304571 - Alarm Clock Bearware - Free user manual and instructions

Product Type	Clock radio
Brand	Bearware
Model	304571
Power supply	1 AAA battery 1.5 V
Display	Analog with hands (hours, minutes, seconds, alarm hand)
Alarm function	Yes, with independent adjustment
Snooze function	Yes, snooze duration approx. 5 minutes, repetition up to 45 minutes
Dial illumination	Yes, activated by the Snooze/Light button
Time setting	Knob on the back of the device
Alarm setting	Knob on the back of the device
Alarm switch	ON/OFF on the back of the device
Battery compartment	On the back, for 1 AAA battery
Package contents	Clock, instruction manual
Intended use	Private use, not suitable for medical purposes
Moisture protection	Not waterproof, avoid moisture and direct sunlight
Operating temperature	Ambient temperature, avoid sudden changes
Disposal	Compliant with WEEE directive, do not dispose with household waste
WEEE registration number	DE 67896761

Frequently Asked Questions - 304571 Bearware

How to set the time on the Bearware 304571 clock radio?

Turn the Time setting knob on the back of the device until the desired time is displayed on the dial.

How to set the alarm?

Turn the Alarm time setting knob on the back of the device until the desired alarm time is displayed. The alarm hand on the front indicates the set alarm.

How to activate or deactivate the alarm?

Use the Alarm ON/OFF switch on the back of the device. Position ON to activate, OFF to deactivate.

How to use the snooze function?

Press the Snooze/Light button when the alarm sounds. The alarm is suspended for approximately 5 minutes and then triggers again. This function works up to a maximum of 45 minutes.

How to turn on the dial illumination?

Press the Snooze/Light button to turn the dial backlight on or off.

What battery to use for the Bearware 304571 clock?

Use a 1.5 V AAA battery. Insert it into the battery compartment on the back, observing polarity.

What to do if the alarm does not ring?

Check that the Alarm ON/OFF switch is set to ON, that the alarm time is correctly set, and that the battery is functional. Replace the battery if necessary.

Is the clock suitable for use in the bathroom?

No, the clock is not waterproof. It should only be used in a dry place to avoid damage.

How to clean and maintain the clock?

Clean the device with a soft, dry cloth. Do not use chemical or abrasive cleaners. Protect it from moisture and direct sunlight.

What to do in case of malfunction?

First check the battery and settings. Consult the instruction manual for instructions. If the problem persists, contact customer service.

USER MANUAL 304571 Bearware

BEARWARE

Thank you for choosing a BEARWARE product. Please read the following user manual carefully so that you can enjoy the purchased product for a long time.

1. Scope of delivery

• Alarm clock
• User manual

2. Technical data

Power supply 1x 1.5 AA	battery
Features	Seconds displaySnooze functionLight

3. Additional information about this alarm clock

Before using, make sure that the device is not damaged. If this is the case, then do not use it. The alarm clock should not be exposed to moisture or direct sunlight. The product is intended only for private use and not for medical purposes or for public information.

Caution!

Keep the batteries and the device out of the reach of children. Batteries contain harmful acids. Weak batteries should be replaced as soon as possible to prevent leakage! Never use new and old batteries or batteries of different types together. Never throw batteries into a fire and do not short-circuit them. Do not recharge the batteries and please do not take them apart. There is a risk of explosion!

1. Product details
   

5. Initial use

Take the product out of the package and remove all the packaging material. Open the battery compartment at the back of the device and insert one 1.5 V AA battery. Pay attention to the correct polarity of the contacts.

6. Setting the time

To set the time, turn the "Time Setting" potentiometer at the back of the device, until the desired time is displayed on the alarm clock.

7. Alarm setting

7.1 Setting the alarm

To set the alarm, turn the "Alarm time setting" potentiometer at the back of the device, until the desired alarm time is shown on the alarm clock. The alarm indicator on the front shows the currently set alarm.

7.2 Enabling/disabling the alarm

To enable or disable the alarm, move the "Alarm ON / OFF" switch to ON (switched on) or OFF (switched off) position.

7.3 Snoozing the alarm

Press the "Snooze/Light" button to snooze an alarm. The alarm is now turned off for the snooze duration of about 5 minutes and then goes off again. This process only works up to a maximum of 45 minutes.

8. Light

Press the "Snooze/Light" button to turn the back light on or off.

9. Safety instructions and disclaimer

Never try to open the device to repair or make modifications. Avoid contact with the mains voltage. Do not short-circuit the product. The device is not waterproof, hence please use it only in dry surroundings. Protect it from high humidity, water and snow. Keep the device away from high temperatures. Do not expose the de-

vice to sudden changes in temperature or strong vibrations, as this could damage the electronic components. Check the device for any damage before using it. The device should not be used if it was subject to impact or has been damaged in some other manner. Please comply with the local regulations and restrictions.

Do not use the device for purposes other than those described in the user manual. This product is not a toy. Keep it out of the reach of children or mentally disabled persons. Any repair or modification to the device, which is not carried out by the original supplier, will void any warranty and guarantee claims. The device should only be used by those who have read and understood this user manual. The specifications of the device may be changed without any special prior notification.

10. Disposal instructions

In line with the European WEEE directive, electrical and electronic devices should not be disposed of along with domestic waste. Their components must be sent for recycling or disposal separately, as improper disposal of toxic and dangerous components could permanently damage the environment. According to the electrical and electronic equipment act (ElektroG), you are obliged (as a consumer) to return (free of charge) electrical and electronic devices to the manufacturer, the point of sale or public collection points at the end of their service life. The relevant local laws regulate the details in this regard. The symbol displayed on the product, in the user manual or/and on the packaging refers to these regulations.

With this manner of sorting, recycling and disposal of used devices, you make an important contribution towards protecting our environment.

11. Instructions for battery disposal

In conjunction with the sale of batteries along with the supply of devices that include batteries, the supplier is obliged to point out the following to the customer: The customer is legally obliged to return used batteries. He can return used batteries which the supplier offers or has offered as new batteries in his assortment free of charge to the supplier's dispatch warehouse (shipping address). The symbols shown on the batteries indicate the following: Pb = battery contains more than 0.004 percent lead by weight, Cd = battery contains more than 0.002 percent cadmium by weight, Hg = battery contains more than 0.0005 percent mercury by weight.

The symbol of the crossed-out dustbin means that the battery should not be disposed of in household waste.

WEEE directive 2012/19/EU WEEE Register no.: DE 67896761

WD Plus GmbH hereby certifies that the devices 304570/20200514FS013 and 304571/20200514FS013 comply with the fundamental requirements and all other relevant stipulations. A complete conformity statement can be obtained from: WD Plus GmbH, Wohlenbergstraße 16, 30179 Hannover