Clean XFi - Vacuum Cleaner eufy - Free user manual and instructions

USER MANUAL Clean XFi eufy

For FAQs and more information, please visit.

www.eufy.com

eufy Clean XFi (T2530) eufy Clean XF (T2531)

Portable Carpet & Upholstery Cleaner

Owner's Manual

Line drawing of a mechanical device casing with handle and mounting bracket (no text or symbols)

PAP 22

Raccolta Carta

T2530/T2531 51005003984 VO2

Table of Contents

02 IMPORTANT SAFETY INSTRUCTIONS

05 AUSTRALIA & NEW ZEALAND WARRANTY

06 About Your Machine

What's in the Box

Overview

Buttons & Indicators

08 Using Your Machine

Charging

Operating in the Right Position

Using the Machine for Routine Cleaning

Removing Stubborn Stains with the Brushes

Detect Invisible Stains with the UV light (T2531 Only)

11 After-Cleaning Care

Emptying and Cleaning the Dirty Water Tank

Cleaning Other Components

13 Storing Your Machine

13 Specification

13 Troubleshooting

15 Customer Service

Thank you for purchasing this device. Carefully read all the instructions below before using, and keep this manual for future reference.

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions should always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE

WARNING SYMBOLS USED

This is the safety alert symbol. This symbol alerts you to potential hazards that could result in property damage and/or serious bodily harm or death.

To reduce the risk of fire, electric shock, or injury:
- Do not leave this appliance when plugged in. Unplug from outlet when not in use and before servicing.
- Do not use as a toy. Close attention is necessary when used by or near children.

02 EN EN 03

• Use only as described in this manual. Use only manufacturer's recommended attachments.
• Do not use with damaged cord or plug. If this appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
• Do not pull or carry by the cord, use the cord as a handle, close a door on the cord, or pull the cord around sharp edges or corners. Do not run the appliance over the cord. Keep the cord away from heated surfaces.
• Do not unplug by pulling on the cord. To unplug, grasp the plug, not the cord.
• Do not handle the plug or appliance with wet hands.
• Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.

• Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts.

• Turn off all controls before unplugging.

• Exercise extra care when cleaning on stairs.
• Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where these liquids may be present.
• Do not pick up anything that is burning or emitting smoke, such as cigarettes, matches, or hot ashes.
• Do not pick up hard or sharp objects such as glass, nails, screws, coins, etc.
• Do not use without water tanks or filters in place.
  • The appliance is intended for household and indoor use. Do not use the appliance outdoors.
• Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.
• Do not use this appliance in an enclosed space filled with vapors given off by oil-based paint, moth-proofing substances, flammable dust, or other explosive or toxic

vapors.

• Prevent unintentional starting of the appliance. Ensure the appliance is turned off before picking up or carrying the appliance. Carrying the appliance with your finger on the switch or energizing the appliance that has the switch on can lead to accidents.
  • Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, seek medical help at once.
• Do not use an appliance that is damaged or modified. Damaged or modified appliances may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
• Do not expose a battery pack or appliance to fire or excessive heat. Exposure to fire or temperatures above 130^ (266°F) may cause explosion.
• Follow all charging instructions and do not charge the appliance outside of the temperature range specified in the

instructions. Charging Improperly or at temperatures outside of the specified range may damage the battery and increase the risk of fire.
- Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
- Do not modify or attempt to repair the appliance or the battery pack except as indicated in the instructions for use and care.
- Charging, using, and storing of the appliance should be within a temperature range of 5-40°C (41-104°F).
- Place the cords from other appliances out of the area to be cleaned.
• The appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, if they have supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children should not play with this

04 EN EN 05

appliance. Cleaning and user maintenance should not be implemented by children without supervision.

• This appliance contains batteries that are non-replaceable.

- The appliance is not to be used if it has been dropped, if there are visible signs of damage, or if it is leaking.

SAVE THESE INSTRUCTIONS

Notice

This symbol on the covers of its packaging indicators do not disclose of electric call appliances as unsecured municipal water use separate collection facilities. Contact your local authority for information regarding the collection systems available. Electrical appliances are disposed of in landfills or ounces hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being. When replacing old appliances with new urea, the retailer is legally obliged to take back your old appliance for disposal at least one of charge.

FCC Statement

This device compares with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undested operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Notes: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to 3rd TA-27 the B/C Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates use, and reduces radio frequency energy, and, if their transfer and land in accordance with the instructions, may cause harmful interference to radio communications. However, there is a guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by burning the interference by other means of the following requirements (1). However, it expects the receiving an amount (2) to reduce its separation between equipment and receiver. 2. Connect the electrical circuit, into an outer circuit difference from that to within the converter is amended (4). Except the seal and or an experimental radio / television for help.

The following importer is the responsible party (for TOC matters only), Company Name: POWER MOBILE LIFE, LLC Address: 400 108th Ave NE Ste 400, Bellevue, WA 96004-55/1 Telephone: [phone]G

ISED Compliance Statement

This device contains licence-exempt transmission/recovery that comply with Innovation, Science and Economic Development Canada's licence-exempt Review. Operation is subject to the following law conditions.

This desire may not cause interference.

1. This device must access any interference, including interference that may cause or desired operation of the device.

EU Declaration of Conformity

The product controls are the radio interferes requirements of the European Community. Hereby Anker Innovations Limited declares that the equipment is in compliance with Directive 2014/2015. The full net of the EU declaration of conformity is available as the following website: https://support.sdy.com/s/article/recommend/Trice-DownLoad.

GB Declaration of Conformity

Horsby, Anker Innovations, limited declaration that the product is in compliance with Herd homogeneous compatibility regulations 2016, and the Restriction of the Use of Certain Hazardous Substances (Electrical and Electronic Equipment Regulations 2012). The full text of the official declaration of contents is available at the top to allowing website https://www.horsby.com/ or https://www.horsby.com. The following imputes is the responsible party for EU and UK manufacturers: Anker Technology (UK) Ltd, CNRA 49 Canadian Road, Waford, Hertfordshire, WOY-711 IP, United Kingdom. Anker Innovation Centre, Frankfurt, Berlin, Germany. https://www.horsby.com/ and Anker Innovation Centre, Frankfurt, Germany.

AUSTRALIA & NEW ZEALAND WARRANTY

This document details the terms and conditions of the warranty provided with this product. Please disregard any other representations contained on this product's packaging or product with this product, which constitute or absent to consider a warranty. Subject to the exclusions and imbalances set out below we warrant to

you that if you purchase a product directly from us, or, from any of our authorizes redeemers, it will not contain defects which are a result of faulty manufacturer workmanship or materials. This warranty status for 24 months from the date of purchase. This warranty is provided in adult on to your rights under the Australian & New Zealand Consumer Law.

Subject to any rights you have been under the Australian & New Zealand Consumer Law, we will not be liable for defects which are a result of damage or losses caused by factors beyond our centre, any product within which has not been maintained according to any case or maintenance instructions advised with the product, any alteration to a product which are not performed by us, or damage or defects caused to the product due to unusual or non-recommended use. We will not be liable for any special, indirect, deterministic, or economic loss or damage on loss of any otherwise suffered by you or any other person resulting from any act or omission by us. Our sole liability in respect of the Warranty against Defects is limited to the replacement of the goods.

This Warranty against Defects is provided in addition to other rights and re-indebts that you may have at law. Our genes come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and can compensate for any reasonably for septic loss or damage. You are also not than to have the

goods repaired at replaced if the goods fail to be of acceptable quality, and the failure does not amount to a major failure.

In order to claim the warranty, you must return the product to the retailer from which it was purchased or that retailer is part of a national network. A store within that main, along with contradictory proof of purchase. The retailer will then return the goods to directed Deutsch to Australia authorized by After Indecations Limited. Directed Electron on Australia will repair replace or returns the product at its discretion. The retailer will contact you when the products are ready for collection. All stores involved in coming this warranty including the cost of the retailer sending the product to Directed Electron Australia will be borne by you.

06 EN EN 07

This warranty is offered by Driced Electronics Australia. Customer service support number (161): 3 8331 4820 Mon 71 6 30 AM - 5:00 PM (AZST), and customer service email address [e-mail].

About Your Machine

What's in the Box

Machine Tool Charging Case Cleaning Formula 4-200000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 Owner's Vascular & Other Documents

Overview

A. Front

B. Back

Bottle brush *For early Clean XF (T2530) Modified brush *For early Clean XF (T2531) Main handle Endpoint port Dry water tank Snap flip Utilizing outlets Renewable button lens Smart LED screen Water filter cover Clean water tank USB-charging port Brush inductor button

Buttons & Indicators

early Clean XF (T2530) early Clean XF (T2531)

LED indicators		• Displays the battery status,• If the battery level is above 10%, LED will turn off, then and the machine will turn off.• Illustrates white charging. When fully charged, the battery status light will turn off
		• Lights up when there is not enough water in the clean water tank.
		• Lights up when a malfunction occurs.
		• Lights up when dry water reaches the maximum level in the dry water tank.

08 EN EN 09

Kurton Control		Press to turn onto the machine
		Press and hold to dispense watch
		Press to space/discisc brush ridingPress and hold for 2 seconds to turn off off the flight.

Using Your Machine

Charging

For maximum run time (20 mins), change the machine for 4 hours with a 5V 2A USD charger.

Operating in the Right Position

To prevent water leakage, always make sure that the machine is operated in the correct position

Diagram showing four steps of a robotic device operation: check, close-up, press, and take-down.

Using the Machine for Routine Cleaning

Before using the machine, always make sure that there is sufficient water in the clean water tank.

① ② 1:20 ③ ④

• To enhance the cleaning effect, you can add one plate cap of eule Clean XF cleaning, formula to the clean water tank and fill water to the max.
Only early Clean XF (100%) comes with the coating formula. The coating formula is solid separately for early Clean XF (T2530).
- Keep spray away from face. Failure to do so may result in personal injury
- Use of cleaning formula or switch operate lemon or pine oil or damage the appliance and said the warranty. Chemical spot cleaners or solvent based soft removers also should not be used. These products may react with the plastic materials used in your cleaner, causing cracking or putting.

To clean different lines of masses, then operate the machine in different angles as shown below.

Illustration of two hands using a handheld device to lift a surface, no text or symbols present

Cleaning wet-and-dry messes Cleaning liquid mass

10 EN EN 11

• When taking the cleaning formula on facts for the first time, test in an unconscious area to check if the cleaning formula will diminish the facts products
• "there is liquid in the dirty water tank, do not turn the marine upside down or sideways, its no point the action change upward or stake the marine
  After each cleaning, air dry the fabric products in time to prevent window or unpleasant smells.

Removing Stubborn Stains with the Brushes

to remove stadium stairs, you can try the following operations

For early Clean X1(T2530) such the area by moving, the side brush back and forth to remove the stain.

For purity (Iron 35-12531), press that to activate the motorized brush. Then scrub the area with the motorized brush. When the scrubbing is finished, press again to stop the motorized brush.

- When scrubbing the steam with the brush, lift the machine forward and keeps the nozzle "a" on the clean surface to vacuum the debris, dust, and remaining Bahamas. - Multiple presses may be necessary depending on the type of surfaces and the size of the mass being cleaned.

Detect Invisible Stains with the UV light (T2531 Only)

To detect invisible stains such as pet urine stains or other hidden masses on carpos or upceralides using truly clean XE (125+), you

pan press and hard line 75 for 1 second to turn on the UV light. Angle the UV light and scan the area being cleaned.

35° 图层: 15 20 30 40 50

- Please avoid direct exposure of human or pet's eyes to the UV light.

• UV light should be used in a dark environment

After-Cleaning Care

For optimal performance, follow the instructions below to clean the machine after each use.

Any other servicing should be performed by an authorized service representative.

Emptying and Cleaning the Dirty Water Tank

When the full capacity indicator on the (HD) series, it illustrates or you know that the water has reached the KEX line, you should Egypt and clean the dry water tank before further use.

Diagram illustrating a three-step cooking process: adding a blender, pouring liquid into a dish, and adding a container with a speedometer.

Illustration showing three steps of a sunlit water tower with labeled diagrams ②, ④, and ⑥.

12 EN EN 13

Cleaning Other Components

Remove the clean water tank and suction lens

1. Press the crush release button and pull out the brush.

Technical line drawing of two mechanical components with no visible text or symbols

early Clean XFi [T2530]

only Clean XF (T2S31)

Since all the components thoroughly with running water, and air dry them completely before next use.

Before re installing the clean water tank and removable suction tank, wipe the clean water tank slot and suction channel until a rear, with a tissue or towel.

To reinstall the motorized brush (T2531 only):

Storing Your Machine

Before storing your machine, ensure that both the clean water tank and the dirty water tank are empty. The machine should be stored in its horizontal position, and in a protected, dry area

Specification

Model T2530 & T253
Charging Input 5V 2A
Charging Part Type I
Charging Time 4 Hours
Max Bus Time 30 mins

Troubleshooting

the solutions below are for general questions, if your problem persists, will mostly can go to truly a can asp, or co-tract support/benly com for help.

Problems Possible Cause Solutions
Machine does not work	Machine is out of power	Charge the machine before use.
	The suction channel, dirty water tank, or filter is stuck	Clean the suction channel, dirty water tank or filter.
The ring of the 140 screw lights up a net	Machine Future	Please contact early customer support for hells.
Machine cannot be charged	The power card is not complete correctly	Connect the power card on applicable power source.
	The USB charger uses does not it	Make sure to use a way 2A USB charger for charging.
	The USB charging parts not working	Contact only customer support for assurance if the charging port is not working normally.
Reduced or no solution	Dirty water tank is nor properly installed.	Retireal dirty water tank and continue the plus a secure.
	Renewable suction lens is not properly installed or in clogged.	Remove, clean, and removal suction lens.
	Renewable suction lens is not engaged with the carpet.	Tilt the machine forward and press down front on the carpet.
	Design on the filter	Remove details from the filter of the dirty tank correctly.

Problems Possible Cause Solutions
Reduced or no spray	the pump is not primes.	While the machine is turned on pixels and hole the supply button for a few seconds.
	the spray stands in clogist.	Clear debris from the spray stands using a pencil clip or shirteenth object.
	Machine is being used to install a position.	Use machine in a horbote position. Please refer to Operating in the Right Position of this basis.
Motorized brush does not suitable * Only applicable to early Clean XF (T2531)	Motorized brush is in particular installed.	Remove and removal the brush.
	Rearr chamber is full of debris.	Clear the deletion with the brush chamber.

Problems Possible Cause Solutions
Machine is leaking	Dirty water tank, packet is dirty.	Clean the packet.
	Dirty water tank and plug are not properly treated.	Removes and prevent the dirty water tank and plug, but they are secured into parks.
	Dirty water tank is full	Police takes in Emptying and Cleaning the Dirty Water Tank or the manual to empty the tank. The machine should not be stored on its side.
	Machine is taken on its side, back, or pointed directly downward.	Ensure machines in a hot canal or upright position.

Customer Service

Contact Us

[e-mail]

www.eury.com

(US)(A) [phone] (UK) +44 (D) [phone] (DQ) +49 (D) 69 3579 7950 (日本) [phone]

For more support phone numbers, please visit http://support.easyfe.care/ pharecartier is Or scan the QA data below.

For mobile video, FAQs manuals, and more information please visit http://www.oxia.com.cn or scan the QR code below.

@LufyOfficial @EuryOfficial @LufyOfficial @EuryOfficial

14 EN EN 15

Inhaltsverzeichnis

Aberi Innovations Limited - Room 1418-19, Hollywood Plaza, 610 Nahon Road, Morgan, Cambridge, Hong Kong

Über Ihre Maschine

Was ist in der Box

Cerda 15Pd adolabs Benging-lame your hair, my Chain ST, 75%RH, separa and your hair, my Chain ST, 80%RH. Eck your hair, my Chain st. and her fou d'orms

Übersicht

A. Vorderseite

Illustration of two hand tools interacting with a device, one holding a magnifying glass and the other a circular object (no text or symbols)

Anker Technology (UK) Ltd. CNF0, 49 Clarendon Road, Watford, Hertfordshire, WD17.1HP, United Kingdom

Singer innovations Limited - Room 1918-19, Hollywood Plaza, 610 Nathan Road: Vorgkok, Kowloon, Long, Kong

Mark the Cans is required. P8 Formula solutions *The mean value/mean (P750) is where per standard line and per unit (P120) is (2.43) Mark the appropriate values document

36 ES ES 37

Vista general

A. Parte delantera

Illustration of two hands using a handheld device to interact with a small object, no text or symbols present

Fats consultant for aies on video,

Ankore Technology, UK) Ltd | SNBR 49 (Zarendon Road, Watford, EastJordshire, 7617-1HP United Kingdom)

Aker, Ansevat and United. Soam 1418-19, Hollywood Plaza, 610 Nathan Board, Morgick, Kowloon, Hong Kong

Aptitude Clean cleaning EPS Extricate the image Your only Clean EPS is the best there is part of your only Clean EPS (2,240) Manuals no, properable or surface documents

Aperçu

A. Front

B. Arrière

54 FR FR 55

Engine on grade Port d'acropement Engine on side Lineout de penetration Lineout on inside Object is on outside Engine on side Engine on side Engine on side Engine on side Engine on side Engine on side Engine on side Engine on side Engine on side Engine on side Engine on side Engine on side Engine on side Engine on side Engine on side Engine on side Engine on side Engine on side Engine on side Engine on side Engine on side Engine on side Engine on side Engine on side Engine on side Engine on right Engine on left Engine on right Engine on left Engine on right Engine on left Engine on right Engine on left Engine on right Engine on right Engine on left Engine on right Engine on left Engine on right Engine on right Engine on left Engine on right Engine on left Engine on right Engine on right Engine on left Engine on right Engine on left Engine on right Engine on right Engine on left Engine on right Engine on left Engine on right Engine on right Engine on left Engine on right Engine on left Engine on left Engine on right Engine on right Engine on left Engine on right Engine on left Engine on right Engine on right Engine on left Engine on right Engine on left Engine on right Engine on right Engine on left Engine on right Engine on left Engine on right Engine on right Engine on left Engine on right Engine on left Engine on right Engine on right Engine on left Engine on left Engine on right Engine on right Engine on left Engine on right Engine on left Engine on right Engine on right Engine on left Engine on right Engine on left Engine on right Engine on right Engine on left Engine on right Engine on left Engine on right Engine on right Engine on left Engine on right Engine on left Engine on right Engine on left Engine on right Engine on right Engine on left Engine on right Engine on left Engine on right Engine on right Engine on left Engine on right Engine on left Engine on right Engine on right Engine on left Engine on right Engine on left Engine on right Engine on right Engine on left Engine on left Engine-on double bottom/arrow/ Reservoir drain process/ Port's chargeon U/U/ Button de l'position de la mousse

Brassie apple dust *Pour early Clean X1 (T2530) Brassie macroton

Coastor intelligent Crustor de l'activation Biomore d'aux provides Porte de chargement Usu Frontier de l'activation de la crise

Diagram showing a device with labeled buttons and a magnified view of its screen, likely illustrating a control or measurement setup.

58 FR FR 59