Mckinley - Binoculars Leupold - Free user manual and instructions

USER MANUAL Mckinley Leupold

binocular. We trust that all the work we put into it will reward you with years of enjoyment and trouble-free use. Using your Leupold binocular is very simple. However, you must set them to match your eyesight before use. This is done by adjusting the interpupillary distance and focusing the binoculars to your own visual acuity.

ADJUSTING INTERPUPILLARY DISTANCE

The interpupillary distance is simply the distance between the pupils of your eyes. To ensure a clear, single image, the binocular must be set so that the center of each ocular lens is the same distance apart as your own pupils. TO SET THE INTERPUPILLARY DISTANCE:

1. Hold the binocular up to your eyes in the normal manner.

2. Look through the binocular with both eyes open.

3. Move the two barrels (halves) up or down until you see a single,

Setting the diopter adjustment of your binocular properly is very important, as properly adjusted binoculars will prevent eye strain and provide you with a crisp, sharp image. TO SET THE DIOPTER ADJUSTMENT ON RIGHT EYEPIECE DIOPTER ADJUSTMENT MODELS INCLUDING ACADIA (EXCEPT ACADIA 32MM):

1. View an object about 100 yards in the distance.

Cover the right objective lens with your hand.

3. Adjust the center focus wheel (located between the two barrels) until

the image presented to your left eye is clear and sharp.

4. Cover the left objective lens with your hand.

5. Adjust the diopter adjustment dial located around the right barrel,

near the eyepiece, until the image presented to your right eye is clear and sharp. Acadia users will make this adjustment using the small lever between the barrels, near the center focus wheel. Your binocular is now focused for your eyesight. To make any adjustments in the field, simply turn the center focus dial while viewing through both barrels.TO SET THE DIOPTER ADJUSTMENT ON CENTER FOCUS DIAL DIOPTER ADJUSTMENT MODELS (EXCEPT CASCADES AND MOJAVE):

1. View an object about 100 yards in the distance.

2. Cover the right objective lens with your hand.

3. Adjust the center focus wheel (located between the two barrels) until the

image presented to your left eye is clear and sharp.

4. Cover the left objective lens with your hand.

5. Pull up the the diopter adjustment dial on the top of the center focus

dial and adjust the diopter adjustment dial until the image presented to your right eye is clear and sharp.

6. Push down the lockable diopter adjustment dial so that it locks into place.

Your binocular is now focused for your eyesight. To make any adjustments in the field, simply turn the center focus dial while viewing through both barrels. 5TO SET THE DIOPTER ADJUSTMENT ON CENTER FOCUS DIAL DIOPTER ADJUSTMENT MODELS (INCLUDING CASCADES AND MOJAVE):

1. View an object about 100 yards in the distance.

2. Cover the left objective lens with your hand.

3. Adjust the center focus wheel (located between the two barrels) until the

image presented to your right eye is clear and sharp.

4. Cover the right objective lens with your hand.

5. Pull up the the diopter adjustment dial on the top of the center focus

dial and adjust the diopter adjustment dial until the image presented to your left eye is clear and sharp.

6. Push down the lockable diopter adjustment dial so that it locks into place.

Your binocular is now focused for your eyesight. To make any adjustments in the field, simply turn the center focus dial while viewing through both barrels. CLEANING You can clean the fully armored body by simply wiping off any accumulated dirt or dust. Clean the lenses as you would a camera lens. For optimal cleaning, use the Leupold Lens Cleaning System. Begin by using the brush to whisk away dust.

Then use the microfiber cleaning tip, which is impregnated with a special non-liquid cleaning compound, to clean the glass. If you don’t have a Leupold Lens Cleaning System, use a standard lens brush to remove dust and then pure alcohol, high-grade glass cleaner, or pure water on a cotton swab. A NOTE FOR THOSE WHO WEAR EYEGLASSES Leupold binoculars feature eyecups you can twist, or push up and down to accommodate the eye relief distance required when wearing eyeglasses. Leupold optics are engineered and manufactured to standards set and monitored by the design engineers at Leupold’s plant in Oregon. The goal is to provide you with reliable performance at a reasonable price. Should service ever become necessary, this binocular is backed by the Leupold Lifetime Warranty. All service work is performed by the Leupold Product Service department in Beaverton, Oregon. Please take a few minutes to register your product at leupold.com/register. Warranty ServiceLEUPOLD PRODUCT SERVICE If your Leupold binocular fails to perform in any way, you may return it directly to the Leupold factory for service. It is not necessary for your dealer to ship the binocular to Leupold; however, they can be very helpful in determining if factory service is necessary. PLEASE FOLLOW THESE SHIPPING INSTRUCTIONS:

1. Include a note with your name, address, telephone number, e-mail, and

a description of the problem.

2. Pack the binocular in its original box (if you have it) or another suitably

strong shipping box.

3. Wrap the package securely using filament strapping tape on the outside.

4. Ship the binocular by parcel or mail service (insured, if possible) to one of

the following addresses in the United States: BY PARCEL SERVICE: BY POSTAL SERVICE: Leupold Product Service Leupold Product Service 14400 NW Greenbrier Parkway P.O. Box 688 Beaverton, OR 97006-5791 USA Beaverton, OR 97075-0688 USA Our Product Service telephone numbers are [phone] or (800) LEUPOLD (538-7653). We can also be contacted through our Web site at www.leupold.com.

binoculars are engineered and manufactured to standards set, monitored and controlled by Leupold & Stevens, Inc., with the goal of reliable performance at a reasonable price. These binocular products are warranted for as long as the original owner owns them. We warrant them to be free of defects in materials and workmanship and to function satisfactorily under normal use conditions. If at any time these products are found to have defects in materials or workmanship, Leupold will, at its discretion, repair or replace them free of charge, when requested by the original owner. Warranty is void if damage results from unauthorized repair, alteration, or misuse. Warranty is given solely to the original owner and is not transferable. To activate the warranty, register your product at leupold.com. This is a Leupold Lifetime Warranty, and should not be confused with the Leupold Full Lifetime Guarantee, which covers Leupold Golden Ring

.LEUPOLD, GOLDEN RING, MARK 4, the Golden Ring design, the circle-L reticle logo design, and various other marks are registered trademarks of Leupold & Stevens, Inc. All marks, including corporate logos and emblems, are subject to Leupold’s rights and may not be used in connection with any product or service that is not Leupold’s, or in any manner that disparages or discredits Leupold, or in a manner likely to cause confusion. Certain other trademarks used in connection with Leupold products and services are the property of their respective owners, and are used with permission. BOONE AND CROCKETT CLUB and BOONE AND CROCKETT are registered trademarks of the Boone and Crockett Club. NWTF is a registered trademark of the National Wild Turkey Federation. QDMA, and QUALITY DEER MANAGEMENT are trademarks or registered trademarks of the Quality Deer Management Association. RMEF and ROCKY MOUNTAIN ELK FOUNDATION are registered trademarks of the Rocky Mountain Elk Foundation. ADVANTAGE TIMBER and ADVANTAGE TIMBER HD are trademarks or registered trademarks of Jordan Outdoor Enterprises Ltd. MOSSY OAK BREAK-UP, MOSSY OAK BRUSH, MOSSY OAK OBSESSION, and MOSSY OAK TREESTAND are trademarks or registered trademarks of HAAS Outdoors, Inc. A.R.M.S. is a registered trademark of Atlantic Research Marketing Systems, Inc. The ARD (anti-reflection device) is manufactured by Tenebraex Corp. under the name KillFlash, which is a trademark of Tenebraex Corp. We reserve the right to make design and/or material modifications without prior notice. Copyright © 2013 Leupold & Stevens, Inc. All rights reserved.