Zeno 35.1163.01 - Weather Station TFA - Free user manual and instructions

USER MANUAL Zeno 35.1163.01 TFA

Operating Instructions

Mode d'emploi

Thank you for choosing this instrument from TFA.

Before you use this product

• Please make sure you read the instruction manual carefully.
- The operating instructions are enclosed with the device or can be downloaded at www.tfa-dostmann.de/en/
service/downloads/instruction-manuals
- This product should only be used as described within these instructions.
- Following and respecting the instructions in your manual will prevent damage to your instrument and loss of your statutory rights arising from defects due to incorrect use. We shall not be liable for any damage occurring as a result of non-following of those instructions.
- Please take particular note of the safety advice!
- Please keep this instruction manual safe for future reference.

F

Row of seven weather icons showing sun, cloud, rain, and lightning (no text or symbols)

Wireless Weather Station

GB

1. Delivery contents

• Wireless weather station (base station)

• Temperature transmitter (Cat. No. 30.3248.02)

• Instruction manual

2. Range of application and all the benefits of your new instrument at a glance

- Radio controlled clock with large display

- Outdoor temperature wireless (433 MHz), distance range up to 100 m (open field)

- Indoor temperature

• Permanent indication of maximum and minimum temperatures

- Weather forecast with symbols and atmospheric pressure trend

• Alarm with snooze function

- Date display

• Manual setting option of time and time zone

• Wall mounting or table stand

- Optional: Expandable up to 3 temperature transmitters (sold separately), also for the temperature control of remote rooms, e.g. children's room, wine cellar etc.

3. Safety notices

• This product is exclusively intended for the range of application described above.

WARNING

• Keep the devices and the batteries out of reach of children.
• Small parts can be swallowed by children (under three years old).
• Batteries contain harmful acids and may be hazardous if swallowed. If a battery is swallowed, this can lead to serious internal burns and death within two hours. If you suspect a battery could have been swallowed or otherwise caught in the body, seek medical help immediately.
• Batteries must not be thrown into a fire, short-circuited, taken apart or recharged. Risk of explosion!
• Low batteries should be changed as soon as possible to prevent damage caused by leaking. Make sure the polarities are correct. Never use a combination of old and new batteries together, nor batteries of different types. Remove the batteries if the device will not be used for an extended period of time. Wear chemical-resistant protective gloves and safety glasses when handling leaking batteries.

Wireless Weather Station

CAUTION

• Unauthorized repairs, alterations or changes to the product are prohibited.
• Do not expose the device to extreme temperatures, vibrations or shocks.
• Clean the device with a soft damp cloth. Do not use solvents or scouring agents.
• The base station is only suitable for indoor use. Protect it from moisture!
  • The transmitter is splashproof, but not watertight.

4. Elements

Base station (Receiver)

A: LCD display (Fig. 1):

A 1: Time zone A 2: DCF reception symbol
A 3: Time/date A 4: Snooze symbol
A 5: Alarm symbol A 6: Transmitter reception symbol
A 7: Channel number A 8: Battery symbol for the transmitter
A 9: Symbol for alternating channels A 10: Maximum value (MAX)
A 11: Outdoor temperature A 12: Minimum value (MIN)
A 13: Atmospheric pressure trend A 14: Weather forecast with symbols
A 15: Indoor temperature A 16: Battery symbol for the base station

B: Buttons (Fig. 2):

B 1: MODE button B 2: CHANNEL button

B 3: ALARM button

B 5: DOWN/RCC button

B 4: UP/MAX/MIN button

C: Housing (Fig. 2):

C 1: Wall mounting hole C 2: Battery compartment

C 3: Stand (fold out)

D: Outdoor Iranmitter (Fig. 3):

D 1: Transmission Indication LED
D 3: Outdoor temperature
D 5: Battery symbol for the transmitter
D 7: Channel switch 1,2,3
D 2: Transmission symbol
D 4: Channel number
D 6: Wall mounting hole
D 8: Battery compartment

GB

Wireless Weather Station

5. Getting started

5.1 Insert the batteries

• Remove the protective film from the display.
• Place the base station and the transmitter on a table at a distance of about 1.5 meters from each other. Avoid being close to possible sources of interference such as electronic devices and radio equipment.
• Open the battery compartment of the base station and insert two new AA 1.5V batteries, polarity as illustrated.
• The device will alert you with a beep and all LCD segments will be displayed for a short moment. The indoor temperature with highest and lowest values appears on the display.
• Close the battery cover again.
• Open the battery compartment of the transmitter and insert two new AAA 1.5 V batteries, polarity as illustrated. The switch is set to channel 1.
  • The indicator light lights up briefly. The outdoor temperature is shown. Close the battery cover again.

5.2 Outdoor values reception

• The base station will scan the outdoor temperature for three minutes and the reception symbol flashes.
• If the reception of the outdoor temperature falls, ^2 - ^- - ^- remains on the display. Check the batteries and try it again.
• You can also start the outdoor transmitter search manually later (e.g. if the transmitter is lost or if the batteries are changed). Press and hold the CHANNEL button on the base station for two seconds. The last registered transmitter (channel) will be cancelled and "-" appears on the display. During the transmitter search the maximum and minimum values are automatically reset.

5.3 Radio-controlled time reception

• The clock will now scan the DCF frequency signal and the DCF symbol flashes on the display. When the time code is successfully received after some minutes, the radio-controlled time and the DCF symbol will be shown steadily on the display.
• If there is no reception, you can start the initialisation manually. Press and hold the DOWN/RCC button for 2 seconds.
  • The DCF symbol flashes.
• Interrupt the reception by pressing the DOWN/RCC button again for two seconds. The DCF reception symbol disappears.
• The DCF reception always takes place daily at 1:00, 2:00, 3:00, 4:00 and 5:00 o'clock in the morning.

• There are three different reception states:

《》

flashing - reception is active

remains – reception is successful

disappears – no reception

- If the clock cannot detect the DCF-signal (e.g. due to interference, transmitting distance, etc.), the time can be set manually. The clock will then work as a normal quartz clock (see: "Manual settings").

Wireless Weather Station

5.4 Note on radio-controlled time

• The time is transmitted from an atomic clock near Frankfurt am Main by a DCF-77 (77.5 kHz) frequency signal with a range of about 1,500 km. Your radio-controlled clock receives the signal, converts it and always shows the exact time. The adjustment of Daylight Saving Time and Standard Time is also automatic.
• During night-time, the atmospheric interference is usually less severe. A single daily reception is adequate to keep the accuracy deviation under 1 second. In extreme cases, please place the unit close to a window to improve reception.

6. Operation

• The device will automatically quit the setting mode if no button is pressed for 15 seconds.
- Press and hold the UP/MAX/MIN or DOWN/RCC button in setting mode for fast mode.

6.1 Manual settings

• Press and hold the MODE button for two seconds to enter the setting mode.
  • The first adjustable value flashes on the display.
• Use the UP/MAX/MIN or DOWN/RCC button to make the desired setting, while the value flashes.
• Confirm with the MODE button and go to the next setting.
  • The sequence is shown as follows:

-Year, month, day
- Hours, minutes
- Time zone +12/-12 (default: ZONE 00)
- DCF reception ON/OFF (default: ON)

6.1.1 Time zone setting

• In the setting mode you can make the time zone correction +12/-12).
• The time zone correction is needed for countries where the DCF signal can be received but the time zone is different from the DCF time (e.g. +1=one hour plus).

6.1.2 DCF reception

• By default, the DCF reception is activated (ON) and after successful reception of the DCF signal no manual time setting is necessary.
• Once the DCF time reception is deactivated (OFF) the time and date must be manually set.
• If the DCF reception is activated, the manually set time will be overwritten by the DCF time when the signal is received successfully.

Wireless Weather Station

6.2 Date display

- With the MODE button you can switch between the display of time and date. The sequence is shown as follows: time, year, month, date. The display automatically switches back to the current time display.

7. Maximum and minimum temperatures

• The maximum and minimum outdoor and indoor temperatures since the last reset are permanently displayed.
• Press and hold the UP/MAX/MIN button for 3 seconds. All MAX/MIN values will be deleted and reset to the current state.

8. Forecast

8.1 Weather forecast symbols

• The weather station has 7 different weather symbols:

sunny slightly cloudy cloudy rainy thunderstorm snowfall thunderstorm

(rain) (snow)

• A snow crystal (symbol 6 and 7) is shown if rain or thunderstorm is forecasted and the outdoor temperature on channel 1 is under 0^ . If no transmitter is connected on channel 1, the device uses the values of channel 2 or 3. If this respective transmitter is not situated outside or if there is no transmitter connected, there will be no snow forecast.
• The weather forecast relates to a range of 6 to 12 hours and indicates only a general weather trend. For example, if the current weather is cloudy and the rain symbol is displayed, it does not mean the product is faulty because it is not raining. It simply means that the air pressure has dropped and the weather is expected to get worse but not necessarily rain.

8.2 Trend arrows

- The trend arrows on the display will show whether the atmospheric pressure of the last 3 hours is increasing, steady or decreasing.

Increase (+1-2 nPa) Weather Improvement
↑ Fast increase ( >+2hPa ) Significant weather improvement

Wireless Weather Station

GB

→	Steady (+1hPa) Stable weather conditions
↘	Decrease (-1-2 hPa) Weather deterioration
↓	Fast decrease(> -2hPa) Significant weather deterioration

9. Alarm mode

- Press the ALARM button in normal mode to enter the alarm mode. 7:00 (default) or the last adjusted alarm time appear on the display. Press again the ALARM button. The alarm is activated and the alarm symbol appears on the display. Press again the ALARM button to deactivate the alarm function. The alarm symbol disappears. The display automatically switches back to the current time display after 5 seconds.

9.1 Alarm time setting

• Press and hold the ALARM button for three seconds to enter the alarm setting mode.
  • The alarm symbol and the hour digit are flashing. Press the UP/MAX/MIN or DOWN/RCC button to adjust the hours
• Confirm the setting with the ALARM button and set minutes in the same way.
• Press the ALARM button again to return to the current time.
  • The alarm is activated and the alarm symbol appears on the display.

9.2 Alarm process

• When the alarm is activated, the alarm starts to ring when the set alarm time is reached. The alarm symbol flashes
• If the alarm is not stopped manually, the ascending alarm tone automatically turns off after two minutes and the alarm will be reactivated at the same set time on the following day.
• Press any button to turn off the alarm sound and to activate the snooze function. The snooze symbol flashes.
  • The alarm will be interrupted for about 5 minutes.

- Press any button to stop the alarm function.

10. Positioning and mounting of the base station and the transmitter

• When placed outdoors, choose a shady and dry place for the transmitter. Direct sunlight may trigger incorrect measure-
  ment and continuous humidity damages the electronic components needless
• Place the base station in any room of the house. Make sure to avoid the vicinity of any source of interference such as computer screens, TV sets or solid metal objects.

Wireless Weather Station

GB

• Once the desired location is chosen, check whether the transmission from the transmitter to the base station is possible (transmission range of up to 100m in open areas). Within solid walls, especially ones with metal parts, the transmission range can be reduced considerably.
• If necessary, choose, another position for the outdoor transmitter and/or receiver.
• If the transmission is successful, you can place or wall mount the base station and the outdoor transmitter with the suspension device.

11. Battery replacement

• As soon as the corresponding battery symbol appears in the display, please change the batteries of the base station or transmitter.
• Please note: When the batteries are changed, the contact between the outdoor transmitter and the base station must be restored – so always restart both devices or start a manual transmitter search.

12. Additional outdoor transmitters (optional)

• When having more than one external transmitter (maximum 3), select a different channel for each one with the 1/2/3 switch inside the transmitter's battery compartment. Insert two new AAA 1.5 V batteries, polarity as illustrated. Start the base station operation or the manual search for the outdoor transmitters.
• For the manual search choose the respective transmitter by pressing the CHANNEL button.
• Press and hold the CHANNEL button for two seconds. The last registered transmitter (channel) will be cancelled and the transmitter search begins.
• The outdoor temperature with highest and lowest values and the channel number appear on the base station display. If you have installed more than one outdoor transmitter, press the CHANNEL button on the base station to change between the channels 1 to 3.
• You can also choose an alternating channel display. Press the CHANNEL button. After the last registered channel (1 to 3) a circle symbol will appear. To deactivate the function press the CHANNEL button again.
• After a successful installation of the outdoor transmitters close the battery compartments carefully

13. Troubleshooting

Problem Solution

No indication on the → Ensure the batteries' polarities are correct

base station/transmitter → Change the batteries

No transmitter reception → No transmitter installed

Display "---" → Check the outdoor transmitter's batteries

for channel 1/2/3 (only use batteries/rechargeable batteries with 1.5V voltage!)

→ Restart the transmitter and the base station according to the manual

Wireless Weather Station

GB

	→ Start the manual transmitter search: Press the CHANNEL button for 2 seconds
	→ Choose another place for the outdoor transmitter and/or the base station
	→ Reduce the distance between the outdoor transmitter and the base station
	→ Check if there is any source of interference.
No DCF reception	→ Press and hold the DOWN/RCC button for two seconds and start the initialisation manually
	→ Wait for an attempt reception during the night
	→ Choose another place for your device
	→ Set the clock manually
	→ Check if there is any source of interference
	→ Restart the instrument according to the manual

Incorrect indication → Change the batteries

If your device fails to work despite these measures, contact the retailer where you purchased the product.

14. Waste disposal

This product and its packaging have been manufactured using high-grade materials and components which can be recycled and reused. This reduces waste and protects the environment.

Dispose of the packaging in an environmentally friendly manner using the collection systems that have been set up.

Disposal of the electrical device

Remove non-permanently installed batteries and rechargeable batteries from the device and dispose of them separately.

This product is labelled in accordance with the EU Waste Electrical and Electronic Equipment Directive (WEEE). Please do not dispose of this product in ordinary household waste. As a consumer, you are required to take end-of-life devices to a designated collection point for the disposal of electrical and electronic equipment, in order to ensure environmentally-compatible disposal. Observe the current regulations in place!

Disposal of the batteries

Never dispose of empty batteries and rechargeable batteries with ordinary household waste. They contain pollutants which, if improperly disposed of, can harm the environment and human health. As a consumer, you are required by law to take them to your retail store or to an appropriate collection site depending on national or local regulations in order to protect the environment.

The symbols for the contained heavy metals are:

Cd=cadmium, Hg=mercury, Pb=lead.

Wireless Weather Station

GB

15. Specifications

Base station

Power consumption 2 x AA 1,5 V batteries (not included) We recommend Alkaline batteries

Measuring range

temperature -10°C ... 50°C

Housing dimension 216 x 28 (67) x 160 mm

Weight 302 g (device only)

Outdoor transmitter

Power consumption Batteries 2 x AAA 1.5 V (not included) We recommend Alkaline batteries

Measuring range

temperature -40°C ... 70°C

Range max. 100 m (open field)

Transmission frequency 433 MHz

Maximum

radio-frequency power < 10mW

Display LL.L /HH.H Temperature is outside measuring range

Housing dimension 40 x 105 x 26 mm

Weight 41 g (device only)

No part of this manual may be reproduced without written consent of TFA Dosimann. The technical data are correct at the time of going to print and may change without prior notice. The latest technical data and information about this product can be found in our homepage by simply entering the product number in the search box.

EU Declaration of conformity

Herby, TFA Dostmann declares that the radio equipment type 35.1163 is in compliance with Directive 2014SS/EU. The full text of the EU declaration of conformity is available at the following internet address: www.fta-dostmann.de/service/downloads/te

www.lfa-dostmann.de

Alimentation Piles 2 x 1.5 V AA (non incluses)

Alimentation Piles 2 x 1.5 V AAA (non incluses)

The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated underscores where none should exist based on the GT's visual context. Hence, the OCR result is inconsistent with the Ground Truth.

Draadloze weerstation

LET OP