Matrix BDCMTHVI - Compressor BLACK & DECKER - Free user manual and instructions

USER MANUAL Matrix BDCMTHVI BLACK & DECKER

English (original instructions) 3

Technical diagram of a mechanical device with numbered parts, including a pump and various connector assemblies.

Components

1 Inflator attachment
2 Inflator port
3 Deflator port
4 Pins
5 Inflator head
6 Small Nozzle
7 Medium Nozzle
8 Large Nozzle
9 Nozzle notches
10 Nozzle storage

Composants

WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

WARNING: To reduce the risk of injury, read the instruction manual.

Intended Use

This inflator is intended solely for high-flow inflation of rafts, air mattresses, swimming pool floats, etc. This product is intended for household, consumer use only.

DO nOT use under wet conditions or in presence of flammable liquids or gases.

DO nOT let children come into contact with the tool. Supervision is required when inexperienced operators use this tool.

WARNING: Read all safety warnings and instructions provided with this attachment and the Power Unit BDCDMT120 before using this attachment

Definitions: Safety Alert Symbols and Words

This instruction manual uses the following safety alert symbols and words to alert you to hazardous situations and your risk of personal injury or property damage.

DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

(Used without word) Indicates a safety related message.

NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in property damage.

ADDITIONAL SAFETY WARNINGS FOR YOUR INFLATOR

WARNING: Keep hair, jewelry, and loose clothing away from events, openings, and deflator port.

WARNING: FOR HOME AND CAR USE ONLY: Inflate room, swimming pool floats, air mattresses, and more in and around the home. Recommended maximum continuous duty at 65 psi is 2 minutes on with 5 minutes off.

WARNING: RISK TO BREATHING. The compressed air from your inflator is not safe for breathing. Never inhale air from your inflator or from a breathing device connected to the inflator.

WARNING: DO NOT direct inflator port towards face.

WARNING: DO NOT block inflation port when is varying or deflating.

WARNING: DO NOT place fingers or other objects in the refrigerator port hole.

WARNING: Ensure the deflator port is not obstructed when in use.

WARNING: RISK OF BURSTING. Too much air pressure causes a hazardous risk of bursting. Check the manufacturer's maximum pressure rating for objects being inflated.

WARNING: RISK OF BURSTING. Do not leave inflator ranging unattended.

WARNING: RISK OF FIRE: Inflator can become hot during use. Allow inflator to cool 30 minutes before storing away.

CALIFORNIA PROPOSITION 65

WARNING: This product or its power cord contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling

The label on your tool may include the following symbols. The symbols and their definitions are as follows:

V....volts

Hz hertz

min......minutes

- - - - or DC.....direct current

Class I Construction (grounded)

.../min.....per minute

BPM.....beats per minute

Class II Construction (double insulated)

n_0 .....no load speed n .....rated speed

⊕......earthing terminal

⚠️......safety alert symbol

△......visible radiation

F....wearrespiratory protection

wear eye protection

○....wearhearing protection

readall documentation

ASSEMBLY AND ADJUSTMENTS

WARNING: To reduce the risk of serious personal injury, turn unit off and remove the battery pack before making any adjustments or removing/installing attachments or accessories, when replacing line, or prior to cleaning. An accidental start-up can cause injury.

Attaching and Removing Nozzles (Fig. A, B)

- To attached a nozzle (6, 7, 8), line up the notches 9 on the nozzle with the pins 4 on the inflator port 2. Once fully on, turn the nozzle clockwise.

- To remove, turn the nozzle counterclockwise fully and slide the nozzle off.

• After removing the nozzle, place it in the nozzle storage 10.

OPERATION

WARNING: To reduce the risk of serious personal injury, turn unit off and remove the battery pack before making any adjustments or removing/installing attachments or accessories, when replacing line, or prior to cleaning. An accidental start-up can cause injury.

WARNING: Shock hazard. Under no circumstances should this product be used near water.

WARNING: To reduce the risk of injury, turn off and remove battery from tool or disconnect plug from power source before making any adjustments or removing or installing attachments or accessories. Remove any accessory from the attachment before removing or installing the attachment.

General Use of Nozzles

• Small Nozzle 6: beachballs, rafts, and other inflatables with a small valve.
  • Medium Nozzle 7: small inflatable pools
  • Large Nozzle 8: air mattresses

Inflating (Fig. B, C)

• Attach a nozzle (6, 7, 8) to the inflator port 2 as shown in Fig. A, B
• Insert the inflator port into the inflatable.
• To switch the tool on, press the variable-speed switch on the Power Unit. The tool speed depends on how far you press the switch.
• To switch the tool off, release the variable-speed switch.

NOTE: This attachment only operates in the forward direction, the forward/reverse slider of the Power Unit should not be able to be switched to reverse.

NOTE: Operate your inflator only with the nozzles included.

NOTE: Many inflatables, especially air mattresses, have an internal flap that prevents air loss during inflation. Unless this flap is displaced by the nozzle, the mattress will not inflate. Push the nozzle firmly into the valve to ensure that you push this flap out of the way.

Deflating (Fig. D, E)

• Attach a nozzle (6, 7, 8) by pushing the nozzle into the delfator port 3 as shown in Fig. D
• Insert the nozzle into the inflatable as shown in Fig. E.
• To switch the tool on, press the variable-speed switch on the Power Unit. The tool speed depends on how far you press the switch.
  • To switch the tool off, release the variable-speed switch.

Positioning (Fig. F)

The inflator port 2 can be positioned in 10 different orientations.

- Turn the inflator head 5 until it clicks out of its current position and into the next. Continue rotating until the inflator port is in the desired location.

MAINTENANCE

WARNING: To reduce the risk of serious personal injury, turn unit off and remove the battery pack before making any adjustments or removing/installing attachments or accessories, when replacing line, or prior to cleaning. An accidental start-up can cause injury.

Your BLACK+DECKER power tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning.

Cleaning

WARNING: Never use solvents or other harsh chemicals for cleaning the non-metallic parts of the tool. These chemicals may weaken the plastic materials used in these parts. Use a cloth dampened only with water and mild soap. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.

Accessories

WARNING: Since accessories, other than those acquired by BLACK+DECKER, have not been tested with this product, use of such accessories with this tool could be hazardous. To reduce the risk of injury, only BLACK+DECKER recommended accessories should be used with this product.

Recommended accessories for use with your tool are available at extra cost from your local dealer or authorized service center. If you need assistance in locating any accessory, please contact BLACK+DECKER call 1-800-544-6986.

Repairs

The charger and battery pack are not serviceable. There are no serviceable parts inside the charger or battery pack.

WARNING: To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (including brush inspection and replacement, when applicable) should be performed by a BLACK+DECKER factory service center or a BLACK+DECKER authorized service center. Always use identical replacement parts.

Register Online

Thank you for your purchase. Register your product now for:

• WARRANTY SERVICE: Registering your product will help you obtain more efficient warranty service in case there is a problem with your product.
• CONFIRMATION OF OWNERSHIP: In case of an insurance loss, such as fire, flood or theft, your registration of ownership will serve as your proof of purchase.
• FOR YOUR SAFETY: Registering your product will allow us to contact you in the unlikely event a safety notification is required under the Federal Consumer Safety Act.
• Register online at www.BlackandDecker.com/NewOwner

TWO-YEAR LIMITED WARRANTY

Black & Decker (U.S.) Inc. warranties this product to be free from defects in material or workmanship for a period of two (2) years following the date of purchase, provided that the product is used in a home environment. This limited warranty does not cover failures due to abuse, accidental damage or when repairs have been made or attempted by anyone other than BLACK+DECKER and its Authorized Service Centers. A defective product meeting the warranty conditions set forth herein will be replaced or repaired at no charge in either of two ways:

The first, which will result in exchanges only, is to return the product to the retailer from whom it was purchased (provided that the store is a participating retailer). Returns should be made within the time period of the retailer's policy for exchanges. Proof of purchase may be required. Please check with the retailer for its specific return policy regarding time limits for returns or exchanges. The second option is to take or send the product (prepaid) to a BLACK+DECKER owned or authorized Service Center for repair or replacement at BLACK+DECKER's option. Proof of purchase may be required. BLACK+DECKER owned and authorized service centers are listed online at www.blackanddecker.com. This warranty does not apply to accessories. This warranty gives you specific legal rights and you may have other rights which vary from state to state or province to province. Should you have any questions, contact the manager of your nearest BLACK+DECKER Service Center. This product is not intended for commercial use, and accordingly, such commercial use of this product will void this warranty. All other guarantees, express or implied, are hereby disclaimed.

IATin AMERiCA: This warranty does not apply to products sold in Latin America. For products sold in Latin America, check country specific warranty information contained in the packaging, call the local company or see the website for such information.

Imported by Black & Decker (U.S.) Inc.,

701 E. Joppa Rd.

Towson, MD 21286

BlackandDecker.com

(1-800-544-6986)

FRAnÇAis

fabrication classe II (double isolation)

Importé par.Black & Decker (U.S.) Inc.,

701 E. Joppa Rd.

Towson, MD 21286

BlackandDecker.com

(1-800-544-6986)

Eje Central Lázaro Cárdenas No. 18 - Local (55) 5588 9377 D, Col. Obrera

MERIDA, YUC

Calle 63 #459-A - Col. Centro [phone]

MONTERREY, N.L.

Av. Francisco I. Madero 831 Poniente - Col. (818) 375 23 13 Centro

PUEBLA, PUE

17 Norte #205 - Col. Centro [phone]

QUERETARO, QRO

Av. San Roque 274 - Col. San Gregorio (442) 2 17 63 14

SAN LUIS POTOSI, SLP

Imported by. Black & Decker (U.S.) Inc.,

701 E. Joppa Rd.

Towson, MD 21286

BlackandDecker.com

(1-800-544-6986)