02955 - Kettle Gourmetmaxx - Free user manual and instructions

USER MANUAL 02955 Gourmetmaxx

Black-and-white photo of a glass water heater and a small cup on a reflective surface (no text or symbols visible)

02955

DE

Gebrauchsanleitung

ab Seite 3

EN

Operating Instructions

starting on page 11

FR

Mode d'emploi

Labeled diagram of a glass coffee maker with numbered parts for identification

Safety Instructions 12

Items Supplied 14

Device Overview 15

Before Initial Use 15

Use 15

Cleaning and Care 16

Troubleshooting 17

Technical Data 17

Disposal 18

Dear Customer,

We are delighted that you have chosen this kettle.

Before using the device for the first time, please read through these operating instructions carefully and keep them for future reference and other users. They form an integral part of the device.

The manufacturer and importer do not accept any liability if the information in these operating instructions is not complied with.

If you have any questions about the device and about spare parts / accessories, please contact the customer service department via our website:

Explanation of the Symbols

Danger symbols: These symbols indicate risks of injury. Read through the associated safety notices carefully and follow them.

Caution: hot surfaces!

Read operating instructions before use!

Suitable for use with food.

Explanation of the Signal Words

DANGER warns of serious injuries and danger to life

WARNING warns of possible serious injuries and danger to life.

CAUTION warns of slight to moderate injuries

NOTICE warns of damage to property

Intended Use

• The device may only be used to heat up water, not for heating up milk or other liquids.
• The device is for personal domestic use only and is not intended for commercial applications.
• The device should only be used as described in the operating instructions. Any other use is deemed to be improper. Incorrect operation and incorrect handling may cause faults with the device and cause injury to the user.
• The warranty does not cover faults caused by incorrect handling, damage, calcification or repair attempts. This also applies to normal wear and tear.

Safety Instructions

WARNING: Read all safety notices, instructions, illustrations and technical data provided with this device. Failure to follow the safety notices and instructions may result in electric shock, fire and / or injuries.

This device may be used by children aged 8 and over and by people with reduced physical, sensory or mental abilities or a lack of experience and / or knowledge if they are supervised or have received instruction on how to use the device safely and have understood the dangers resulting from failure to comply with the relevant safety precautions.
■ Children must not play with the device.
- Cleaning and user maintenance may not be performed by children, unless they are older than 8 years of age and are supervised.
■ Children younger than 8 years of age and animals must be kept away from the device and the mains connecting cable.

CAUTION: hot surfaces!

The kettle will become very hot during use. Do not come into contact with heated parts while or after using the kettle! Only ever touch the handle when the kettle is in operation or contains hot water.

• The base station must always be disconnected from the mains power when left unattended and before cleaning it.

• Never immerse the kettle, base station or the mains connecting cable in water or other liquids and ensure that they cannot fall into water. There is a danger of electric shock from water.

• Never exceed the maximum fill level. If the kettle is overfilled, boiling water could escape from the pouring spout and the base station and mains connecting cable could become wet.

• Use the kettle only with the base station provided. Do not use the base station with other devices.
• Do not make any modifications to the device. Also do not replace the mains connecting cable yourself. If the kettle, the base station or the mains connecting cable are damaged, they must be replaced by the manufacturer, customer service department or a specialist workshop in order to avoid any hazards.
• The device is not designed to be operated with an external timer or a separate remote control system.
  Note the cleaning instructions in the “Cleaning and Care” chapter!

DANGER – Risk of Electric Shock

• Use and store the device only in closed rooms. Do not operate the device in rooms with high humidity.
• Should the base station fall into water, switch off the power supply immediately. Do not attempt to pull it out of the water while it is still connected to the mains power! Have the base station and the kettle checked in a specialist workshop before using it again.
• Never touch the base station and the mains connecting cable with wet hands when these components are connected to the mains power.
  Take the kettle off the base station to fill it, pour water or clean it. Make sure that no water gets into the contacts on the bottom of the kettle.

WARNING – Danger of Fire

• Do not use the device in rooms containing easily ignitable or explosive substances.
• Do not operate the device in the vicinity of combustible material. Do not place any combustible materials (e.g. cardboard, paper or plastic) on or in the device.
• Do not connect the device along with other consumers (with a high wattage) to a multiple socket in order to prevent overloading and a possible short circuit (fire).
• Do not use any extension cables.
• Do not cover the device during operation in order to prevent it from catching fire.

WARNING – Danger of Injury

• Keep children and animals away from plastic bags and films. There is a danger of suffocation.
  ■ Make sure that the mains connecting cable is always kept out of the reach of small children and animals. There is a danger of strangulation.

WARNING – Danger of Scalding

• Avoid coming into contact with the steam rising up from the pouring spout. Do not open the lid during the boiling process. Allow the device to cool down before filling it again! Otherwise there could be a blast of steam.
  ■ Pour out boiling water slowly and carefully without tipping the device too quickly.
• Do not move the device during the boiling process.
• The mains connecting cable must not hang down from the surface on which the device is placed in order to prevent the device from being pulled down.
• Do not use the device if it is cracked or its handle is loose or damaged. The kettle could shatter and the hot water could cause scalding.

NOTICE – Risk of Damage to Material and Property

The base station should only be connected to a properly installed plug socket with safety contacts. The socket must be readily accessible so that the connection to the mains can quickly be isolated. The mains voltage must be the same as that stated in the technical data for the base station.
■ Remove the mains plug if a fault occurs during operation or before a thunderstorm.
- Protect the device from other heat sources, naked flames, sub-zero temperatures, direct sunlight and collisions. Also protect the base station from persistent moisture and wet conditions.
- Allow the kettle to cool down before it is filled with cold water to prevent material damage.
■ Make sure that the mains connecting cable is not squashed, bent or laid over sharp edges and does not come into contact with hot surfaces (e. g. of the device).
- When the mains plug is removed from the plug socket, always pull on the mains plug and never the mains connecting cable. Do not pull or carry the base station by the mains connecting cable.
- Never place heavy objects on the base station or the mains connecting cable.
- Do not use the device if it has malfunctioned, fallen or been dropped in water. Have it checked in a specialist workshop before using it again.
- Only use original accessories from the manufacturer so as not to impair the functioning of the device and to prevent possible damage.

Items Supplied

• kettle
• base station with mains connecting cable
  • operating instructions

Check the items supplied for completeness and transport damage. If you find any damage to the device or accessories, do not use it, but contact our customer service department.

Device Overview

Labeled diagram of a glass coffee maker with numbered parts for identification

1 On / Off switch
2 Handle
3 Water level indicator
4 Base station (incl. cable winder)
5 LED lighting
6 Kettle
7 Pouring spout
8 Lid
9 Button for opening the lid

Before Initial Use

1. Remove any protective films and transport restraints that may be present from the device. Never remove the rating plate and any possible warnings!
2. To remove any possible production residues, fill the kettle (6) up to the top marking on the water level indicator (3) with drinking water before you first use it and let it boil up (see chapter "Use"). Pour away this water, do not drink it! Repeat this process twice.
3. Clean the kettle in the manner described in the "Cleaning and Care" chapter.

The kettle is now ready for operation!

Use

PLEASE NOTE!

• Be careful when pouring out hot water. There is a danger of scalding.
  The device should only be used out of the reach of small children and animals. The mains connecting cable must also be kept out of the reach of children. Otherwise they might use the cable to pull the device down on themselves. There is a danger of scalding.
  ■ The device may only be operated in an upright position, never tilted.

• Do not operate the device without water. If this does happen, the device switches off automatically. In this case, allow the device to cool down before cold water is poured in and the device is switched on.

• Wind up or unwind the mains connecting cable on the bottom of the base station (4) to the length you want and then place it in the slot which is provided for it on the edge of the base station.

• Insert the mains plug into a easily accessible socket.

• Place the base station on a dry, even, firm, water and heat-resistant surface. Do not place the device below kitchen wall units or similar cupboards. The rising steam could cause damage to them!

• Push the button for opening the lid (9) on the side marked PUSH with your thumb to unlock the lid (8) and open it by pulling the lid with your index finger.
• Fill the kettle (6) with at least 0.5 litres and max. 1.7 litres of water. Insufficient water will cause the device to switch off prematurely. If the top marking is exceeded, water could splash out during the boiling process.
• Close the lid. It must engage.
• Place the kettle on the base station.
• Push down the On / Off switch (1) on the side marked I. The device will turn on and the LED lighting (5) will illuminate. You can interrupt the boiling process at any time by pushing down the On / Off switch on the side marked O.
• The device automatically deactivates once the water has boiled. The On / Off switch sets automatically to Off position and the LED lighting switches off.
• Take the kettle off the base station and carefully pour the water into a vessel. Keep the lid closed when pouring out the water.

Cleaning and Care

PLEASE NOTE!

■ Regularly descale the device.
■ The device is not dishwasher-safe.

- Do not use any toxic, corrosive or abrasive cleaning agents or scouring sponges to clean the device. These can damage the surface.

• If necessary, wipe down the kettle (6) and the base station (5) with a clean, damp cloth.
• Keep the device ready to operate. Remove limescale deposits with a descaling agent. Follow the instructions on how to use the descaling agent.
• If the interior of the kettle is dirty, it can be rinsed carefully with detergent and clear water. Make sure that no water gets into the contacts on the bottom of the kettle! Do not immerse the kettle in water! This could cause a short circuit.
• If not in use, the kettle may be stored on the base station. However, be sure to pull the mains plug out of the socket.

Troubleshooting

If the device does not work properly, check whether you are able to rectify the problem yourself. If the problem cannot be solved with the steps that are listed, contact the customer service department.

Do not attempt to repair a electrical device yourself!

Problem Possible	cause Fix
The device cannot be switched on.	Has the device overheated? Wait until it has cooled down, then fi ll it with water and try again.
	Is the mains plug not inserted in the plug socket correctly?	Correct the fi t of the mains plug.
	The socket is defective. Try another plug socket.
	No mains voltage is present. Check the fuse of the electrical distributor (fuse box).
The fuse in the electrical distrib- utor (fuse box) is triggered.	Too many devices connected to the same circuit.	Reduce the number of devices in the circuit.
The device switch-es off before the water has boiled.	Is the amount of water less than 0.5 litres?	Pour in more water.
The device does not switch off.	Is the lid (8) not properly closed?	Close the lid properly.
During use, an unpleasant smell is detected.	The device is being used for the fi rst time.	A smell often develops when new devices are fi rst used. The smell should disappear once the device has been used several times.
	The device has just been descaled.	Rinse out the device with clear water.

Technical Data

Article number: 02955

Model: FY-488

Voltage supply: 220 – 240 V \~ 50 / 60 Hz

Power: 1850 – 2200 W

Protection class: I

Capacity: 1.7 litres

Manual ID: Z 02955 M DS V1 1218

Disposal

Dispose of packaging materials in an environmentally sound way and take recyclables to collection facilities.

This device is governed by the European Directive 2012/19/EU on waste electrical and electronic equipment (WEEE). Do not dispose of this device as normal domestic waste, but rather in an environmentally friendly manner via an offi cially approved waste disposal company.

Customer Service / Importer:

DS Produkte GmbH

Am Heisterbusch 1, 19258 Gallin, Germany

Tel.: [phone] *

*) Calls to German landlines are subject to charges. The cost varies, depending on the service provider.

All rights reserved.

Contenu

WAARSCHUWING – Brandgevaar

WAARSCHUWING – Verbrandingsgevaar

Labeled diagram of a glass coffee maker with numbered parts for identification