BADRING 605.043.52 - Alarm system IKEA - Free user manual and instructions
Find the device manual for free BADRING 605.043.52 IKEA in PDF.
User questions about BADRING 605.043.52 IKEA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Alarm system in PDF format for free! Find your manual BADRING 605.043.52 - IKEA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BADRING 605.043.52 by IKEA.
USER MANUAL BADRING 605.043.52 IKEA
natural_image
Line drawing of a rectangular electronic device with a lid and top surface (no text or symbols)English 5
Deutsch 8
Français 11
Nederlands 14
Dansk 17
Íslenska 20
Norsk 23
Suomi 26
Svenska 29
Česky 32
Español 35
Italiano 38
Magyar 41
Polski 44
Eesti 47
Latviešu 50
Lietuvių 53
Portugues 56
Româna 59
Slovensky 62
Български 65
Hrvatski 68
Ελληνικά 71
Українська 74
Srpski 77
Slovenščina 80
Türkçe 83
عربي 87
English
Get started
BADRING water sensor detects the presence of water in indoor environments and sounds an alarm. It can be used with DIRIGERA hub and IKEA Home smart app to notify you of a water leak, even if you are away from home.
Get started with DIRIGERA hub
- Open the back of the sensor and insert an AAA/HR03 battery.
- Download the IKEA Home smart app and follow the instructions on your screen.
- Close the battery compartment and place the sensor wherever you want to monitor the presence of water.
Get started without DIRIGERA hub
- Open the back of the sensor and insert an AAA/HR03 battery.
- Close the battery compartment and place the sensor wherever you want to monitor the presence of water.
- The sensor is ready to use straight away.

IKEA Home smart app
For Apple devices, download the app using the App Store. For Android devices, download the app using Google Play store.
Get to know your product
You can use the sensor in damp locations, like bathrooms, laundry rooms or basements.
The sensor has two metal prongs underneath and will sound an alarm when both prongs come into contact with water.
The sensor has silicon feet to prevent it from moving around so there is no need to use double-sided tape or any other adhesive that may obstruct the flow of water.
Testing the alarm
We recommend testing the alarm to familiarize yourself with the way it sounds. Place the sensor with metal prongs facing down in a bowl filled with 1-2 mm of water. Note! Sensor's casing is not waterproof, make sure only metal prongs are submerged. The alarm will stop when the metal prongs underneath the sensor dry out.
The alarm will stop when the prongs underneath the sensor dry out.
Adding more sensors
You can connect as many sensors as you like to the DIRIGERA hub and IKEA Home smart app.
To add a new sensor follow the instructions in the IKEA Home smart app.
Battery care
When it's time to replace the battery, a red LED indicator will light up three times on the sensor and in the IKEA Home smart app you will be notified when the battery is low.
Changing the battery
Open the back of the sensor, insert a new AAA/HR03 battery and close it again.
Please note the safety information in this document concerning battery usage and disposal.
We recommend using 1 x IKEA LADDA 750 (AAA/HR03, 1.2V, 750mAh, Ni-MH). Sold separately.
Factory reset
Press the pairing button 4 times within 5 seconds.
Care instructions
To clean the product, wipe with a soft cloth moistened with a little mild detergent. Use another soft dry cloth to wipe it dry.
Never use abrasive cleaners or chemical solvents since this can damage the product.
Safety instructions
Please read this section carefully before using the product.
It contains important information and should be saved for future reference.
General safety
- This product is for indoor use only and can be used in temperatures ranging from 0°C to 40°C (32°F to 104°F).
- Do not leave the product in direct sunlight or near a heat source as it may overheat.
- Different building material and product location can affect wireless connectivity range.
WARNING!
Risk of explosion if battery is replaced by an incorrect battery type. Dispose of used batteries according to the instructions.
Technical data
Model: BADRING water leakage sensor
Type: E2202
Input: 1.2V, 1 x AAA/HR03 LADDA battery
Range: 10 m in open air.
For indoor use only
Operating frequency: 2405-2480 MHz
Output power: 7.3 dBm (EIRP)
IP-class: IP44
Keep this manual for future use.
Manufacturer: IKEA of Sweden AB
Address: Box 702, SE-343 81 Älmhult, SWEDEN

The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from household waste. The item should be handed in for recycling in accordance with local environmental regulations for waste disposal. By separating a marked item from household waste, you will help reduce the volume of waste sent to incinerators or land-fill and minimize any potential negative impact on human health and the environment. For more information, please contact your IKEA store.
Deutsch
Inbetriebnahme
Application IKEA Home smart
Alimentation: 1 pile LADDA 1.2 V, AAA/HR03
Fabricant : IKEA of Sweden AB
Adresse : Box 702, SE-343 81 Älmhult, SUÈDE

Producent: IKEA of Sweden AB
Framleiðandi: IKEA of Sweden AB
Heimilisfang: Box 702, SE-343 81 Älmhult, SWEDEN

Produsent: IKEA of Sweden AB
Adresse: Box 702, SE-343 81 Älmhult, SWEDEN

Producent: IKEA of Sweden AB
Adres: Box 702, SE-343 81 Älmhult, SZWECJA

Tootja: IKEA of Sweden AB
Aadress: Box 702, SE-343 81 Älmhult, SWEDEN
