TBN 62608 W - Blender BEKO - Free user manual and instructions

USER MANUAL TBN 62608 W BEKO

Abstract circular diagram with intersecting lines and a central dot (no text or symbols)

TBN 62608 W

EN / DE / FR / ES / IT / PL / SL / CS / SRB / SQ / MK / RO / RU / AR

CONTENTS

ENGLISH	03-17
DEUTSCH	18-39
FRANÇAIS	40-55
ESPAÑOL	56-74
ITALIANO	75-92
POLSKI	93-110
SLOVENŠČINA	111-124
CZECH	125-138
СРБИН	139-152
SHQIPTARE	153-166
МАКЕДОНСКИ	167-185
ROMÂNĂ	186-205
RUSSIAN 206-232

Please read this guide first!

Dear Customer,

Thank you for choosing a BEKO product. We would like you to achieve the optimal efficiency from this high quality product which has been manufactured with state of art technology. Please make sure you read and understand this guide and supplementary documentation fully before use and keep it as a reference. Include this guide with the unit if you hand it over to someone else. Observe all warnings and information herein and follow the instructions.

Symbols and their meanings

These symbols are used throughout this guide:

Important information and recommendations regarding the use of the appliance.

Warnings on personal injury or property damage.

Suitable for contact with food.

Do not immerse the appliance, the power cord or the plug in water or in any other liquids.

Electric shock protection rating

1 Important safety and environmental instructions

This section contains safety instructions to prevent hazards that can result in injury or property damage. Any warranty is void if these instructions are not followed.

1.1 General safety

• This appliance complies with international safety standards.
  •Appliance may be used by persons with limited physical, perceptual or mental abilities or persons with a lack of experience and knowledge if they are supervised or given instructions on the operation of the appliance and any relevant risks they may be encountered. children shall not play with the appliance.
• Do not use the appliance if the power cord, the appliance or the appliance blade is damaged. Contact authorized service.
• Use only original parts or parts recommended by the manufacturer.
• Do not disassemble the appliance.
• Do not operate the appliance or its components

1 Important safety and environmental instructions

over or near hot surfaces or do not put on such surfaces.

• Do not use the appliance for hot meals.
• For security reasons, the product would not operate in case you leave the lid open.
  -Your mains power supply shall be in align with the specified information on the type tag.
• Do not use the appliance with an extension cord.
• Do not touch the plug of the appliance while your hands are damp or wet.
• Do not unplug the appliance by pulling on the cord.
• Switch off the appliance and disconnect from supply before changing accessories or approaching parts that move in use.
• Serious injury may result from misuse when emptying the container, during cleaning and when touching the chopping blade with bare hands. Handle the chopping blade carefully, trying to hold it only by its plastic part.
• Never touch the blades while using the appliance. There is a risk of injury due to improper usage.

1 Important safety and environmental instructions

•After cleaning, prior to energizing or assembling the parts, dry the appliance and all of its parts.
- Do not immerse the appliance, the power cord or the plug in water or in any other liquids.
- If you keep the packaging materials, keep them out of the reach of children.
- Children must not use the device. Store the appliance and its electrical cord out of the reach of children.
•Always use the appliance on a stable, flat, clean and dry surface.
•This appliance is intended to be used in household and similar applications such as:

• staff kitchen areas in shops, offices and other working environments,
• farm houses, by clients in hotels, motels and other residential type environments,
• bed and breakfast type environments

- Do not squeeze or bend the power cord and do not rub in on sharp edges in order to prevent any damage. Keep the cord away from hot surfaces and

1 Important safety and environmental instructions

open flames.

• Before using the appliance for the first time, clean all parts carefully which come into contact with food. Please see full details in the “Cleaning” section.
• Do not touch any moving parts of the appliance. Do not attach or remove the parts until the device comes to a complete stop.
• Be careful when handing the sharp cutting blades, emptying the bowl and during cleaning
• Be careful if hot liquid is poured into blender as it can be ejected out of the appliance due to a sudden steaming
  •Always disconnect the appliance from the supply if it is left unattended and before assembling, disassembling or cleaning.
• CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.

1 Important safety and environmental instructions

1.2 Compliance with the WEEE Regulations and Waste Disposal

This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE).

Simple line drawing of a trash bin with crossed lines indicating no waste or discharge (no text or symbols)

This symbol indicates that this product shall not be disposed with other household wastes at the end of its service life. Used device must be returned to official collection point for recycling of electrical and electronic devices. To find these collection systems please contact to your local authorities or retailer where the product was purchased. Each household performs important role in recovering and recycling of old appliance. Appropriate disposal of used appliance helps prevent potential negative consequences for the environment and human health.

1.3 Compliance with RoHS Directive

The product you have purchased complies with EU RoHS Directive (2011/65/EU). It does not contain harmful and prohibited materials specified in the Directive.

1.4 Packaging information

The product's packaging is made of recyclable materials, in accordance with the National Legislation. Do not dispose the packaging waste with the household waste or other wastes, dispose it to the packaging collection areas specified by local authorities.

1.4 What to do for energy saving

Before adding solid food to the appliance, cut them into small pieces as indicated in the manual. Follow the other instructions and durations specified in the manual. If it is applicable for the food to be prepared, select lower speed levels. Turn off and unplug the appliance after use.

2 Your Blender

2.1 Overview

Labeled diagram of a kitchen blender with numbered parts for identification

The values provided with the appliance or its accompanying documents are laboratory readings in accordance with the respective standards. These values may differ depending on the use and ambient conditions.

2 Your Blender

1. Measuringcap
2. Lid
3. Jug
4. Chopping blade
5. Decorative ring
6. Motor unit
7. Speed adjustment button
8. Non-slip base
9. Cable wrap (under the appliance)

Technical data

Voltage: 220-240V\~, 50-60Hz

Power: 600W

Insulation class: ||

The rights to make technical and design changes are reserved.

3 Operation

3.1 Intended use

The appliance is intended for home use only, it is not suitable for professional use.

The appliance is designed to chop small solid foods (e.g. onion, potato, carrot) and fruits (e.g. Strawberries, banana).

3.2 First operation

Clean the parts of the appliance before the first use (see 3.1.)

3.3 Start Up

Line drawing of a kitchen blender with handle and control knob (no text or symbols)

Place the appliance on a fixed and level surface.

1 2 3

To remove the jug (3) from the motor unit (6), turn it to the “☐” symbol and take it out. Place the jug (3) to a level surface and turn and lift the lid (2) turn it to the “☐” symbol and take it out.

Illustration of a blender with liquid being poured into it, showing leaves inside (no text or symbols)

Place the ingredients you would like to prepare in the jug (3) and close the lid (2).

WARNING:

• Do not operate the appliance empty or without a lid.
• Do not touch the blades with bare hands.
• For security reasons, the product would not operate in case you leave the lid open.

3 Operation

• In your fruit milk mixes (strawberry, banana, etc.), fill the milk up to a maximum of 1000 ml. Otherwise, overflows or leaks may occur during the process.
• Do not shred dried fruits such as almonds and hazelnuts with the device.
• You can process food at a maximum temperature of 40^ C in the appliance.
• Do not insert any objects into the jug (3) while the appliance is operating.
• Use the measuring cap (1) port to add material to the jug during the mixing process.

WARNING: Do not remove the material from the jug (3) before the chopping blade (4) stops completely.

Diagram of a blender with labeled parts and directional arrow indicating process flow

Illustration of a blender with control knob and power switch (no text or symbols)

Line drawing of a blender with control knob and power switch (no text or symbols)

Place the jug (3) to motor unit (6) upright, turn it to the “ ^8 ” symbol to lock it in its place.

Plug the appliance to the socket and start operating by selecting the speed level (7).

When mixing is complete, turn the speed adjustment knob (7) to the "0" position and remove the plug from the socket.

3 Operation

3.4 Crushing ice

WARNINGS:

• Add water to the jug (3) to break ice in the appliance.
• To process crushed ice, we recommend adding three quarters of ice and 15 ml of cold drinking water to the container.

Line drawing of a blender with a brush and lid, no text or symbols present

After adding 15 ml of water into the jug (3), add 3/4 ice.

Illustration of a blender with a control knob and a close-up of its blade (no text or symbols)

Plug the appliance to the socket and start operating by selecting the speed level (7).

Illustration of a blender with a lid and handle, showing liquid being placed on top (no text or symbols)

To add more ice during operation, open the measuring cap (1) and add ice cubes.

Illustration of a blender with a control knob and a magnified view of its lid (no text or symbols)

When mixing is complete, turn the speed adjustment knob (7) to the "0" position and remove the plug from the socket.

1 2 3

To remove the jug (3) from the motor unit (6), turn it to the “☐” symbol and take it out. Place the jug (3) to a level surface and turn and lift the lid (2) turn it to the “☐” symbol and take it out.

3 Operation

3.5 "P" position

The process of 1-2 seconds operation in the position "P" on the speed adjustment button (7) is called "PULSE".

For high speed mixing with short strokes, keep the speed adjustment knob (7) in the "P" position. When you release the button, the speed adjustment knob (7) automatically returns to the "OFF" position and the device starts to stop.

3.6 Recipe

In order to obtain a good chopping performance, the amount of food put into the chamber and the size of the food should be selected appropriately. Below is an example for carrots and similar vegetables. It can vary between food types, it is recommended to properly place the food in the chamber.

FOOD TYPE SPEC WEIGHT SPEED TIME
Carrot (apple, pear etc.)	Cut into 15mm*15mm*15mmm	Carrot: 650g Water: 850g	High speed	30s

3.7 Tips for blending

1. To add ice cubes to the mixes while the blender is running, dispose of one ice cube at a time by removing the measuring cap (1). To make the blender mix the ice properly, wait for a few seconds before adding the next ice cube.
2. To add more food, remove the measuring cap (1) and insert the ingredients through the hole. Make sure the food is cut to a size of 2-5 cm to fit through the hole. Put back the cap (1) when you have finished adding ingredients.

3 Operation

1. While blending solid food like raw vegetables, cooked or raw meat, and fruits, always cut these materials into pieces of 2-5 cm length before putting them in the jug (3). Do not put more than 2 units of such food at once in the blender. This will speed up the blending process and reduce the abrasion on the blender blades (8).
2. Unless otherwise described in the recipe, always add the liquid ingredient in the jug (3) first.
3. To blend a drink, put all ingredients in the jug (3) at once.
4. Avoid over-blending. It is usually enough to blend for a few seconds.
5. Over-blending turns food into mush.

4 Cleaning and maintenance

4.1 Cleaning

WARNINGS:

• Never use gasoline, solvents, abrasive cleaners, metal objects, or hard brushes to clean the appliance.
• Be careful when cleaning the chopping blades unit. The chopping blade (4) is sharp. Try not to hold it from the blade side and do not immerse it in water.
• Never clean the blades with bare hands.
• Clean the table blender after each use. Do not let any residual food dry on or in the blender. It will be harder to clean it if you do so.
• Do not use boiling water. The bearings of the blade assembly have a life-long lasting lubrication feature. Using boiling water damages these bearings and shortens the lifetime of the blender.

Diagram of a blender with cooling control and temperature indicator, showing action buttons and thermal display

Turn the appliance off and unplug it. Wait for the appliance to cool down.

1 2 x2

Remove the jug (3) from the motor unit (6). Rinse with water to clean up large food residues that can pile up in the container.

1 2 3

Place the jug (3) in its place. Add warm water and 1 to 1 12 unit of liquid detergent and operate the blender in high speed for a few seconds.

4 Cleaning and maintenance

You can wash the jug (3) and lids in the dish washer.

1 2 3 x2

Unplug the appliance. Remove the jug (3) from the motor unit (6) and rinse it with water. If necessary, repeat the same steps.

Use a soft and damp cloth and a mild amount of cleaning agent to clean the motor unit (6).

4.2 Storage

• If you do not intend to use the appliance for a long time, store it carefully.
• Unplug the appliance before storing.
• Store the appliance in a cool dry place.
• Store the appliance and its cord out of the reach of children.

4.3 Transport and shipping

• During transport and shipping, carry the appliance with its original packaging. The packaging of the appliance will protect the appliance against physical damage.
• Do not put heavy objects on the appliance or its packaging. Otherwise the appliance may be damaged.
• If the appliance is dropped, the appliance may not operate or permanent damage may occur.

Symbol of a trash bin with crossed lines indicating no waste or discharge (no text or labels)

Recycling symbol with three chasing arrows forming a triangle (no text or labels)

Technical diagram of a blender with numbered parts for identification

Line drawing of a blender with handle and control knob (no text or symbols)

Illustration of a blender with liquid being poured into it, showing a hand holding a pencil (no text or symbols)

Diagram of a blender with labeled parts and directional arrow indicating step 1

Illustration of a blender with a control knob and an electrical outlet, showing no text or symbols.

Line drawing of a blender with a side view showing a close-up of its lid and blade (no text or symbols)

Line drawing of a blender with liquid being poured into it, no text or symbols present

Illustration of a blender with a circular button and a magnified view showing the blade (no text or symbols)

Line drawing of a blender with liquid and paper particles, no text or symbols present

Line drawing of a blender with an apple and a circular dial, showing no text or symbols.

Diagram illustrating a blender with temperature measurement, showing cooling effect and thermal change

1 2 3 x2 →

Prohibition sign with crossed-out machine and battery symbol, indicating no liability or prohibition

Labeled diagram of a kitchen blender with numbered parts for identification

Line drawing of a blender with handle and control knob (no text or symbols)

Illustration of a blender with liquid being poured into it, showing leaves and a knife (no text or symbols)

Line drawing of a blender with liquid being poured into it (no text or symbols)

Illustration of a blender with control buttons and a speedometer (no text or symbols)

Illustration of a blender with a lid and handle, showing liquid level and tool (no text or symbols)

Illustration of a blender with control knob and power switch (no text or symbols)

1 2 3

Diagram of a blender with cooling control and temperature indicator, showing action buttons and thermal display

Symbol of a trash bin with crossed lines indicating no waste or discharge (no text or labels)

Labeled diagram of a kitchen blender with numbered parts for identification

Line drawing of a kitchen blender with handle and control knob (no text or symbols)

Illustration of a blender with liquid being poured into it, showing leaves inside (no text or symbols)

Illustration of a blender with control knob and power switch (no text or symbols)

Illustration of a blender with control knob and power button, no text or symbols present

Line drawing of a blender with liquid being poured into it (no text or symbols)

Illustration of a blender with control knob and directional arrow (no text or symbols)

Illustration of a blender with a tool and plastic wrap (no text or symbols)

Illustration of a blender with control knob and power outlet (no text or symbols)

Diagram of a blender with control panel and temperature indicator, showing action buttons and thermal reading.

Diagram showing a blender being poured into a plastic bottle, with three labeled steps and a stopwatch below.

Line drawing of a hand cleaning a kitchen appliance with a cloth (no text or symbols)

Warning symbol for a trash bin crossed out, indicating no waste or discharge

Labeled diagram of a kitchen blender with numbered parts for identification

Line drawing of a kitchen blender with handle and control knob (no text or symbols)

Illustration of a blender being filled with seeds, showing liquid and a pencil (no text or symbols)

Illustration of a blender with control knob and fan (no text or symbols)

Illustration of a blender with control knob and power switch (no text or symbols)

Illustration of a blender with a water dispenser pouring liquid from a tool (no text or symbols)

Illustration of a blender with control knob and fan (no text or symbols)

Illustration of a blender with a blue interior and a tool, no text or symbols present

Illustration of a blender with control knob and power switch (no text or symbols)

Diagram of a blender with control panel and temperature indicator, showing action buttons and thermal reading

Diagram showing a blender with three labeled parts: one being filled with liquid, another with a magnified view of its interior, and a clock-like scale.

1 2 3 x2 →

Prohibition sign with crossed-out trash bin and no text or symbols

Labeled diagram of a kitchen blender with numbered parts for identification

Line drawing of a blender with handle and control knob (no text or symbols)

Illustration of a blender being filled with tea leaves, showing liquid and a tool (no text or symbols)

Diagram showing a blender with labeled parts and directional arrow, including a lock icon.

Illustration of a blender with control knob and power switch, no text or symbols present

Illustration of a blender with control knob and power switch (no text or symbols)

Line drawing of a blender with a water droplet inside, no text or symbols present

Illustration of a blender with control knob and fan (no text or symbols)

Illustration of a blender with a lid and handle, showing liquid being mixed by chopsticks (no text or symbols)

Illustration of a blender with control knob and power switch (no text or symbols)

Diagram of a blender with control panel and temperature indicator, showing action buttons and thermal reading.

1 2 3 x2 →

Symbol of a trash bin crossed out by a diagonal line, with no text or numbers present.

Labeled diagram of a kitchen blender with numbered parts for identification

Line drawing of a kitchen blender with handle and control knob (no text or symbols)

Napravo postavite na trdno in ravno površino.

1 2 3

Da odstranite stekleno posodo (3) iz pogonske enote (6), jo morate zavrteti na simbol “♂” in vzeti dol. Vrč (3) postavi- te na ravno površino ter obr- nite in dvignite pokrov (2), ga obrnite na simbol “♂” in vze- mite ven.

Illustration of a blender with liquid being poured into it, showing a bottle and lid (no text or symbols)

V stekleno posodo (3) dajte sestavine, ki jih želite pripraviti in zaprite pokrov (2).

OPOZORILO:

Illustration of a blender with control knob and fan (no text or symbols)

Illustration of a blender with control knob and power switch (no text or symbols)

Illustration of a blender with water being poured into it (no text or symbols)

V stekleno posodo (3) dajte najprej 15 ml vode, dodajte 3/4 ledu.

Illustration of a blender with control knob and speedometer (no text or symbols)

Illustration of a blender with a spoon and chopsticks, no text or symbols present

Illustration of a blender with control knob and fan blade, no text or symbols present

Ko je mešanje končano, za-vrtite gumb za nastavitev hitrosti (7) v položaj "0" in iz-ključite napravo iz vtičnice.

1 2 3

Da odstranite stekleno posodo (3) iz pogonske enote (6), jo morate zavrteti na simbol "♂" in vzeti dol. Posodo (3) postavite na ravno površino in jo odprite tako, da zavrtite in dvignete pokrov (2) v smeri urinega kazalca.

Diagram showing a blender with cooling control and temperature indicator, including a close-up of the lid and thermal imaging.

Symbol of a fuel pump crossed out by a diagonal line, with no text or labels present.

Technical diagram of a blender with numbered parts for identification

Line drawing of a kitchen blender with control knob and handle (no text or symbols)

Illustration of a blender being filled with sugar cubes, showing liquid and fruit inside (no text or symbols)

Illustration of a blender with control knob and fan (no text or symbols)

Illustration of a blender with control knob and power switch (no text or symbols)

Illustration of a blender with liquid being poured into it (no text or symbols)

Illustration of a blender with control knob and speedometer (no text or symbols)

Line drawing of a blender with a plastic cup and chopsticks (no text or symbols)

Illustration of a blender with control knob and digital display (no text or symbols)

Diagram of a blender with temperature control and directional arrows indicating action

Warning symbol with crossed-out trash bin and no text, indicating no liability or absence of waste.

Ovaj simbol označava da se ovaj proizvod ne sme odlagati zajedno s ostalim kućnim otpadom na kraju njegovog radnog veka. Korišćeni uređaj mora se vratiti na službeno mesto za sakupljanje za recikliranje električnih i elektronskih uređaja. Da biste pronašli ove sisteme za sakupljanje, obratite se lokalnim vlastima ili prodavcu gde je proizvod kupljen. Svako domaćinstvo ima važnu ulogu u vraćanju i recikliranju starih uređaja. Odgovarajuće odlaganje iskorišćenog aparata pomaže u sprečavanju potencijalnih negativnih posledica po životnu sredinu i zdravlje ljudi.

1.3 Usaglašenost sa RoHS direktivom

Labeled diagram of a kitchen blender with numbered parts for identification

Vrednosti date na uređaju ili pratećoj dokumentaciji su laboratorijska očitavanja u skladu sa odgovarajućim standardima. Ove vrednosti mogu da se razlikuju u zavisnosti od korišćenja i ambijentalnih uslova.

2 Vaš Blender

1. Mernašalica
2. Poklopac
3. Bokal
4. Nožić za seckanje
5. Ukrasni prsten
6. Jedinica motora
7. Dugme za prilagođavanje brzine
8. Neklizajuće dno
9. Deo za zamotavanje kabla (ispod uređaja)

Tehnički podaci

Napon: 220-240 V\~, 50-60 Hz

Snaga: 600 W

Klasa izolacije: ||

Prava na tehničke i dizajnerske promene su zadržana.

3 Rad

3.1 Predviđena namena

Line drawing of a kitchen blender with handle and control knob (no text or symbols)

Uređaj stavite na čvrstu i ravnu površinu.

1 2 3

Da biste uklonili stakleni spremnik (3) sa jedinice motora (6), okrenite ga prema oznaci “♂” i izvadite. Postavite bokal (3) na ravnu površinu i okrenite i podignite poklopac (2), okrenite ga do simbola “♂” i izvadite ga.

Illustration of a blender with liquid being poured into it, showing leaves inside (no text or symbols)

Stavite sastojke koje biste hteli da pripremate u stakleni spremnik (3) i zatvorite poklopac (2).

UPOZORENJE:

Illustration of a blender with control knob and power switch (no text or symbols)

Illustration of a blender with control knob and fan (no text or symbols)

Stakleni spremnik (3) namestite uspravno na jedinicu motora (6), okrenite je prema oznaci “⑥” i blokirajte u odgovarajućem položaju.

Ukopčajte uređaj u utičnicu i počnite sa radom biranjem nivoa brzine (7).

Kada završite sa blendanjem, okrenite dugme za podešavanje brzine (7) u položaj "0" i zatim iskopčajte utikač iz utičnice.

3 Rad

3.4 Drobljenje Ieda

UPOZORENJA:

• Dodajte vodu u stakleni spremnik (3) da biste odmrznuli led u uređaju.
• za obradu drobljenog leda preporučujemo da u spremnik dodate tri četvrtine leda i 15 ml hladne pitke vode.

Line drawing of a blender with a brush and lid, showing liquid level (no text or symbols)

Nakon dodavanja 15 ml vode u stakleni spremnik (3), dodajte 3/4 leda.

Line drawing of a kitchen blender with control knob and speedometer (no text or symbols)

Ukopčajte uređaj u utičnicu i počnite sa radom biranjem nivoa brzine (7).

Illustration of a blender with a small object inside, no text or symbols present

Illustration of a blender with a control knob and a close-up view of its lid (no text or symbols)

Kada završite sa blendanjem, okrenite dugme za podešavanje brzine (7) u položaj "0" i zatim iskopčajte utikač iz utičnice.

1 2 3

Da biste uklonili stakleni spremnik (3) sa jedinice motora (6), okrenite ga prema oznaci “♂” i izvadite. Spremnik (3) stavite na ravnu površinu, a zatim okrenite i podignite poklopac (2) u smeru kazaljke na satu da bi se otvorio.

3 Rad

3.5 Položaj "P"

Proces u trajanju od 1 do 2 sekunde u položaju "P" preko dugmeta za podešavanje brzine (7) se naziva "PULSE".

Diagram of a blender with cooling control and temperature indicator, showing action buttons and thermal display

4.3 Transport i otprema

• Za vreme transporta i otpreme, uređaj nosite u originalnom pakovanju. Ambalaža uređaja ga štiti od fizičkih oštećenja.
• Nemojte stavljati teške predmete na uređaj ili njegovu ambalažu. U suprotnom, uređaj se može oštetiti.
• Ako uređaj padne, uređaj možda neće raditi ili može doći do trajnih oštećenja.

Symbol of a waste bin crossed out by a diagonal line, with no text or numbers present.

Labeled diagram of a kitchen blender with numbered parts for identification

Line drawing of a blender with control knob and handle (no text or symbols)

Illustration of a blender with a spoon and leafy liquid being poured into it (no text or symbols)

Illustration of a blender with control knob and fan (no text or symbols)

Illustration of a blender with control knob and power switch (no text or symbols)

Line drawing of a blender with water being poured into it (no text or symbols)

Line drawing of a blender with control knob and fan (no text or symbols)

Illustration of a blender with a glass pitcher and chopsticks (no text or symbols)

Illustration of a blender with control knob and stopwatch, no text or symbols present

Diagram of a blender with cooling control panel and temperature indicator, showing action buttons and thermal reading.

1 2 3 x2 →

Warning sign with crossed-out electrical device and a blank rectangular symbol below

Labeled diagram of a kitchen blender with numbered parts for identification

Line drawing of a kitchen blender with handle and control knob (no text or symbols)

Illustration of a blender being filled with sugar cubes, showing liquid and a knife (no text or symbols)

Illustration of a blender with control knob and power switch (no text or symbols)

Line drawing of a blender with control knob and fan (no text or symbols)

Line drawing of a blender with liquid being poured into it (no text or symbols)

Illustration of a blender with control knob and speedometer (no text or symbols)

Illustration of a blender with a lid and handle, showing liquid being placed on top (no text or symbols)

Illustration of a blender with a control knob and a close-up of its lid (no text or symbols)

Diagram illustrating a blender with temperature control, showing action buttons and thermal reading

1 2 3 x2 →

Prohibition sign with crossed-out trash bin and no text or symbols

Labeled diagram of a kitchen blender with numbered parts for identification

Line drawing of a kitchen blender with handle and control knob (no text or symbols)

Illustration of a blender being filled with sugar, showing liquid and fruit inside (no text or symbols)

Illustration of a blender with control knob and power switch, no text or symbols present

Illustration of a blender with control knob and power button, no text or symbols present

Line drawing of a blender with liquid being poured into it (no text or symbols)

Illustration of a blender with control knob and speedometer (no text or symbols)

Illustration of a blender with a lid and handle, showing liquid being placed on top (no text or symbols)

Illustration of a blender with a control knob and a magnified view of its lid (no text or symbols)

Diagram of a blender with cooling control panel and temperature indicator, showing action buttons and thermal reading.

1 2 3 x2 →

Simple line drawing of a compass inside a circle (no text or symbols)

TBN 62608 W

RU

Simple line drawing of a trash bin with no text or symbols

Labeled diagram of a kitchen blender with numbered parts for identification

Line drawing of a kitchen blender with handle and control knob (no text or symbols)

Illustration of a blender being filled with sugar cubes, showing liquid and a tool (no text or symbols)

Line drawing of a blender with water being poured into it (no text or symbols)

Illustration of a blender with control knob and speedometer (no text or symbols)

Illustration of a blender with a spoon and lid, showing a kitchen setup with chopsticks (no text or symbols)

Illustration of a blender with control knob and speedometer, no text or symbols present

Diagram of a blender with temperature control and action buttons, showing temperature reading and control knob

Line drawing of a hand cleaning a kitchen appliance with a cloth (no text or symbols)

(Guangdong XINBAO Electrical Appliances Holdings Co., Ltd. South Zhenghe Road, Leliu Town, Shunde District, Foshan City, Guangdong, China Tel: [phone]) Китай

Line drawing of a hand cleaning a washing machine with a cloth (no text or symbols)

Diagram of a blender with control panel and temperature indicator, showing action buttons and thermal reading.

Line drawing of a blender with water being poured into it (no text or symbols)

Line drawing of a blender with control knob and fan (no text or symbols)

Line drawing of a blender with a handle and lid, showing internal components and a tool (no text or symbols)

Illustration of a blender with control knob and fan (no text or symbols)

Illustration of a blender with control knob and fan (no text or symbols)

Illustration of a blender with control knob and power switch (no text or symbols)

Line drawing of a modern blender with control knob and handle (no text or symbols)

Illustration of a blender with liquid being poured into it, showing a tool and leafy substance inside (no text or symbols)

Technical diagram of a kitchen blender with labeled parts in English and Chinese

Prohibition sign with crossed-out trash bin and no text or symbols

1-3 معلومات التغليف

Abstract circular diagram with intersecting lines and a central dot (no text or symbols)

TBN 62608 W

AR