GT527 Barber Style - Beard trimmer GAMA - Free user manual and instructions

USER MANUAL GT527 Barber Style GAMA

AND KEEP FOR FUTURE NEEDS

12- Always turn this appliance off before changing one of its

Thank you for having purchased this GAMA product. We’re sure that you’ll appreciate all the care that has gone into its design and manufacture. GAMA research constantly combines innovation and technology to create premium-quality products. Excellent performance is guaranteed since we apply the most advanced methods and use the best materials. This guarantees excellent performance, designed for the most demanding clients who wish to achieve excellent results. Read these instructions carefully before use and keep them for future reference. IMPORTANT: READ CAREFULLY BEFORE USING THE APPLIANCE. SAVE THESE INSTRUCTIONS. 1-Do not use the appliance with wet hands, in a damp environment or on wet surfaces. Do not immerse the appliance in water or other liquids. 2- Do not use this appliance near bathtubs or other vessels containing water. 3- Unplug the appliance when it is off because proximity to water could pose a threat; be extra careful when using it in the bathroom 4- Do not use this electric appliance if it has been in contact with liquids, if its electric cord is damaged or if its body and/or accessories show clear signs of damage. If the appliance does not work properly, disconnect it from the power immediately

9The symbol on the product or on the package indicates that the product should not be considered as normal domestic waste; once you have decided to dispose of it, it should be taken to the proper collection point for recycling electrical and electronic appliances. When you dispose of this product correctly, you help prevent potential negative consequences for the environment and health, which could derive from improper treatment of the product. For more detailed information on recycling this product, contact the municipal office, the local waste disposal service or the shop where it was purchased. LIMITED WARRANTY PERIOD: Duration of warranty period: 1 or 2 years depending on customer category, in compliance with European Directive 1999/44/EC. For support service under warranty, please take the original purchase ticket / sales receipt to the shop where the product was purchased. The product will be repaired free of charge or immediately replaced with similar product of equal or greater value.

BEFORE USING THE APPLIANCE: Before charging the beard trimmer for the first time we recommend fully discharging the battery and then fully charging it. accessories. 13- For additional protection, the installation of a residual current device (RCD) having a rated residual operating current not exceeding 30 mA is advisable in the electrical circuit supplying the bathroom. Ask your installer for advice. This appliance must not be used by people with reduced physical, motor or mental capacity (including children), or with limited knowledge of the appliance itself, unless such people have been trained for its use or are under adequate supervision to ensure their own safety. Children must be under supervision at all times to ensure that they do not play with the appliance. Do not use this appliance near bathtubs or other vessels containing water.

111. Make sure that the appliance is switched off.

2. Plug the adapter into the USB port of your PC, Notebook or Tablet and then connect it to the device. A

standard USB adapter (5V 1000 mA) may be used. The charging LED will light up and remain red for the whole charging process.

3. The first charge takes 16 hours. Subsequent charges take about 8 hours. When fully charged, the battery

will last about 45 minutes.

4. Once it is fully charged, disconnect the adapter from the USB port of your PC, Notebook or Tablet or from

5. If the beard trimmer charge runs out during use, since it a slow-charging cordless product, it must be

charged for around 2 hours before using it again. The duration of the battery varies based on usage frequency and times. To increase the lifespan of the batteries, this procedure should be carried out at least twice every 12 months, discharging the battery completely and recharging it for the maximum time. If the appliance is not used often, remember in any case to carry out a charging cycle every so often during the year to keep it working efficiently. On the contrary, when the charging is finished, do not keep the appliance connected to the mains to prevent the battery from overcharging and damaging the appliance.

WARNING: Do not attempt to replace the internal battery of the beard trimmer. This can lead to the risk

of fire or electric shock. Tampering invalidates the warranty on the product. CAUTION: Lubricate the blade before the first use. Read the instructions contained in the section “HOW AND WHEN TO

• Insert the attachment. This operation should always be done with the beard trimmer turned off.

• Turn on the beard trimmer by pressing the (O/I) button.

• Turn off the beard trimmer by pressing the (O/I) button.

INSERTION OF THE COMB: The supplied comb has two lateral seats for an easier snapping on the base. To insert it on the beard trimmer, lay the blade on the comb and make it slide on the comb until you hear a slight click: the comb will thus be properly inserted. To remove the comb just extract it making the blade slide outwards. REMOVAL OF THE HEAD: To remove the head, grasp the beard trimmer by the front side, place your thumb over the head and push backwards until the head is completely removed. INSERTION OF THE HEAD: There is a black interlocking seat inside the upper part of the beard trimmer; on the head there is a black lever. To insert the head, place the black lever on the interlocking seat; push toward the front of the appliance until you hear a slight click: the insertion procedure is now complete. CUTTING LENGTH ADJUSTMENT: The GT527 Sport beard trimmer offers the possibility of making finishing touches of 0.4 mm (if used without any guide comb attached) and trimming beard with the following lengths: 3, 4, 5 , 6 and 7 mm. CLEANING AND MAINTENANCE: A clean and properly lubricated beard trimmer considerably improves its capacity and cutting precision. CLEANING THE HEAD: Before any cleaning operation, make sure that the appliance is properly turned off and disconnected from the power outlet. Remove the accessory if it is inserted. Using the special brush supplied, remove any hair residues between the blades and the back of the blade head. NEVER DISASSEMBLE THE HEAD OF THE BLADE OR YOU WILL INVALIDATE THE WARRANTY ON

Would you like to find out the latest news and get many useful tips for perfect hair? Visit The Hair Voice, GAMA new blog dedicated to hair beauty! Seguici su / Follow us on