TC-PO 1100/2 E - Polisher EINHELL - Free user manual and instructions
Find the device manual for free TC-PO 1100/2 E EINHELL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Polisher |
| Brand | Einhell |
| Model | TC-PO 1100/2 E |
| Power Input | 1100 W |
| Power Supply | 230 V / 50 Hz |
| No-Load Speed | 2500 - 6000 rpm (electronic variable) |
| Speed Settings | 2 preset speeds (low/high) with electronic adjustment |
| Backing Pad Size | 125 mm (5 in) |
| Thread | M14 |
| Weight | 2.5 kg |
| Dimensions (L x W x H) | 310 x 120 x 160 mm |
| Cable Length | 2 m |
| Soft Start | Yes |
| Lock-On Button | Yes |
| Overload Protection | Yes |
| Vibration Control | Vibration-dampened handles |
| Dust Protection | Motor with dust protection |
| Spindle Lock | Yes (for easy pad change) |
| Application | Polishing, waxing, sanding (with optional pad) |
| Maintenance | Clean air vents regularly; check brush wear annually |
| Safety Class | II (double insulated) |
| Accessories Included | Wool bonnet, sponge pad, side handle |
Frequently Asked Questions - TC-PO 1100/2 E EINHELL
How do I change the polishing pad on the Einhell TC-PO 1100/2 E?
Press the spindle lock button to secure the shaft, then unscrew the backing pad clockwise (left-hand thread). Attach the new pad by hand-tightening counterclockwise.
What is the correct speed for polishing car paint?
Use the low speed setting (approx. 2500 rpm) for applying polish and the high setting (up to 6000 rpm) for buffing. Always start slow to avoid damage.
Can I use this polisher for sanding?
Yes, with an optional sanding pad and hook-and-loop sandpaper. The variable speed allows controlled sanding operations.
How do I clean the polisher after use?
Disconnect from power. Wipe the exterior with a damp cloth. Do not use solvents. Clean the air vents with a brush. Store in a dry place.
What is the warranty period for the Einhell TC-PO 1100/2 E?
Einhell offers a standard 2-year warranty for this polisher, extendable up to 10 years upon registration on their website.
Why does the polisher vibrate excessively?
Excessive vibration may indicate an unbalanced pad or worn bearing. Check that the pad is properly centered and tightened. If vibration persists, inspect the backing pad for damage.
Can I use a different backing pad size?
The TC-PO 1100/2 E is designed for 125 mm (5 in) pads with M14 thread. Using a different size may affect balance and performance.
How often should I replace the carbon brushes?
Carbon brushes should be inspected after approximately 100 hours of use. Replace them when they are shorter than 5 mm to maintain motor performance.
Is the polisher suitable for wet polishing?
No, this polisher is not designed for wet use. It is intended for dry polishing and sanding only to avoid electrical hazards.
What does the 'E' in the model name stand for?
The 'E' in TC-PO 1100/2 E indicates electronic speed control, allowing variable speed adjustment for different applications.
User questions about TC-PO 1100/2 E EINHELL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Polisher in PDF format for free! Find your manual TC-PO 1100/2 E - EINHELL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TC-PO 1100/2 E by EINHELL.
USER MANUAL TC-PO 1100/2 E EINHELL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : EINHELL
Model : TC-PO 1100/2 E
Category : Polisher