Fuxtec FX-E1LB20 - Blower

FX-E1LB20 - Blower Fuxtec - Free user manual and instructions

Find the device manual for free FX-E1LB20 Fuxtec in PDF.

English EN ⬇ Download 💬 AI Question ❓ 10 questions ⚙️ Specs
📄

Document temporarily unavailable

The manual is currently being transferred to our new server. It will be accessible again in a few hours. Thank you for your patience.

Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Cordless Leaf Blower
Brand Fuxtec
Model FX-E1LB20
Power Source 20 V lithium-ion battery (not included)
Rotation speed 17,000 rpm
Blowing speed 38 m/s
Guaranteed sound power level 96 dB(A)
Measured sound pressure level 78 dB(A)
Weight (without battery) 2 kg
Speed control Electronic speed control with dial
Blowing tube Included, removable
Intended use Blowing leaves, grass, paper for private use
On/off switch Turn the adjustment dial
Removable battery Yes
Safety Safety shut-off, protection against short circuits and overheating
Maintenance Clean with a dry cloth, keep contacts clean
Spare parts Use original or manufacturer-approved parts
Warranty According to manufacturer's conditions
Operating temperature Avoid humidity and rain, use in dry weather
Recycling Appliance, accessories and batteries recyclable

Frequently Asked Questions - FX-E1LB20 Fuxtec

How to start the FX-E1LB20 leaf blower?
Insert the battery into the designated rail, then turn the adjustment dial (position 2 on the device) to turn on and adjust the speed.
Which battery to use with the Fuxtec leaf blower?
Use only original Fuxtec 20 V lithium-ion batteries or those recommended by the manufacturer. Using other batteries may pose a risk of fire or injury.
How to clean the leaf blower?
After each use, clean the device with a dry cloth or brush. Never use water or liquid detergents. Keep the battery and device contacts clean and dust-free.
Can the leaf blower be used in the rain?
No, only use the device in dry weather. Keep it away from rain or moisture, as water ingress increases the risk of electric shock.
How to adjust the blowing speed?
The speed is adjusted using the dial on the on/off switch. Turn it to increase or decrease the speed according to the type of debris.
What to do if the device vibrates excessively?
Immediately turn off the device and remove the battery. Check if the blowing tube is properly installed and if any objects are stuck. If vibrations persist, have the device repaired by a specialist.
How to install the blowing tube?
Attach the blowing tube to the front of the device by snapping it into place until it locks. Make sure the locking mechanism is properly engaged before use.
What is the battery runtime?
Runtime depends on the battery capacity and the speed used. Refer to your battery specifications. For optimal use, use a fully charged battery.
How to store the leaf blower?
Turn off the device, remove the battery, and store it in a dry, safe place out of reach of children. The ventilation slots must remain clean.
Where to find spare parts for the FX-E1LB20?
Use exclusively original Fuxtec spare parts or those approved by the manufacturer. Contact your authorized dealer or Fuxtec after-sales service.

User questions about FX-E1LB20 Fuxtec

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Blower in PDF format for free! Find your manual FX-E1LB20 - Fuxtec and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FX-E1LB20 by Fuxtec.

USER MANUAL FX-E1LB20 Fuxtec

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Fuxtec

Model : FX-E1LB20

Category : Blower