InCar Cam 212G Deluxe - Dashcam NEXT BASE - Free user manual and instructions
Find the device manual for free InCar Cam 212G Deluxe NEXT BASE in PDF.
User questions about InCar Cam 212G Deluxe NEXT BASE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Dashcam in PDF format for free! Find your manual InCar Cam 212G Deluxe - NEXT BASE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. InCar Cam 212G Deluxe by NEXT BASE.
USER MANUAL InCar Cam 212G Deluxe NEXT BASE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- This appliance and its antenna must not be co-located or operated conjunction with any other antenna or transmitter.
- A minimum separation distance of 20cm must be maintained between the antenna and the person for this appliance to satisfy the RF exposure requirements.
FCC CAUTION:
Any changes or modifications to the equipment not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
UE SIMPLIFIÉE DÉCLARATION DE CONFORMITÉ
PRODUIT SANS FIL INFORMATION
2400–2483.5 MHz: Wi-Fi (Max 16.3 dBm), BT (Max 6.0 dBm), BLE (Max 6.0 dBm).
INFORMATIONS SUR L'EXPOSITION AUX RF (MPE)
SUPPLIER'S DECLARATION OF CONFORMITY
(47 CFR Section 2.906).
We; Tank Design
(The responsible party, who must be located in the United States)
Hereby, Declare that the essential requirements set out in the 47 CFR Sections 2.906 of FCC, have been fully fulfilled on our product with indication below:
1. Applicant's Info
Company Name: Portable Multimedia Ltd
Mailing Address : Unit 2, Caerphilly Business Park, Van Road, Caerphilly. CF83 3ED. UK
Contact : Graham Lambert
Tel : +44 02920 866429
Email Address : support@nextbase.com
2. Product Info
Product Name : Dash Cam
Model No.: NBDVR212G
Brand Name : Nextbase
3. Applied Standard
Standards
E-CFR Title 47 Part 15 Subpart B—Unintentional Radiators: 2017
Report No. WTS18S05110385E
4. Test Firm Used to Take Measurements:
Name : Waltek Services (Shenzhen) Co., Ltd.
Address : 1/F, Fukangtai Building, West Baima Rd Songgang Street, Baoan District, Shenzhen, Guangdong, People's Republic of China, 518105
Contact Name : Philo Zhong
Tel : +86 755 8355 1033 802
Email : CB@waltek.com.cn
Designation No.: CN1201
FRN : 0027148261
SUPPLIER'S DECLARATION OF CONFORMITY CONTINUED
- FCC Marking

- Responsibilities and obligations
Strictly follow the FCC rules of 2.906, 2.908, 2.909.
- Applicant's Authorization
Company Name: Portable Multimedia Ltd
Mailing Address : Unit 2, Caerphilly Business Park, Van Road, Caerphilly. CF83 3ED. UK
Contact person : Graham Lambert
Signature: C.V. Lambet.
Email Address : support@nextbase.com
Tel : +44 02920 866429
Date : 14th May 2018
- Responsible party in US.
Company name: Tank Design
Mailing Address: 158 Sidney Street, Cambridge, MA 02139, United States
Contact person : Mr Scott Watts
Signature:
Email address : SWatts@tankdesign.com
Tel : (617) 388-8380
Date : 14th May 2018
CARACTÉRISTIQUES DU PRODUIT
text_image
16 MIC 17natural_image
Line drawing of a digital camera with an inset showing its internal component labeled 'm micro SD' (no text or symbols on the device itself)Remarque :
natural_image
Line drawing of a digital camera with internal components and a green lightning bolt symbol (no text or labels)Remarque :
natural_image
Line drawing of a digital camera with a spherical lens and green arrow indicating light (no text or symbols)text_image
NEXT BASE DC-INRemarque :
text_image
Diagram of a medical device with labeled ports and a green arrow indicating direction, accompanied by an inset showing a close-up of the device's internal structure.natural_image
Interior view of a car dashboard and steering wheel (no text or symbols)12-24V DC