HONEYWELL 5105 - Safe

5105 - Safe HONEYWELL - Free user manual and instructions

Find the device manual for free 5105 HONEYWELL in PDF.

📄 10 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice HONEYWELL 5105 - page 2
View the manual : Français FR English EN Español ES
Pick your language and provide your email: we'll send you a specifically translated version.
Brand Honeywell
Model 5105 (range 5103-5113)
Product type Steel security safe
Material Steel
Locking Digital electronic with override key
Power supply 4 AA batteries (non-alkaline or rechargeable not recommended)
Display LED (displays code, status, errors)
Secret code 3 to 6 digits, programmable at each locking
Pre-set code 1-5-9-B
Functions Motorized locking/unlocking, secret code, confidential mode (code masking), audible beep, security lockout period (5 min after 3 wrong codes)
Indicators LED: "CLOSED", "OPENED", "ERROR", "HOLD05", low/good battery level
Emergency opening By override key (2 provided)
Installation Can be fixed to wall or floor (pre-drilled holes, hardware included)
Package contents Safe, instruction manual, 2 keys, 4 AA batteries, assembly kit
Removable shelf Available on models 5103, 5104, 5107, 5108
Warranty 7-year limited (mechanical or structural defects)
Customer service USA/Canada: 1-877-354-5457, Australia: 0011-800-5325-7000, Germany: 00-800-5325-7000
General information Do not return to store, contact customer service. Serial number on bottom right front of safe. Keep labels.

Frequently Asked Questions - 5105 HONEYWELL

How to install the batteries and open the safe for the first time?
Remove the battery compartment cover inside the door. Insert 4 AA batteries (included). Close the cover. To open, enter the pre-set code 1-5-9-B, then turn the handle to the right within 5 seconds.
How to program a new secret code?
Close the door and keep it closed. Enter a new 3 to 6 digit code followed by the lock key. The LED display will show CLOSED for 3 seconds, followed by the active code as a reminder.
What to do if I forget my secret code?
Use the override key to open the safe. With the key in the open position, press clear. Turn the key to the locked position and remove it. You can then open with a new 3 to 6 digit code followed by lock.
How to open the safe with the override key?
Insert the override key and turn it to the right (open position). The safe unlocks. This method is useful if the code is lost or batteries are dead.
What to do in case of wrong code entry?
If you make a mistake before pressing lock, use the clear key to reset. If the wrong code is confirmed, the display shows ERROR. After 3 consecutive wrong codes, a 5-minute security lockout period activates (HOLD05 displayed).
When should I replace the batteries and how to check their status?
Press the lock key once. The LED display shows the level: good battery or low battery. Replace the batteries by removing the compartment cover (inside the door). Use only alkaline batteries. The secret code is not erased during replacement.
How to fix the safe to the wall or floor?
Empty the safe and remove the carpet. Locate the pre-drilled holes inside. Place the safe in the desired location, mark the holes, drill, then secure with the provided bolts, washers, and anchor plates. Do not fix to both wall and floor.
How to remove the removable shelf?
Empty the shelf of all contents and remove the carpet. Lift the shelf and tilt it sideways to pass through the door opening. Keep it for future use.
Where is the serial number located and how to order replacement keys?
The serial number is on a label at the bottom right on the front of the safe. To order keys, provide proof of ownership (receipt or verification form), model number, serial number, and key number (engraved on the metal ring around the lock). Payment is by card or check.
What is the warranty of this safe?
The 7-year limited warranty covers mechanical or structural defects. It is valid only for the original purchaser. For performance, keep the purchase receipt. The warranty does not cover normal wear, damage due to misuse or natural disasters.

User questions about 5105 HONEYWELL

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Safe in PDF format for free! Find your manual 5105 - HONEYWELL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 5105 by HONEYWELL.

USER MANUAL 5105 HONEYWELL

Steel Security Safe with Digital Lock

PACKAGE CONTENTS

1-Steel Security Safe
1-Operation Manual
2-Override Access Keys
4-“AA” Batteries
1-Mounting Kit w/ Bolts

DO NOT RETURN SAFE TO STORE!

For missing parts or difficulty operating your safe, please contact our Consumer Assistance Department by telephone.

Store will not accept returned products without prior authorization. You must first contact our consumer assistance department.

US/Canada 1-877-354-5457 (Toll Free) Australia 0011-800-5325-7000 (Toll Free) Germany 00-800-5325-7000 (Toll Free)

PRODUCT OVERVIEW

HONEYWELL 5105 - PRODUCT OVERVIEW - 1

A - LED Display panel
B - Safe Cabinet Body
C - Safe Door Assembly
D - Electronic Digital Keypad
E - Override Key Cover
F - Serial Number Label

IMPORTANT!

Remove plastic corner protectors (A) from outside of safe door before operating.

HONEYWELL 5105 - IMPORTANT! - 1

SETUP & OPERATION

STEP 1. INSTALL BATTERIES

  1. Open the safe door. (Safe shipped with door unlocked).
  2. Remove battery compartment (A) cover on inside door.
  3. Insert 4 "AA" batteries (included).
  4. Replace the battery cover.
  5. Do not close door before testing digital lock.

HONEYWELL 5105 - STEP 1. INSTALL BATTERIES - 1

STEP 2. TEST DIGITAL LOCK

LOCK SAFE

  1. Enter the factory preset pass code: "1"-"5"-"9"
  2. Immediately after entering the code, press the 'lock' key.
  3. Lock bolts should extend into the locked position.

UNLOCK SAFE

  1. Enter the factory preset pass code: "1"-"5"-"9"
  2. Immediately after entering the code, press the "lock" key.
  3. Lock bolts should recede into the unlocked position.

STEP 3. LOCK SAFE WITH A NEW PASS OF

  1. Close the safe door and hold it closed
  2. Enter a new (3-6 digit) pass code followed by "lock".
  3. Motorized lock will return door to closed position.
  4. The LED will display "CLOSED" for 3 seconds followed by the active code entered as a reminder.

HONEYWELL 5105 - STEP 3. LOCK SAFE WITH A NEW PASS OF - 1

NOTE: The lock design allows for a new user code each time that the safe is locked

STEP 4. OPEN SAFE WITH NEW PASS CODE

  1. To open safe enter the new pass code that was used to lock the safe followed by "lock".
  2. The motorized lock will unlock the door and the LED will display "OPENED".

HONEYWELL 5105 - STEP 4. OPEN SAFE WITH NEW PASS CODE - 1

PRIVACY MODE:

To prevent the LED displaying the pass code entered, press "clear" prior to entering a code.

LOCK SOUND:

To turn "beep" sound On or Off, press the "CLEAR" button twice.

ENTERING THE WRONG CODE

If you press a wrong key while entering your code, you may press "clear" to reset prior to pressing, "lock". If you have entered the wrong code followed by "lock", the LED panel will display "ERROR"

HONEYWELL 5105 - ENTERING THE WRONG CODE - 1

SECURE LOCKOUT PERIOD

If a wrong code is entered 3 times in a row, the digital keypad will begin a five-minute lockout period. During this period the LED will display "HOLD05" and the keypad will become disabled. Once the lockout period has expired, the safe can be unlocked using the active code.

HONEYWELL 5105 - SECURE LOCKOUT PERIOD - 1

You may use the override key to open safe, but keypad will complete the full lockout period.

OVERRIDE ACCESS KEY

If the active code is unavailable or your keypad fails due to dead batteries, etc., you may open the safe using the Override access key.

REPLACING BATTERIES

You may check the battery power at any time by pressing the "lock" key just once. The LED display will show one of the following messages:

HONEYWELL 5105 - REPLACING BATTERIES - 1

Battery power is good

Battery power is low and batteries should be replaced

To replace the batteries please follow the instructions in STEP 2, in the SETUP section. It is NOT RECOMMENDED to use Non-alkaline or rechargeable batteries.

NOTE: The active code will not be erased if the batteries become weak or are removed.

IF YOU FORGET PASSCODE

  1. Insert Override key and turn to right (open position).
  2. With the key in the open position press 'clear' on your keypad.
  3. Turn the key to left (lock) position and remove it from lock.
  4. The safe may be opened by pressing any 3-6 digit code followed by "lock".
  5. You may now enter any new 3-6 digit code and return to normal operation.

ORDERING NEW / REPLACEMENT KEYS

The following information is required to order keys:

1. PROOF OF OWNERSHIP (1 of 2 Options Below)

SALES RECEIPT & IDENTIFICATION -INTERNATIONAL ORDERS ONLY!

  • Copy of sales receipt showing Store, Date & Product Description.

  • Copy of your picture I.D. (Drivers license, passport, regular I.D.).

PRODUCT OWNERSHIP VERIFICATION FORM

If sales receipt is not available, contact us by email or telephone to request a "Product Ownership Verification Form".

2. ORDER INFORMATION

CONTACT INFORMATION

Name & Shipping Address
E-mail address (If Available)
Telephone Number
Best Time to Contact You

PRODUCT INFORMATION

  • Safe Model #
  • Safe Serial #
    LockKey#
    Quantity of Keys Ordered

3. PAYMENT INFORMATION

AMOUNT DUE

Per Key:

US/Canada - $12.00 (USD)

Australia - $15.00 (AUD)

Germany - 11.00 (EU)

Express Delivery:

Contact us for Additional Charges

METHOD OF PAYMENT

Telephone:

Visa or

MasterCard

  • Mail:

Check or

Money Order

Subject to change without prior notification.

LOCATING SAFE IDENTIFICATION NUMBERS

SERIAL NUMBER

Located on lower right corner on front of safe.

Do Not Remove Safe I.D. Tags!

HONEYWELL 5105 - SERIAL NUMBER - 1

KEY NUMBER

4 Digit Number etched on the metal collar

located around the key hole.

HONEYWELL 5105 - KEY NUMBER - 1

MOUNTING KIT

You may bolt your safe to the wall or floor to added theft protection and resistance to tipping. Your safe has pre-drilled bolt-down holes in the back panel and in the floor.

To secure your safe to the wall and/or floor:

  1. Select a suitable and convenient location for your safe.
  2. Empty the safe and remove the carpet
  3. Locate the predrilled holes on the inside of safe
  4. Place your safe in the desired location.
  5. Line up the predrilled holes and mark the floor or wall through the holes.
    NOTE: It is not recommended to attempt to bolt to both floor and wall.
  6. Move the safe aside to clear marked spots for drilling.
  7. Drill holes appropriate for hardware being used and the mounting surface
    INCLUDED: (2 each - bolts, washers and masonry anchors)
  8. Place the safe back over the holes and install the fasteners as required.
  9. Once completed, replace the carpet.

NOTE: Bolting/unbolting of the unit is at the consumer's expense and discretion. LH Licensed Products is not responsible for any costs incurred if the unit is to be replaced

If you have any questions about mounting the safe, please check with your

local home center/hardware retailer or independent contractor.

REMOVABLE SHELF

Models 5103, 5104, 5107 & 5108

If your safe is equipped with a removable shelf, it can easily be removed to accommodate the storage of taller or larger items.

  1. Empty shelf of all contents and remove any carpeting
  2. Remove by lifting and tilting to side to fit through door opening.

DO NOT discard shelf. It is recommended that you for future needs.

LIMITED WARRANTY

LH Licensed Products, Inc., ("LHLP, Inc.") warrants that for a period of seven (7) years from the date of purchase, this product will be free from structural or mechanical defects resulting from materials or workmanship. LHLP, Inc., at its sole option and as the purchaser's sole remedy under this warranty, will repair or replace this product or any component of the product found to be defective during the warranty period. Replacement or repair will be made with a new or remanufactured product or component. If the product is no longer available, replacement may be made with a similar product of equal or greater value. THIS IS YOUR EXCLUSIVE WARRANTY.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

This warranty is only valid for the original retail purchaser from the date of initial retail purchase and is not transferable. You must keep the original sales receipt. Proof of purchase is required to obtain warranty service.

LHLP, Inc. dealers, service centers, or retail stores selling this product do not have the right to alter, modify or in any way change the terms and conditions of this warranty.

This warranty does not apply to the finish on the product. This warranty does not cover normal wear and tear of parts or damage resulting from any of the following: negligent use or misuse of the product, use contrary to the operating instructions, disassembly, repair or alteration by anyone other than LHLP, Inc. or an authorized service center, improper installation, or exposure to extremes of heat or humidity. Further, the warranty does not cover Acts of God, such as fire, flood, hurricanes and tornadoes.

LHLP, Inc. shall not be liable for any incidental or consequential damages caused by the breach of any express or implied warranty or otherwise relating to the sale of this product. LHLP, Inc. is also not responsible for: costs associated with removing or installing the product; damage or loss of the contents of the product; nor for the unauthorized removal of the contents; or damages incurred during shipment.

THE ABOVE WARRANTY IS IN LIEU OF ALL OTHER WARRANTYES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTYES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND LHLP, INC. DISCLAIMS ANY AND ALL OTHER COVENANTS AND WARRANTYES.

Except to the extent prohibited by applicable law, any implied warranty of merchantability or fitness for a particular purpose is limited in duration to the duration of the above warranty period. Some states, provinces or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state, or province to province, or jurisdiction to jurisdiction.

Modèles 5103 - 5113

VUE D'ENSEMBLE DU PRODUIT

HONEYWELL 5105 - VUE D'ENSEMBLE DU PRODUIT - 1

INFORMATION SUR LE PRODUIT

Australie - $15.00 (AUD)

LH Licensed Products, Inc.

860 East Sandhill Avenue

Carson, CA 90746 USA

TELEFONO US/Canada 1-877-354-5457 (Toll Free)

Australia 0011-800-5325-7000 (Toll Free)

Alemania 00-800-5325-7000 (Toll Free)

HORAS DEL CENTRO DE

US/Canada 7am - 5pm (PST) lunes-viernes

LLAMADAS:

Australia 12am - 10am (AEST) martes-sabado

LH Licensed Products, Inc.

860 East Sandhill Avenue

Carson, CA 90746 USA

TELEFONO US/Canada 1-877-354-5457 (Toll Free)

Australia 0011-800-5325-7000 (Toll Free)

Alemania 00-800-5325-7000 (Toll Free)

HORAS DEL CENTRO DE US/Canada 7am - 5pm (PST) lunes-viernes

LLAMADAS: Australia 12am - 10am (AEST) martes-sabado

The Honeywell Trademark is used under license from Honeywell International Inc. Honeywell International Inc. makes no representations or warranties with respect to this product.

LH Licensed Products, Inc.

860 East Sandhill Avenue

Carson, CA 90746

REV.12-07-2011

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : HONEYWELL

Model : 5105

Category : Safe