NEX-FS100NK - Video camera SONY - Free user manual and instructions

USER MANUAL NEX-FS100NK SONY

Interchangeable Lens Digital HD Video Camera Recorder

F McAermωeアアド Gレーニの知らせ	JP
Firmware update GB
Mise à jour du micrologiciel	FR
Firmware-Update DE
Actualización de firmware	ES
Aggiornamento del firmware	IT
固件更新	CS

日本語

60i/50i SEL(60i/50i切换)

[60i]	[50i]
1080/60p PS	1080/50p PS
1080/60i FX	1080/50i FX
1080/60i FH	1080/50i FH
1080/60i HQ	1080/50i HQ

[60i]	[50i]
1080/60i LP	1080/50i LP
1080/30p FX	1080/25p FX
1080/30p FH	1080/25p FH
1080/24p FX	-
1080/24p FH	-
720/60p FX	720/50p FX
720/60p FH	720/50p FH

シャットーニスビートの設定值

	[60i]	[50i]
FRAME
RATE	1, 2, 4, 8, 15,	1, 2, 3, 6, 12,
(单位:	30, 60	25, 50
fps)
REC	1080/60p PS,
	1080/30p FX,	1080/50p PS,
	1080/30p FH,	1080/25p FX,
	1080/24p FX,	1080/25p FH
	1080/24p FH

[60i]選択時

1080p/480i, 720p/480i, 1080i/480i, 480p, 480i

[50i]選択時

HDMI/COMPONENT

1080p/576i, 720p/576i, 1080i/576i, 576p, 576i

マウトアダフターLA-EA2対応機能

New functions have been added to your camcorder by the firmware update. The new functions and their respective operations are described here.

Please refer to the Operating Guide of your camcorder.

60i or 50i selectable

60i/50i SEL

[60i/50i SEL] has been added to the [OTHERS] menu and allows you to select the TV color system of the area where you are using your camcorder.

[60i] (default setting*)	To use the camcorder as an NTSC system
[50i] (default setting**)	To use the camcorder as a PAL system

• NEX-FS100U/FS100N/FS100UK/FS100NK
  ** NEX-FS100E/FS100P/FS100EK/FS100PK
• When you change the setting, the camcorder will turn off and then on again automatically.
• When any recording media is formatted or recorded with the [60i] setting, you cannot record on or play from that media with the PAL system. When any recording media is formatted or recorded with the [50i] setting, you cannot record on or play from that media with the NTSC system. If the [A movie with a different video signal format from this device has been recorded. Movie recording disabled.] message appears when you switch the setting between [60i] and [50i], use another recording medium or select [MEDIA FORMAT].
• If you select [MEDIA FORMAT], the protected movies are also deleted.
• When you select [50i], [TC FORMAT] is set to [NDF] automatically.

Differences incurred by changing the setting of [60i/50i SEL]

Changing the setting of [60i/50i SEL] influences the settings and recording results as follows.

Recording format with high definition image quality (HD)

[60i] [50i]

1080/60p PS 1080/50p PS

1080/60i FX 1080/50i FX

1080/60i FH 1080/50i FH

1080/60i HQ 1080/50i HQ

1080/60i LP 1080/50i LP

1080/30p FX 1080/25p FX

1080/30p FH 1080/25p FH

1080/24p FX -

1080/24p FH -

720/60p FX 720/50p FX

720/60p FH 720/50p FH

Shutter speed

The shutter speed level remains the same, however, the shutter speed at each level changes as follows.

Level	60i/60p/30p	24p	50i/50p/25p
0	-	3	-
1	4	6	3
2812	6
3	15		24
4	30		40
5	60		48
6	90		50
7	10060	100
8	12596	120
9	180	100	150
10	250	120	215
11	350	144	300
12 500	192 425
13 725	200 600
14 1000	288 1000
15 1500	400 1250
16 2000	576 1750
17 3000	1200 2500
18 4000	2400 3500
19 6000	4800 6000
20 10000	10000 10000

Slow & Quick Motion recording

	[60i] [50i]
FRAME	1, 2, 4, 8, 15,	1, 2, 3, 6, 12,
RATE	30, 60	25, 50
(unit: fps)
REC	1080/60p PS,	1080/50p PS,
FORMAT	1080/30p FX,	1080/25p FX,
	1080/30p FH,	1080/25p FH
	1080/24p FX,
	1080/24p FH

Playback speed of the movies recorded with Slow & Quick Motion function When [60i] is selected

FRAME RATE	REC FORMAT
	24p 30p 60p
60 40% Slow 50% Slow 100%
			(Standard)
30 80% Slow 100%		200%
		(Standard)	Quick
15 160%	Quick	200%	400%
		Quick	Quick
8 300%	Quick	375%	750%
		Quick	Quick
4 600%	Quick	750%	1500%
		Quick	Quick
2 1200%	Quick	1500%	3000%
		Quick	Quick

FRAME RATE	REC FORMAT
	24p 30p 60p
1 2400%	Quick	3000%	6000%
		Quick	Quick

When [50i] is selected

FRAME RATE	REC FORMAT
	25p 50p
50 50% Slow 100%		(Standard)
25 100%		200% Quick
(Standard)
12 208% Quick	417% Quick
6	417% Quick	833% Quick
3	833% Quick	1667% Quick
2	1250% Quick	2500% Quick
1	2500% Quick	5000% Quick

Approximate payback stream length of Slow & Quick Motion recording When [60i] is selected

Unit: h (hour) min (minute)

FRAME RATE	REC FORMAT
	24p 30p 60p
60	13 h	13 h	13 h
30	13 h	13 h	6 h 30 min
15	8 h 6 min	6 h 30 min	3 h 18 min
8	4 h 6 min	3 h 18 min	1 h 36 min
4	2 h	1 h 36 min	48 min
2	1 h 6 min	54 min	24 min
1	30 min	24 min	12 min

When [50i] is selected

Unit: h (hour) min (minute)
FRAME RATE	REC FORMAT
	25p 50p
50 13 h 13 h
25 13 h 6 h 30 min
12	6 h 30 min	3 h 18 min
FRAME RATE	REC FORMAT
	25p	50p
6 3 h 18 min 1 h 36 min
3 1 h 36 min 48 min
2 1 h 6 min 30 min
1 30 min 18 min

Approximate recording operation time of Slow & Quick Motion recording

When [60i] is selected

Unit: h (hour) min (minute)

FRAME RATE	REC FORMAT
	24p 30p 60p
60	5 h 12 min	6 h 30 min	13 h
30 10 h	13 h 13 h
	24 min
15 13 h	13 h 13 h
8	13 h	13 h	13 h
4	13 h	13 h	13 h
2	13 h	13 h	13 h
1	13 h	13 h	13 h

When [50i] is selected

Unit: h (hour) min (minute)

FRAME RATE	REC FORMAT
	25p	50p
50	6 h 30 min 13 h
25	13 h	13 h
12	13 h	13 h
6 13 h	13 h
3 13 h	13 h
2 13 h	13 h
1 13 h	13 h

Time code setting values

When [60i] is selected

You can set the time code between 00:00:00:00 and 23:59:59:29.

• At 24p, the time code must be set in multiples of 4 between 00:00:00:00 and 23:59:59:23.

When [50i] is selected

You can set the time code between 00:00:00.00 and 23:59:59.24.

[VIDEO OUT] setting items

When [60i] is selected

■HDMI/COMPONENT

1080p/480i, 720p/480i, 1080i/480i, 480p, 480i

When [50i] is selected

HDMI/COMPONENT

1080p/576i, 720p/576i, 1080i/576i, 576p, 576i

TC FORMAT (NEX-FS100E/ FS100P/FS100EK/FS100PK)

[TC FORMAT] has been added to [TC/UB SET] and allows you to select the frame mode for [60i].

[DF] (default setting)	Sets the frame mode to the drop frame mode.
[NDF]	Sets the frame mode to the non-drop frame mode.

• [TC FORMAT] is set to [NDF] automatically, when 24p is selected with [FORMAT], or [50i] is selected with [60i/50i SEL].

What is drop frame?

Although 30 frames are considered as 1 second in time code processing, the actual frame frequency of an NTSC image signal is 29.97 frames/sec. As a result, the time code gradually lags behind real time as the recording gets longer. The drop frame function adjusts the time code to real time. In the drop frame process, the first 2 frames of each second are not recorded except in every tenth minute. Recording without the drop frame process is called non-drop frame recording.

Compatibility with the LA-EA2 Mount Adaptor

Using an A-mount lens with the LA-EA2 Mount Adaptor (sold separately), you can take advantage of the phase-detection AF feature to shoot images. The available functions differ depending on the lens.

Functions

Autofocus Available

AF system Phase-detection AF

Switching to autofocus SAM: switchable on the lens SSM: must be switched on the lens and with the FOCUS switch of the camcorder Other lenses: switchable with the FOCUS switch of the camcorder

• For details, refer to the operating instructions supplied with the Mount Adaptor.
• You may not be able to use the LA-EA2 Mount Adaptor with certain lenses. You may not use autofocusing with certain lenses attached via the Mount Adaptor. Consult your Sony dealer or local authorized Sony service facility for advice on compatible lenses.
• Aperture is set to F3.5 when you record movies with autofocusing. When you are using a lens with an F3.5 or smaller F-stop, aperture is set to the maximum F-stop of the lens. When you want to set your own value for aperture, select manual focusing. Adjusting the aperture during recording may cause the noise or turn the screen brighter.
• The noise of the camcorder and lens in the autofocusing operation may be recorded. You can eliminate the noise by setting the AUTO/MANUAL switch to MANUAL, and then the AUDIO LEVEL dial to 0 before recording.
• It may take a long time or may be difficult for the camcorder to focus, depending on the lens used or the subject.

AF MICROADJUSTMENT

[AF MICROADJUSTMENT] has been added to the [CAMERA SET] menu. This allows you to adjust and register an autofocused position for each lens, when using an A-mount lens with the LA-EA2 Mount Adaptor (sold separately).

[ON/OFF] Sets whether or not to use the [AF MICRO ADJUSTMENT] function. Select [ON] to use it. (The default setting is [OFF].)

[AMOUNT] Allows you to select an optimum value between -20 and +20. Selecting a larger value shifts the autofocused position away from the camcorder. Selecting a smaller value shifts the autofocused position closer to the camcorder.

[CLEAR ALL] Clears the value you set.

• It is recommended that you adjust the position under actual shooting conditions.
• When you attach a lens for which you have already registered a value, the registered value appears on the screen. [± 0] appears for lens for which a value has yet to be registered.
• When 30 lenses have been registered, [AMOUNT] turns gray and you cannot select this time. If you want to register another lens, you must first clear a value. Attach a lens of the value to be cleared and select [± 0] . If you want to clear all registered values, select [CLEAR ALL].
• Use [AF MICRO ADJUSTMENT] with Sony, Minolta, and Konika-Minolta lenses only. If you use [AF MICRO ADJUSTMENT] with other brands of lenses, the registered value may be affected.
• You cannot set [AF MICRO ADJUSTMENT] individually for a Sony, Minolta, and Konika-Minolta lens of the same specification.

Compatibility with the LA-EA2 Mount Adaptor (Continued)

VERSION DISPLAY

[VERSION DISPLAY] has been added to the [OTHERS] menu and allows you to display the version of your camcorder, and the lens and Mount Adaptor attached.

• To check the version of the lens or Mount Adaptor, first set the camcorder to the recording mode and then select [VERSION DISPLAY].

AF area display

When using an A-mount lens with the LA-EA2 Mount Adaptor (sold separately), the camcorder displays in-focus frames. The frame of the area that is in focus turns green.

Manual focusingAutofocusing

Other functions added

GAIN/ISO SEL

[GAIN/ISO SEL] has been added to the [CAMERA SET] menu and allows you to handle gain in ISO sensitivity.

[GAIN]

Handles gain in dB.

(default setting)

[ISO] Handles gain in ISO sensitivity (recommended exposure index). The

gain value displayed in ISO sensitivity takes effect, instead of dB.

• Set the AUTO/MANUAL switch to MANUAL to set this item.

• Selecting [ISO] makes the following changes.

• Cancels the [GAIN SET] setting, and activates the [ISO SET] setting

• Cancels the [AGC LIMIT] setting, and activates the [AUTO ISO LIMIT] setting

ISO SET

[ISO SET] has been added to the [CAMERA SET] menu and allows you to set ISO values for H, M, and L positions of the GAIN switch by 1/3EV.

• The default settings are [H] ISO3200, [M] ISO1600, and [L] ISO500.

• The value you can select depends on the [GAMMA] setting of PICTURE PROFILE as follows.

• STANDARD: from ISO500 to ISO16000

• [CINEMATONE1]: from ISO500 to ISO16000
• [CINEMATONE2]: from ISO400 to ISO12800

• [ITU709]: from ISO500 to ISO16000

• You can set this item when [ISO] is selected in [GAIN/ISO SEL].

• You can set this item independently from the value you set with [GAIN SET].

AUTO ISO LIMIT

[AUTO ISO LIMIT] has been added to the [CAMERA SET] menu and allows you to set the highest value to be selected for auto ISO by 1/3EV.

• The value you can select depends on the [GAMMA] setting of PICTURE PROFILE as follows.
• STANDARD: from ISO500 to ISO12800
• [CINEMATONE1]: from ISO500 to ISO12800
• [CINEMATONE2]: from ISO400 to ISO10000

• [ITU709]: from ISO500 to ISO12800

• You can set this item when [ISO] is selected in [GAIN/ISO SEL].

• You can set this item independently from the value you set with [AGC LIMIT].

MARKER

Three aspect ratios [1.66:1]/[1.85:1]/[2.35:1] have been added. To select an aspect ratio, select the [DISPLAY SET] menu [MARKER] [ASPECT].

EXPANDED FOCUS MAG

[EXPANDED FOCUS MAG] has been added to the [DISPLAY SET] menu and allows you to set the magnification rate for expanded focus. Also, you can move the position to be focused on with the / / / / EXEC buttons.

[× 4.0] Displays at 4 times.

[× 8.0] Displays at 8 times.

[× 4.0 / × 8.0]

(default setting)

Each time you press the EXPANDED FOCUS button, the magnification rate changes in the order of 4 times 8 times OFF (original size).

FOCUS DISPLAY

[FOCUS DISPLAY] has been added to the [DISPLAY SET] menu and allows you to set the unit of focal distance to be displayed.

[METER]

Displays the focal distance in meters.

(default setting)

[FEET] Displays the focal distance in feet.

SHUTTER DISPLAY

[SHUTTER DISPLAY] has been added to the [DISPLAY SET] menu and allows you to set the unit of shutter speed to be displayed.

[SECOND]

Displays the shutter speed in seconds.

(default setting)

[DEGREE] Displays the shutter speed in degrees. The shutter speed equal to the period that your camcorder reads image data from the image sensor is defined as 360 degrees.

• 1/60 second is defined as 360 degrees when a frame rate of 60 is selected with [REC FORMAT].
• 1/30 second is defined as 360 degrees when a frame rate of 30 is selected with [REC FORMAT].
• 1/24 second is defined as 360 degrees when a frame rate of 24 is selected with [REC FORMAT].
• 1/50 second is defined as 360 degrees when a frame rate of 50 is selected with [REC FORMAT].

• 1/25 second is defined as 360 degrees when a frame rate of 25 is selected with [REC FORMAT].

• When you press the DATA CODE button, the shutter speed is displayed in seconds, regardless of this setting.

• Shutter speed slower than 360^ are displayed in multiples of 360^ , such as 360^ × 2 .

CAMERA PROFILE

[CAMERA PROFILE] has been added to the [OTHERS] menu. [CAMERA PROFILE] allows you to save up to 99 profiles, as file numbers 01 to 99. Each profile can contain settings for the menu, PICTURE PROFILE, buttons, etc. The camera profiles are stored on a memory card.

[LOAD] Selects and loads the camera profile from the memory card.

[SAVE] Saves or rewrites the camera profile on the memory card.

[DELETE] deletes the camera profile on the memory card.

• There is no compatibility between the camera profiles set in different settings of [60i/50i SEL], and those of different versions of camcorder. You can check the version of your camcorder with [VERSION DISPLAY] in the [OTHERS] menu.
• You may not be able to see a particular file, if you change the file name on a computer or turn off the camcorder while the camera profile is being saved or deleted.
• You cannot load a camera profile saved with a different model or edited on a computer.
• You cannot edit a camera profile of your camcorder saved on a memory card on a computer.
• If you format a memory card, the camera profiles saved in it are also deleted.

Zebra/Peaking output

You can output zebra and peaking information from the HDMI, COMPONENT, and VIDEO OUT jacks. Select the [DISPLAY SET] menu [DISPLAY OUTPUT] [ALL OUTPUT].

Français

[60i] [50i]

1080/60p PS 1080/50p PS

1080/60i FX 1080/50i FX

1080/60i FH 1080/50i FH

1080/60i HQ 1080/50i HQ

1080/60i LP 1080/50i LP

1080/30p FX 1080/25p FX

1080/30p FH 1080/25p FH

1080/24p FX -

1080/24p FH -

720/60p FX 720/50p FX

720/60p FH 720/50p FH

1080p/480i, 720p/480i, 1080i/480i, 480p, 480i

1080p/576i, 720p/576i, 1080i/576i, 576p, 576i

TC FORMAT (NEX-FS100E/ FS100P/FS100EK/FS100PK)

Autofocus manuelAutofocus

[60i] [50i]

1080/60p PS 1080/50p PS

1080/60i FX 1080/50i FX

1080/60i FH 1080/50i FH

1080/60i HQ 1080/50i HQ

1080/60i LP 1080/50i LP

1080/30p FX 1080/25p FX

1080/30p FH 1080/25p FH

1080/24p FX -

1080/24p FH -

720/60p FX 720/50p FX

720/60p FH 720/50p FH

Verschlusszeit

	[60i] [50i]
BILD-FREQUENZ(Einheit: fps)	1, 2, 4, 8, 15,30, 60	1, 2, 3, 6, 12,25, 50
AUFN.FORMAT	1080/60p PS,1080/30p FX,1080/30p FH,1080/24p FX,1080/24p FH	1080/50p PS,1080/25p FX,1080/25p FH

1080p/480i, 720p/480i, 1080i/480i, 480p, 480i

1080p/576i, 720p/576i, 1080i/576i, 576p, 576i

TC FORMAT (NEX-FS100E/ FS100P/FS100EK/FS100PK)

[60i] [50i]

1080/60p PS 1080/50p PS

1080/60i FX 1080/50i FX

1080/60i FH 1080/50i FH

1080/60i HQ 1080/50i HQ

1080/60i LP 1080/50i LP

1080/30p FX 1080/25p FX

1080/30p FH 1080/25p FH

1080/24p FX -

1080/24p FH -

720/60p FX 720/50p FX

720/60p FH 720/50p FH

	[60i] [50i]
IMÁGENES P. SECUNDO (unidad: fps)	1, 2, 4, 8, 15, 30, 60	1, 2, 3, 6, 12, 25, 50
FORM. GRAB.	1080/60p PS, 1080/30p FX, 1080/30p FH, 1080/24p FX, 1080/24p FH	1080/50p PS, 1080/25p FX, 1080/25p FH

1080p/480i, 720p/480i, 1080i/480i, 480p, 480i

1080p/576i, 720p/576i, 1080i/576i, 576p, 576i

TC FORMAT (NEX-FS100E/ FS100P/FS100EK/FS100PK)

[60i] [50i]

1080/60p PS 1080/50p PS

1080/60i FX 1080/50i FX

1080/60i FH 1080/50i FH

1080/60i HQ 1080/50i HQ

1080/60i LP 1080/50i LP

1080/30p FX 1080/25p FX

1080/30p FH 1080/25p FH

1080/24p FX -

1080/24p FH -

720/60p FX 720/50p FX

720/60p FH 720/50p FH

	[60i] [50i]
FREQUENZA DIQUADRO(unità: fps)	1, 2, 4, 8, 15,30, 60	1, 2, 3, 6, 12,25, 50
FORMATO REG.	1080/60p PS,1080/30p FX,1080/30p FH,1080/24p FX,1080/24p FH	1080/50p PS,1080/25p FX,1080/25p FH

1080p/480i, 720p/480i, 1080i/480i, 480p, 480i

1080p/576i, 720p/576i, 1080i/576i, 576p, 576i

TC FORMAT (NEX-FS100E/ FS100P/FS100EK/FS100PK)

INGR. M. FUOCO ALLARG.

[60i]	[50i]
1080/60p	PS 1080/50p	PS
1080/60i	FX 1080/50i	FX
1080/60i	FH 1080/50i	FH
1080/60i	HQ 1080/50i	HQ

[60i]	[50i]
1080/60i	LP 1080/50i LP
1080/30p	FX 1080/25p FX
1080/30p	FH 1080/25p FH
1080/24p	FX -
1080/24p	FH -
720/60p	FX 720/50p FX
720/60p	FH 720/50p FH

快门速度

	[60i]	[50i]
帧速率 (单位: fps)	1, 2, 4, 8,	1, 2, 3, 6,
	15, 30, 60	12, 25, 50
拍摄格式	1080/60p PS,	1080/50p PS,
	1080/30p FX,	1080/25p FX,
	1080/30p FII,	1080/25p FII
	1080/24p FX,
	1080/24p FH

1080p/480i、720p/480i、1080i/480i、480p、480i

选择 [50i] 时

HDMI/COMPONENT

1080p/576i、720p/576i、1080i/576i、576p、576i

TC FORMAT (NEX-FS100E/ FS100P/FS100EK/FS100PK)