1106C - Safe HONEYWELL - Free user manual and instructions

Product Type	Electronic Safe
Brand	Honeywell
Model	1106C
Dimensions (Exterior)	15.7 x 12.6 x 10.2 inches (HxWxD)
Dimensions (Interior)	14.2 x 11.0 x 8.3 inches (HxWxD)
Weight	24.5 lbs
Lock Type	Electronic keypad with override key
Power Source	4 x AA batteries (not included)
Battery Life	Approximately 1 year under normal use
Low Battery Indicator	Yes, warning light
Construction Material	Heavy-duty steel body
Security Features	Pry-resistant door, hidden hinges, anti-drill plate
Mounting Options	Pre-drilled holes for floor or wall mounting
Capacity	0.7 cubic feet
User Codes	Up to 8 programmable codes
Overide Key	2 tubular keys included
Warranty	Limited lifetime warranty
Maintenance	Wipe with a damp cloth; avoid abrasives
Spare Parts Availability	Contact Honeywell customer support for replacement keys and batteries
Repairability	Lock mechanism replaceable by qualified technician

Frequently Asked Questions - 1106C HONEYWELL

How do I open the 1106C safe for the first time?

To open for the first time, locate the manual override key (usually on the side), turn to unlock, then slide the handle down. For electronic opening, insert batteries and enter the factory code 1234 then press #.

How do I change the batteries?

Open the safe, locate the battery compartment on the back of the door. Replace with 4 new AA batteries. Ensure correct polarity. Close compartment and test.

What do I do if I forget the electronic code?

Use the manual override key to open the safe. Then you can reset the code by following the instructions in the manual. If you lose the key, contact Honeywell customer support with your proof of purchase.

Can I mount the 1106C to the floor or wall?

Yes, the safe has pre-drilled mounting holes on the back and bottom. Use appropriate hardware (not included) to secure it to a concrete floor or wall studs for added security.

How many user codes can I set?

You can program up to 8 different user codes. Each code can be 3-8 digits long.

The safe beeps but won't open. What's wrong?

First, check if the batteries are low. Replace them if needed. If still not opening, ensure the handle is fully in the down position. If the issue persists, the lock may require resetting by removing the keypad and disconnecting the battery briefly.

Is this safe fireproof?

No, the 1106C is not fireproof. It is designed for burglary protection only. For fire protection, consider a fire-rated safe.

How do I clean and maintain the safe?

Wipe the exterior and interior with a soft, damp cloth. Do not use abrasive cleaners or solvents. Lubricate the lock mechanism occasionally with a graphite-based lubricant.

Where can I get a replacement key?

Contact Honeywell customer support. Provide your safe's model (1106C) and serial number. There may be a fee for replacement keys.

Does the safe have a warranty?

Yes, it comes with a limited lifetime warranty covering defects in materials and workmanship. Keep your receipt for warranty claims.

USER MANUAL 1106C HONEYWELL

• Slide long metal railing (A) into corner pieces with wheels (B)
  • Line up holes located on long metal railing (A) with corner pieces with wheels (B)
• Put screws (8) into holes and attach nuts (8), do not tighten
• Slide short metal railing (C) into corner pieces with wheels (B)
  • Line up holes located on short metal railing (C) with corner pieces with wheels (B)
• Put screws (8) into holes and attach nuts (8), do not tighten
  • Tighten all screws and nuts