BHP 1500-2 - Heat gun EINHELL - Free user manual and instructions

USER MANUAL BHP 1500-2 EINHELL

Please unfold page 2-3

Before starting operation, be sure to read the operating and safety instructions!

Proper use

The hot air gun is designed for heating shrink-down plastic tubing, for stripping paints and for welding and shaping plastics.

Attention:

Fire hazard during use! Diagram of the hot air pistol BHP 1500:

1 nozzle

2 2 level ON/OFF switch

level 1: 375^ / 400~l/min

level 2: 500^ / 550l / min

3 suspension shackle

4 power cable

5 Deflector nozzle

6 Fishtail n

7 Cone nozzle 20mm

8 Reflector nozzle

Technical data:

Nominal voltage: 230V 50Hz

Power rating: 1500 watt

Temperature: 375^ / level 1

500^ /level2

Air rate: 400 l/level 1

5501/level2

Sound pressure level LPA : 72 dB(A)

Sound power level LWA: 82 dB(A)

Vibration aW

<2,3 m/s

Weigth 0,7 kg

Safety Instructions:

Before plugging in the power supply cord, be sure that the ON/OFF switch is in the central position.
The nozzle reaches temperatures of up to 600^ . Fire hazard! Wear protective gloves and eye wear. The nozzle should not be touched during operation.
-Allow the hot air pistol to completely cool before putting away.
- Never expose the unit to rain or moisture. Store the unit in a dry place.
Do not leave the unit unattended.
Keep out of reach of children.
- Never direct the air flow at people or animals. Do not use the unit to dry clothing or hair. Do not use the hot air blower as a hair dryer.
Do not use the unit near easily flammable or explosive substances or gasses.
- Never block the hot air flow by plugging or covering the air flow exit.
- Use only original accessory and replacement parts from the manufacturer.
Do not wear loose clothing or jewelry. Wear slip-resistant shoes and wear a hair net for long hair. During operation maintain a secure footing.
- Never use the unit in wet surroundings or in areas with high humidity (bathroom, sauna, etc.).
Check your work area for easily flammable substances and materials before using the hot air pistol.
- Never carry the hot air pistol by the power supply cord.

GB

Only use extension cords with a minimum cross-section area of 1,5 mm²
Repairs (for example power supply cord replacement) should be performed only by a qualified electrician.
- Do not use chemical paint removers or solvents at the same time as the hot air pistol.
Clean the nozzle when soiled.
- Be sure that the openings for air entry and exit are always clean and free of dirt.
Hazardous or poisonous gasses can be freed when removing paint. Be sure to provide adequate ventilation while working indoors.
- Never point the hot air directly at windows or other glass surfaces.

Start of operation:

Be sure that the power supply voltage matches that printed on the model name-plate.

Choose the desired temperature and air quantity with the ON/OFF switch (2). The hot air pistol reaches the working temperature within one minute.

Switch position 1:

1st level - 375 °C / 400 liters per minute.

Center position:

The tool is switched off.

Switch position 2:

2nd level - 500 °C / 550 l liters per

minute

Possible uses for the hot air pistol:

1. Removal of paint and lacquer. Attention! Hazardous or poisonous gasses may be produced while removing paint or lacquer. Be sure to provide adequate ventilation.
2. Removal of stickers and decorations.
3. Loosening of rusted or tightly fastened nuts and metal screws.
4. Thawing of frozen pipes, door locks, etc. Attention: no not attempt to thaw plastic or synthetic pipes.
5. Accentuation of natural wood grains before staining or lacque-ing.
6. Shrinkage of PVC packaging foils and insulation tubes.
7. Waxing and de-waxing of skis.

Caution: Intensive heating means a higher risk of fire and explosion! Ensure good ventilation. Harmful and/or toxic gases and vapors may be emitted.

Choosing the right nozzle:

The deflector nozzle (5) diverts the hot air to protect glass etc. from overheating. Use it to strip paints.
Use the fishtail nozzle (6) to distribute the air uniformly over small areas.
Use the cone nozzle (7) to confine the heat to corners and small areas.
Use the reflector nozzle (8) to solder and shape pipes, to thaw frozen water

pipes and to heat shrink-down insulation tubing.

Maintenance:

Always keep the openings for air entry and exit clean and free of dirt. Clean the hot air pistol with a damp cloth and a household cleaner. Do not clean with solvents.

B3pbIBOONaCHbIX BeUeCTB IN Ra3OB.

3anpeaaetcnpenATCTBOBAtb BixOy BO3dyuHO"0NOTOKa,3akpbiAB OThepCTHeHacaKN.
3KcnnyaTaunnHCTpymehTa pa3peuaaTcNCKJIOUHTeBHO C KOMNNEKTYOUIMN 3aNaChbIMuCACTMnΦpMbI N3"OTOBNTEN.
Pn paObeTc HNCTpyMeHToM He HocuTe PnoCtOpHyo OExkdy u yKpaWeHHa CneDuTe, Tc0bbl NdoWba 6yBuHe bila cKolb3KoI n 3aBra3blBaIte DnIHhBe BOnOcbblnyok.BoBpeMa paObblBbl DoJXhbl HaxoDntCBa YCTOHNHOB NONOKeHHn.
3anpeaaetcA Kcnnyataun HNCTpyMeHTA BO BnAXHbIX 3OHaxnnB NOMEeHEMx C BblcOKO BnAXhctBo (BaHHaKOMHaTa,CayHa nT.D.)
PepaHauanpa0bIc NCTOTOMrOe"oBO3dyxa ydaIte n3 paOoo30hbl ne"KOBOCnIaMeHHouuNecBeeceTBA mATEpnaIbI.
He p3pewaaetcHocHtB NICTOJeT C NOKJIQUeHHbIM 3JEKTPOUHYPOM.
PnIMeHraTe ydInHHTenb CceHHeNEM 3JHKTPOuHpya He MeHee1,5 MM2.
PemOHthe pa6oTb (Hanp- mep, 3aMeHa 3eKtp-OwHpya) pa3peWaaTc npOn3B0dntb NCKIIOuHTeJIbHO CNEUAAINCTAM.
BoBpmaPab3anpeuaeTcOHOBpemHNOIb3OBaTBCRNCTOENTOMXIMUeCKMnCpeCTBaMnDn

ydaeneHnKpaCOKnnnpactbopntenm.

Pn3a"p3HeHn conna PPOUN3BOJNTO ONUCTky
CneIeTe, YTObI BxOJHoe N BbXoJHOE OTBepCTN HAXoJINcB BCE Da B YNCtOM COCTOHHN.
Pnp ydaenHH Kpacok n 60pa60Ke nlaCTMacc Mo"yt BbIeTbCBApeHBe Dn3doPoBBnNnRdoBtBe ra3bl. PoTOMy BO Bpemra paoTbB NomeeHn DOJXHa 6bIb ObecneHHe DoCTaTOHAR BEHTINAHU.
3anpeaaetcHnpaBnTb ropanu Bo3dy HA OKHa nIpy"NE CTKnHbIe NOBepxHocTH.

IyckB3Kcnnyatauio:

IpoBepbTe,cooTBeCTByet nHa npJxHeN B cTeYka3AHOMy Ha Ta6mUKe NcHcTpymEHTa CeTeBOMy HApJxHeHHo.C NOMOJIbBOBkIOuTaTei (2) yCTaHOBnTE Tpe6yEmy opaOHyo TEMnepaTyP u3aHcyHe NOToka BO3dYa.B TeChHe OndH MInHyTbI NICTOneT DoCTn"aeT paOchey TemnepaTypbl.

IpeeknueHne 1:

1ctyneh:375°C/400n/MnH.

CpeHnno3nna

HCTpyMeHT BBIKIOeH.

IpeekJIOUeHne 2:

2cTynb:500°C/550n/MnH.

0bactn npmehen nctoeta ropae"O Bo3dyxa:

1. ydaene Kpaocn naKOB. BHIMAHNE: Pnp ydaene Hn Kpaocn n JAKOB Mo"yt BbldntBcBpeHbIe dnn 3DopobBaN/INn RDoBtBe ra3bl. NToTMy BO BPem pa60Tb I NOMeuenn DOJnxHa 6bTb oecneetae DOCTaTOHAR BEHTINNAH
   2.YaIeHHe cAMOKJIeauXcA KAPTHHOK NII DEKopaU.
2. Paccna6IeHne pKaBbIX nIy"O 3aKpyeHHbIX raeK INMeTaIIINueckNX uypynOB.
3. Pa3mopaxnBaHne 3aMep3uXn Tpy6, DBePbIx 3aMKOB N T.J.BHmAmHe: 3aNpeaetcpa3mopaxnBaT PnactMaCCOBbe Tpy6bl.
4. BbIeHHe eCTeBHeHn TeKCTypbl DpeBeCInhI nepeTem KaKa HaeCTu Kpacntelb DnA DpeBecInhI INN NaK.
5. HacaxkBaHme ynakobOCHn PBX-nnEKn n30JauoHbIX tpy6.
6. HaheceHne Bocka Ha IbIXn ydaJeHne.

BHHMaHHe: CnIbHoHe Ha"peBaHHe MOKeT NOBLeYb 3a CO6oN NOxap uIN B3pBIB! NToTOMy DOJXHa 6bItb OeBCNeHae DoCTaTOHAR BEHTINuA. BvIDEnaOuNecE ra3bl n napbl Mo"yt OKa3bIBaTb

BpeHoe H/nn ADOBnTOe BO3DeIcTBnHa 3doPObBe.

Bb6op COOTBECTBYUUX HacaOK:

NoBopoTHaHacaJaKa(5), 6na"OapnOBopoTy ropYe"o Bo3Dyxa, npEdoxpaHnet, HApnPmep, CTeKJIHHbIe Wai6bl OT nepe"peBaHn. YdaeneHne KpaCok.
山pokoctpyHnHa HacaKa (6) obceneuBaet PABHOmePhe paCpeDeneHeO3dyXHa Ha He60blxN NOBepxHOCTx.
PepykuHnHaHn HacaKa (7) npEHa3HaTaCn Dnna 06pa6tKn ropuM Bo3dyxom y"JIOB NIN NaHHN.
PepfkeKTopnHaH hacaIka (8) npedha3HaayaeTcI IaI naHHnni FpOmbaHnra Tpy6, Ipa3MopaxbHnra 3AmOpoxeHHbIX Tpy6 I nIpa HacaxnbHnra N3OJIauIOHHbIX Tpy6.

yxoid:

CleJeIte, YTo6bI BXoHbIe I bIxOaHbIe OTBepCTnB O3dyxa 6blnnuCTbIMn. Nuctonet ropae"O B03dyxa CneJyET OOnuTaB BlaXKnOH caNfTeKOn I XO3JIcTBeHHbIM MoIOUmI cpeCTBOM. 3anpeuaetc dnn OChKTn PnpMeHArb pactBOpnten.

PL

Eschenstraße 6 - D-94405 Landau/Isar (Germany)

Info-Tel.[phone](62CtMin.)Telefax09951-2610und5250

Technical changes subject to change

The guarantee period begins on the sales date and is valid for 2 years.

Responsibility is assumed for faulty construction or material or functional defects.

Any necessary replacement parts an necessary repair work are free of charge.

We do not assume responsibility for consequential damage.

Your customer service partner

CERITIFICATO DI GARANZIA

@An, Mayrofdopoulos S.A.

Technical & Commercial company

1. Papastratou & Askliplou St

GR 18545 Piraus

Tel [phone], Fax [phone]

(uns)Bermas

Altufeyskoye shosse, 2A

BUS 127273 Moscow

Tel [phone].Fax [phone]

EH 01/2003