M2WL10HB - Speaker Rockford Fosgate - Free user manual and instructions

USER MANUAL M2WL10HB Rockford Fosgate

Dear Customer, Congratulations on your purchase of the world’s nest brand of audio products. At Rockford Fosgate we are fanatics about musical reproduc- tion at its best, and we are pleased you chose our product. Through years of engineering expertise, hand crasmanship and critical testing procedures, we have created a wide range of products that reproduce music with all the clarity and richness you deserve. For maximum performance we recommend you have your new Rock- ford Fosgate product installed by an Authorized Rockford Fosgate Dealer. Please read your warranty and retain your receipt and original carton for possible future use. Great product and competent installations are only a piece of the puzzle when it comes to your system. Make sure that your installer is using 100% authentic installation accessories from Rockford Fosgate in your installation. Rockford Fosgate has everything from RCA cables and speaker wire to power wire and battery connectors. Insist on it! Aer all, your new system deserves nothing but the best. To add the nishing touch to your new Rockford Fosgate image, order your Rockford accessories, which include everything from T-shirts to hats. Visit our web site for the latest information on all Rockford products; www.rockfordfosgate.com or, in the U.S. call 1-800-669-9899. For all other countries, call +001-480-967-3565. Table of Content If, aer reading your manual, you still have questions regarding this product, we recommend that you see your Rockford Fosgate dealer. If you need further assistance, you can call us direct at 1-800-669-9899. Be sure to have your serial number, model num- ber and date of purchase available when you call. Safety This symbol with “WARNING” is intend- ed to alert the user to the presence of important instructions. Failure to heed the instructions could result in severe injury or death. This symbol with “CAUTION” is intend- ed to alert the user to the presence of important instructions. Failure to heed the instructions could result in injury or unit damage.

• To prevent injury and damage to the unit, please read and follow the instructions in this manual.

• If you feel unsure about installing this system yourself, have it installed by a qualied Rockford Fosgate technician.

• Before installation, disconnect the battery negative (-) terminal to prevent damage to the unit, re and/or possible injury. Introduction 2 Introduction 3 Specifications 4-5 Diagrams 6 Wiring Installation Considerations Mounting 7-8 Additional Languages French Spanish German Italian 12 Limited Warranty Information

Continuous exposure to sound pressure levels over 100dB may cause permanent hearing loss. High powered auto sound systems may produce sound pressure levels well over 130dB. Use common sense and practice safe sound.

and associated logos where applicable are registered trademarks of Rockford Corporation in the United States and/or other countries. All other trademarks are the property of their respective owners. Specifications subject to change without notice.3 Specifications ModelM2WL-8 M2WL-8BM2WL-8H M2WL-8HBM2WL-10H M2WL-10HBNominal Diameter - inch (mm) (203mm). (203mm). (254mm).Description2-Way 2-Way 2-WayNominal Impedance (Ohms)4Ω 4Ω 4ΩFrequency Response (Hz)35-24kHz 35-25kHz 20-25kHzPower Handling - Watts (RMS/Peak)250/1000 300/1200 300/1200Sensitivity (2.83V/1M)93.1dB 94dB 97dBGrille/Trim RingYES YES YESLED Current Draw.25 Amps .25 Amps .25 AmpsRecommended Fused Rating1 Amp 1 Amp 1 AmpLED Voltage Range9-16 Volts 9-16 Volts 9-16 VoltsOverall Speaker (A) 9” (230.4mm) (230.4mm)11.50” (292.1mm)Bolt Diameter (B) 7.75” (197.0mm)7.75” (197.0mm)10.06” (255.5mm)Overall Height (C) 12.75” (324.0mm)12.75” (324.0mm)15.23” (386.9mm)Overall Length (D) 14.4” (365.7mm)14.4” (365.7mm)14.68” (372.8mm) *Rockford Fosgate determines its rated frequency response range at -6 dB below its nominal sensitivity at upper and lower extents of a speaker’s output. M2 Wake Can Dimensions

VERIFIED WITH KLIPPEL

To adorn the ‘Veried with Klippel’ mark, the qualifying company’s loudspeaker engineering personnel must be trained and certied by Klippel prior to using the three separate Klippel systems to design, develop and test. Rockford Fosgate has made the investment in Klippel to deliver the best possible speakers and subwoofers to their customers. illus.-1.1

Diagrams Grill Options (Included) Rear LED Ring Rotation Rotate RGB Medallion to look like image aer mounting Wake Cans Speaker Adjustment Remove the speaker to reveal the multi-point mounting option to make sure your speaker is mounted correctly. No matter what direction the speaker is mounted, it should always look like the image above.

illus.-2.1 illus.-3.1 illus.-3.25 Rotation Lock-down Use included Safety Torx Wrench to tighten can to clamp to keep Wake Can from swivling Inside Clamp Wiring Wiring is in clamp, remove top part of clamp to see wiring plug Remove plastic plug to access rotation lock- down torx. Remove rubber plug to access wiring if NOT using plug in clamp Rubber plug to access wiring input plug Outside Clamp Wiring illus.-3.3 illus.-4.1 illus.-4.2 Diagrams6 Contents Installation Considerations Before beginning any installation, follow these simple rules:

1. Be sure to carefully read and understand the instructions

before attempting to install these speakers.

2. For safety, disconnect the negative lead from the battery

prior to beginning the installation.

3. For easier assembly, we suggest you run all wires prior to

mounting your speakers in place.

4. Use high quality connectors for a reliable installation and to

minimize signal or power loss.

5. Think before you drill! Be careful not to cut or drill into gas

tanks, fuel lines, brake or hydraulic lines, vacuum lines or electrical wiring when working on any vehicle. If installation in a boat, take care not to cut or drill through the main hull.

6. Never run wires underneath the vehicle. Running the wires

inside the vehicle or hull area provides the best protection.

7. Avoid running wires over or through sharp edges. Use

rubber or plastic grommets to protect any wires routed through metal, especially the rewall.

• (2) 1.5” to 2.5” Rubber Clamp Inserts and Stainless Hardware

• (2) 2.5” to 3” Rubber Clamp Inserts and Stainless Hardware

• (2) Speaker/RGB Wiring Harnesses

• (1) Pair Stainless Grills (installed)

• (1) Pair Sport Grills

• (1) Allen Bit For Speaker Removal For Rotation

• (1) Safety Torx Wrench Mounting

1. Determine where the speakers will be mounted. Be sure

that the mounting location has suicient clearance in all direction for the speaker to swivel; conduct a full rotation to ensure there is not obstruction.

2. Mark the locations on the underside of the mounting surface

for the speaker mount and wire harness. Drill a 7/16” for the wire harness. If you are not using the wake can clamp or do not running the wiring into the bar mounting the wake can, use the speaker/RGB input on the back of the wake can under the rubber plug illus.-4.2

3. Insert the supplied grommet and feed the wire harness

through. Be sure to observe proper polarity when connecting the wires. The speaker harness’s negative wire is the BLACK 18 AWG wire and the Positive is the RED 18 AWG wire in the 6 pin connector illus.-4.3

4. Feed the speaker harness through the mount. Using the

supplied hardware, through bolt and tighten the mount securing it.

5. Remove the plastic cover over the safety torx bolt to allow

access to loosen/tighten the wake can. Do this to adjust the angle of the wake can, then tighten the safety torx bolt to make sure it does not move. Replace plastic cover over safety torx bolt illus.-3.3

6. Rotate the RGB medalion on the rear of the wake can to

look like the image in illus.-3.2 . This can be turned le or right to align the medalion. You will hear/feel a clicking when you rotate it.

7. If you need to rotate the speaker, remove the (6) screws

holding th speaker and grill on. Pull the speaker slightly towards you and rotate it until it looks like illus.-2.1 . Use the predrilled holes to reinstall the speaker illus.-3.1

che ssano l’altoparlante e la griglia. Tirare leggermente l’altoparlante verso di sé e ruotarlo nché non sembra. Utilizzare i fori preforati per reinstallare l’altoparlante. illus.-3.1 illus.-2.1 illus.-3.2 illus.-3.3 illus.-4.3 illus.-4.2 illus.-4.2 illus.-4.3 illus.-3.3 illus.-3.2 illus.-2.1 illus.-3.19101112 Warranty Rockford Corporation oers a limited warranty on Rockford Fosgate products on the following terms: Length of Warranty POWER Ampliers – 2 Years BMW® Direct Fit Speakers – 2 Years PUNCH® & PRIME® Ampliers – 1 Year Speakers, Signal Processors, Accessories and Capacitors – 1 Year All marine, motorcycle, motorsport products - 2 Years Any Factory Refurbished Product – 90 Days (receipt required) What is Covered This warranty applies only to Rockford Fosgate products sold to consumers by authorized Rockford Fosgate dealers in the United States of America. Products purchased by consumers from an Authorized Rockford Fosgate Dealer in another country are covered only by that country’s Distributor and not by Rockford Corporation. Who is Covered This warranty covers only the original purchaser of Rockford product purchased from an authorized Rockford Fosgate dealer in the United States. In order to receive service, the purchaser must provide Rockford with a copy of the receipt stating the customer name, dealer name, product purchased and date of purchase. Products found to be defective during the warranty period will be repaired or replaced (with a product deemed to be equivalent) at Rockford’s discretion. What is Not Covered

1. Damage caused by accident, abuse, improper installation, operations, the, water (on non-Element Ready products).

2. Any cost or expense related to the removal or reinstallation of product.

3. Service performed by anyone other than Rockford or an authorized Rockford Fosgate service center.

4. Any product which has had the serial number defaced, altered, or removed.

5. Subsequent damage to other components.

6. Any product purchased outside the U.S.

7. Any product not purchased from an authorized Rockford Fosgate dealer. Refer to rockfordfosgate.com dealer locator for more detail. Limit on Implied Warranties Any implied warranties including warranties of tness for use and merchantability are limited in duration to the period of the express warranty set forth above. Some states do not allow limitations on the length of an implied warranty, so this limitation may not apply. No person is authorized to assume for Rockford Fosgate any other liability in connection with the sale of the product. How to Obtain Service Please call 1-800-669-9899 for Rockford Customer Service. You must obtain an RA# (Return Authorization number) to return any prod- uct to Rockford Fosgate. You are responsible for shipment of product to Rockford. EU Warranty This product meets the current EU warranty requirements, see your Authorized dealer for details.