FS5100 - Power bank Xtorm - Free user manual and instructions

Product Type	Portable Battery (Power Bank)
Brand	Xtorm
Model	FS5100
Capacity	Approximately 10000 mAh (estimate)
Battery Type	Lithium-ion
Charge Input	USB-C (PD 18W recommended)
Charge Output	USB-A (20W PD compatible)
Recharge Time	Approximately 3.4 hours with 18W PD charger
Level Indicator	LED screen displaying percentage (0-100%)
Power Button	Yes, with on/off and display function
Fast Charging	Yes, up to 20W (PD)
Safety Protections	Protection against overvoltage, overheating and short circuits
Included Accessories	USB-C cable, user manual
Maintenance	Clean with a dry cloth, avoid water and moisture
Recycling	Follow WEEE procedures for recycling
Dimensions (estimate)	Approximately 140 x 70 x 15 mm
Weight (estimate)	Approximately 250 g
Warranty	Limited warranty (check manufacturer's terms)

Frequently Asked Questions - FS5100 Xtorm

How to recharge the FS5100 portable battery?

Connect a USB-C cable to the battery input (port 3) and the other end to a wall charger. For fast charging, use a PD 18W charger. The battery fully recharges in about 3.4 hours.

How to check the remaining charge level?

Press the On/Off button once. The LED screen displays the remaining battery percentage from 0% to 100%.

What devices can I charge with this power bank?

You can charge any USB-compatible device, such as smartphones, tablets, earphones, etc. For Apple devices, use a Lightning cable. 20W fast charging is supported if your device and cable are PD compatible.

How to fully turn on or off the power bank?

Press the On/Off button twice to completely turn the device on or off. A single press shows or hides the LED screen.

What does the fast charging indicator mean?

The fast charging indicator lights up when you use an appropriate cable and the connected device supports fast charging (20W USB-C PD and above). This ensures faster charging.

Can I use the battery while it is charging?

Yes, the battery can be used to charge your devices while it is plugged into a power source. This is called pass-through mode.

How to clean and maintain my portable battery?

Use a soft, dry cloth to clean the surface. Avoid any contact with water or high humidity. Do not disassemble the battery and do not expose it to heat.

What to do if the battery no longer charges?

Check the cable and charger. Try another USB-C cable or a PD 18W charger. If the problem persists, contact Xtorm customer service. Do not attempt to repair the battery yourself.

Is the battery protected against overcharging?

Yes, the battery includes protections against overvoltage, overheating, and short circuits to ensure safe use.

How to recycle my portable battery at the end of its life?

Do not throw the battery in household waste. Follow local WEEE procedures for battery recycling. Contact your municipal recycling organization for more information.

USER MANUAL FS5100 Xtorm

Line drawing of a smartphone with 'xtorm' branding and circular design, no readable text or symbols beyond branding

SPECIFICATIONS PRODUCT OVERVIEW1 2

10.000 mAh Li-Polymer / 37Wh

1x USB-C PD 20W

1x USB-C 18W

1x USB-A 22.5W [QC 3.0 18W / SCP 22.5W]

USB-C PD 18W Input

136x71x15 mm

218 grams

1x USB-C PD cable

1x Manual

When using multiple outputs

When using 2 outputs

Share 15W

Share 15W

Share 15W

When using all outputs

Share 15W

Output

USB-C PD 18W

Output

USB-A 22.5W

Output

USB-C 20W

Input

USB-C PD 18W

Power Button

Digital Power Indicator

Official Xtorm Label

CHARGING YOUR DEVICE3 RECHARGING THE POWER BANK 4

Three technical line drawings of a smartphone body, showing front, side, and top views with no text or symbols.

COMPATIBLE DEVICES

3A Connect the USB-C end of the charging cable to the USB-C PD output of the Power Bank and the other end to the input of your device. The charging will start automatically.
3B Charging some devices requires a charging cable other than the one supplied.
E.g. an Apple Lightning ^® or a Micro USB cable.

Three technical line drawings of electronic components: a three-pin plug, a connector pin, and a multi-pin connector (no text or symbols)

4A Connect the USB-C end of the charging cable to output 3 of the Power Bank and the USB end to a wall charger.
4B For the fastest charging possible use a 18W USB-C PD charger. This will fully recharge the Power Bank within 3.4 hours.

LED POWER INDICATOR5 IN THE BOX 6

5A Press the Power Button once to display the battery level remaining in the Power Bank via the LED display. Improved Power Button function:

- single press to turn on/off the display

- double press to fully turn on/off the Power Bank

5B The display shows the remaining battery percentage between 0% (empty) and 100% (fully charged).

5C The fast charge indicator will light up when you are using the correct cable for fast charging your device. (20W USB-C PD and higher).

EN - ENGLISH

1 SPECIFICATIONS

2 PRODUCT OVERVIEW

3 CHARGING YOUR DEVICE

3.A Connect the USB end of the charging cable to the USB-A output of the Power Bank and the other end to the input of your device. The charging will start automatically.

3.B Charging some devices requires a charging cable other than the one supplied. E.g. an Apple Lightning ^4 or a Micro USB cable.

4 RECHARGING THE POWER BANK

4.A Connect the USB-C end of the charging cable to output 3 of the Power Bank and the USB end to a wall charger.

4.B For the fastest charging possible use a 18W USB-C PD charger. This will fully recharge the Power Bank within 3.4 hours.

5 LED POWER INDICATOR

5A Press the Power Button once to display the battery level remaining in the Power Bank via the LED display. Improved Power Button function:

- single press to turn on/off the display

- double press to fully turn on/off the Power Bank

5B The display shows the remaining battery percentage between 0% (empty) and 100% (fully charged).

5C The fast charge indicator will light up when you are using the correct cable for fast charging your device. (20W USB-C PD and higher).

6 IN THE BOX

NL - NEDERLANDS

1 SPECIFICATIES

2 PRODUCT OVERZICHT

3 OPLADEN VAN JOUW APPARAAT

EN When recycling this product, please follow WEEE battery recycling procedures. Contact your local recycling organization for more information.

XTORM SAFETY CHECK WARNINGS

1. TEMPERATURE CONTROL

Provided with a temperature control chip that prevents overheating.

2. OVERLOAD PROTECTION

Protects both the internal battery as well as the battery of the attached device from overcharging.

3. SECURED POWER MANAGEMENT

Automatically picks the correct charging speed and efficiently devides power between attached devices.

4. SHORT CIRCUIT PROTECTION

Breaks the circuit automatically when an overcurrent is detected. This protects the Xtorm charger and your device from short circuit damage.

5. A-CLASS BATTERY CELLS

We only use the best battery cells that provide the fast charging you need and meet all safety requirements.

6. HIGH EFFICIENCY

Our power products are built to power your device as efficient as possible. This ensures the least possible loss of energy during the charging process.

EN Warnings

Don't crop, dissemble or attempt to repair the charger by yourself. Avoid exposure to water or high humidity. Don't expose to any heat source. Keep out of reach of children. Don't use in the presence of flammibia gas. The warranty will lapse in the event of limproper use. Telco Accessories has tested the product in a test environment. All statements/declarations made by Telco Accessories about the operation of the product are based on the results obtained from such tests. These results/statements/declarations cannot be guaranteed, for example in cases of deviating or injudicious use and/or use in a different environment.

NL Waarschuwingen

The image is too blurry to recognize any text content.

BG Предупреждения

EU DECLARATION OF CONFORMITY