TP-MX 1700-2 CE - Drill EINHELL - Free user manual and instructions
Find the device manual for free TP-MX 1700-2 CE EINHELL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Impact drill |
| Brand | Einhell |
| Model | TP-MX 1700-2 CE |
| Power consumption | 1700 W |
| No-load speed | 0-600 / 0-2600 rpm (2 speeds) |
| Chuck | 13 mm self-tightening |
| Drilling capacity steel | 13 mm |
| Drilling capacity wood | 40 mm |
| Weight | 4.5 kg |
| Power supply | Mains 230 V ~ 50 Hz |
| Cable length | 3 m |
| Dimensions (L x W x H) | 350 x 220 x 80 mm |
| Color | Red / Black |
| Sound level | LpA 85 dB(A), K=3 dB |
| Vibration | < 2.5 m/s² |
| Functions | Drilling, impact drilling, screwdriving |
| Auxiliary handle | Yes, removable |
| Protection | Double insulation |
| Protection class | II |
| Safety features | Variable speed, spindle lock |
| Included accessories | Chuck, auxiliary handle, depth stop |
| Maintenance | Regularly clean ventilation slots |
| Repairability | Spare parts available on the Einhell website |
| General information | Instruction manual included, 140 pages |
Frequently Asked Questions - TP-MX 1700-2 CE EINHELL
How to change the chuck?
To change the chuck, use a chuck key (not supplied) or a hexagonal rod. Insert the key into the chuck hole, turn counterclockwise to unscrew, then replace with a new compatible chuck.
How to adjust the speed?
Use the speed selector with two positions located on top of the drill. Position 1 for low speed (high torque), position 2 for high speed (fast drilling). Make sure the drill is stopped when changing.
What is the maximum power?
The maximum power consumption is 1700 W. This allows drilling hard materials like steel or concrete with the impact option.
Can I use SDS bits?
No, this drill is equipped with a standard self-tightening chuck (13 mm max). SDS bits require a special SDS chuck and are not compatible. Use cylindrical bits.
How to clean the drill?
Unplug the device. Clean the housing with a damp cloth and mild detergent. Never use flammable products. The ventilation slots should be dusted regularly with a brush.
What to do if the chuck jams?
If the chuck jams, unplug the drill. Try to release it by turning the chuck manually. If that doesn't work, use a adjustable wrench or lubricant (WD-40) on the jaws. Avoid forcing.
How to use the impact function?
To activate the impact, slide the mode selector towards the hammer symbol. Use this function for drilling concrete, stone or brick. For wood or metal, deactivate it.
What type of lubrication?
Lubricate the chuck occasionally with a drop of light oil. The gears are greased at the factory and do not require additional lubrication. Do not use thick grease.
How to replace the carbon brushes?
The carbon brushes are accessible from the rear after unscrewing the caps. Use Einhell replacement carbon brushes of the same size. Insert the new brushes, replace the caps, then run the drill at no load to break them in.
Where to find spare parts?
Spare parts are available on the www.einhell.com website in the Service section or from authorized dealers. Use the model number TP-MX 1700-2 CE to identify the correct parts.
User questions about TP-MX 1700-2 CE EINHELL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual TP-MX 1700-2 CE - EINHELL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TP-MX 1700-2 CE by EINHELL.
USER MANUAL TP-MX 1700-2 CE EINHELL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : EINHELL
Model : TP-MX 1700-2 CE
Category : Drill