60.2038.01 - Clock TFA - Free user manual and instructions

USER MANUAL 60.2038.01 TFA

C 5: AL ON/OFF Taste C 6: MIN Taste

Thank you for choosing this product from TFA.

1. Before you use this product

- Please make sure you read the instruction manual carefully.

• This information will help you to familiarize yourself with your new device, to learn all of its functions and parts, to find out important details about its first use and how to operate it and to get advice in the event of a malfunction.
• Following and respecting the instructions in your manual will prevent damage to your instrument and loss of your statutory rights arising from defects due to incorrect use.
• Likewise, we take no responsibility for any incorrect readings or for any consequences resulting from them.
• We shall not be liable for any damage occurring as a result of non-following of these instructions.
• Please pay particular attention to the safety notices!
• Please keep this instruction manual safe for future reference.

2. Delivery contents

• Digital alarm clock
• Instruction manual

1. Range of application and all the benefits of your new instrument at a glance

• Optionally LCD display or LED digits

• Automatic switchover via light sensor can be activated

- Battery-operated, does not require a mains connection - Two brightness levels and automatic dimming mode.

- Two brightness levels and automatic dimming mode (LED) - Alarm with anoza function

- Alarm with Smoze function

1. For your safety

2. This product is exclusively intended for the range of application described above. It should only be used as described within these instructions.

3. Unauthorised repairs, alterations or changes to the product are prohibited.

Caution!

Risk of injury!

• Keep this device and the batteries out of reach of children.
• Small parts can be swallowed by children (under three years old).
• Batteries contain harmful acids and may be hazardous if swallowed. If a battery is swallowed, this can lead to serious internal burns and death within two hours. If you suspect a battery could have been swallowed or otherwise caught in the body, seek medical help immediately.
• Batteries must not be thrown into a fire, short-circuited, taken apart or recharged. Risk of explosion!

-18--19-

Digital alarm clock

- Low batteries should be changed as soon as possible to prevent damage caused by leaking. Make sure the polarities are correct. Never use a combination of old and new batteries together, nor batteries of different types. Remove the batteries if the device will not be used for an extended period of time. Avoid contact with skin, eyes and mucous membranes when handling leaking batteries. In case of contact, immediately rinse the affected areas with water and consult a doctor.

Important information on product safety!

- Do not expose the device to extreme temperatures, vibrations or shocks. - The device is suitable for indoor use only. Protect it from moisture!

5. Elements

A: LED display (Fig. 1):

A 1: Time / alarm time A 2: Snooze symbol
A 3: PM (12-hour system) A 4: Alarm symbol

B: LCD display (Fig. 2):

B 1: Time / alarm time B 2: Alarm symbol
B 3: Snooze symbol B 4: PM (12-hour system)

C: Buttons and switches (Fig. 3):

C 1: SNOOZE/AL STOP sensor button C 2: TIME SET/AL SET/LOCK switch

C 3: AUTO/LED/LCD switch C 4: HOUR/12/24 button

C 5: AL ON/OFF button C 6: MIN button

C 7: Brightness switch High/Low

D: Housing (Fig. 2+3):

D 1: Light sensor D 2: Wall mounting hole

D 3: Battery compartment

6. Getting started

- Open the battery compartment and insert four new AA 1.5 V batteries, polarity as illustrated. Ensure the batteries do not spring free from the contacts.

• The device will alert you with a beep.

- Close the battery compartment.

• 12:00 appears on the display.

7. Time

7.1 12-HR or 24-HR system

- Slide the switch to the position LOCK

-20--21-

Digital alarm clock

• Press the HOUR/12/24 button in normal mode.
• 12H or 24H appears on the display (default 12H)
• Select the desired format.
• After 30 seconds, the display automatically reverts to the clock mode.

7.2 Time setting

• Slide the switch to the position TIME SET.
• The time flashes on the display
• Press the HOUR/12/24 button to adjust the hours.
• Press the MIN button to adjust the minutes
• Press and hold the button for quick setting.

- Slide the switch to the position LOCK.

8. Alarm clock function

8.1 Alarm time setting

• Slide the switch to the position AL SET
• The alarm symbol and 6:00 (default) or the last adjusted alarm time flash on the display.
• Press the HOUR/12/24 button to adjust the hours.
• Press the MIN button to adjust the minutes
• Press and hold the button for quick setting.

- Slide the switch to the position LOCK

- The display automatically reverts to the clock mode. The alarm is activated and the alarm symbol will appear on the display.

8.2 Activate/deactivate alarm

• Press the AL ON/OFF button in normal mode to activate or deactivate the alarm function.
  • The alarm time and the alarm symbol appear on the display. The alarm symbol flashes.
• After 3 seconds, the display automatically reverts to the clock mode. The alarm symbol remains on the display, if the alarm is activated.
• When the adjusted alarm time is reached, the alarm rings.
• Press the SNOOZE/AL STOP sensor button to turn off the alarm.
  • Note: If the snooze function is activated (snooze symbol visible), the snooze function is started.
• If the alarm is not stopped manually, the alarm tone automatically turns off after 90 seconds and will be reactivated at the same set time in the following day.
  • The alarm symbol remains on the display.
• Press the AL ON/OFF button in normal mode, to deactivate the alarm function. The alarm symbol disappears.

8.3 Snooze function

• To activate or deactivate the snooze function, press and hold the HOUR/12/24 button for 2 seconds in normal mode (if the alarm is activated). The snooze symbol appears permanently when the snooze function is activated.
• When the adjusted alarm time is reached, the alarm rings.

-22--23-

Digital alarm clock

• Press the SNOOZE/AL STOP sensor button to start the snooze function.
• The snooze symbol flashes on the display.
  • The alarm sound will be interrupted for 7 minutes.
• You can start the snooze function up to 3 times.
• Press any button to stop the snooze function.
• To deactivate the snooze function, press and hold the HOUR/12/24 button for 2 seconds in normal mode. The snooze symbol will disappear.

9. Switch LCD-LED

• Use the AUTO/LED/LCD switch to choose between the LCD or LED display.
• If you move the switch to AUTO, the LED display turns on automatically as soon as the light sensor registers darkness.

10. LED brightness

• You can adjust the brightness of the LED display in 2 steps (LOW or HIGH) with the slide switch.
  • In LED mode, the weak backlight will automatically turn on between 8pm to 6am.

11. Dots between the hour and minute indicators

• The two dots flash every second on the display.
  • To activate or deactivate the function, press the AL ON/OFF button for 2 seconds in normal mode.

12. Battery replacement

• Change the batteries when the device functions become weak.
• Open the battery compartment and insert four new AA 1.5 V batteries, polarity as illustrated.
• Close the battery compartment.

13. Care and maintenance

• Clean the device with a soft damp cloth. Do not use solvents or scouring agents.
• Remove the batteries if the device will not be used for an extended period of time.
• Store the device in a dry place.

14. Troubleshooting

Problem Solution

No display → Ensure the batteries' polarities are correct

→ Change the batteries

Incorrect indication → Change the batteries

If your device fails to work despite these measures, please contact the retailer where you purchased the product from for advice.

-24--25-

Digital alarm clock

15. Waste disposal

This product and its packaging have been manufactured using high-grade materials and components which can be recycled and reused. This reduces waste and protects the environment.

Dispose of the packaging in an environmentally friendly manner using the collection systems that have been set up.

Disposal of the electrical device

Remove non-permanently installed batteries and rechargeable batteries from the device and dispose of them separately.
This product is labelled in accordance with the EU Waste Electrical and Electronic Equipment Directive (WEEE).
This product must not be disposed of in ordinary household waste. As a consumer, you are required to take end-of-life devices to a designated collection point for the disposal of electrical and electronic equipment, in order to ensure environmentally-compatible disposal. The return service is free of charge. Observe the current regulations in place!

Disposal of the batteries

Never dispose of empty batteries and rechargeable batteries with ordinary household waste. They contain pollutants which, if improperly disposed of, can harm the environment and human health. As a consumer, you are required by law to take them to your retail store or to an appropriate collection site depending on national or local regulations in order to protect the environment. The return service is free of charge.

The symbols for the contained heavy metals are: Cd=cadmium, Hg=mercury, Pb=lead.

Power consumption: Batteries 4 x AA 1.5 V (not included)

Housing dimension: 130 x 41 x 65 mm

Weight: 104 g (device only)

No part of this manual may be reproduced without written consent of TFA Dostmann. The technical data are correct at the time of going to print and may change without prior notice.

The latest technical data and information about this product can be found in our homepage by simply entering the product number in the search box.

www.lfa-dosimann.de

Alimentation : Piles 4 x 1.5 V AA (non incluses)

2. La fornitura include