FK470 - Clock Fysic - Free user manual and instructions

USER MANUAL FK470 Fysic

AFVOER VAN HET OUDE APPARAAT

KEEP THESE INSTRUCTIONS IN MIND: Do not use this device near water. Clean only with a slightly damp cloth. Do not cover or block any venlaon openings. When placing the device on a shelf, leave 5 cm (2”) free space around the whole device. Install in accordance with the supplied user manual. Don’t step on or pinch the power adaptor. Do not place heavy items on the power adaptor, which may damage it. Keep the enre device out of children’s reach! Unplug this device during lightning storms or when unused for a long period. Keep the device away fromexternal heat sources. Avoid using the device near strong magnec elds. Warning! Never insert an object into the product through the vents or openings. Do not use in wet or moist areas such as bathrooms. This device must operate on a power source as specied on the specicaon label. Always hold the plug when pulling it out of the main supply socket.

10.Although this device is manufactured with the utmost care and checked several mes before leaving the factory, it is sll possible that problems may occur. If you noce smoke, an excessive build-up of heat or any other unexpected pheno- mena, you should disconnect the plug from the main power socket immediately. This device is not intended for use by people (including child- ren) with physical, sensory or mental disabilies, or a lack of experience and knowledge, unless they’re under supervision or have received instrucons about the correct use of the device by the person who is responsible for their safety. This product is intended for non professional use only and not for commercial or industrial use. Make sure the unit is adjusted to a stable posion. Never place this apparatus on other electrical equipment.

Do not ingest the baery, Chemical Burn Hazard. This product contains a coin/buon cell baery. *If corn/buon cell baery is swallowed, it can severe internal burns in just 2 hours and can lead to death. Keep new and used baeries away from children. If the baery compartment does not close securely, stop using the product and keep it away from children. If you think baeries might have swallowed or placed inside any part of the body, seek immediate medical aenon.

• The baery CR-2032 is not included. Cauon Danger of explosion if baery is incorrect replaced. Replace only with the same or equivalent type. 11.Snooze Indicator LED Display 1st Alarm Indicator Buzzer 2nd Alarm Indicator Buzzer 1st Alarm Indicator Radio 2nd Alarm Indicator Radio Baery compartment Speaker Main Plug(AC Cord)

12.RADIO TUNING Press the ON/OFF buon to turn the clock radio on or o. Adjust the “TUNING+” or “TUNING-” to select the desired sta- on: short press the TU+ buon for manual tune, long press the TU+ buon for automac search of the next staon. Press the “VOL +” or “VOL -” buon to adjust the volume.

You select a staon by following point 1 and 2 from the radio tuning secon above Long press PRE/M+, the display will blink on a preset number like P01 or P02… by pressing VOL-/AL1 buon the preset number will decrease; by pressing VOL+/AL2 buon, the preset number will increase and is sll blinking. If you are ready choosing the preset number, short press the PRE/M+ buon to save the staon in this selected preset. To recall a preset, just short press the PRE/M+ buon and the display will show the the radio staon saved in the next preset number.

You must switch o the radio before you set the alarm me. Short Press “ALARM 1” or “ALARM 2” buon: Now you can select to wake up by radio or buzzer. The LED with bell logo stands for wake up to buzzer. The LED with music note logo stands for wake up to radio. Press “ALARM 1” buon to select dierent wake up modes.

13.To set or modify the alarm me you should long press VOL-/ AL1 buon and the display will blink Now you can press the hour and minute buons to adjust the selected alarm me. To conrm the alarm me, short press the VOL-/AL1 buon. You can repeat those operaons for seng alarm 2

Press the “ALARM OFF” buon to stop the alarm. The alarm will operate 24 hours later as per alarm Time set.

Press the “ALARM 1” or “ALARM 2” buons unl all wake up mode icons on display have disappeared. The alarm seng is cancelled now.

You must switch o the radio before you set the clock me. Press and hold the “TIME SET” buon unl the display begins to blink, then release the buon. Press the Hour and Minute buon to adjust the hour and mi- nute. Press the “TIME SET” buon to save me

Press the Sleep buon repeatedly to set the sleep me (90, 80, 70, 60, 50, 40, 30, 20, 10 min or OFF). 14.SNOOZE To use the snooze, press the SNOOZE bar when the alarm is soun- ding. The alarm will stop temporarily, but will resume sounding aer 9 minutes. DIMMER You can select the brightness of the display by pressing the Snooze/Dimmer buon. There are 3 posions: dark, mid and high brightness. SPECIFICATIONS Frequency Range: FM 87.5 –108 MHz Power Source: AC 230V ~ 50 Hz, 3W DC 1 x CR2032 baeries (For back-up, not included) Power Output: 300 mW

DISCARDING OLD EQUIPMENT

Old electric and electronic devices oen contain valuable materials. However, they also contain harmful substances that were necessary for their funco- nality and safety. If these are placed with the non-recyclable waste or disposed of incorrectly, they can be harmful to human health and the environment. Never place your device with the non-recy- clable waste.

The full text of the EU declaraon of conformity is available at the following internet address: hp://DOC.hesdo.com/FK470-DOC.pdfWe provide a warranty of 24 months for this product. The warranty starts on the date of purchase and is intended for faults due to production or the used materials. Your statutory warranty rights in accordance with § 439 ff. BGB-E will remain unaffected by this. The warranty does not apply to damages as a result of improper handling or use, nor to malfunctions that only have a minor effect on the functionality or value of the product. Normal wear and tear, transport damage, to the extent that we are not responsible for this, as well as damages caused by repairs not performed by us, are also excluded from the warrant. This device is designed for household use and has the right performance levels. Any use in commercial situations is only covered by the warranty if the device is not put under a heavier strain that in a household situation. The device is not intended for additional commercial use. In the case of well-founded complaints, we will repair the defective device at our discretion or replace it with a device that shows no problems. WARRANTY WARRANTY Updates to Firmware and/or hardware components are made regularly. Therefore some of the instruction, specifications and pictures in this documentation may differ slightly from your particular situation. All items described in this guide for illustration purposes only and may not apply to particular situation. No legal right or entitlements may be obtained from the description made in this manual. 16.DEUTSCH ACHTUNG: Die zweckenremdete Bedienung, Benutzung oder Einstellung der Prozeduren kann zu gefährlichen Unfällen durch Strahlen führen. Dieses Gerät darf außer von qualizierten Fachleuten von niemand anderem repariert oder eingestellt werden.