RT-AG 100 - Angle Grinder EINHELL - Free user manual and instructions
Find the device manual for free RT-AG 100 EINHELL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of Product | Angle Grinder |
| Brand | Einhell |
| Model | RT-AG 100 |
| Power Consumption | 850 W |
| Rated Voltage | 230 V ~ 50 Hz |
| No-load Speed | 11000 rpm |
| Disc Diameter | 100 mm |
| Spindle Thread | M10 |
| Weight | 1.8 kg |
| Protection Class | II (Double Insulated) |
| Cable Length | 2 m |
| Sound Pressure Level | 85 dB(A) |
| Vibration Level | 5.5 m/s² |
| Safety Switch | Yes |
| Includes Side Handle | Yes |
| Includes Grinding Disc | Yes (1 piece) |
| Includes Guard | Yes |
| Includes Wrench | Yes |
| Motor Type | Brushed |
| Intended Use | Grinding and cutting metal, stone |
| Spindle Lock | Yes |
Frequently Asked Questions - RT-AG 100 EINHELL
How do I change the grinding disc on the Einhell RT-AG 100?
Unplug the tool. Press the spindle lock to secure the spindle. Use the provided wrench to loosen the flange nut. Remove the old disc, install the new one (ensure the arrow direction matches rotation), and tighten the nut securely.
What safety precautions should I take when using the angle grinder?
Always wear safety goggles, hearing protection, and gloves. Ensure the guard is in place. Do not use damaged discs. Keep the power cord away from the rotating disc. Never operate without the side handle.
Can I use the RT-AG 100 for cutting tiles?
Yes, with a suitable diamond cutting disc. Ensure the disc is rated for the material and the speed matches the grinder's 11000 rpm.
What maintenance does the angle grinder require?
Regularly clean ventilation slots with a soft brush. Check carbon brushes after 50-100 hours; replace if worn. Lubricate the gearbox periodically. Store in a dry place.
Why does my grinder overheat?
Possible causes: clogged air vents, excessive load, dull disc, or worn carbon brushes. Allow the tool to cool down and address the issue. If overheating persists, consult a service center.
How do I replace the carbon brushes?
Unplug the grinder. Remove the brush caps on the sides. Take out the old brushes and insert new ones (identical type). Reinstall caps. Run the tool for a few minutes to seat the brushes.
What disc sizes are compatible with the RT-AG 100?
Only use discs with a diameter of 100 mm and a bore of 16 mm or 22.2 mm (with adapter). Maximum thickness: 4 mm for cutting discs, 6 mm for grinding discs.
Is the Einhell RT-AG 100 suitable for stainless steel?
Yes, but use a dedicated stainless steel grinding or cutting disc. Avoid overheating the material; apply light pressure and let the disc do the work.
How do I attach the side handle?
Screw the side handle into one of the two threaded holes on the gear housing. Tighten firmly by hand. The handle can be positioned on either side for comfort.
What does the spindle lock do?
The spindle lock prevents the spindle from rotating, allowing you to safely loosen or tighten the flange nut when changing discs. Press and hold the lock button while using the wrench.
User questions about RT-AG 100 EINHELL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Angle Grinder in PDF format for free! Find your manual RT-AG 100 - EINHELL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RT-AG 100 by EINHELL.
USER MANUAL RT-AG 100 EINHELL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : EINHELL
Model : RT-AG 100
Category : Angle Grinder