DINORA 8060 - Lamp BRENNENSTUHL - Free user manual and instructions
Find the device manual for free DINORA 8060 BRENNENSTUHL in PDF.
User questions about DINORA 8060 BRENNENSTUHL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Lamp in PDF format for free! Find your manual DINORA 8060 - BRENNENSTUHL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DINORA 8060 by BRENNENSTUHL.
USER MANUAL DINORA 8060 BRENNENSTUHL
Mobiler LED Strahler Mobile LED Light
DINORA 5050 DINORA 8060 / DINORA 8061 DINORA 10050 / DINORA 10051
GB Operating instructions 6
FR Mode d'emploi 9
text_image
LED LED INOperating Instructions Mobile LED Light
DINORA 5050
DINORA 8060 / DINORA 8061
DINORA 10050 / DINORA 10051
Attention: Before using the product, please read these instructions for use carefully and keep them in a safe place afterwards!
SAFETY INSTRUCTIONS
• Always check the product for damage before use.
Never use the product in case of any damage. In case you find the product to be damaged, please refer to an electrician or the manufacturer's service address.
Non-compliance poses a risk of fatal injury from electrical current!
- Do not use the product in potentially explosive atmospheres – danger of death!
- Keep the light away from children. Children are not aware of the risks posed by electric current.
- Please never look directly into the light.
- A destroyed protective cover cannot be replaced. The light has to be disposed of.
- The external flexible line of this lamp cannot be exchanged; if the line is damaged, the lamp has to be scrapped.
Hot surface.
Not suitable for applications with external dimmers.
If the minimum distance is not complied with, illuminated objects may overheat.
TECHNICAL DATA
Protection class: II
Impact resistance: IK08
Temperature range: -20^ to +40^
Power factor: >0.9
| Type: 5050 8060 / 8061 10050 / 10051 | |||
| Mains plug: Schuko Schuko Schuko | |||
| Connection cable: H07RN-F 2G1.0 H07RN-F 3G1.5 H07RN-F 3G1.5 | |||
| Protection class: IP65 IP54 IP54 | |||
| Power consumption: 44.5 W 66.9 W | 85 W | ||
| Rated voltage: 100-240 V~ 50/60 Hz 100-240 V~ 50/60 Hz 220-240 V ~ 50/60 Hz | |||
| Current max: | 0.5 A | 0.7 A | 0.4 A |
| Socket Rated voltage: | — | 100-240 V~ 50/60 Hz | 220-240 V~ 50/60 Hz |
| Socket max. load: | — | 3500 W | 2800 W |
| Max. projected area: | 500 cm^2 | 900 cm^2 | 900 cm^2 |
| Dimensions: | 278 x 213 x 86 mm | 363 x 278 x 98 mm | 363 x 278 x 98 mm |
| Dimensions protective cover: | 225 x 164 x 2 mm | 309 x 229 x 2 mm | 309 x 229 x 2 mm |
| Weight: | 2.0 kg | 2.64 kg | 2.69 kg |
This product is suitable for indoor and outdoor lighting purposes.
This product is supplied ready for connection with connecting cable and plug. It can be used as a power distributor through the socket on the back. Schuko plugs may only be plugged into IPX4 sockets in damp environments/outdoors. Any use other than described above or any modification of the unit is not permitted.
OPERATION
Setting up the luminaire and switching it on
Place the luminaire on a dry, level surface. Only use the lamp with the bracket folded out. The infinitely adjustable bracket allows the lamp to be tilted to different angles. The luminaire can be switched on and off with the switch located on the back.
DIMM FUNCTION (DINORA 10050/10051)
This luminaire shines with 100% brightness, the light intensity can be adjusted continuously from 100% – 10%. To do this, press and hold the switch – the light intensity is slowly reduced. Proceed in the same way to increase the intensity again.
STAND MOUNTING
The spotlight can be mounted on a Brennenstuhl tripod using the holes in the mounting bracket (mounting material not included).
ACCESSORIES
You will find suitable accessories on our homepage www.brennenstuhl.com.
CLEANING
Before cleaning, disconnect the product from the power supply.
Do not use solvents, caustic cleaning agents or similar products.
Only use a dry or slightly moistened cloth for cleaning.
MAINTENANCE
text_image
LED LED INATTENTION: The LED lamp does not contain components that require maintenance. The light source of this lamp cannot be replaced If the light source has reached the end of its service life, the entire lamp has to be replaced. The lamp may not be opened.
EU DECLARATION OF CONFORMITY
The declaration of conformity is deposited with the manufacturer.
DISPOSAL
Dispose of electric appliances in an environmentally friendly manner! Electric appliances must not be disposed of in household waste!
The European Directive 2012/19/EU on Waste Electrical and Electronic Equipment rules that used electric appliances should be collected separately and recycled in an environmentally friendly manner.
For possibilities of disposal of the used appliance, please contact your local or municipal administration.
MANUFACTURER
For more information, we recommend the Service/FAQs section on
our homepage www.brennenstuhl.com.
