Big Wheeler 1601 E - Lawn mower Güde - Free user manual and instructions
Find the device manual for free Big Wheeler 1601 E Güde in PDF.
User questions about Big Wheeler 1601 E Güde
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Lawn mower in PDF format for free! Find your manual Big Wheeler 1601 E - Güde and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Big Wheeler 1601 E by Güde.
USER MANUAL Big Wheeler 1601 E Güde
ENGLISH Please read the instructions carefully before starting the machine.
To enjoy your new BIG WHEELER 1601 E MOWER as long as possible, please read carefully the Operating Instructions and the attached safety instructions before putting the appliance into operation. We also recommend keeping the Operating Instructions for future reference.
We reserve making technical changes to improve the appliance as part of the continuous product development.
This document represents the original Operating Instructions.
Supply includes
Take the appliance out of the transport container and check whether there are the following parts:
- Mower including switching element and feeder cable
Rear wheels and wheel covers (2 pcs) - Front wheels and wheel covers (2 pcs)
- Arch handle
- Posts (2 pcs)
- Grass catcher (disassembled)
- Cable pull relief equipment
- Cable clamps (1 pcs)
- Original Operating Instructions
If any parts are missing or are damaged, please contact your dealer.
The appliance weight in assembled condition is 13kg . If necessary, lift the appliance off the transport container in two people.
Appliance description
- Safety button
- Starting lever
- Cable pull relief equipment
- Sliding handle
- Grass catcher
- Wheels
- Cutting height setting lever
- Carrying handle
- Cable clamp
- Feeder cable
- Screws
- Screws
BIG WHEELER 1601 E mower technical specifications
Voltage/frequency: 230V\~50Hz
Engine power: 1,600 W
Engine speed: 3500 per min
Cutting width: 380 mm
Grass catcher capacity: 40 litres
Cutting height setting: 5 levels
Noise: L wA 96dB
Assembly dimensions in mm: 1290 × 440 × 965
Weight: 13 kg
General safety instructions
Please read carefully these Operating Instructions.
Familiarise with the control elements and appropriate use of the appliance. Keep the Operating Instructions for future reference.
Keep your place of work clean!
Mess in the place of work may result in injuries.
Consider the environment
Do not expose the appliance to rain.
Do not use the appliance in a wet or moist environment.
Provide adequate lighting.
Do not use the appliance near flammable liquids or gases.
Keep other persons in a safe distance!
Do not let other persons, especially children, touch the appliance and cable. Keep them in a sufficient distance from the place of your work.
Store the appliance properly!
An appliance that is not used should be kept in a dry, locked place inapproachable to children.
Do not overload your appliance!
Work within the specified output range.
Use the right appliance!
Do not use the appliance for purposes for which it has not been designed.
Look after your appliance!
Follow the servicing regulations and appropriate instructions.
Check regularly the appliance cable and have it replaced by an authorised professional if damaged.
Check regularly the extension cable and replace it if damaged. Keep the handles clean with no sign of oil and grease.
Be careful!
Pay attention to what you are doing. Use common sense when working. Do not use the appliance when you are tired.
CAUTION!
Use any other accessory equipment may lead to a risk of injury.
Have your appliance repaired by an electrician only!
This appliance corresponds to appropriate safety regulations. Repairs may only be executed by an electrician, using original spare parts; otherwise, the user will face a risk of injury.
Never cut when there are persons, especially children, around.
Cut under adequate visibility only.
Appliance-specific safety instructions
Rotating knife
Perform any work/adjustment on the appliance only when the engine is switched off, appliance unplugged and the cutting knife idle.
Before cutting
Cut only with solid boots and long trousers; never cut when barefooted or in sandals.
Check the ground where the appliance is to be used for items that may get caught and be thrown-away by the mower and remove such items (stones, branches, etc.).
Check the appliance cables for any damage and age (fragility) and have them repaired by an electrician if necessary.
Check regularly the grass catcher for any wear and deformation.
Never use the appliance without a completely fitted grass catcher or buffer. Risk of injury.
Before using the appliance, check (visually) the cutting tools and their fastening means for any damage.
When cutting
Do not incline the appliance when starting the engine and if the appliance is plugged.
Keep the safe distance delimited by the handles.
Switch on the engine only if your legs are in a safe distance from the cutting knife.
Make sure your body posture is safe. Move the mower carefully forward.
Cutting on slopes:
- Cut across the slope at all times, not up and down
- Be particularly careful when changing direction
- Do not cut on slopes that are too steep
Be especially careful when reversing or pulling the mower to yourself.
Never touch the rotating cutting knife.
The knife keeps rotating for a few seconds after switching the appliance off. Never touch the rotating knife.
Never stand before the grass ejection hole when opened.
Never open the grass ejection hole when the engine is running.
Never operate the mower on gravel when the engine is running. RISK OF HITTING STONES!!!
Do not cut in wet grass.
Under the following circumstances, the appliance must be switched off, unplugged and you must wait until the appliance fully stops.
- When leaving the mower
- When releasing a locked knife
- When setting the cutting height
- When emptying the grass catcher
- When hitting a foreign item
If the mower strongly vibrates due to unbalance (to be switched off immediately and the cause identified) - When lifting and carrying the mower
- When inclining or transporting the mower (e.g. from/to the grass or via roads).
Servicing
ROTATING CUTTING KNIFE!!!
Every time the appliance is to be serviced and cleaned:
- Unplug the appliance.
- Do not touch the rotating edges.
Check regularly all visible fastening bolts and nuts, especially on the cutting bar if tightened and tighten them if necessary.
Do not store the mower in wet rooms.
Any worn or damaged parts must immediately be replaced for safety reasons.
Spare parts of the manufacturer to be used only.
Marking
Product safety:
| CE | ☐ |
| Product corresponds to appropriate EU standards | Protection class II |
Prohibitions:
| Protect against rain and moisture! Do not cut wet grass! |
Warning:
| Warning/ caution | Risk of injury by thrown-away items. Keep bystanders in safe distance from the mower. | |||
| Switch the engine off and unplug the appliance before any adjustment and cleaning or if the feeder cable has got caught or been damaged. | Risk as a result of damaged feeder cable. Keep the feeder cable in safe distance from the appliance and cutting knives! | |||
| Caution - sharp cutting knives!Keep your feet and hands in safe distance.Risk of injury! | ||||
Commands:
| Please read carefully the Operating Instructions. Before using the appliance, familiarise carefully with the appliance operational elements.. | Use protective glasses and head phones |
Use protective gloves Use
safety shoes
Environment protection:
| PAP | |
| Dispose waste professionally so as not to harm the environment. | Packing cardboard material may be delivered to collection centres for recycling. |
| Any defective and/or disposed electric or electronic appliances must be delivered to appropriate collection centres. |
Package:
| J | 11 |
| Protect against moisture This side up | |
| Interseroh Transportation 85464 | |
| Interseroh-Recycling | |
Technical specifications:
| Connection Engine power | |
| Engine speed Cutting width | |
| Grass catcher capacity Weight | |
| Noise | |
Training
Please read carefully the Operating Instructions and the servicing instructions. Familiarise thoroughly with the controls and proper using of the appliance. You must know how the appliance works and how the controls may quickly be switched off.
Never let children work with the appliance. Never let an adult person work with the appliance without proper training.
Do not let any persons, especially small children and pets, to the place of your work.
Be careful to prevent slipping of falling.
If the product is to be used by children below the age of 8 or persons with reduced physical, sensory or mental skills or with a lack of experience and knowledge, they must be supervised or instructed in the safe use of the appliance and understand the resulting risks. Children must not play with the appliance. Cleaning and user maintenance must not be performed by children without supervision.
Use as designated
The BIG WHEELER 1601 E MOWER has been designed to treat grass plots and lawns in private spaces.
Works other than those for which the appliance has been designed and that are specified in the Operating Instructions cannot be performed with this appliance.
Any other use is in conflict with the designation. The manufacturer will not be liable for any consequential damage and injuries. Please be sure to know that our appliances have not been designed to be used for industrial purposes.
Assembly
Fastening the handles
- Insert the two posts in appropriate holes on the mower and fasten them using two bolts (included in the supply).
- Shift the cable pull relief equipment above the arch handle and fasten it using the holding clamps (included in the supply).
- Now fasten the arch handle to the bottom posts using bolts and fly nuts (included in the supply).
- Fasten the 2-point safety switch cable to the arch handle and the post using two cable clamps.
Grass catcher assembly
- Assemble the grass catcher as shown in the picture.
Operation
Rotating knife
Perform any work/adjusting on the appliance only when the engine is switched off, appliance unplugged and the cutting knife idle.
Operation in general
Grass catcher fitting
- Lift the buffer and fit the grass catcher in the appropriate fixture on the back of the mower.
- Lower the buffer.
Cutting height setting
Press the cutting height setting lever outwards and let it snap in the required cutting height position.
Switching the mower on/off
Switch on the mower on a level surface. Do not switch the mower in high grass - incline it in high grass if necessary.
Switching the engine on
Make a loop from the end of the extension cable and hang it on the cable pull relief equipment.
- Plug the mower.
- Press the ON button.
- Pull the starting lever while the ON button is pressed.
- Release the ON button.
Switching the engine off
- Release the starting lever and unplug the feeder cable.
Grass catcher emptying
- Unhook and empty the grass catcher.
- Clear the obstructed cutting mechanism if necessary.
- Refit the grass catcher.
Warranty
A warranty period of 12 months applies to commercial use and 24 months apply to private use and commences on the day of purchase of the device.
Warranty applies exclusively to failures due to defective material or workmanship. An original sale slip with indication of date of sale must be presented in case of claiming for the warranty rights.
Warranty does not cover unprofessional use such as device overload, violent use, damage caused by third party or foreign materials, failure to comply with operations and assembly manual, and normal wear and tear.
Residual risks and protective measures
Mechanical residual risks:
| Risk Description Protective measure(s) | |
| Cutting, amputation | Rotating knives may cause serious cutting injuries or amputate parts of the body. |
| Getting caught, wound | Rotating knives may catch the feeder cable and wind it or cut it off. |
Electrical residual risks:
| Risk Description Protective measure(s) |
| Direct electrical contactCable may be cut off by knives.Work on electric connection with (Fl) only. |
Other risks
| Risk Description Protective measure(s) | |
| Thrown-away items | Thrown-away stones or soil may cause injury. |
Ergonomic principles neglecting
| Risk Description Protective measure(s) | ||
| Inadequate local lighting | Inadequate lighting/poor visibility represents a high safety risk. | Provide adequate lighting or good visibility whenever working with the appliance. |
Behaviour in case of emergency
Provide necessary first aid treatment corresponding to the injury nature and seek qualified medical help as soon as possible.
Protect the injured person from other injuries and calm him/her down.
First aid kit must always be available in the place of your work in case of accident in accordance with DIN 13164. Material taken out of the first aid kit needs to be supplemented right away.
If help is needed, please provide the following details:
- Place of accident
- Accident nature
- Number of injured persons
- Injury type
Disposal
The disposal instructions are based on icons placed on the appliance or its package. The description of the meanings can be found in the "Marking" chapter.
Transport container disposal
The container protects the appliance against damage during transport. Container materials are usually selected so as not to harm the environment and dispose them in an environment-friendly manner.
Returning the container back in the circulation saves raw materials and reduces waste disposal costs.
Parts of the container (e.g. foils, styropore) can be dangerous to children. Risk of suffocation!
Keep parts of the container out of reach of children and dispose them as quickly as possible.
Operator requirements
The operator must carefully read the Operating Instructions before using the appliance.
Qualification
No special qualification is necessary for using the appliance apart from detailed instruction by an expert.
Minimum age
The appliance can only be operated by persons over 18 years of age. An exception includes youngsters operating the appliance within their professional education to achieve necessary skills under trainer's supervision.
Training
Using the appliance requires only appropriate instruction by a professional or reading the Operating Instructions. No special training necessary.
Maintenance
Do you have any technical questions? A claim? Do you need spare parts or the Operating Instructions?
You will be helped quickly and without needless bureaucracy at our webpage www.guide.com in the Services part. Please help us be able to assist you. To be able to identify your appliance when claimed, we need to know its serial No., order No. and year of production. All these details can be found on the type label. Enter the details below for future reference.
Serial No.
Order No.
Year of production:
Tel.: +49 (0) 79 04 / 700-360
Fax: +49 (0) 79 04 / 700-51999
E-Mail: support@ts.guede.com
Important information for the customer
Please be sure to know that returning the product in or after the warranty period must be made in the original packaging.
Servicing
Rotating knife
Perform any work/adjusting on the appliance only when the engine is switched off, appliance unplugged and the cutting knife idle.
Servicing works not explicitly specified in these Operating Instructions must only be provided by an authorised staff as there may be dangerous situations that the operator is unable to handle. Spare parts may only be replaced by authorised staff.
Cleaning
Every time the mower was used, clean it using a handbrush.
Do not spray water on the mower in any case.
Winterising
Clean the mower properly.
Store the mower in a dry room.
Knife replacement
Rotating knife
Perform any work/adjusting on the appliance only when the engine is switched off, appliance unplugged and the cutting knife idle.
Wear protective gloves when replacing the knife.
Use the supplied wrench to release the bolt on the knife. The cutting knife may now be removed.
Troubleshooting
The table shows possible failures, their possible causes and removal options. However, if you are unable to remove the problem, contact a professional to assist you.
- Switch the appliance off and unplug it before cleaning and cleaning.
Risk of electric shock.
| Symptom Possible cause Removal | ||
| Engine not starting | No system voltageDefective On/Off buttonDefective engineGrass is too highWorn-out carbon brushes | Check the outlet,cable, conductor, plug and have them repaired by an electrician if necessaryRepair by anelectricianRepair by anelectricianIncrease the cutting height by pressing the sliding handle down and lift slightly the front wheelsReplacement by anelectrician |
| Engine failing | Obstruction by foreign items | Remove the foreign items |
| Unsatisfactory cutting result; engine running heavy | Grass is too lowBlunt knifeObstructed knife areaKnife fitted inappropriately | Lower the cutting heightHave the knife sharpened or replace itRemove the obstructionFit the knife properly |
| Cutting knife not rotating | Obstructed knifeBolt on the knife is loose | Remove the grassTighten the bolt on the knife |
| Abnormal sound, clattering or unusually strong vibrations | Bolt on the knife is looseDamaged knife | Tighten the bolt on the knifeHave the knife replaced |
Introduction
Dimensioni in mm: 1290× 440× 965
Peso: 13 kg
Translation of the EC-Declaration of Conformity
We, hereby declare the conception and construction of the below mentioned appliances correspond - at the type of construction being launched - to appropriate basic safety and hygienic requirements of EC Directives.
In case of any change to the appliance not discussed with us the Declaration expires.
Notified Body: No: Name: Adress:
Type Ex.Cert.-No.:
97/68/EC Emission No.:
2000/14/EC_2005/88/EC
