ICB-SR181214 - Chest Freezer Vevor - Free user manual and instructions

Product Type	Built-in Ice Bucket
Brand	Vevor
Model	ICB-SR181214
Capacity	28 liters
Cutout Size (L x W x H)	390 x 238 x 300 mm
Exterior Material	Brushed Stainless Steel
Insulation	Double layer with high-density polyurethane and lid seal
Ice Retention	Up to 24 hours of insulation
Included Accessories	Lid, seal ring, screws, siphon
Installation Type	Built-in (custom cutout required)
Maintenance	Clean after each use, drain water if not used for extended periods
Safety	Contains small parts, choking hazard. Keep out of reach of children
Recommended Use	Keep ice, wines, beers, cocktails, and juices during parties, barbecues, or in restaurants
Seal Type	Adhesive strip on the lid to prevent heat loss
Condensation Prevention	XPE sponge on sides and bottom

Frequently Asked Questions - ICB-SR181214 Vevor

How to install the Vevor ICB-SR181214 built-in ice bucket?

Installation follows the steps provided in the manual: place the siphon in the basin hole, install the supplied parts, tighten with a wrench, and fix the lid. Make sure the cutout exactly matches the dimensions 390 x 238 x 300 mm.

What is the capacity of this ice bucket?

The ICB-SR181214 model has a capacity of 28 liters, approximately 10 kg of ice (depending on density).

How long does the ice stay cold?

Thanks to the double-layer high-density polyurethane insulation, the ice can stay cold for up to 24 hours under normal use conditions.

How to clean the ice bucket?

After each use, empty the melted water and clean the inside with a soft cloth and soapy water. Rinse and dry thoroughly. Avoid abrasive products.

What should I do if the ice bucket is not used for a long time?

Empty all water inside and leave the lid open to dry completely. Store it in a dry place to avoid odors and bacterial growth.

Is the ice bucket suitable for outdoor use?

Yes, it is perfect for patios, gardens, and poolside. Its stainless steel construction withstands light weather, but avoid prolonged exposure to rain.

What accessories are included in the package?

The package contains the main bucket, a lid, a seal ring, screws, and a siphon for draining melted water.

Is the lid airtight?

Yes, the lid has an adhesive strip that ensures an effective seal to prevent heat loss and keep ice longer.

Can I use this ice bucket for bottled drinks?

Absolutely, it is ideal for keeping wine, beer, or soda bottles cool. Fill with ice and place the drinks inside.

Where can I find spare parts for the Vevor ICB-SR181214?

Spare parts are available from Vevor technical support at www.vevor.com/support. Visit the site to order specific parts.

USER MANUAL ICB-SR181214 Vevor

Affordable. Reliable. Home Improvement.

DROP-IN ICE CHESTS

INSTRUCTIONS

Model:ICB-FR201412/ICB-SR181214

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR

Affordable. Reliable. Home Improvement.

DROP-IN ICE CHESTS

Model:ICB-FR201412/ICB-SR181214

Metallic rectangular device with a light blue internal panel and wheels, no visible text or symbols.

Metallic industrial machine with a white panel and metal frame, no visible text or symbols

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of o user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you ag there are any technology or software updates on our product.

SAFETY INSTRUCTIONS

WARNING!

Read and understand this entire manual before asser installing, operating, or servicing this product. Failure to these warnings and instructions can cause personal damage to valuable property.

WARNING!

This product contains small parts. If swallowed, it will pose a choking hazard. Keep these small parts away from children when assembling!

WARNING!

1. While assembling and using this product, keep work area clean and lighted, and keep spectators and children out of the work area.
2. Assemble only according to ice chest parameter. Improper assembly create hazards.
3. Use as intended only.
4. Keep away from sharp points, blades and other items, so as not to s the product.

NOTE:

1. The shown is for illustration purposes only. It may not represent the of the finial purchased.
2. Please follow the installation steps to mount this drop in ice chest. installation steps may cause some damage trouble.
3. Installation is easy. Handle it gently, please.

SAVE THESE INSTRUCTIONS

PRODUCT DESCRIPTION

1. Designed in brushed stainless steel, this built-in ice bucket is durable. Double layer design to achieve better insulation effect. The interior is insulated with high density polyurethane and the lid is sealed with a adhesive strip to prevent heat loss and ensure your ice stays cool for long time.

2. The ice bucket with lid is a versatile and essential accessory to the can keep wines, beers, cocktails and juices fresh and pleasant after long-term use. It is a great choice for terraces, backyards, poolside a restaurants, perfect for any casual occasion such as dinner, sports pa barbecue.

3. The side and bottom of the product are wrapped with XPE sponge, not only increases the thermal insulation effect, but also prevents the and bottom from condensation, which leads to the problem of dripping water on the surface.

LIST OF ACCESSORIES

Filter Components
Name	Qty	Picture	Name	Qty	Picture
1 Cup	1		2 Seal ring	2
3 Lid	1		4 Screw	1
5exhalent siphon	1

Close-up of a metallic automotive hose with threaded end and flange (no text or symbols visible)

Components
Name	Qty	Picture	Name	Qty	Picture	Name	Qty	Picture
A	1		B	1		C	1
D	2	(339/288mm)	E	2	(491/442mm)	F	4	(418mm)
G	4	(418mm)	H	1	(4mm)	I	1	(4mm)
J	4		K	4		L	2
M	2		T	4		O	4
P	1		Q	1		R	1
S	4		1			2

3		5
6	7	8

Installation steps:

1: Place No. 4 part in the basin hole, and install No. 5/6/7 part on 1 2: Tighten the screw with the key, and tighten the 8/9 part on the 7 3: Place part No. 1/2/3 in part No. 4 to complete the installation.

Dimensions and specifications

Model	Cut-out size (L*W*H mm)	Product capacity (L)	Holding time
ICB-FR201412	490*337*490	31	Can provide 24H Insulation effect.
ICB-SR181214	390*238*300	28

NOTE:

1."Cut-out size" is the recommended size. For details, see the actual installation environment.
2."Cut-out size" The height dimension in the dimensions is the height reserved for installation.
3. The product capacity data in the table is calculated by the density water, and there will be some errors in practice, which is a normal phenomenon.
4. Because the volume and density of ice is different from that of water loading capacity of the two is also different. For example, when 10kg can fill the ice bucket, if replaced with water, it takes 23kg of water ice bucket.

*The picture is for reference only, please refer to the actual object.

CLEANING AND MAINTENANCE

1. In order to prevent the growth of bacteria, please take care of the water after each use of the ice tank.
2. If it is not used for a long time, please empty the water inside the and keep it dry to avoid odor or bacteria.
3. When using the ice tank for a long time, please pay attention to price or replacing ice and water in time.

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consultin Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4A>

EC

REP

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR

Affordable. Reliable. Home Improvement.

Glacières encastrables

INSTRUCTIONS

Affordable. Reliable. Home Improvement.

Glacières encastrables

Metallic cylindrical device with a white base and wheels, no visible text or symbols

Metallic rectangular device with a white internal panel and red scroll wheel (no text or symbols visible)

Close-up of a metallic automotive hose with threaded end and flange (no text or symbols visible)

Composants
Nom Qté Image Nom Qté Image Nom Qté Image
UN	1		B	1		C	1
D	2	(339/288 mm)	ET	2	(491/442 mm)	F	4	(418 mm)
G	4	(418 mm) (4 mm)	H	1			1	(4 mm)
J	4		K	4		L	2
M	2		T	4		Le 4
P	1		Q	1		R	1
S	4		1			2

3	4 1×4	5
6	7	8

YH CONSULTING LIMITED. A/S YH Consulting Limited, bureau 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

REPRÉSENTANT DE LA CE

E-CrossStu GmbH

Mainzer Landstr.69,

Affordable. Reliable. Home Improvement.

Einbau-Kühlboxen

ANWEISUNGEN

Modell: ICB-FR201412/ICB-SR181214

www.vevor.com/support

VEVOR

Affordable. Reliable. Home Improvement.

Einbau-Kühlboxen

Modell: ICB-FR201412/ICB-SR181214

Metallic cylindrical device with a white base and wheels, no visible text or symbols

Metallic rectangular device with a white internal panel and red scroll wheel, no visible text or symbols.

Close-up of a metallic automotive hose with threaded end and flange (no text or symbols visible)

YH CONSULTING LIMITED. C/O YH Consulting Limited, Büro 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

EG-Vertreter

Affordable. Reliable. Home Improvement.

GHIACCIAIE AD INCASSO

ISTRUZIONI

Modello:ICB-FR201412/ICB-SR181214

Affordable. Reliable. Home Improvement.

GHIACCIAIE AD INCASSO

Modello:ICB-FR201412/ICB-SR181214

Metallic cylindrical device with a white base and wheels, no visible text or symbols

Metallic rectangular device with a white internal panel and red scroll wheel, no visible text or symbols.

Close-up of a black flexible hose with threaded end and flange (no text or symbols visible)

Importato in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Importato negli USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

YH CONSULTING LIMITED. C/O YH Consulting Limited Ufficio 147, Centurion House, London Road, Staines- upon-Thames, Surrey, TW18 4AX

Affordable. Reliable. Home Improvement.

Hieleras empotrables

INSTRUCCIONES

Modelo: ICB-FR201412/ICB-SR181214

Affordable. Reliable. Home Improvement.

Hieleras empotrables

Modelo: ICB-FR201412/ICB-SR181214

Metallic cylindrical device with a white base and wheels, no visible text or symbols

Metallic rectangular device with a white internal panel and red scroll wheel, no visible text or symbols.

Close-up of a black flexible hose with threaded end and flange (no text or symbols visible)

Componentes
Nombre	Cant.	Imagen Nombre	Cant.	Imagen Nombre	Nombre Cant.	Imagen
A	1		B	1		do	1
D	2	(339/288 mm)	Y	2	(491/442 mm)	F	4	(418 mm)
GRWZ	4	(418 mm)	H	1	(4 mm)	I	1	(4 mm)
Yo	4		K	4		Yo	2
EHTM	2		T	4		EI 4
PAG	1		Q	1		R	1
S	4
			1			2

3	4 1×4	5
6	7	8

YH CONSULTING LIMITADA. A/C YH Consulting Limited Oficina 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

Affordable. Reliable. Home Improvement.

SKRZYNIE LODU WPUSZCZANE

INSTRUKCJE

Modele:ICB-FR201412/ICB-SR181214

Affordable. Reliable. Home Improvement.

SKRZYNIE LODU WPUSZCZANE

Modele:ICB-FR201412/ICB-SR181214

Metallic cylindrical device with a white base and wheels, no visible text or symbols

Metallic rectangular device with a white internal panel and red scroll wheel (no text or symbols visible)

Close-up of a black flexible hose with threaded end and flange (no text or symbols visible)

YH CONSULTING LIMITED. C/O YH Consulting Limited Biuro 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

Przedstaw ciel UE

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt nad Menem.

Affordable. Reliable. Home Improvement.

INLOOP-IJSKISTEN

INSTRUCTIES

Model:ICB-FR201412/ICB-SR181214

www.vevor.com/support

VEVOR

Affordable. Reliable. Home Improvement.

INLOOP-IJSKISTEN

Model:ICB-FR201412/ICB-SR181214

Metallic cylindrical device with a white base and wheels, no visible text or symbols

Metallic rectangular stand with a white internal panel and red scroll wheel (no text or symbols visible)

LIJST MET ACCESSOIRES

Close-up of a metallic automotive hose with threaded end and flange (no text or symbols visible)

YH CONSULTING LIMITED. C/O YH Consulting Limited Kantoor 147, Centurion House, London Road, Staines- upon-Thames, Surrey, TW18 4AX

Affordable. Reliable. Home Improvement.

DROP-IN ISSKISTOR

INSTRUKTIONER

Modell: ICB-FR201412/ICB-SR181214

www.vevor.com/support

VEVOR

Affordable. Reliable. Home Improvement.

DROP-IN ISSKISTOR

Modell: ICB-FR201412/ICB-SR181214

Metallic cylindrical device with a white base and wheels, no visible text or symbols

Metallic rectangular device with a white internal panel and red scroll wheel (no text or symbols visible)

Close-up of a metallic automotive hose with threaded end and flange (no text or symbols visible)

Komponenter
Namn	Antal Bild	Namn	Antal Bild	Namn	Antal Bild
A	1		B	1		C	1
D	2	(339/288 mm)	001	2	(491/442 mm)	F	4	(418 mm)
G	4	(418 mm)	H	1	(4 mm)		1	(4 mm)
J	4		K	4		L	2
M	2		T	4		Den	4
P	1		Q	1		R	1
S	4		1			2

3		5
6	7	8

Installationssteg:

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

www.vevor.com/support