233740 - Food Warmers Hendi - Free user manual and instructions

USER MANUAL 233740 Hendi

HEATED COUNTERTOP CABINET

233740

GB:User manual	7	LV:Lietolāja rokasgrāmala	45
DE:Benutzerhandbuch	9	LT:Naudojimo instrukcija	47
NL:Gebruikershandleiding	13	PT:Manual do utilizador	50
PL:Instrukcja obstugi	16	ES:Manual del usuario	53
FR:Manuel de l'utilisateur	19	SK:Použivatelšká príručka	56
IT:Manuale utente	22	DK:Brugervejledning	59
RO:Manual de utilizare	25	FI:Käyttöopas	62
GR:Eyxepiðio xpořotn	28	NO:Brukerhändbok	64
HR:Korisnički príručnik	31	SI:Navodila za uporabo	67
CZ:Uživatelská příručka	33	SE:Anvándarhandbok	70
HU:Felhasználói kézikönyv	36	BG:Přkovodство за потребителя	73
UA:Посібник користувача	39	RU:Руководство пользователя	76
EE:Kasutusjuhend	42

HEATED COUNTERTOP CABINET

WARMHALTEVITRINE

OPZET WARMHOUDKAST

TOPLINSKI ORMAR S POLICAMA

NASTAVITELNÁ OHŘÍVACÍ SKŘÍŇ

PULTRA HELYEZHETŐ MELEGENTARTÓ VITRIN

GB: Read user manual and keep this with the appliance.

GB: For indoor use only.

Simple line drawing of a wine glass with a fork (no text or symbols)

GB: NOTE: This manual is translated from original English manual using AI and machine translations.

Thank you for purchasing this HENDI appliance. Read this user manual carefully, paying particular attention to the safety regulations outlined below, before installing and using this appliance for the first time.

Safety instructions

• Only use the appliance for the intended purpose it was designed for, as described in this manual.
• The manufacturer is not liable for any damage caused by in correct operation and improper use.

• DANGER! RISK OF ELECTRIC SHOCK! Do not attempt to repair the appliance by yourself. Do not immerse the electrical parts of the appliance in water or other liquids. Never hold the appliance under running water.

- NEVER USE A DAMAGED APPLIANCE! Check the electrical connections and cord regularly for any damage. When damaged, disconnect the appliance from the power supply. Any repairs should only be carried out by a supplier or qualified person to avoid danger or injury.

- WARNING! When positioning the appliance, route the power cable safely if necessary to avoid unintentional pulling, being damaged, coming into contact with the heating surface, or causing a tripping hazard.

- WARNING! As long as the plug is in the socket the appliance is connected to the power supply.

- WARNING! ALWAYS switch off the appliance before disconnecting from the power supply, cleaning, maintenance or storage.

- Only connect the appliance to an electrical outlet with the voltage and frequency mentioned on the appliance label.

- Do not touch the plug/electrical connections with wet or damp hands.

- Keep the appliance and electrical plug/connections away from water and other liquids. If the appliance falls into water, remove the power supply connections immediately. Do not use the appliance until it has been checked by a certified technician. Failure to follow these instructions will cause life threatening risks.

- Connect the power supply into an easily accessible electrical outlet so you can disconnect the appliance immediately in case of emergency.

- Make sure the cord does not come in contact with sharp or hot objects and keep it away from open fire. Never pull the power cord to unplug it from the socket, always pull the plug instead.

- Never carry the appliance by its cord.

- Never try to open the housing of the appliance yourself.

- Do not insert objects into the housing of the appliance.

- Never leave the appliance unattended during use.

- This appliance should be operated by trained personnel in kitchen of the restaurant, canteens or bar staff, etc.

- This appliance should not be operated by persons with reduced physical, sensory or mental capabilities, or persons that have a lack of experience and knowledge.

- This appliance should, under any circumstances, not be used by children.

- Keep the appliance and its electrical connections out of reach of children.

- Never use accessories or any extra devices other than those

supplied with the appliance or recommended by the manufacturer. Failure to do so could pose a safety risk to the user and could damage the appliance. Only use original parts and accessories.

• Do not operate this appliance by means of an external timer or remote-control system.
• Do not place the appliance on a heating object (gasoline, electric, charcoal cooker, etc.).
• Do not cover the appliance in operation.
• Do not place any objects on top of the appliance.
• Do not use the appliance near any open flames, explosive or flammable materials. Always operate the appliance on a horizontal, stable, clean, heat-resistant and dry surface.
• The appliance is not suitable for installation in an area where a water jet could be used.
• Leave a space of at least 20 cm around the appliance for ventilation during use.
• WARNING! Keep all ventilation openings on the appliance free from obstruction.

Special safety instructions

• This appliance is intended for commercial use.
CAUTION! RISK OF BURNS! HOT SURFACES! The temperature of the accessible surfaces are very high during use. Touch only the control panel, handles, switches, timer control knobs or temperature control knobs.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- Do not overload the interior shelves. The maximum load refers to "Technical specifications".

Intended use

• This appliance is intended to be used for commercial applications, for example in kitchens of restaurants, canteens, hospital and in commercial enterprises such as bakeries, butcheries, etc., but not for continuous mass production of food.
• The appliance is designed to keeping food warm. Any other use may lead to damage to the appliance or personal injury.
• Operating the appliance for any other purpose shall be deemed a misuse of the device. The user shall be solely liable for improper use of the device.

Grounding installation

This appliance is classified as protection class I and must be connected to a protective ground. Grounding reduces the risk of electric shock by providing an escape wire for the electric current.

This appliance is fitted with a power cord with grounding plug or electrical connections with grounding wire. The connections must be properly installed and grounded.

Main parts of the product

(Fig.1 on page 3)

1. Shelf
2. Glass door
3. Temperature display
4. Water Bowl

Remark: The content of this manual applies for all listed items unless specified otherwise. The appearance may vary from the shown illustrations.

Control panel

(Fig.2 on page 3)

1. Power switch
2. Light switch
3. Temperature setting knob
4. Heating indicator
5. Temperature display

Circuit diagram

(Fig.3 on page 4)

A. Switch
B. Thermostat
C. Switch
D. Lamp
E. Non self-resetting thermal cut-out
F. Self-resetting thermal cut-out
G. Indicator lamp
H. Heating element

Preparation before use

• Remove all protective packaging and wrapping.
• Check that the device is in good condition and with all accessories. In case of incomplete or damaged delivery, please contact the supplier immediately. In this case, do not use the device.
• Clean the accessories and the appliance before use (See ==> Cleaning & Maintenance).
  • Make sure the appliance is completely dry.
• Place the appliance on a horizontal, stable and heat resistant surface that is safe against water splashes.
• Keep the packaging if you intend to store your appliance in the future.
• Keep the user manual for future reference.

NOTE! Due to manufacturing residues, the appliance may emit a light odor during the first few uses. This is normal and does not indicate any defect or hazard. Make sure the appliance is well ventilated.

Operating instructions

1). Preparation

• Open the glass sliding door using the door handle.
• Put the food in the suitable container before placing it inside the appliance. Place it on the shelves and close the glass sliding door.
• Ensure there is enough spacing between the food for the heat to be evenly distributed.
• Add some water into the water bowl and put inside the cabinet.
• Connect the appliance inlet of the detachable power cord to the appliance first, then connect power plug to a suitable electrical power outlet.

NOTE:

• Do not overload the shelves to avoid any damage. Max. loading is about 8 kg.
• Do not use the shelves for storage and processing of acidic, alkaline or salty food.
• There is a cover lid for protection of power cord inlet. There are 2 screws included for fixing the cover lid.

2). Start heating

• Switch ON the appliance by pressing the power switch & the heating indicator lights ON.
• Adjust the temperature setting knob (Range 30°C to 90°C) to the desired temperature.
• When the desired temperature is reached, the heating indicator light goes out.
• Inside cabinet temperature can be checked with the temperature display at the lower front side.
• The food is kept warm with the desired temperature that previously set.
• You can also switch ON the inner light by pressing the light switch.
• CAUTION! RISK OF BURNS! Always open the door using the door handle.
• Some of the parts may become very hot. Wear gloves (not supplied) to remove the food. And do not touch the metal shelves.
• When not in use, set the temperature setting knob to 0^ , switch OFF the power switch and the heating indicator goes out.
• Unplug the appliance from the electrical power outlet.
• Allow the appliance to cool down completely before cleaning or storage.

Cleaning & maintenance

• ATTENTION! Always disconnect the appliance from the power supply and cool down before storage, cleaning & maintenance.
• Do not use water jet or steam cleaner for cleaning and do not push the appliance under the water as the parts will get wet and electric shock might be resulted.
• If the appliance is not kept in a good state of cleanliness, this can adversely affect the life of the appliance and result in a dangerous situation.
• Food residues should be regularly cleaned and removed from the appliance. If the appliance is not cleaned properly, it will reduce its lifespan and may result in a dangerous condition during use.

Cleaning

• Clean the cooled exterior surface with a cloth or sponge slightly dampened with a mild soap solution.
• For reasons of hygiene, the appliance should be cleaned before and after use.
• Avoid water contacting the electrical components.
• Clean the inside of container with a non-abrasive detergent and rinse with clean water.
• Never immerse the appliance in water or other liquids.
• Never use aggressive cleaning agents, abrasive sponges, or cleaning agents containing chlorine. Do not use steel wool, metallic utensils, or any sharp or pointed objects for cleaning. Do not use petrol or solvents!
• No parts are dishwasher safe.

Parts How to clean Remark
All accessories such as rack holders, etc.	Soak in warm, soapy water for about 10 to 20 minutes.Rinse under running water thoroughly.	Dry all parts well at last.
External glass surfaces	Wipe clean with a soft cloth and a little neutral detergent. Make sure no water or moisture enters inside the of the appliance.
Interior glass surfaces	Remove any food deposits.Wipe clean with a soft cloth and a little mild detergent. Make sure no water or moisture enters inside the of the appliance.
Glass door

Maintenance

• Check the operation of the appliance regularly to prevent serious accidents.
• If you see that the appliance is not working properly or that there is a problem, stop using it, switch it off and contact the supplier.
• All maintenance, installation and repair work must be carried out by specialised and authorised technicians, or recommended by the manufacturer.

Transportation and Storage

• Before storage, always make sure that the appliance has been disconnected from the power supply and completely cooled down.
• Store the appliance in a cool, clean and dry place.
• Never place heavy objects on the appliance as this could damage it.
• Do not move the appliance while it is under operation. Dis connect the appliance from power supply when moving and hold it at the bottom.

Troubleshooting

If the appliance does not function properly, please check the below table for the solution. If you are still unable to solve the problem, please contact the supplier/service provider.

Problems Possible cause	Possible solution
When connected to the electrical power supply, the temperature set & the heating indicator lights on. But the appliance does not heat up.	Thermal cut-out activated.	Contact the supplier.
	Heatingelement is burnt out.
When connected to the electrical power supply, switch on and temperature set. The appliance heat up but the lamp indicator does not light up.	The indicator light is defective.

Neither the heating indicator nor the heating elements heat up.

• The power plug is not connected firmly and correctly with the electrical power outlet.

Check the connection and make sure all the connections are correctly connected.

Warranty

Any defect affecting the functionality of the appliance which becomes apparent within one year after purchase will be repaired by free repair or replacement provided the appliance has been used and maintained in accordance with the instructions and has not been abused or misused in any way. Your statutory rights are not affected. If the appliance is claimed under warranty, state where and when it was purchased and include proof of purchase (e.g. receipt).

In line with our policy of continuous product development we reserve the right to change the product, packaging and documentation specifications without notice.

Discarding & Environment

When decommissioning the appliance, the product must not be disposed of with other household waste. Instead, it is your responsibility to dispose to your waste equipment by handing it over to a designated collection point. Failure to follow this rule may be penalized in accordance with applicable regulations on waste disposal. The separate collection and recycling of your waste equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment.

For more information about where you can drop off your waste for recycling, please contact your local waste collection company. The manufacturers and importers do not take responsibility for recycling, treatment and ecological disposal, either directly or through a public system.

DEUTSCH

cerede personer for at undgå fare.

1. Strømbryter
2. Lysbryter
3. Bryter for temperaturinnstilling
4. Indikator for oppvarming
5. Temperaturvisning

Kretsdiagram

(Fig.3 på side 4)

A. Bytt
B. Termostat
C. Bytt
D. Lamp
E. Ikke-selvtilbakestillende termisk utskjæring
F. Selvtilbakestillende termisk utkobling
G. Indikatorlampe
H. Varmeelement

39100 Bolzano (BZ), Italy

Tel: [phone]

Email: [e-mail]

HENDI GmbH

Ehring 15

1208, 12/F Exchange Tower

33 Wang Chiu Road, Kowloon Bay, Hong Kong

Tel: [phone]

Email: [e-mail]

HENDI Romania S.R.L.

https://www.linkedin.com/company/hendi-tools-for-chefs/

www.youtube.com/HendiEquipment

GB: Changes, printing and typesetting errors reserved.