Tune Beam - Wireless Earbuds JBL - Free user manual and instructions

USER MANUAL Tune Beam JBL

EU DECLARATION OF CONFORMITY

2. Name and address of the manufacturer's authorised representative:

Harman International Industries, Incorporated EMEA Liaison Office, Danzigerkade 16G,1013 AP Amsterdam,The Netherlands

3. This declaration of conformity is issued under the sole responsibility of the manufacturer:

Harman International Industries, Incorporated 8500 Balboa Blvd, Northridge, CA 91329, UNITED STATES

4. Object of the declaration:

5. The object of the declaration described above is in conformity with the relevant Union harmonisation

legislation directive and Other Union harmonisation legislation where applicable: RED - 2014/53/EU, RoHS - (EU) 2015/863 amending Annex II to 2011/65/EU,

6. References to the relevant harmonised standards used or references to the other technical spec-

ifications in relation to which conformity is declared. References must be listed with their identification number and version and, where applicable, date of issue: EN 55032: 2015+A1:2020, EN 55035: 2017+A11:2020, EN IEC 61000-3-2: 2019+A1:2021, EN 61000-3-3:2013+A1:2019, EN 301 489-1 V2.2.3, EN 301 489-17 V3.2.4, EN 300 328 V2.2.2

7. Where applicable, the notified body … (name, number) … performed … (description of intervention)

….. And issued the EU-type examination certificate: …

8. Where applicable, description of accessories and components, including software, which allow the

radio equipment to operate as intended and covered by the EU declaration of conformity:

9. Additional information:

(Signature): (Name. Function): Clarice Chen Sr. Manager. Product Compliance & Sustainability Signed for and on behalf of: Harman International Industries, Incorporated (Place and date of issue): Shenzhen, China. 2023-01-28 No. HP-20230128-009UK DECLARATION OF CONFORMITY

2. Name and address of the manufacturer's authorised representative:

Harman International Industries, Incorporated Ground Floor, Westside 2, London Road, Apsley, Hemel Hempstead, Hertfordshire, HP3 9TD, United Kingdom.

3. This declaration of conformity is issued under the sole responsibility of the manufacturer:

Harman International Industries, Incorporated 8500 Balboa Blvd, Northridge, CA 91329, UNITED STATES

4. Object of the declaration:

5. The object of the declaration described above is in conformity with the relevant Union harmonisation

legislation directive and Other Union harmonisation legislation where applicable: Radio Equipment Regulations 2017 The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012

6. References to the relevant harmonised standards used or references to the other technical spec-

ifications in relation to which conformity is declared. References must be listed with their identification number and version and, where applicable, date of issue: EN 55032: 2015+A1:2020, EN 55035: 2017+A11:2020, EN IEC 61000-3-2: 2019+A1:2021, EN 61000-3-3:2013+A1:2019, EN 301 489-1 V2.2.3, EN 301 489-17 V3.2.4, EN 300 328 V2.2.2

7. Where applicable, the notified body … (name, number) … performed … (description of intervention)

….. And issued the EU-type examination certificate: …

8. Where applicable, description of accessories and components, including software, which allow the

radio equipment to operate as intended and covered by the EU declaration of conformity:

9. Additional information:

4. Deklareeritav toode: