (no text or symbols)

2 B

3

Step 16

M		8
L		29

graph TD
    A["Circle Node"] --> B["Node B"]
    C["L"] --> B

① ⑨ ③ ⑥ ⑥

Step 17

D		2
E		4
F		4
H		1
I		1
K		2
N		2

F F N E E H D F F N ⑬ K F F N E E I ⑫ K

Step 18

1 9 3 J

① ⑧ ③

Step 19

Technical diagram showing a cabinet with numbered components and a close-up of the interior panel, labeled with parts 1, 3, 11, 13 and directional arrow J.

J		1
I		1

Step 20

E

2

① ③ ③ ⑪ ⑬ ⑬

Step 21

Diagram illustrating door assembly steps with numbered components and a magnified view of the interior panel.

J		1
H		1

Step 22

E

2

Technical diagram of a cabinet with numbered components and an inset view showing labeled parts H and E.

Step 23

Q		2
R		2
R		2

Technical diagram of a cabinet or enclosure with labeled components and connection points marked as R and Q.

Step 24

R 2 S 2 ||

Wall

Wall

① ③ ⑫ ⑬ ⑬

COMPLETION

Line drawing of a double door cabinet with a triangular roof and two doors (no text or symbols)

Fabricante: Shanghaimuxinmuyeyouxiangongsi

Dirección: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Importado a AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Importado a EE. UU.: Sanven Technology Ltd. Suite 250, 9166 Anah Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Triangle Corner Cabinet

NR MODELU: J10032-33-FB

Line drawing of a double door cabinet with a triangular roof and two panes (no text or symbols)

POTRZEBUJESZ POMOCY? SKONTAKTUJ SIE Z NAMI!

Please read and observe carefully all the assembly instructions before beginning assembly.

Unit should be assembled by two or more people.

DO NOT CLIMB

Please do not let your child climb on the product. If y kids or animals who like to climb, we highly recomme using the wall anchors and brackets/straps that come the package.

ŚRODKI OSTROŻNOŚCI PODCZAS MONTAŻU

Technical diagram showing 13 numbered mechanical or structural components with numbered labels, likely for assembly or assembly instructions.

A27X+2X	B∅1527X+2X	C∅8x30mm17X+1X	D∅5/32"×20mm2X
EST2.9×14mm8X	FST3.5*15mm14X +1X	G∅3.5×30mm2X	H2X
I2X	J4X	K2X	L27X+2X
M8X	N2X	O[B2YA]1X	P2X
QST3.5*16mm2X	R2X+4X	S2X+2X

ASSEMBLY STEPS

Step 1

A		2
G		2

G G A 4 A 5

Step 2

B		2
C		1
O		1
F		2

F F O F F O ⑤ C B B ③

1 2 3

Step 3

A A FF P 7 P A F F F F

A		2
F		4
P		2

Step 4

B		2
C		1

7 C B B ③

Diagram showing three steps of a door opening process with labeled components and directional arrows

Step 5

A

6

A 10 A A 11 A A

Step 6

B		6
C		4

A A A A 9

Step 8

B		4
C		2

A C A A A A A A C 8 C

A		7
C		4

Step 10

Technical diagram of a mechanical assembly with labeled components and dimension lines

B

4

1 2 3

Step 11

Diagram of a physics experiment setup with labeled components and motion indicators

Step 14

B		2
C		1

B 2 B C 1

1 2 3

Step 15

B		4
C		4

Simple line drawing of a door with a handle and circular arrow indicating direction (no text or symbols)

2 B

3

Step 16

M		8
L		29

graph TD
    L[" "] --> B[" "]
    B --> C[" "]
    style L fill:#fff,stroke:#000
    style B fill:#fff,stroke:#000
    style C fill:#fff,stroke:#000

① ⑨ M ⑩ M ⑪ M ⑬ M ③ ⑥ ⑥

Step 17

D		2
E		4
F		4
H		1
I		1
K		2
N		2

F F N E E H D F F N ⑬ K F F N E E I ⑫ K

Step 18

1 9 3 J

① ⑧ ③

Step 19

Technical diagram of a cabinet or wardrobe assembly with numbered components and directional arrows indicating movement.

J		1
I		1

Step 20

E

2

① ③ ③ ⑪ ⑬ ⑬

Step 21

Diagram illustrating door assembly steps with numbered components and a magnified view of the interior panel.

J		1
H		1

Step 22

E

2

Technical diagram of a cabinet with numbered components and an inset view showing labeled parts H and E.

Step 23

Q		2
R		2
R		2

1 R Q R 9 8 R R Q

Step 24

R 2 S 2 ||

Wall

Wall

① ③ ⑫ ⑬ ⑬

COMPLETION

Line drawing of a double door cabinet with a triangular roof and two doors (no text or symbols)

Producent: Shanghaimuxinmuyeyouxiangongsi

Adres: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, szanghaj 200000 CN.

Importowane do AUS: SIHAO PTY LTD. 1 ROKEVA

STREETEASTWOOD NSW 2122 Australia

Importowane do USA: Sanven Technology Ltd. Suite 250, 9166 Anar Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technisch Ondersteuning en E-garantiecertificaat www.vevor.com/support

DRIEHOEK HOEKKAST

GEBRUIKSAANWIJZING

MODELNUMMER: J10032-33-FB

Triangle Corner Cabinet

MODELNUMMER: J10032-33-FB

Line drawing of a double door cabinet with a triangular roof and two doors (no text or symbols)

HULP NODIG? NEEM CONTACT MET ONS OP!

Please read and observe carefully all the assembly instructions before beginning assembly.

Unit should be assembled by two or more people.

DO NOT CLIMB

Please do not let your child climb on the product. If y kids or animals who like to climb, we highly recomme using the wall anchors and brackets/straps that come the package.

MONTAGEVOORZORGSMAATREGELEN

Technical diagram showing 13 numbered mechanical or structural components with numbered labels, likely for assembly or assembly instructions.

A27X+2X	B∅1527X+2X	C∅8x30mm17X+1X	D∅5/32"×20mm2X
EST2.9×14mm8X	FST3.5*15mm14X +1X	G∅3.5×30mm2X	H2X
I2X	J4X	K2X	L27X+2X
M8X	N2X	O[XHCS]1X	P2X
QST3.5*16mm2X	R2X+4X	S2X+2X

ASSEMBLY STEPS

Step 1

A		2
G		2

G G A 4 A 5

Step 2

B		2
C		1
O		1
F		2

F F O F F O ⑤ C B B ③

1 2 3

Step 3

A A FF P 7 P A F F F F

A		2
F		4
P		2

Step 4

B		2
C		1

7 C B B ③

Diagram showing three steps of a door opening process with labeled components and directional arrows

Step 5

A

6

A 10 A A 11 A A

Step 6

B		6
C		4

A A A A 9

Step 8

B		4
C		2

A C A A A A A A C 8 C

A		7
C		4

Step 10

Technical diagram of a mechanical assembly with labeled components and dimensions

B

4

1 2 3

Step 11

Diagram of a physics experiment setup with labeled components and motion indicators

Step 14

B		2
C		1

B 2 B C 1

1 2 3

Step 15

B		4
C		4

Simple line drawing of a door with a handle and circular arrow indicating direction (no text or symbols)

2 B

3

Step 16

M		8
L		29

graph TD
    A["Circle Node"] --> B["Node B"]
    C["L"] --> B

① ⑨ M ⑩ M ⑪ M ⑬ M ③ ⑥ ⑥

Step 17

D		2
E		4
F		4
H		1
I		1
K		2
N		2

F F N E E H D F F N ⑬ K F F N E E I ⑫ K

Step 18

1 9 3 J

① ⑧ ③

Step 19

Technical diagram of a cabinet or wardrobe assembly with numbered components and directional arrows indicating movement.

J		1
I		1

Step 20

E

2

① ③ ③ ⑪ ⑬ ⑬

Step 21

Diagram illustrating door assembly steps with numbered components and a magnified view of the interior panel.

J		1
H		1

Step 22

E

2

Technical diagram of a cabinet with numbered components and an inset view showing labeled parts H and E.

Step 23

Q		2
R		2
R		2

Technical diagram of a cabinet or enclosure with labeled components and connection points marked as R and Q.

Step 24

R 2 S 2 ||

Wall

Wall

① ③ ⑫ ⑬ ⑬

COMPLETION

Line drawing of a double door cabinet with a triangular roof and two doors (no text or symbols)

Fabrikant: Shanghaimuxinmuyeyouxiangongsi

Adres: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Triangle Corner Cabinet

MODELLNR: J10032-33-FB

Line drawing of a double door cabinet with a triangular roof and two doors (no text or symbols)

BEHÖVER HJÄLP? KONTAKTA OSS!

Please read and observe carefully all the assembly instructions before beginning assembly.

Unit should be assembled by two or more people.

DO NOT CLIMB

Please do not let your child climb on the product. If y kids or animals who like to climb, we highly recommend using the wall anchors and brackets/straps that come the package.

FÖRSIKTIGHETSÅTGÄRDER FÖR MONTERING

Technical diagram showing 13 numbered mechanical or structural components with numbered labels, likely for assembly or assembly instructions.

A27X+2X	B∅1527X+2X	C∅8x30mm17X+1X	D∅5/32"×20mm2X
EST2.9×14mm8X	FST3.5*15mm14X +1X	G∅3.5×30mm2X	H2X
I2X	J4X	K2X	L27X+2X
M8X	N2X	O1X	P2X
QST3.5*16mm[xx3w]2X	R2X+4X	S2X+2X

ASSEMBLY STEPS

Step 1

A		2
G		2

A G G 4 A 5

Step 2

B		2
C		1
O		1
F		2

F F O F F O ⑤ C B B ③

1 2 3

Step 3

A A FF P 7 P A F F F F

A		2
F		4
P		2

Step 4

B		2
C		1

7 C B B ③

Diagram showing three steps of a door opening process with labeled parts and directional arrows

Step 5

A

6

A 10 A A 11 A A

Step 6

B		6
C		4

A A A A 9

Step 8

B		4
C		2

A C A A A A A A C 8 C

A		7
C		4

Step 10

Technical diagram of a mechanical assembly with labeled components and dimension lines

B

4

1 2 3

Step 11

Diagram of a physics experiment setup with labeled components and motion indicators

Step 14

B		2
C		1

B 2 B C 1

1 2 3

Step 15

B		4
C		4

Simple line drawing of a door with a handle and circular arrow indicating direction (no text or symbols)

2 B

3

Step 16

M		8
L		29

graph TD
    A["Circle Node"] --> B["Node B"]
    C["L"] --> B

① ⑨ M ⑩ M ⑪ M ⑬ M ③ ⑥ ⑥

Step 17

D		2
E		4
F		4
H		1
I		1
K		2
N		2

F F N E E H D F F N ⑬ K F F N E E I ⑫ K

Step 18

1 9 3 J

① ⑧ ③

Step 19

Technical diagram of a cabinet or wardrobe assembly with numbered components and directional arrows indicating movement.

J		1
I		1

Step 20

E

2

① ③ ③ ⑪ ⑬ ⑬

Step 21

Diagram illustrating door assembly steps with numbered components and a magnified view of the interior panel.

J		1
H		1

Step 22

E

2

Technical diagram of a cabinet with numbered components and an inset view showing labeled parts H and E.

Step 23

Q		2
R		2
R		2

Technical diagram of a cabinet or enclosure with labeled components and connection points marked as R and Q.

Step 24

R 2 S 2 ||

Wall

Wall

① ③ ⑫ ⑬ ⑬

COMPLETION

Line drawing of a double door cabinet with a triangular roof and two doors (no text or symbols)

Tillverkare: Shanghaimuxinmuyeyouxiangongsi

Adress: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Importerad till AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOC NSW 2122 Australien

Importerad till USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support