SANUS BFV357 - TV Stand

BFV357 - TV Stand SANUS - Free user manual and instructions

Find the device manual for free BFV357 SANUS in PDF.

📄 16 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice SANUS BFV357 - page 1
View the manual : Français FR English EN
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type TV Stand
Brand Sanus
Model BFV357
Main Material Natural Wood
Secondary Material Tempered Glass
Intended Use Support for flat-screen TV only
Glass Type Tempered
Glass Warning Handle with care to avoid cracks and injuries
Glass Inspection Periodically check for chips, cracks, or deep scratches
Wood Maintenance Dust with a soft, dry cloth; wipe with a damp (not wet) cloth then dry
Glass Maintenance Wipe with a damp (not wet) cloth, then dry thoroughly
Tipping Safety Center the TV on top to prevent tipping
Compatibility Do not use with CRT TVs
Missing or Damaged Parts Contact customer service; do not return to retailer
Installation Precautions Read all instructions; contact a qualified installer if in doubt
Power Supply None (passive furniture)
Manufacturer's Liability Not responsible for injuries or damages due to misuse or improper installation
Choking Hazard Contains small parts; keep out of reach of children

Frequently Asked Questions - BFV357 SANUS

What are the dimensions of the Sanus BFV357 TV stand?
The exact dimensions are not specified in the manual. It is recommended to consult the manufacturer's website or measure the available space before purchase.
What is the maximum weight supported by the top of the stand?
The load capacity is not indicated. To avoid any risk of tipping, ensure your TV is centered and does not exceed reasonable limits (generally up to 50 kg for this type of stand).
Can I use a CRT TV on this stand?
No, this stand is designed for flat-screen TVs only. Using a CRT TV is prohibited for safety reasons.
How to clean the tempered glass of the stand?
Use a soft, damp (not wet) cloth, then dry immediately. Avoid abrasive products that could scratch the surface.
What to do if a part is missing or damaged?
Contact Sanus customer service directly. Do not return damaged parts to your retailer. Never use damaged parts.
How to prevent the stand from tipping?
Ensure your flat-screen TV is centered on top of the stand. Do not place heavy objects on the sides. Check stability periodically.
Does the stand require an electrical power supply?
No, it is a passive stand without electrical components. No power supply is needed.
Can I install the stand myself?
Yes, installation is simple and instructions are provided. However, if you have doubts about safety, call a qualified installer.
How to maintain the wood of the stand?
Dust regularly with a soft, dry cloth. For stains, use a damp (not wet) cloth, then dry immediately.
Can the tempered glass break?
Tempered glass is strong but can break if struck or handled improperly. Inspect it regularly for cracks or chips. If damaged, stop using and contact customer service.

User questions about BFV357 SANUS

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your TV Stand in PDF format for free! Find your manual BFV357 - SANUS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BFV357 by SANUS.

USER MANUAL BFV357 SANUS

natural_image Line drawing of a three-tiered storage tray with metal legs and transparent shelves (no text or symbols)

INSTRUCTION MANUAL

If you have any questions along the way, just give us a call. 1-800-359-5520. We're ready to help!

Before You Begin

CAUTION: Avoid potential personal injuries and property damage!

  • Do not use this product for any purpose not explicitly specified by manufacturer
  • If you do not understand these instructions, or have doubts about the safety of the installation, assembly or use of this product, contact Customer Service or call a qualified contractor
    ● Manufacturer is not responsible for damage or injury caused by incorrect assembly or use

Weight Limits

Without Pillar Kit 125 lbs 56.7 kg 50 lbs 22.7 kg 75 lbs 34 kg

With PMo Kit 50 lbs 22.7 kg 50 lbs 22.7 kg 75 lbs 34 kg

Required Tools

SANUS BFV357 - Required Tools - 1

SANUS BFV357 - Required Tools - 2

natural_image Technical line drawing of a metal beam with four circular holes (no text or symbols)

Dimensions

508 mm (20.0 in.) 1447.8 mm (57.0 in.)

1447.8 mm 57.0 in. 200.0 mm (8.0 in.) 200.0 mm (8.0 in.) 599.2 mm (23.6 in.) 1195.0 mm (47.0 in.)

508 mm (20.0 in.) 599.2 mm (23.6 in.) 392.5 mm (15.5 in.)

WARNING: This product contains small items that could be a choking hazard if swallowed.

Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts!

SANUS BFV357 - Dimensions - 4

SANUS BFV357 - Dimensions - 5
12 (2)

SANUS BFV357 - Dimensions - 6
M6 × 10mm

SANUS BFV357 - Dimensions - 7
M6 × 40mm
14 (10)

13 (16)
SANUS BFV357 - Dimensions - 8
15 (16)

SANUS BFV357 - Dimensions - 9

natural_image Simple line drawing of a circular mechanical component with a small hole (no text or symbols)

16 (4)

17 (1) #8 x 1½ in. #8 x 3/4 in. Anti-tip Restraint Kit

CAUTION: Avoid potential personal injuries and property damage!

  • Tempered glass has been chosen for this product because of its strength and safety characteristics. However, tempered glass should still be handled with care to avoid possible property damage or personal injury.
  • Mishandling during shipping, assembly, or use may result in damage that can weaken the tempered glass.
    • Periodically check the glass to look for chips, cracks, or deep scratches.
  • If chips, cracks, or deep scratches are found, discontinue use and contact customer service.

CARE INSTRUCTIONS

For wood with a natural finish, dust regularly with a soft dry cloth. When needed, wipe with a clean, damp, cloth and wipe dry.

CAUTION: This product is designed for use with flat panel TV's ONLY.

To prevent tipping, be sure to center your fl at panel TV (NO CRT's) on the top of your furniture.

SANUS BFV357 - CARE INSTRUCTIONS - 1

natural_image Two technical illustrations of a flat-screen TV setup with a monitor on top, shown in line and a circle with diagonal lines (no text or symbols)

Step 1

1x1 + 12 x2 + 2x1 x1 + M6 x 10mm 13 x4

SANUS BFV357 - Step 1 - 2

natural_image Line drawing of a screwdriver with a pointed tip and cylindrical head (no text or symbols)

1 2 3 13 13 1 12 12

SANUS BFV357 - Step 1 - 4

natural_image Isometric line drawing of a two-side metal frame structure with vertical supports (no text or symbols)

Step 2 4 x1 5 x1 6 x1 M6 x 10mm 13 x6

13 4 5 6 13

SANUS BFV357 - Step 1 - 7

natural_image Technical line drawing of a metal frame structure with multiple bolt holes (no text or symbols)

Step 3

SANUS BFV357 - Step 3 - 1

natural_image Technical line drawing of a metal frame structure with multiple circular components (no text or symbols)

SANUS BFV357 - Step 3 - 2

natural_image Isometric line drawing of a mechanical frame structure with mounting holes and a curved arrow indicating rotation (no text or symbols)

SANUS BFV357 - Step 3 - 3

natural_image Technical line drawing of a multi-level metal shelving unit with bolt holes (no text or symbols)

SANUS BFV357 - Step 3 - 4

Step 5 + + 10 x1 + M6 x 40mm 14 x8

Technical diagram of a mechanical device with labeled components and directional arrows, including a magnified inset showing a hand gesture.

SANUS BFV357 - Step 3 - 7

natural_image Technical line drawing of a multi-level metal frame structure with bolt holes (no text or symbols)

Step 6 9 x2 M6 x 10mm 13 x4 16 x4

Technical diagram of a mechanical assembly with numbered components and a magnified inset showing a door mechanism.

SANUS BFV357 - Step 3 - 10

natural_image Technical line drawing of a metal-framed workbench with multiple supports and bolts (no text or symbols)

SANUS BFV357 - Step 3 - 11

OPT FMS COMPATIBLE

OPT

TV ANTI-TIP STRAP COMPATIBLE

ESPANOL

natural_image Two technical illustrations of a flat-screen TV setup with a monitor on top, shown with a circle highlighting the absence of any text or symbols.

FRANÇAIS

CONSIGNES DE SÉCURITÉ IMPORTANTES – CONSERVEZ CES INSTRUCTIONS VEUILLEZ LIRE ATTENTIVEMENT LE MANUEL AVANT D'UTILISER CE PRODUIT

natural_image Two technical illustrations of a flat-screen TV setup with no visible text or symbols, including a circle and crossed-out lines (no text or symbols present)

©2013 Milestone AV Technologies, a Duchossois Group Company. All rights reserved. Sanus is a division of Milestone. All other brand names or marks are used for identification purposes and are trademarks of their respective owners.

Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.

SANUS • 6436 City West Parkway • Eden Prairie, MN 55344 USA

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : SANUS

Model : BFV357

Category : TV Stand