TC-ID 500 E - Drill EINHELL - Free user manual and instructions
Find the device manual for free TC-ID 500 E EINHELL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Impact Drill |
| Power Input | 500 W |
| No-Load Speed | 0 - 2800 rpm |
| Impact Rate | 0 - 48000 bpm |
| Chuck Type | Keyed Chuck |
| Chuck Capacity | 1.5 - 13 mm |
| Drilling Capacity in Concrete | 16 mm |
| Drilling Capacity in Steel | 13 mm |
| Drilling Capacity in Wood | 30 mm |
| Variable Speed | Yes |
| Forward/Reverse | Yes |
| Power Supply | 230 V / 50 Hz |
| Dimensions (L x W x H) | 260 x 190 x 70 mm |
| Weight | 1.7 kg |
| Additional Handle | Yes, auxiliary handle |
| Depth Stop | Yes |
| Soft Grip | Yes |
| Power Cord Length | 2 m |
| Protection Class | Class II (Double Insulated) |
| Maintenance | Keep ventilation slots clean and free of dust |
| Accessories Included | Depth stop, auxiliary handle, chuck key |
| Spare Parts Availability | Available from Einhell service partners |
| Repairability | Designed for repair, replaceable carbon brushes |
| Brand | Einhell |
| Model | TC-ID 500 E |
Frequently Asked Questions - TC-ID 500 E EINHELL
What is the power rating of the Einhell TC-ID 500 E drill?
The Einhell TC-ID 500 E is equipped with a 500 W motor, providing sufficient power for drilling into wood, steel, and concrete.
Does the TC-ID 500 E have an impact function?
Yes, it is an impact drill with an impact rate of up to 48,000 bpm, suitable for masonry and concrete.
What is the maximum drilling capacity of this drill?
The maximum drilling capacities are: 16 mm in concrete, 13 mm in steel, and 30 mm in wood.
Does the TC-ID 500 E have a variable speed trigger?
Yes, the drill features a variable speed trigger (0-2800 rpm) for precise control when starting holes or driving screws.
Can the drilling direction be reversed?
Yes, a forward/reverse switch is provided, allowing you to remove screws or jammed drill bits easily.
What type of chuck does the TC-ID 500 E use?
It uses a keyed chuck with a capacity of 1.5-13 mm. A chuck key is included for secure bit locking.
Is an auxiliary handle included?
Yes, an auxiliary handle and a depth stop are included for better control and consistent drilling depth.
How do I maintain the drill?
Keep the ventilation slots clean and free of dust, and periodically check the carbon brushes for wear. Replace them when necessary.
What safety features does the drill have?
The drill is double insulated (Class II), so no earth connection is required. Always disconnect power before changing accessories.
Where can I find spare parts?
Spare parts such as carbon brushes, chucks, and switches are available through Einhell service partners or online accessories stores.
User questions about TC-ID 500 E EINHELL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual TC-ID 500 E - EINHELL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TC-ID 500 E by EINHELL.
USER MANUAL TC-ID 500 E EINHELL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : EINHELL
Model : TC-ID 500 E
Category : Drill