Vera - Baby bed Lionelo - Free user manual and instructions

USER MANUAL Vera Lionelo

10‑ 4 ‑EN Dear Customer! In case of any quesons or comments on the purchased product, please contact us: [e-mail] IMPORTANT Please read this manual before you start using the product to see all its funcons and use it in accordance with intended use. Producer: BrandLine Group Sp. z o. o. ul. A. Kręglewskiego 1, 61-248 Poznań, Poland IMPORTANT! READ

CAREFULLY AND KEEP FOR

Do not use this product without reading the instrucons for use rst.

2. Stop using the product as soon as the child can sit or kneel or pull

3. Placing addional items in the product may cause suocaon.

Do not place the product close to another product, which could present a danger of suocaon or strangulaon, e.g. strings, blind/ curtain cords, etc.

5. Do not use more than one maress in the product.

6. Product should be placed on horizontal oor.

7. Young children should not be allowed to play unsupervised in the

The crib should be locked in the xed posion when the child is le unaended.

9. All assembly ngs should always be ghtened properly and care

should be taken that no screws are loose, because a child could trap parts of the body or clothing (e.g. strings, necklaces, ribbons for babies’ dummies, etc) which would pose a risk of strangulaon.

The maximum thickness of the maress is marked by a red lining on the inside of the crib. Do not use a maress thicker than indicated.

Be aware of the risk of burning cigarees, open res and other sources of strong heat, such as electric bar res, gas res, etc. In the near vicinity of the crib.

DO NOT use crib if any parts are missing, damaged, or broken. Contact Lionelo for replacement parts and instruconal literature if needed. DO NOT substute parts. WARNINGS for maress:

1. Do not use the maress if any part is broken, torn, or missing, use

only spare parts approved by manufacturer.

2. Intended for cots of maximum internal size 93 x 53 cm.

3. Do not use more than one maress in the cot.

4. Be aware of the risk of open re and other sources of strong heat,

such as electric bar res, gas res, etc. in the near vicinity of the cot. Bed components 1.Main body of the bed (g. 1a) 2.Legs (g. 1b) 3.Mosquito net (g. 2) How to assemble

1. Aach the structure to the bed by means of Velcro (g. 3).

Adjust legs to the main body of the bed by pung tubes on each other. You will hear a disncve locking click (g. 4).‑ 6 ‑EN Note! Make sure the legs have been locked and do not move.

Press the central part of the bed until you can unfold it completely (g. 5). Note! Make sure the bed has been unfolded completely and is stable.

4. How to assemble mosquito net:

Unfold the mosquito net and stretch on the bed. Next, aach it by means of fasteners (g. 6). Cradle feature: To use the bed as a cradle, rotate the base slats downwards (g. 7). Folding:

Keep the arm with your hand. Use another hand to pull the tape inside the bed unl you can unfold it completely (fug. 8).

2. If you want to detach legs, press the locking buons located by the

contact of legs and structure. Slide legs down (g. 9).

3. If you want to remove a cover, unfold the bed and then unzip locks on

its edges and remove the cover (g. 10). Maintenance and cleaning:

1. Clean the cover in accordance with guidelines.