HZW002 - Storage furniture Vevor - Free user manual and instructions

USER MANUAL HZW002 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

SHOECABINET USERMANUAL

MODEL:HZW002

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

SHOECABINET

MODEL:HZW002

Line drawing of a three-tiered cabinet with four legs and two drawers (no text or symbols)

NEEDHELP?CONTACTUS!

Have product questions? Need technical support? Please feel free to contact us:

[e-mail]

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.

SAFETYINSTRUCTIONS

WARNING:

Read this instructions carefully before using this product. Failure to do so can result in serious injury.

Assembly precautions

1. Assemble only should be according to these instructions. Improper assembly can result in hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
3. Keep the assembly area clean and well-lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or when under the influence of alcohol, drugs or medication.
6. The product capabilities apply to properly and completely assembled products only.
7. Assemble on a flat, level, hard and smooth surface capable of safely supporting the shoe cabinet.
8. For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unwrap and separate all parts in a clean work area.

Use precautions

1. DO NOT SIT OR STAND ON THIS ITEM.
2. This product is not a toy. Do not allow children to play with or near this item.
3. Do not exceed weight capacities.
4. Use only on a flat, level, hard and smooth surface capable of safely supporting a fully loaded shoe cabinet.
5. Use as intended only.
6. Inspect before every use; do not use if parts are loose or damaged.

SAVETHESEINSTRUCTIONS

screw 4x40mm wood plug 6x30mm screw 4x16mm96mm6x35mm door pull φ15x9mm spacer φ10mm pull rod eccentrie (wheel) A 12+1PCS 24+2PCSB 4PCSC2 PCSD4PCSE14 +1 PCSF14+1 PCSG Left and right plastic shoe rack bones H1 H2 Three-piece nut I1I2I3 screw 4x12mm3.5x14mm Locking foot iron plate screw H 2SETS I 4SETS J 4PCS 4PCSK24+2PCSL Anti-dumping belt Plastic expansion nail 6x30mm foot pad Sticker sheet φ20mm3x14mmφ20mm Anti-falling iron sheet screw Back plate buckle M 2PCS N 2PCS O 4PCS P 4PCS Q 4PCS 6PCSR 4PCSS screw 4x12mm spanner 4x62mm T 16+2PCS U 1PC

ASSEMBLYSTEP

1

Technical line drawing of a rectangular plate with two side connectors and labeled points (no text or symbols beyond labels)

B x 4PCS
2

B B B 7

B x 4PCS

3 A x2 A A ② ⑦ A x 2PCS 4 I1 x4 I2 x4 I1 I2 I1 I2 ④ I1 I2 ⑤ I1 I2 I1 x 4PCS I2 x 4PCS

5 F x10 F F F F F F F F 4 ④ ⑤ F x 10PCS 6 B x2 B x 4PCS

7

G x10

Technical diagram of a mechanical assembly with labeled components and directional arrows indicating movement or force.

G x 10PCS

8

② ⑦ ⑤ ④ ⑧ ⑧ 90°

A A A A A A A A 3 8 8 5 4 2 7

A x 8PCS

10 T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T

11

Technical diagram of a multi-panel server rack with numbered components and an inset showing a mechanical assembly with rotating axis.

12

O 12 O 12 O x4 O x4 180° ④ ② ⑦ ③ ⑧ ⑤

O x 4PCS

13

Technical diagram of a cabinet with numbered components and an arrow indicating assembly or inspection.

23

Technical diagram of a cabinet with numbered components and an inset close-up showing assembly details labeled J, I3, and x2.

	13×2PCS
	J×2PCS

24

Technical diagram of a cabinet with numbered components and an arrow indicating assembly or inspection

25

Technical diagram of a cabinet with numbered components and an inset showing a screw and a magnified view labeled L×2.

L×2PCS

26

Technical line drawing of a cabinet with numbered components and an arrow indicating assembly or inspection.

27

Technical diagram of a cabinet with numbered components and an inset close-up showing assembly details labeled J, I3, and x2.

	13 x 2PCS
	J x 2PCS

28

Technical diagram of a cabinet with numbered components and an arrow indicating assembly or movement

29

Technical diagram of a cabinet with numbered components and a magnified view showing a screw fastening mechanism.

L×2PCS

30

Q 1 Q 6 7 5 8 Q R x2 S R x4

	Q×2PCS
	R×6PCS
	S×4PCS

graph TD
    A["31"] --> B["Step 1: Screw and Q-axis"]
    B --> C["Step 2: Drill Bit"]
    C --> D["Step 3: Pressure Gauge"]
    D --> E["Step 4: Check Valve"]
    E --> F["Final Measurement Table"]

M x 2PCS

PRODUCTPARAMETER

Package size (mm)	1150*460*170
Size (mm)800*237*1205
Colour White	, burlywood feet
Type 2 layers+1 inter-layer
Texture Chipboard
Base	4 individual legs
Load-bearing	≥150 lbs

Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai

Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

REPU

Pooledas Group Ltd

Knit 5 Albert Edward House, The Pavilions

Preston, United Kingdom

REPE

SHUNSHUN GmbH

Römeräcker 9 Z2021, 76351

TechnicalSupportandE-WarrantyCertificate

www.vevor.com/support

VEVOR® TOUGH TOOLS, HALF PRICE

Line drawing of a simple cabinet with three drawers and four legs (no text or symbols)

BESOIN D'AIDE ? CONTACTEZ-NOUS !

Isometric diagram of a rectangular plate with two labeled terminals (B) and a central circular feature, no text or symbols present.

B x 4PCS
2

B B B 7

B x 4PCS

3 A x2 A ② ⑦ A x 2PCS 4 I1 x4 I2 x4 I1 I2 ④ I1 I2 ⑤ I1 I2 I1 x 4PCS I2 x 4PCS

5 F x10 F F F F F F F F ④ ⑤ F x 10PCS 6 B x2 B x 4PCS

7

G x10

Technical diagram of a mechanical assembly with labeled components and directional arrows indicating movement or assembly.

G x 10PCS

8

② ⑦ ⑤ ④ ⑧ ⑧ 90°

Technical diagram of a multi-level cabinet with labeled components and screw installation details

10 T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T

11

Technical diagram of a multi-panel electrical enclosure with numbered components and a magnified view showing the internal mechanism.

12

O 12 O 12 x4 O x4 180° ④ ② ⑦ ③ ⑧ ⑤

O x 4PCS

13

		H1 x 2PCS
		H2 x 2PCS
		L x 12PCS

L×4PCS

19
20
<......> L x 4PCS
21
	C x 4PCS
	D x 2PCS
	E x 4PCS

22

Technical diagram of a cabinet with numbered components and an arrow indicating assembly or inspection.

23

Technical diagram of a cabinet with numbered components and an inset close-up showing mechanical parts labeled J, I3, and x2.

	13 x 2PCS
	J x 2PCS

24

Technical diagram of a cabinet with numbered components and an arrow indicating assembly or inspection.

25

Technical diagram of a cabinet with numbered components and an inset showing a magnified view of a screw and a 2x2 scale.

L×2PCS

26

Technical diagram of a cabinet with numbered components and an arrow indicating motion or assembly, likely for architectural or mechanical design.

27

Technical diagram of a cabinet with numbered components and an inset close-up showing assembly details labeled J, I3, and x2.

			13 x 2PCS
			J x 2PCS

28

Technical diagram of a cabinet with numbered components and an arrow indicating assembly or movement

29

Technical diagram of a cabinet with numbered components and a magnified view showing a screw fastening mechanism.

L×2PCS

30

Technical diagram of a cabinet with labeled components and a magnified view showing internal structure and motion directions.

	Q×2PCS
	R×6PCS
	S×4PCS

graph TD
    A["Step 1: A × 2PCS"] --> B["Step 2: N × 2PCS"]
    B --> C["Step 3: Q × 2PCS"]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#cfc,stroke:#333

32

Line drawing of a three-tiered cabinet with four legs and one top shelf, labeled M (no text or symbols on the cabinet itself)

M x 2PCS

PARAMÈTRE DUPRODUIT

Rancho Cucamonga, CA91730

Line drawing of a simple cabinet with three drawers and four legs (no text or symbols)

Isometric diagram of a rectangular plate with two labeled terminals (B) and a central circular feature, no text or symbols present.

B x 4PCS

2

B B B 7

B x 4PCS

3 A x2 A ② ⑦ A x 2PCS 4 I1 x4 I2 x4 I1 I2 ④ I1 I2 ⑤ I1 I2 I1 x 4PCS I2 x 4PCS

5 F x10 F F F F F F F F ④ ⑤ F x 10PCS 6 B x2 B x 4PCS

7

G x10

Technical diagram of a mechanical assembly with labeled components and directional arrows indicating movement or assembly.

G x 10PCS

8

② ⑦ ⑤ ④ ⑧ ⑧ 90°

Technical diagram of a multi-level cabinet with labeled components and screw installation details

10 T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T

11

Technical diagram of a multi-panel electrical enclosure with numbered components and a magnified view showing the internal mechanism.

12

O 12 O 12 x4 O x4 180° ④ ② ⑦ ③ ⑧ ⑤

O x 4PCS

13

	H1 x 2PCS
	H2 x 2PCS
	L x 12PCS

L x 4PCS

L×4PCS

	C x 4PCS
	D x 2PCS
	E x 4PCS

22

Technical diagram of a cabinet with numbered components and an arrow indicating assembly or inspection.

23

Technical diagram of a cabinet with numbered components and an inset close-up showing mechanical parts labeled J, I3, and x2.

	13 x 2PCS
	J x 2PCS

24

Technical diagram of a cabinet with numbered components and an arrow indicating assembly or inspection.

25

Technical diagram of a cabinet with numbered components and an inset showing a magnified view of a screw and a 2x2 ratio.

L×2PCS

26

Technical diagram of a cabinet with numbered components and an arrow indicating assembly or inspection

27

Technical diagram of a cabinet with numbered components and an inset close-up showing assembly details labeled J, I3, and x2.

			13 x 2PCS
			J x 2PCS

28

Technical diagram of a cabinet with numbered components and an arrow indicating assembly or movement

29

Technical diagram of a cabinet with numbered components and a magnified view showing a screw fastening mechanism.

L×2PCS

30

Technical diagram of a cabinet with labeled components and a magnified view showing internal structure and motion directions.

	Q×2PCS
	R×6PCS
	S×4PCS

graph TD
    A["Step 1: A × 2PCS"] --> B["Step 2: N × 2PCS"]
    B --> C["Step 3: Q × 2PCS"]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#cfc,stroke:#333

32

M x 2PCS

PRODUKTPARAMETER

www.vevor.com/support

VEVOR® TOUGH TOOLS, HALF PRICE

Line drawing of a simple cabinet with three drawers and four legs (no text or symbols)

Isometric line drawing of a rectangular plate with two labeled terminals (B) and a central circular feature, no text or symbols present.

B x 4PCS
2

B B B 7

B x 4PCS

3 A x2 A ② ⑦ A x 2PCS 4 I1 x4 I2 x4 I1 I2 ④ I1 I2 ⑤ I1 I2 I1 x 4PCS I2 x 4PCS

5 F x10 F F F F F F F F ④ ⑤ F x 10PCS 6 B x2 B x 4PCS

7

G x10

Technical diagram of a mechanical assembly with labeled components and directional arrows indicating movement or force.

G x 10PCS

8

② ⑦ ⑤ ④ ⑧ ⑧ 90°

10 T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T

11

Technical diagram of a multi-panel electrical enclosure with numbered components and a magnified view showing the internal mechanism.

12

O 12 O 12 x4 O x4 180° ④ ② ⑦ ③ ⑧ ⑤

O x 4PCS

13

	H1 x 2PCS
	H2 x 2PCS
	L x 12PCS

L x 4PCS

	C x 4PCS
	D x 2PCS
	E x 4PCS

22

Technical diagram of a cabinet with numbered components and an arrow indicating assembly or inspection.

23

Technical diagram of a cabinet with numbered components and an inset close-up showing mechanical parts labeled J, I3, and x2.

	13 x 2PCS
	J x 2PCS

24

Technical diagram of a cabinet with numbered components and an arrow indicating assembly or inspection.

25

Technical diagram of a cabinet with numbered components and an inset showing a magnified view of a screw and a circular component labeled L x2.

L×2PCS

26

Technical diagram of a cabinet with numbered components and an arrow indicating assembly or inspection

27

Technical diagram of a cabinet with numbered components and an inset close-up showing assembly details labeled J, I3, and x2.

			13 x 2PCS
			J x 2PCS

28

Technical diagram of a cabinet with numbered components and an arrow indicating assembly or movement

29

Technical diagram of a cabinet with numbered components and a magnified view showing a screw fastening mechanism.

L×2PCS

30

Technical diagram of a cabinet with labeled components and a magnified view showing internal structure and motion directions.

	Q×2PCS
	R×6PCS
	S×4PCS

graph TD
    A["Step 1: A × 2PCS"] --> B["Step 2: N × 2PCS"]
    B --> C["Step 3: Q × 2PCS"]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#cfc,stroke:#333

32

M x 2PCS

PARAMETRO DELPRODOTTO

Importato in AUS: SIHAO PTY LTD, 1 ROKESTAREETEASTWOOD

elettronica www.vevor.com/support

VEVOR® TOUGH TOOLS, HALF PRICE

Line drawing of a simple cabinet with three drawers and four legs (no text or symbols)

Isometric line drawing of a rectangular plate with two labeled terminals (B) and a central circular feature, no text or symbols present.

B x 4PCS
2

B B B 7

B x 4PCS

3 A x2 A ② ⑦ A x 2PCS 4 I1 x4 I2 x4 I1 I2 ④ I1 I2 ⑤ I1 I2 I1 x 4PCS I2 x 4PCS

5 F x10 F F F F F F F F ④ ⑤ F x 10PCS 6 B x2 B x 4PCS

7

G x10

Technical diagram of a mechanical assembly with labeled components and directional arrows indicating movement or force.

G x 10PCS

8

② ⑦ ⑤ ④ ⑧ ⑧ 90°

10 T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T

11

Technical diagram of a multi-panel electrical enclosure with numbered components and a magnified view showing the assembly process.

©

13

	H1 x 2PCS
	H2 x 2PCS
	L x 12PCS

L×4PCS

19
20
<......> L x 4PCS
21
	C x 4PCS
	D x 2PCS
	E x 4PCS

22

Technical diagram of a cabinet with numbered components and an arrow indicating assembly or inspection.

23

Technical diagram of a cabinet with numbered components and an inset close-up showing assembly details labeled J, I3, and x2.

	13 x 2PCS
	J x 2PCS

24

Technical diagram of a cabinet with numbered components and an arrow indicating assembly or inspection.

25

Technical diagram of a cabinet with numbered components and an inset showing a magnified view of a screw and a circular component labeled L x2.

L×2PCS

26

Technical diagram of a cabinet with numbered components and an arrow indicating assembly or inspection

27

Technical diagram of a cabinet with numbered components and an inset close-up showing assembly details labeled J, I3, and x2.

			13 x 2PCS
			J x 2PCS

28

Technical diagram of a cabinet with numbered components and an arrow indicating assembly or movement

29

Technical diagram of a cabinet with numbered components and a magnified view showing a screw fastening mechanism.

L×2PCS

30

Technical diagram of a cabinet with labeled components and a magnified view showing internal structure and motion directions.

	Q×2PCS
	R×6PCS
	S×4PCS

graph TD
    A["Step 1: A × 2PCS"] --> B["Step 2: N × 2PCS"]
    B --> C["Step 3: Q × 2PCS"]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#cfc,stroke:#333

M x 2PCS

PARÁMETRO DELPRODUCTO

Importado a AUS: SIHAO PTY LTD, 1 ROKEVA STREET, EASTWOOD NSW 2122 Australia

Importado a EE. UU.: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA1730

REPRESENTANTE DEL REINO UNIDO

Grupo Pooledas Ltd

Line drawing of a simple cabinet with three drawers and four legs (no text or symbols)

POTRZEBUJESZ POMOCY? SKONTAKTUJ SIĘ Z NAMI!

Isometric diagram of a rectangular plate with two labeled terminals (B) and a central circular feature, no text or symbols present.

B x 4PCS
2

B B B 7

B x 4PCS

3 A x2 A ② ⑦ A x 2PCS 4 I1 x4 I2 x4 I1 I2 ④ I1 I2 ⑤ I1 I2 I1 x 4PCS I2 x 4PCS

5 F x10 F F F F F F F F ④ ⑤ F x 10PCS 6 B x2 B x 4PCS

7

G x10

Technical diagram of a mechanical assembly with labeled components and directional arrows indicating movement or assembly.

G x 10PCS

8

② ⑦ ⑤ ④ ⑧ ⑧ 90°

Technical diagram of a multi-level cabinet with labeled components and screw installation details

10 T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T

11

Technical diagram of a multi-panel electrical enclosure with numbered components and a magnified view showing the internal mechanism.

12

O 12 O 12 x4 O x4 180° ④ ② ⑦ ③ ⑧ ⑤

O x 4PCS

13

		H1 x 2PCS
		H2 x 2PCS
		L x 12PCS

L×4PCS

	C x 4PCS
	D x 2PCS
	E x 4PCS

22

Technical diagram of a cabinet with numbered components and an arrow indicating assembly or inspection.

23

Technical diagram of a cabinet with numbered components and an inset close-up showing mechanical parts labeled J, I3, and x2.

	13 x 2PCS
	J x 2PCS

24

Technical diagram of a cabinet with numbered components and an arrow indicating assembly or inspection.

25

Technical diagram of a cabinet with numbered components and an inset showing a magnified view of a screw and a 2x2 ratio.

L×2PCS

26

Technical diagram of a cabinet with numbered components and an arrow indicating assembly or inspection

27

Technical diagram of a cabinet with numbered components and an inset close-up showing assembly details labeled J, I3, and x2.

			13 x 2PCS
			J x 2PCS

28

Technical diagram of a cabinet with numbered components and an arrow indicating assembly or movement

29

Technical diagram of a cabinet with numbered components and a magnified view showing a screw fastening mechanism.

L×2PCS

30

Technical diagram of a cabinet with labeled components and a magnified view showing internal structure and motion directions.

	Q×2PCS
	R×6PCS
	S×4PCS

graph TD
    A["Step 1: A × 2PCS"] --> B["Step 2: N × 2PCS"]
    B --> C["Step 3: Q × 2PCS"]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#cfc,stroke:#333

32

M x 2PCS

PARAMETR PRODUKTU

Importowane do AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Importowane do USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA1730

REP WIELKIEJ BRYTANII

Grupa Pooledas Ltd

Jednostka 5 Albert Edward House, Pawilony

Line drawing of a simple cabinet with three drawers and four legs (no text or symbols)

HULP NODIG? NEEM CONTACT MET ONS OP!

[e-mail]

Isometric line drawing of a rectangular plate with two labeled terminals (B) and a central circular feature, no text or symbols present.

B x 4PCS

2

B B B 7

B x 4PCS

3 A x2 A ② ⑦ A x 2PCS 4 I1 x4 I2 x4 I1 I2 ④ I1 I2 ⑤ I1 I2 I1 x 4PCS I2 x 4PCS

5 F x10 F F F F F F F F ④ ⑤ F x 10PCS 6 B x2 B x 4PCS

7

G x10

Technical diagram of a mechanical assembly with labeled components and directional arrows indicating movement or assembly.

G x 10PCS

8

② ⑦ ⑤ ④ ⑧ ⑧ 90°

Technical diagram of a multi-level cabinet with labeled components and screw installation details

10 T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T

11

Technical diagram of a multi-panel server rack with numbered components and a magnified view showing the internal mechanism.

12

O 12 O 12 x4 O x4 180° ④ ② ⑦ ③ ⑧ ⑤

O x 4PCS

13

		H1 x 2PCS
		H2 x 2PCS
		L x 12PCS

L x 4PCS

L×4PCS

	C x 4PCS
	D x 2PCS
	E x 4PCS

22

Technical diagram of a cabinet with numbered components and an arrow indicating assembly or inspection.

23

Technical diagram of a cabinet with numbered components and an inset close-up showing mechanical parts labeled J, I3, and x2.

	13 x 2PCS
	J x 2PCS

24

Technical diagram of a cabinet with numbered components and an arrow indicating assembly or inspection.

25

Technical diagram of a cabinet with numbered components and an inset showing a magnified view of a screw and a 2x2 ratio.

L×2PCS

26

Technical diagram of a cabinet with numbered components and an arrow indicating assembly or inspection

27

Technical diagram of a cabinet with numbered components and an inset close-up showing assembly details labeled J, I3, and x2.

			13 x 2PCS
			J x 2PCS

28

Technical diagram of a cabinet with numbered components and an arrow indicating assembly or movement

29

Technical diagram of a cabinet with numbered components and a magnified view showing a screw fastening mechanism.

L×2PCS

30

Technical diagram of a cabinet with labeled components and a magnified view showing internal structure and motion directions.

	Q×2PCS
	R×6PCS
	S×4PCS

graph TD
    A["Step 1: A × 2PCS"] --> B["Step 2: N × 2PCS"]
    B --> C["Step 3: Q × 2PCS"]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#cfc,stroke:#333

32

M x 2PCS

PRODUCTPARAMETER

garantiecertificaat www.vevor.com/support

VEVOR® TOUGH TOOLS, HALF PRICE

Line drawing of a simple cabinet with three drawers and four legs (no text or symbols)

BEHÖVER DU HJÄLP? KONTAKTA OSS!

Isometric line drawing of a rectangular plate with two labeled terminals (B) and a central circular feature, no text or symbols present.

B x 4PCS

2

B B B 7

B x 4PCS

3 A x2 A ② ⑦ A x 2PCS 4 I1 x4 I2 x4 I1 I2 ④ I1 I2 ⑤ I1 I2 I1 x 4PCS I2 x 4PCS

5 F x10 F F F F F F F F ④ ⑤ F x 10PCS 6 B x2 B x 4PCS

7

G x10

Technical diagram of a mechanical assembly with labeled components and directional arrows indicating movement or assembly.

G x 10PCS

8

② ⑦ ⑤ ④ ⑧ ⑧ 90°

10 T T T T T T T T T T T T T T T T T T T T T T T T T T T 3 8 5 4 2 7 K x 4PCS T x 16PCS

11

Technical diagram of a multi-panel electrical enclosure with numbered components and a magnified view showing the internal mechanism.

12

O 12 O 12 x4 O x4 180° ④ ② ⑦ ③ ⑧ ⑤

O x 4PCS

13

	H1 x 2PCS
	H2 x 2PCS
	L x 12PCS

L×4PCS

L×4PCS

	C x 4PCS
	D x 2PCS
	E x 4PCS

22

Technical diagram of a cabinet with numbered components and an arrow indicating assembly or inspection.

23

Technical diagram of a cabinet with numbered components and an inset close-up showing mechanical parts labeled J, I3, and x2.

	13 x 2PCS
	J x 2PCS

24

Technical diagram of a cabinet with numbered components and an arrow indicating assembly or inspection.

25

Technical diagram of a cabinet with numbered components and an inset showing a magnified view of a screw and a circular component labeled L x2.

L×2PCS

26

Technical diagram of a cabinet with numbered components and an arrow indicating motion or assembly, likely for architectural or mechanical design.

27

Technical diagram of a cabinet with numbered components and an inset close-up showing assembly details labeled J, I3, and x2.

			13 x 2PCS
			J x 2PCS

28

Technical diagram of a cabinet with numbered components and an arrow indicating assembly or movement

29

Technical diagram of a cabinet with numbered components and a magnified view showing a screw fastening mechanism.

L×2PCS

30

Technical diagram of a cabinet with labeled components and a magnified view showing internal structure and motion directions.

	Q×2PCS
	R×6PCS
	S×4PCS

graph TD
    A["Step 1: A × 2PCS"] --> B["Step 2: N × 2PCS"]
    B --> C["Step 3: Q × 2PCS"]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#cfc,stroke:#333

32

M x 2PCS

PRODUKTPARAMETER

Paketstorlek mm)	1150*460*170
Storlek mm)	800*237*1205
Färg	Vita fötter i burkträ
Typ	2 lager + 1 mellanlager
Konsistens	Spånskiva
Bas	4 individuellaben
Bärande	≥150 pund

Adress Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai

Importerad till Australien: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australien

Importerad till USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA1730

www.vevor.com/support