301191 - Switch CSL - Free user manual and instructions

USER MANUAL 301191 CSL

White electronic device with three ports labeled Input 1, Output, and Input 5 (no additional text or symbols visible)

HDMI Switch 3 Pass Amplifier Selected Remote Control

5-Port HDMI switch with remote control

Thank you for having chosen this CSL product and for placing your trust in our company. Please read this manual carefully before installation to ensure your long-term enjoyment of this product. For future reference, please keep this manual.

1 Scope of delivery

• 5-Port HDMI switch with remote control
• Infrared receiver
• Remote control with batteries
• User manual

2 Technical specifications

Input 1x HDMI socket
Output 5x HDMI socket
Supported standards 3D, HDC	CP, CEC, 36Bit Deep Color, LPCM, DTS, DTS-HD, Dolby Digital, Dolby TrueHD
Supported resolutions 1080p	1080i, 720p, 720i, 576p, 576i, 480p, 480i, 640x480 bis 1920x1080
Vertical frequency range 50 /	60Hz
Supported video band-width	up to 2,5Gbit/s / 250MHz
Power supply 5V, via HDMI	Input (no separate power supply is required)
Power consumption max. 5W
Features • remote control (requires button control type CR2025, included in scope of delivery)Infrared receiver with 1m cablepossible automatic and und manuell switching on the HDMI switch,LED-display for active connection

3 Attributes

With this HDMI switch you can connect up to 5 devices to a HDMI interface. The switch detects if a connected device is turned on and switches automatically to the appropriate channel. Optionally, you can also switch manually between three channels by using the button on the top of the device.

4 Getting started

Please take the HDMI switch and infrared receiver out of the package. Then connect the connecting cable of the infrared receiver with the connection socket "IR" on the HDMI switch.

Unpack the remote control and remove the safety backing strip that sticks out of the battery compartment on the backside. Turn off all devices you want to connect and connect it with an appropriate HDMI cable with the switch.

Note: The HDMI switch receives electric power, which is required to run, directly via HDMI cable. For this purpose, there are extra lines for the power supply which are integrated by the HDMI standard.

The devices which are built for the European market, should provide a 5 volt power supply according to this specification. However, some devices are not able to provide this energy.

In this case, there is a port for a barrel connector on the HDMI switch (4.0 mm / 1.7 mm, 3.5 mm / 1.35 mm; inner conductor: Plus, outer conductor: minus / earth) in which your device with 5 V voltage can be supplied. With the help of a compatible power supply this problem can be solved.

5 Safety instructions and liability disclaimer

Never try to open the device to carry out repairs or conversions. Avoid contact with mains voltages. Do not short-circuit the product. The device is not certified for use in the open air; only use it in dry conditions. Protect it from high humidity, water and snow. Keep it away from high temperatures. Do not subject the device to sudden changes in temperature or heavy vibration as this might damage electronic components.

Examine the device for damage before using it. The unit should not be used if it has received an impact or has been damaged in any other way. Please observe national regulations and restrictions. Do not use the device for purposes other than those described in the instructions. This product is not a toy. Keep it out of the reach of children or mentally impaired persons. Any repair or alteration to the device not carried out by the original supplier, will invalidate the warranty or guarantee. The product may only be used by persons who have read and understood these instructions. The device specifications may change without any separate prior notice to this effect.

6 Disposal instructions

Electrical and electronic devices may only be disposed of in accordance with the European WEEE Directive and not with household rubbish. Components must be disposed of or recycled separately as dangerous, toxic elements can inflict sustained damage on the environment if they are disposed of incorrectly.

As a consumer, you are bound by the Electrical and Electronic Devices Act (ElektroG) to return electrical and electronic goods free of charge at the end of their useful life to the manufacturer, the place of purchase or to specially set up, public collection points. The details in each case are governed by national law. The symbol on the product, the operating instructions and/or the packaging refers to these regulations. By separating materials in this way, recycling and disposing of old devices, you are making an important contribution towards protecting our environment

7 Instructions on the disposal of batteries

With regard to the sale of batteries or the supply of devices containing batteries, the supplier is obliged to draw the customer's attention to the following:

As the end user, the customer has a statutory obligation to return used batteries. He can return old batteries stocked or previously stocked by the supplier in the form of new batteries to the supplier's despatch warehouse (despatch address) free of charge.

The symbols shown on the batteries have the following meanings: Pb = battery contains more than 0.004 percent by mass of lead, Cd = battery contains more than 0.002 percent by mass of cadmium, Hg = battery contains more than 0.0005 percent by mass of quicksilver.

The symbol of the rubbish bin with a cross through it indicates that the battery may not be put in household waste.

WEEE guideline: 2012/19/EU WEEE register number: DE 94495668

CSL Computer GmbH & Co. KG, herewith declares that this product 43120/20151209SZ012 conforms to the principle requirements and other relevant stipulations. The complete Declaration of Conformity can be obtained from: CSL Computer GmbH & Co. KG, Sokelantstraße 35, 30165 Hanover