GSB 20 LASER - Drill Güde - Free user manual and instructions

USER MANUAL GSB 20 LASER Güde

EN Translation of the original instructions Column drill

Blue industrial drill press with black and blue components, no visible text or symbols

GSB 20 LASER/500W

55209

GÜDE GmbH & Co. KG

Birkichstrasse 6

74549 Wolpertshausen

Deutschland

Güde

ENGLISH Please read the instructions carefully before starting the machine.

EN Starting-up the machine

FR mise en service

Close-up of a blue industrial machine with a black cylindrical component and a metallic shaft, no visible text or symbols.

1

11 10

Close-up of a blue industrial machine with mechanical components and a 3D tool icon (no text or symbols)

13 11

2

1 GSB 20 LASER SB 20 LASER

2 2 1

Two-panel diagram showing a device with lock and directional arrow, and a connected device with horizontal bars (no text or symbols)

2

GSB 20 LASER/500W +230 V - 50 Hz +500 - 2500 min⁻¹ +500 W / 52 +21 Güde See: No.: 1986-2014 1997 Risikler: 22.73 SUN: 48.167.10.2019 SUN: 12.233 SUN: 12.233 SUN: 12.233 SUN: 12.233 SUN: 12.233 SUN: 12.233 SUN: 12.233 SUN: 12.233 SUN: 12.233 SUN: 12.233

2

6

GSB 20

Simple line drawing of a balance scale with no text or symbols

7

7 1 2 GSB 20 1500W

2

1 2 13 1 2 3

Close-up of a drill bit with a twist drill, showing blade and handle (no text or symbols)

Close-up of a blue GSB 20 precision tool with mechanical components and a white arrow indicating a specific part (no readable text or symbols)

2

graph TD
    A["Wood block"] --> B["Assembly"]
    B --> C{Check}
    C -->|✓| D["Check"]
    D --> E["Gude GSB 20"]
    E --> F["Final Product"]

Close-up of a blue GSB 20 laser drilling setup with a wooden block, showing mechanical components and a green checkmark (no text or symbols on the machine itself)

Laser / Solid No Hand

CLASS 2 LASER

TEST GSB 20 Laser / 500M ✓

DE Mikroschalter IT Microinterruttore SK Mikrospínač EN Microswitch NL Microschakelaar HU Mikrokapcsoló FR Micro-interrupteur CZ Mikrospínač PL Mikroprzełącznik

DE Mikroschalter IT Microinterruttore SK Mikrospínač EN Microswitch NL Microschakelaar HU Mikrokapcsoló FR Micro-interrupteur CZ Mikrospínač PL Mikroprzełącznik

START 3 STOP

1 GSB 20 5 mm 1 2 3

2 START

3A

3B max. 50 mm

START 3 STOP

3C 60 50 40 30 20 10 0

Mechanical assembly diagram showing a drill press operating on a workbench, with a magnified inset highlighting the drill bit (no text or symbols present)

3D mechanical assembly diagram showing a milling machine with a drill bit and tool, no visible text or symbols

5 STOP

4

1

Technical diagram of a CNC machine tool with labeled components and directional arrows indicating motion or assembly.

4

1

Mechanical assembly diagram showing a blue valve with a rotating knob and lock mechanism (no text or symbols)

2 45°45°

4

Industrial machine with blue base and metal stand, no visible text or symbols

2 OIL OIL OIL

3 13 1 2 3

Close-up of a drill bit with a drill bit being inserted, showing no text or symbols on the drill bit itself.

4

CLASS 2 LASER

Close-up of a mechanical assembly with blue components and a white arrow indicating a specific component (no text or symbols visible)

Close-up of a mechanical assembly with blue components and a directional arrow indicating motion (no text or symbols)

3 16 2x AAA

Close-up of a mechanical assembly with blue and black components, no visible text or symbols

4

CLASS 2 LASER

Close-up of a mechanical assembly with blue and black components, no visible text or symbols

Close-up of a blue mechanical presser with spring and lock mechanism (no visible text or symbols)

Technische Daten

Column drill	GSB 20LASER/500W
Art. No 55209
Mains voltage 230 V
Mains frequency 50 Hz
Safety class I, IP X0
Motor power 500 W
Spindle stroke 50 mm
Spindle speed 600 - 2600 min	-1
Reach 145 mm
Drill chuck range 3-16 mm
Drill chuck cone B16
Spindle receiver MK 2
max. Drilling capacity in steel 16 mm
Diameter of bench 210 x 210 mm
Base plate WxD	440 x 300 mm
Diameter of columns	70 mm
Length of connecting cable	2,0 m
Type of cable H05VV-F
Length 440 mm
Width 300 mm
Height	1430 mm
Net/gross weight	26 / 29 kg
Noise details
Sound pressure level L_pA	70,5 dB (A)
Sound power level L_WA	86 db (A)
Wear ear protectors!

The numerical values given are emission levels and not necessarily safe working levels. Although there is a correlation between the emission levels and the acceptable exposure levels, they cannot be reliably used to determine whether or not any additional safety measures are necessary. The characteristics of the work space, other sources of noise, i.e. the number of machines and other processes running in the vicinity and so on, are all factors that can influence the actual exposure levels of the employees. Moreover, the acceptable exposure levels can vary from country to country. This information should enable the machine's operator to carry out a better assessment of the risks and hazards.

Read and understand the operating instructions before using the appliance. Familiarise with the

control elements and how to use the appliance properly. Abide by all the safety measures stated in the service manual. Act responsibly toward third parties.

The operator is responsible for accidents or risks to third parties.

Persons over 16 years of age can only work on the appliance. An exception includes youngsters trained in order to reach knowledge under supervision of the trainer during occupational education.

In case of any doubts about connection and operation refer please to our customer center

Specified Conditions Of Use

Bench drilling machine for light and medium drilling work in wood, metals and plastics.

The machine may only be used in a technically perfect condition and taking into account all safety information.

Do not use this product in any other way as stated for normal use. Not observing general regulations in force and instructions from this manual does not make the manufacturer liable for damages.

It is strictly prohibited to disassemble, modify and purposely remove the protective equipment on unit and fit other protective equipment instead.

Even when the device is used properly and all safety regulations are complied with, there still may be some residual risks.

• noise emissions
• dust emissions
  • vibrations to hand and arms
• Danger of burns Tool and workpiece heat up during operation.
• Risk of injury Sharp tools and workpiece edges

Emergency procedure

Conduct a first-aid procedure adequate to the injury and summon qualified medical attendance as quickly as possible. Protect the injured person from further harm and calm them down. If you seek help, state the following pieces of information: 1. Accident site, 2. Accident type, 3. Number of injured persons, 4. Injury type(s)

Symbols

WARNING/CAUTION!

Warning against dangerous electric voltage

Warning against cutting injury

Warning against thrown-off items

This product corresponds to the laser class 2 in accordance with EN 60825-1:2014 Do not stare into beam.

WARNING - Read the operating instructions to reduce the risk of injury.

Unplug the machine before any work on it.

Wear eye protective goggles! Wear ear protectors!

Keep dry at all times. Never expose tool to rain.

Always keep children and unauthorised persons out of reach of the appliance.

Forbidden operation for persons with chainlet

Forbidden operation for persons with long hair.

Do not operate the power tool when wearing a tie

Any damaged or disposed electric or electronic devices must be delivered to appropriate collection centres.

CE marking

General safety information

WARNING!

When using electric tools the following general safety instructions must be obeyed to protect yourself from electric shocks, injury and fire risks.

Read all these instructions before using this electric tool and keep the safety instruction in a safe place.

Keep your work area clean and tidy. Untidy work places and workbenches increase the risk of accidents and injuries.

Do not expose the appliance to rain and do not use it in wet or moisture conditions.

Provide adequate lighting or good lighting conditions when working with the machine.

Do not work with electric tools in conditions with flammable liquids, gases or dust. Electric tools produce sparks able to ignite dust or fumes.

Protect yourself from electric shock.

Avoid body contact with earthed objects (for example pipes, radiators, electric stoves and cooling units). There is an increased risk of electric shock if your body is earthed.

Keep children and bystanders away while operating a power tool. Do not touch the electric tool or the cable. When not concentrated, you may lose control over the machine.

Ensure that you store electric tools in a safe place. Tools which are not in used must be stored in a dry place as high as possible out of the reach of children or in an inaccessible place.

Do not overload the machine. Use appropriate electric tools for your work. Working with appropriate electric tools is better and safer when within the specified power range. They will work better and more safely in the specified power range.

Do not use the electric tool for purposes for which it is not designed. For example, do not use a manual circular saw for cutting branches or logs.

Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. We recommend that you wear non-slip shoes when working outdoors. Wear a hairnet if you have long hair.

Use protective equipment which fit you. Wear safety goggles and ear protection at all times. A dust mask or respirator is also required. Wear tight-fitting gloves at all times when handling sharp blades and saw blades,

If dust exhausters and catchers are to be installed, make sure they are fitted and used properly. Using a dust exhauster may reduce the exposure to dust.

Do not use the cable in conflict with its designation, to carry or hang electric tools or to pull the plug out of socket. Protect the cable against high temperatures, oil, sharp edges or moving parts of the machine. Damaged or entangled cables increase the risk of electric shock.

Secure the workpiece. Use clamping equipment or a vice to secure the workpiece. This will be safer than holding it in your hand.

Avoid any abnormal body posture. Provide good stability and keep balance at all times. By this, electric tools are better controlled in unexpected situations.

Treat electric tools carefully. Check whether the moving parts work perfectly and do not drag, whether not broken or damaged to such an extent that functioning of electric tools could be affected. Have any damaged parts repaired before using the machine. Poor maintenance of electric tools is a cause of many injuries.

Keep the cutting tools sharp and clean. Carefully treated cutting tools with sharp edges get stuck less often and are easier to guide.

Follow the instructions for lubricating and changing tools.

Check the connection cable on the electric tool at regular intervals and have it replaced by an expert if it is damaged.

Check the extension cables at regular intervals and replace them if they are damaged.

Keep the handles dry, clean and free of oil and grease.

Pull the plug out of the socket and/or remove the battery when the tool is not in use before you make machine settings or change accessories, such as the saw blade, drill bit or cutter. This safety measure prevents unintentional starting of the electric tool.

Before starting any electric tool, remove any adjusting wrenches and screwdrivers. A tool or a wrench present in the rotating part of the machine may lead to injuries.

Prevent the machine from unintentional starting. Before plugging and/or connecting the machine to battery, handling or carrying, make sure the electric tools are switched off. Having a finger on the switch when carrying the electric tool or when the machine is on when plugging it may lead to injuries.

If you wish to work outdoors with an electric tool, only use extension cables which are approved for outdoor use and are marked accordingly. Using an extension cable suitable for outdoor use reduces the risk of electric shock.

Be careful, pay attention to what you are doing and use common sense when working with electric tools. Do not use electric tools when you are tired or under the influence of drugs, alcohol or pharmaceuticals. A moment if inattention when using electric tools may lead to serious injuries.

Check the machine for any damage. Before using the equipment again, the protective equipment must carefully be checked if safe and working as designated.

Check the moving parts for perfect functioning, if working smoothly and if no parts are damaged. To provide safe operation of the equipment, all parts must be installed properly and meet all conditions.

Damaged protective equipment and parts must be professionally repaired or replaced by a recognised professional workshop, unless otherwise specified in the Operating Instructions.

Do not use electric tools with a defective switch.

An electric tool that cannot be switched on or off is dangerous and must be repaired.

Have your electric tool repaired by an electrician.

This electric tools complies with the relevant safety regulations. Repairs may only be carried out by an electrician using genuine spare parts; otherwise the user may suffer accidents.

Caution!

The machine must be secured to the floor using suitable screws since otherwise there is a risk that it will tip over.

Inspect before each use.

• Proper function of the on and off button, incl. the emergency switch.
• Carry out a visual inspection before switching the appliance on.
• Check especially the safety equipment, electrical control elements, power lines and screw couplings for any damage and if they are tightened appropriately. If necessary, replace damaged parts before operation.
• Ensure that the bench clamping lever is tightly secured before starting up the machine.
• Ensure that the drill is safely secured in the clam - ping chuck.
• REMOVE ADJUSTING KEYS AND WRENCHES. From habit of checking to see that keys and adjusting wrenches are removed from tool before turning it "ON".

Risk of injury!

Keep body parts and clothes away from rotating parts of the device.

Use protective equipment which fit you.

Wear a hairnet if you have long hair.

Do not wear gloves when operating a drill.

Do not attempt to drill into a material that does not have a flat surface, unless you are using a suitable support.

Never start the drilling machine with the drill pressed against the workpiece.

Always use clamps, chuck jaws or a vice to secure the workpiece to the bench.

Set the drilling machine to a speed that is appropriate for the specific job.

In the event of a blockage, switch off the machine immediately. Pull out the mains plug and remove the jammed workpiece.

Chips and splinters must not be removed while the machine is running.

Mains Connection

Operation is only allowed with a safety switch against stray current (RCD max. stray current of 30mA).

Connect only to a single-phase AC current supply and only to the mains voltage specified on the rating plate. Must only be used from sockets with earth wire.

Only plug-in when machine is switched off.

Laser

Do not stare into beam. Do not point laser light at other persons.

Do not view directly into beam with optical instruments (binocular, telescope).

Do not point laser at reflective surfaces.

Avoid exposure to laser radiation. Laser may emit hazardous radiation.

Do not replace the installed laser with a different type.

Any repairs must only be carried out by the authorized service agent.

Maintenance

⚠️ Unplug the machine before any work on it.

Carry out a visual inspection before switching the appliance on.

The appliance must not be used if damaged or safety equipment is defective. Replace any worn-out and damaged parts.

Caution! If the power cord of the appliance gets damaged, it must be replaced by the manufacturer or its customer service or a similarly qualified person to avoid danger.

Repairs and works specified in these Instructions may only be performed by qualified authorised staff.

Use only original accessories and original spare parts.

Keep the device, in particular the air vents, clean at all times. Never spray water on the device body!

Do not clean the plastics with solvents, flammable or toxic fluids. For cleaning, use a damp cloth only.

Apply environment-friendly oil to all moving parts.

Only a regularly maintained and treated appliance can serve as a satisfactory aid. Insufficient maintenance and care can lead to unforeseen accidents and injuries.

If necessary, a list of spare parts can be found at www.guede.com.

Guarantee

Warranty period of 12 months applies to commercial use and 24 months applies to private use and commences on the day of purchase of the device.

The guarantee solely covers inadequacies caused by material defect or manufacturing defect. Original payment voucher with the sales date needs to be submitted for any claim in the guarantee period.

The guarantee does not cover any unauthorised use such as appliance overloading, use of violence, damage as a result of any unauthorised interference or caused by foreign items. Failing to follow the operating and assembly instructions and common wear are also not included in the guarantee.

Important information for the customer

Please be sure to know that returning the product in or after the warranty period must be made in the original packaging.

Service

Do you have any technical questions? Any claim? Do you need any spare parts or operating instructions? We will quickly help you and without needles bureaucracy at our web pages at www.guede.com in the Servicing part. Please help us be able to help you. In order to identify your device in case of claim we need the serial No., product No. and year of production. All this data can be found on the type label.

Tel.: [phone] / 700-360

Fax: [phone]

E-Mail: [e-mail]

Inspection and maintenance plan

Regular servicing period Before any	start-up	After every start-up	If necessary
Check the safety devices	√
Inspect and, if necessary, tighten the fan belts	√
Lubricate the columns and the bench with a thin layer of oil		√
Clean the tapered mandrel			√
Clean the machine of drilling dust or metal shavings		√

WAARSCHUWING/OPGELET!

Translation of the EC-Declaration of Conformity

We, hereby declare the conception and construction of the below mentioned appliances correspond - at the type of construction being launched - to appropriate basic safety and hygienic requirements of EC Directives.

In case of any change to the appliance not discussed with us the Declaration expires.

Notified Body Name: No: Adress:

Type Ex. Cert.-No.:

□ 97/68/EC_&2016/1628/EU

Emission No.:

2000/14/EC_2005/88/EC