CT-4 - Storage furniture Vevor - Free user manual and instructions

Product Type	Under-desk storage cabinet
Brand	Vevor
Model	CT-4
Number of drawers	1
Total drawer length	15.7 inches (approx. 40 cm)
Interior drawer length	14.3 inches (approx. 36 cm)
Material	Coated steel (stainless steel rails)
Maximum load capacity per drawer	Not specified in the manual, estimated at 15-20 kg
Color	Not specified (generally gray/black)
Main features	Storage and organization of tools, parts, or various items under a desk or workbench
Rail type	Stainless steel sliding rails
Dividers included	No
Locking device	No
Hub	2 pieces (casters?)
Interior lining	Yes (1 piece for CT-4)
Power supply	None (mechanical product)
Maintenance and cleaning	Clean with a soft, dry cloth; avoid corrosive or abrasive products. Regularly check fasteners.
Safety instructions	Wear gloves during assembly; do not exceed recommended load; pull handle gently.
Spare parts	Rails, handle, screws; contact Vevor support (www.vevor.com/support)
Repairability	Tighten bolts, replace rails if necessary
General information	Manufacturer: Shanghaiuxinmuyeyouxiangonsi; imported by Sanven Technology Ltd. (USA) and SIHAO PTY LTD (Australia)
Warranty	Electronic warranty certificate available at www.vevor.com/support

Frequently Asked Questions - CT-4 Vevor

How to assemble the CT-4 storage cabinet?

Follow the steps in the manual: first assemble panels P1 and P2 with screws F1, then attach P3 to the assembly. Finally, install the product under the desk using the provided fasteners. Be sure to wear gloves to avoid injury.

What is the maximum load capacity of the drawer?

The manual does not specify the exact maximum load, but it is recommended not to exceed a reasonable load (about 15-20 kg) to avoid damaging the sliding rails.

The drawer jams or is difficult to open, what to do?

First check if foreign objects obstruct the rails. Clean them with a dry cloth. If the problem persists, check that the fixing bolts are properly tightened. If the rail is damaged, replace it.

Can I use harsh cleaning products?

No, avoid corrosive or abrasive products. Use a soft, dry cloth for cleaning. For stubborn stains, a slightly damp cloth may suffice.

How to maintain the sliding rails?

Regularly clean the rails with a dry cloth to remove dust. You can apply a dry lubricant (silicone type) if the movement becomes jerky. Avoid oil-based lubricants that attract dirt.

The drawer is loose, how to tighten it?

Tighten all fixing bolts with an appropriate screwdriver. Also check that the rails are properly aligned. If the problem persists, contact Vevor technical support.

Are there dividers included to organize the interior?

No, the CT-4 model does not include dividers. You can purchase them separately if you want to organize your tools. The drawer has an anti-slip lining to prevent sliding.

Can I mount this cabinet under any type of desk?

The cabinet is designed to be mounted under a standard desk. Ensure the underside surface is flat and strong enough to support the weight. Use the provided screws suitable for your desk thickness.

Is the product delivered with instructions in French?

Yes, the instructions are available in French on the site notice-facile.com. You can also download a PDF version. The included manual is in several languages, including French.

How to contact Vevor after-sales service?

Go to www.vevor.com/support to access technical support and the electronic warranty certificate. You can also ask questions on the notice-facile.com platform.

USER MANUAL CT-4 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

Under Desk Printer

MODEL: CT-4 / CT-5

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to co all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually Saving Half in comparison with the top major brands.

MODEL: CT-4 / CT-5

CT-4

CT-5

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of o user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you ag there are any technology or software updates on our product.

SAFETY INSTRUCTIONS

Warning - To reduce the risk of injury, user must read inst manual carefully.

Warning- Be sure to wear gloves when using this product.

1.1 Please make sure to read and understand all instructions before assembling and installing this product.
1.2 Make sure to use the correct tools and fixings for installation and avoid using unsuitable substitutes.
1.3 Please be careful when installing to avoid pinching hands or ot body parts.
1.4 Do not store items in the drawer that exceed the recommended to avoid injury or damage due to the drawer falling off.

Product Description

Under desk drawers are a type of drawer used for storing and orga tools, parts, or other items, usually installed beneath a workbench. Th help keep the work area neat and orderly, allowing users to convenie access the tools or items they need at any time.

Under desk drawers can be widely used in workshops, laboratories, garages, offices, and various other places, making it convenient to store and retrieve all kinds of necessary tools or items.

Product Parameter

Model	loader layers	Total drawer length	Inner drawer length	With dividers	With lock	Hub	Stainless steel rails	liner
CT-4	1	15.7inch	14.3inch	×	×	2pcs	√	1
CT-5	2	15.7inch	14.3inch	×	×	2pcs	√	2

Part List - CT-4

INSTALLATION INSTRUCTIONS - CT-4

Step 1 : Assemble P1 and using screw F1

Step3: Assemble the product und desk.

Step2:Assemble P3 with the component from Step 1

Finished

Part List - CT-5

INSTALLATION INSTRUCTIONS - CT-5

Step 1: Assemble P1 and P2 using screw F1

Step3: Assemble the product und desk.

Step2:Assemble P3 with the component from Step 1.

Finished

PRECAUTIONS FOR USE

1. Gently pull the handle to open or close the drawer smoothly.
2. Avoid pulling the drawer violently to prevent damage to the slide derailment of the drawer.

TROUBLESHOOTING INSTRUCTIONS

1. Drawer is not stable: Check if the slide rail is installed correctly and bolts are tight.
2. Drawer is difficult to pull: Check if there is foreign matter or damag the slide rail, clean the slide rail or replace it if necessary.
3. Drawer is loose: Retighten all fixing bolts.

MAINTENANCE

1. Check all drawer fastenings regularly to ensure they are securely fastened.
2. Avoid using corrosive or abrasive cleaning agents.

Manufacturer: Shanghaiuxinmuyeyouxianggsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NS 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place Rancho Cucamonga, CA 91730

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Ma

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion H, London Road, Staines-upon-Thames, Surrey, TW18 4

VEVOR

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

TROUBLESHOOTING INSTRUCTIONS

Place, Rancho Cucamonga, CA 91730

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Ma

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion H

London Road, Staines-upon-Thames, Surrey, TW18 4

VEVOR

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

TROUBLESHOOTING INSTRUCTIONS

Place, Rancho Cucamonga, CA 91730

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Ma

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion H

London Road, Staines-upon-Thames, Surrey, TW18 4

VEVOR

TOUGH TOOLS, HALF PRICE

TROUBLESHOOTING INSTRUCTIONS

Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Ma

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion H

London Road, Staines-upon-Thames, Surrey, TW18 4

VEVOR

TOUGH TOOLS, HALF PRICE

Part List - CT-4
INSTALLATION INSTRUCTIONS - CT-4

TROUBLESHOOTING INSTRUCTIONS

C/O YH Consulting Limited Office 147, Centurion H, London Road, Staines-upon-Thames, Surrey, TW18 4

VEVOR

TOUGH TOOLS, HALF PRICE

TROUBLESHOOTING INSTRUCTIONS

C/O YH Consulting Limited Office 147, Centurion H, London Road, Staines-upon-Thames, Surrey, TW18 4

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

Onder bureau lade

MODEL: CT-4/CT-5

HULP NODIG? NEEM CONTACT MET ONS OPI

TROUBLESHOOTING INSTRUCTIONS

STREETEASTWOOD NSW 2122 Australia

Geimporteerd maar de VS: Sanven Technology Ltd. Suite 250, 9166 Ana Place, Rancho Cucamonga, CA 91730

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Ma

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion H, London Road, Staines-upon-Thames, Surrey, TW18 4

VEVOR

TOUGH TOOLS, HALF PRICE

Technisch Ondersteuning en E-garantiecertificaat www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

TROUBLESHOOTING INSTRUCTIONS

Rancho Cucamonga, CA 91730

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Ma

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion H

London Road, Staines-upon-Thames, Surrey, TW18 4

VEVOR

TOUGH TOOLS, HALF PRICE