CXFC01-6 - Jack Vevor - Free user manual and instructions

Product Type	RV Leveling Jack
Brand	Vevor
Model	CXFC01-6
Quantity per Lot	6 pieces
Support Height	203.2 mm (8 inches)
Maximum Load per Pad	908 kg (2000 lb)
Included Accessories	2 adjustment pads
Recommended Use	Motorhomes, trailers, boat trailers
Material	Robust steel
Safety	Read warnings before use; wear PPE; avoid open flames
Maintenance	Keep clean, dry, and well-ventilated; clean with a soft cloth
Warranty	Technical support and electronic warranty certificate available at www.vevor.com/support

Frequently Asked Questions - CXFC01-6 Vevor

What is the maximum load supported by each pad?

Each pad can support up to 2000 lb (908 kg).

Is this jack compatible with all motorhomes?

This jack is designed for motorhomes, trailers, and boat trailers. It fits most standard wheels.

How to install the jack correctly?

Ensure that the pad is firmly installed on a stable and level surface. Use the included adjustment pads to adjust the height. Avoid any movement or tipping during use.

What protective equipment should I wear?

Wear safety glasses and protective gloves to avoid injury.

Can I use this jack on dirt ground?

It is recommended to use the jack on a hard and level surface. Dirt ground may be unstable and cause tipping. Use a base plate if necessary.

How to maintain the jack?

Keep the jack clean, dry, and well-ventilated. Clean it with a soft cloth. Avoid contact with sharp objects or open flames.

What to do if the jack doesn't work?

Check that the pad is correctly installed and the surface is stable. If the problem persists, contact technical support at www.vevor.com/support.

Is there a warranty for this product?

Yes, an electronic warranty is available. You can obtain a warranty certificate and technical support on the website www.vevor.com/support.

How many pads are included in the lot?

The lot contains 6 pads (model CXFC01-6).

What is the support height?

The support height is 8 inches (203.2 mm).

USER MANUAL CXFC01-6 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

RV LEVELING JACK PAD

MODEL: CXFC01-6

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

RV LEVELING JACK PAD

MODEL: CXFC01-6

Technical line drawing of stacked cylindrical components and a grid-patterned rectangular base (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.

WARNING

• Please read this manual carefully before using the product.
• Keep away from sharp points, blades and other items, so as not to scratch the product.
  ● Use the product only after receiving professional training.
• Wear necessary personal protective equipment such as safety goggles, and protective gloves during use.
• Ensure that the workspace remains clean, dry, and well-ventilated during operation.
• Keep away from open flame. This product will ignite and burn if brought into contact with an open flame. Do not use the jack pad in flammable, explosive, or damp environments.
• Ensure that the jack pad is securely installed and stable to prevent movement or tipping during use.
• Follow safe operating procedures when using the jack pad, avoiding excessive force or incorrect techniques.
  ● Fix it first when using it. so as not to be injured.
• This product is not a toy, keep away from children and cannot be used as toys for children to play with

Suitable for camping trailer jacks, each pad bearing up to 2,000 pounds. Designed specifically for the strength and quality.

Multi-purpose: Our jack pad is suitable for RV, trailer. Fit most with cars Wheels, RV camper trucks, pop-ups, boat trailers, etc.

PRODUCT CONFIGURATION

Model	CXFC01-6
Quantity (pcs)	6
Support Height (inch / mm)	8 / 203.2
Single Max. Load (lbs / kg)	2000 / 908

2 pcs Adjusting tablet is included.

Two 3D isometric diagrams of a grid-like structure with polygonal patterns, no text or symbols present.

PRODUCT INTRODUCTION

A 56 A

A-A 235 233 197 202 Ø31B

411 411 80 118

3D rendering of a yellow mechanical component with cutouts, mounted on a gray base (no text or symbols visible)

Technical line drawing of a mechanical component with a 347-unit height dimension labeled (no text or symbols beyond the dimension)

USE INDICATION

Exterior view of a Bighorn modular vehicle with a highlighted 3D-printed component (no text or symbols on the vehicle itself)

Suitable for different scenes

Suitable for different scenes

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical line drawing of stacked cylindrical components and a grid-patterned square base (no text or symbols)

BESOIN D'AIDE? CONTACTEZ-NOUS!

CONFIGURATION DU PRODUIT

Two 3D isometric diagrams of rectangular metal frameworks with intricate internal patterns (no text or symbols)

PRÉSENTATION DU PRODUIT

A 36 A

A-A 2.38 2.33 197 202 Ø316

411 411 80 11B

3D rendering of a yellow mechanical component with cutouts, mounted on a gray grid base (no text or symbols visible)

Technical line drawing of a mechanical component with a 347-unit height dimension labeled (no text or symbols beyond the dimension)

INDICATION D'UTILISATION

Exterior view of a Bighorn modular vehicle with a highlighted 3D-printed component (no text or symbols on the vehicle itself)

Suitable for different scenes

Suitable for different scenes

Fabricant : Shanghaimuxinmuyeyouxiangongsi

Adresse: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai 200 000 CN.

Importé en Australie: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australie

C/O YH Consulting Limited Bureau 147,

Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

Technical line drawing of stacked cylindrical components and a grid-patterned square base (no text or symbols)

Two 3D isometric diagrams of rectangular metal frameworks with intricate internal patterns (no text or symbols)

PRODUKTEINFÜHRUNG

A 36 A

A-A 2.38 2.33 197 202 Ø316

411 411 80 11B

3D rendering of a yellow mechanical component with cutouts, mounted on a gray grid base (no text or symbols visible)

Technical line drawing of a mechanical component with a 347-unit height dimension labeled (no text or symbols beyond the dimension)

ANWENDUNGSHINWEISE

Exterior view of a Bighorn modular vehicle with a highlighted 3D-printed component (no text or symbols on the vehicle itself)

Suitable for different scenes

Suitable for different scenes

Hersteller: Shanghaimuxinmuyeyouxiangongsi

Adresse: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai 200000 CN.

Nach AUS importiert: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australien

Importiert in die USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical line drawing of stacked cylindrical components and a grid-patterned square base (no text or symbols)

Two 3D isometric diagrams of rectangular metal frameworks with intricate internal patterns (no text or symbols)

3D rendering of a yellow mechanical component with cutouts, mounted on a gray grid base (no text or symbols visible)

Technical line drawing of a mechanical component with a 347-unit height dimension labeled (no text or symbols beyond the dimension)

INDICAZIONE D'USO

Side view of a Bighorn modular vehicle with a highlighted 3D-printed component (no text or symbols on the vehicle itself)

Suitable for different scenes

Suitable for different scenes

Importato in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD

Nuovo Galles del Sud 2122 Australia

Importato negli USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

CONSULENZA YH LIMITATA.

C/O YH Consulting Limited Ufficio 147,

Casa del centurione, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

elettronica www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical line drawing of stacked cylindrical components and a grid-patterned square base (no text or symbols)

Two 3D isometric diagrams of rectangular metal frameworks with intricate internal patterns (no text or symbols)

3D rendering of a yellow mechanical component with cutouts, mounted on a gray grid base (no text or symbols visible)

Technical line drawing of a mechanical component with a 347-unit height dimension labeled (no text or symbols beyond the dimension)

INDICACIÓN DE USO

Exterior view of a Bighorn modular vehicle with a highlighted 3D-printed component (no text or symbols on the vehicle itself)

Suitable for different scenes

Suitable for different scenes

Fabricante: Shanghaimuxinmuyeyouxiangongsi

Casa Centurión, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

Technical line drawing of stacked cylindrical components and a grid-patterned square base (no text or symbols)

POTRZEBUJESZ POMOCY? SKONTAKTUJ SIĘ Z NAMI!

Two 3D isometric diagrams of rectangular metal frameworks with intricate internal patterns (no text or symbols)

WPROWADZENIE DO PRODUKTU

A 36 A

A-A 2.38 2.33 197 202 Ø316

411 411 80 11B

3D rendering of a yellow mechanical component with cutouts, mounted on a gray grid base (no text or symbols visible)

Technical line drawing of a mechanical component with a 347-unit height dimension labeled (no text or symbols beyond the dimension)

WSKAZANIA DOTYCZĄCE STOSOWANIA

Exterior view of a Bighorn modular vehicle with a highlighted 3D-printed component (no text or symbols on the vehicle itself)

Suitable for different scenes

Suitable for different scenes

Producent: Shanghaimuxinmuyeyouxiangongsi

Adres: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Szanghaj 200000 CN.

Importowane do AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Importowane do USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Biuro 147,

Dom Centuriona, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt nad Menem.

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical line drawing of stacked cylindrical components and a grid-patterned square base (no text or symbols)

BEHÖVER HJÄLP? KONTAKTA OSS!

Two 3D isometric diagrams of rectangular metal frameworks with intricate internal patterns (no text or symbols)

PRODUKTINTRODUKTION

A 36 A

A-A 2.38 2.33 197 202 Ø316

411 411 80 11B

3D rendering of a yellow mechanical component with cutouts, mounted on a gray grid base (no text or symbols visible)

Technical line drawing of a mechanical component with a 347-unit height dimension labeled (no text or symbols beyond the dimension)

ANVÄNDNINGSINDIKATION

Exterior view of a Bighorn modular vehicle with a highlighted 3D-printed component (no text or symbols on the vehicle itself)

Suitable for different scenes

Suitable for different scenes

Tillverkare: Shanghaimuxinmuyeyouxiangongsi

Adress: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai 200000 CN.

Importerad till AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australien

Importerad till USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technische ondersteuning en e-garantiecertificaat www.vevor.com/support

RV-NIVELLATIEKRIKPAD

MODEL: CXFC01-6

Technical line drawing of stacked cylindrical components and a grid-patterned square base (no text or symbols)

HULP NODIG? NEEM CONTACT MET ONS OP!

Two 3D isometric diagrams of rectangular metal frameworks with intricate internal patterns (no text or symbols)

PRODUCTINTRODUCTIE

A 36 A

A-A 2.38 2.33 197 202 Ø316

411 411 80 11B

3D rendering of a yellow mechanical component with cutouts, mounted on a gray grid base (no text or symbols visible)

Technical line drawing of a mechanical component with a 347-unit height dimension labeled (no text or symbols beyond the dimension)

GEBRUIKSINDICATIE

Side view of a Bighorn modular vehicle with a highlighted 3D-printed component (no text or symbols on the vehicle itself)

Suitable for different scenes

Suitable for different scenes

Fabrikant: Shanghaimuxinmuyeyouxiangongsi

Adres: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Sanghai 200.000 CN.

C/O YH Consulting Limited Kantoor 147,

Centurionhuis, Londenweg,

Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

garantiecertificaat www.vevor.com/support