SLR-9 - Lighting Dörr - Free user manual and instructions

USER MANUAL SLR-9 Dörr

SMARTPHONE LED SELFIE RINGLICHT

DE SMARTPHONE LED SELFIE RINGLICHT

BEDIENUNGSANLEITUNG

GB SMARTPHONE LED SELFIE RING LIGHT

INSTRUCTION MANUAL

FR ECLAIRAGE ANNULAIRE LED POUR SMARTPHONES

NOTICE D'UTILISATION

ES ANILLO DE LUZ LED PARA SMARTPHONES

White circular light bulb device with 'DÖRR' branding on the base (no other text or symbols visible)

SLR-9

White Dörr brand light bulb device with labeled parts (01 and 02), no visible text or symbols beyond labels

03 04 05 06 07 08 08a 08b

04 | INBETRIEBNAHME

Circular ring light bulb device with DÖRR logo, no visible text or symbols on body

Mischlicht

Circular light bulb device with glowing effect, labeled DÖRR (no other text or symbols visible)

Kaltlicht

Circular light bulb device with glowing effect, labeled DÖRR (no text or symbols on body)

Warmlicht

05.2 Dimmen

Smartphone with a ring light device displaying a smiling woman's face, mounted on its screen (no visible text or symbols)

Smartphone with a white ring light and a digital display on its front (no visible text or symbols)

10.3 ROHS KONFORMITÄT

THANK YOU for choosing this DÖRR quality product.

Please read the instruction manual and safety hints carefully before first use.

Keep this instruction manual together with the device for future use. If other people use this device, make this instruction manual available. This instruction manual is part of the device and must be supplied with the device in case of sale.

DÖRR is not liable for damages caused by improper use or the failure to observe the instruction manual and safety hints.

01 | SAFETY HINTS

• Do not look directly into the LED and do not direct the light beam into the eyes of humans or animals. CAUTION: Looking into the light for an extended period may cause an irreversible damage to the retina.
• Only for the illumination for photographic purposes. Not suited for permanent room lightning.
• Protect the device from rain, moisture, direct sunlight, and extreme temperatures.
• Turn off the light after use and disconnect from power source.
• Do not operate or touch the device with wet hands.
• Protect the device against impacts. Do not use the device if it has been dropped. In this case a qualified electrician should inspect the device before you use it again.
• Do not attempt to repair the device by yourself. Risk of electric shock! When service or repair is required, contact qualified service personnel.
• People with physical or cognitive disabilities should use the device with supervision.
• People with cardiac pacemakers, defibrillators or any other electrical implants should maintain a minimum distance of 30 cm, as the device generates magnetic fields.
• This device is not a toy. To prevent accidents and suffocation keep the device, the accessories, and the packing materials away from children and pets.
• Protect the device against dirt. Never use aggressive cleansing agents or benzine to clean the device. We recommend a soft, slightly damp microfiber cloth to clean the outer parts of the device. Before cleaning make sure to switch off the device and take off from USB power supply!
• Store the device in a dust-free, dry, and cool place.
• If the device is defective or without any further use, dispose of the device according to the Waste Electrical and Electronic Equipment Directive WEEE. For further information, please contact your local authorities.

02 | PRODUCT DESCRIPTION

Versatile Smartphone LED selfie ring light for video tutorials, self-portraits, beauty videos etc.

The soft light reduces skin imperfections and creates a natural, circle reflection in the eye.

• 60 LEDs Bi-Color
  • Colour temperature 3500-8500 K
• Brightness dimmable
• SOS flashing function
  • Built-in Li-Ion battery 3.7 V / 600 mAh
  • Supplied with USB charging cable

- 3 light modes: cold light, mixed light, warm light

03 | NOMENCLATURE

01 Ring light
02 Clamp
03 Button -
04 On/Off button ⏻
05 Button +

06 Micro USB port
07 LED charging indicator
08 USB charging cable
08a) Micro USB plug
08b) USB A plug

White Dörr brand light bulb device with labeled parts (01 and 02), no visible text or symbols beyond labels

03 04 05 06 07 08 08a 08b

04 | FIRST STEPS

• Before first use, please fully charge the built-in Li-Ion battery.
• Only charge with the supplied USB charging cable
• Never leave the ring light unattended while charging.

Insert the Micro USB plug (08a) of the USB charging cable (08) into the Micro USB port (06) of the LED selfie ring light. Connect the USB A plug (08b) to a USB socket on your computer. The charging process starts, and the LED charging indicator (07) lights up red. When battery is fully charged, the LED charging indicator (07) lights up green. Remove the USB cable.

When the battery is totally empty, the charging time by PC is about 1.5 hours.

05 | OPERATION

05.1 Switching On/Off, changing the light mode

To switch on the LED selfie ring light, press the On/Off button (04) briefly. The LED selfie ring light is in light mode mixed light with approx. 4400 K. For light mode cold light with approx. 8500 K, press the On/Off button (04) a second time. Press the On/Off button (04) a third time to enter the light mode warm light with approx. 3500 K. To switch off the ring light, press the on/Off button (04) a fourth time.

Circular ring light bulb device with Dörr logo and control panel (no text or symbols on body)

Mixed Light

Circular light bulb device with LED display, labeled DÖRR (no text or symbols on body)

Cold Light

Circular light bulb device with glowing effect, labeled DÖRR (no other text or symbols visible)

Warm Light

05.2 Dimming

The brightness can be dimmed in all 3 light modes:

Press button - (03) to reduce the brightness in 3 steps. Press button + (05) to increase the brightness in 3 steps.

05.3 SOS flashing function

To activate the SOS flashing, first press the On/Off button (04) briefly to switch on the LED selfie ring light. Then hold the On/Off button (04) pressed for approx. 2 seconds until the SOS flashing starts.

06 | MOUNTING

For selfies with front camera

Smartphone with a white ring light fixture and a smiling woman's face on screen (no visible text or symbols)

For portraits, interviews etc. with main camera

Smartphone with a white ring light fixture and gray body, no visible text or symbols

07 | CLEANING AND STORAGE

Never use aggressive cleansing agents or benzine to clean the device. We recommend a soft, slightly damp microfiber cloth to clean the outer parts of the device. Before cleaning make sure to switch off the device and take off from USB power supply! Store the device in a dust-free, dry, and cool place. This device is not a toy - keep it out of reach of children. Keep away from pets.

08 | TECHNICAL SPECIFICATIONS

Number of LEDs 60 LEDs
LED power 2 W
Colour temperature min. [Kelvin]	3500 K
Colour temperature max. [Kelvin]	8500 K
Illumination power max. at 1m [Lux]	80-90
Colour rendering index (CRI)	95 Ra
Dimmable in 3 steps
SOS flashing function	√
Power supply	Built-in Lithium-Ion battery 3.7 V/600 mAh
Voltage [Volts] 5V/1A
Operating time approx. (with fully charged battery)	2,5 h
Charging time via USB approx. 1,5 h
Length USB cable approx. [cm]	100 cm
Housing	ABS
Dimensions approx. [cm]	9,5 x 12,5 x 3,8 cm
Outer diameter approx. [cm]	9,5 cm
Inner diameter approx. [cm]	5,5 cm
Opening clamp	max. 2 cm
Weight approx. [g]	50 g

Dörr GmbH reserves the right to make technical changes without notice.

09 | SCOPE OF DELIVERY

1x Smartphone LED selfie ring light

1x USB charging cable

1x Safety hints

10 | DISPOSAL, CE MARKING

10.1 DISPOSAL OF BATTERIES/ACCUMULATORS

Batteries are marked with the symbol of a crossed-out bin. This symbol indicates that empty batteries or accumulators which can no longer be charged should not be disposed of with household waste. Waste batteries may contain harmful substances that can cause damage to health and to the environment. Please use the return and collection systems available in your country for the disposal of the waste batteries.

10.2 WEEE INFORMATION

The Waste Electrical and Electronic Equipment Directive (WEEE Directive) is the European community directive on waste electrical and electronic equipment, which became European law in February 2003. The main purpose of this directive is to prevent electronic waste. Recycling and other forms of waste recovery should be encouraged to reduce waste. The symbol (trash can) on the product and on the packing means that used electrical and electronic products should not be disposed of with general household waste. It is your responsibility to dispose of all your electronic or electrical waste at designated collection points. Disposing of this product correctly will help to save valuable resources and it is a significant contribution to protect our environment as well as human health. For more information about the correct disposal of electrical and electronic equipment, recycling and collection points please contact your local authorities, waste management companies, your retailer, or the manufacturer of this device.

10.3 ROHS CONFORMITY

This product is compliant with the European RoHS directive for the restriction of use of certain hazardous substances in electrical and electronic equipment and its amendments.

10.4 CE MARKING

The CE marking complies with the European standards and indicates that the product meets the requirements of the applicable EU directives.

White Dörr brand light bulb device with labeled parts (01 and 02), no visible text or symbols on the body itself.

03 04 05 06 07 08 08a 08b

05 | MISE EN SERVICE

Circular ring light bulb device with Dörr logo and control panel (no text or symbols on body)

Lumière Mixte

Circular light bulb device with LED display, labeled DÖRR (no text or symbols on body)

Lumière Froide

Circular ring light bulb device with LED display, labeled DÖRR (no text or symbols on the device itself)

Lumière Chaude

Smartphone with a white ring light and a smiling woman on its screen (no visible text or symbols)

Close-up of a silver smartphone with a white ring light fixture and a small LCD screen (no visible text or symbols)

07 | NETTOYAGE ET STOCKAGE

10.4 MARQUAGE CONFORMITÉ EUROPÉENNE CE

White Dörr brand light bulb device with labeled parts (01 and 02), no visible text or symbols on the body itself.

03 04 05 06 07 08 08a 08b

04 | PUESTA EN MARCHA

Circular ring light fixture with DÖRR brand logo, no visible text or symbols on body

Luz Mixta

Circular light bulb device with LED display and brand logo (DÖRR) on base, no visible text or symbols on body)

Luz Fría

Circular light bulb device with glowing effect, labeled DÖRR (no other text or symbols visible)

Luz Cálida

05.2 Regular la luminosidad

Smartphone with a white ring light fixture and a smiling woman's face on screen (no visible text or symbols)

Smartphone with a white ring light and a digital display, no visible text or symbols on the device body.

07 | LIMPIEZA Y ALMACENAMIENTO

White Dörr brand light bulb device with labeled parts (01 and 02), no visible text or symbols on the body itself.

03 04 05 06 07 08 08a 08b

04 | PRIMI PASSI PER L'UTILIZZO

Circular ring light fixture with DÖRR logo, no visible text or symbols on body

Luce Mista

Circular light bulb device with LED display and brand logo (DÖRR) on base, no visible text or symbols on body)

Luce Fredda

Circular light bulb device with glowing effect, labeled DÖRR (no text or symbols on body)

Luce calda

Smartphone with a white ring light and a smiling woman on its screen (no visible text or symbols)

Close-up of a silver smartphone with a white ring light fixture and a small LCD screen (no visible text or symbols)

07 | PULIZIA E STOCCAGGIO

10.3 CONFORMITÀ A ROHS